design for disable – toilet details

05/03/2023

DESIGN FOR DISABLE - TOILET DETAILS 1

DESIGN FOR DISABLE – TOILET DETAILSMUKUND SUTHAR & SAKSHAM GOYAL

05/03/2023DESIGN FOR DISABLE - TOILET DETAILS

2

AIMAS AN ARCHITECTOUR RESPONSIBILITY IS TO INTEGRATE DISABLE PEOPLE INTO THE SOCIETY IN ORDER FOR THEM TO TAKES AN ACTIVE PART IN SOCIETY AND LEAD A NORMAL LIFE. TO BE ACTIVE, A DISABLE PERSON SHOULD ABLE TO COMMUTT BETWEEN HOME, WORK AND OTHER DESTINATIONS THE TECHNICAL AIM OF THE PRESENTATON IS TO PROVIDE A BARRIER-FREE ENVIRONMENT FOR THE INDEPENDENCE, CONVENIENCE AND SAFETY OF ALL PEOPLE WITH DISABILITY.

IN THE PHYSICAL TERMS, THE PROVISIONAL OF A BARRIAER-FREE ENVIROMENT CAN BE THE UNDERSTAND IN FOUR COMPLEMENTARY DOMAIN :-INSIDE BUILDINGIN THE IMMEDIATE VICINITY OF BUILDINGSON THE LOCAL ROAD AND PATHSIN OPEN AREA AND RECREATIONAL AREAS.


3

SIGNAGES


4

SPACE REQUIREMENT


5

TOILET LAYOUTSOME POINTS TO REMEMBER :- THE MIN. SIZE SHALL BE 1500 X 1750 mm. TURNING CIRCLE OF 1500mm DIA ARE RECOMMENDED

INSIDE THE WASHROON TO ALLOW FOR FULL TURN MOVEMENT OF A WHEELCHAIR.

THE PARALLEL APPOACH, WHICH IS THE EASIEST. THE DIAGONAL

APPROACH. WHICH IS DIFFCULT


6

TOILET FLOOR SHALL HAVE A NON-SLI SURFACE WITHOUT ANY LVL. DIFFERECE.

GUIDING BLOCK NEAR THE ENTRY SHOULD BE HAVE A TEXTURAL DIFFERENCE, (E.G. DIAMON TILES, PRIMA REGINA TILES, UNDRESSED GRANITE).

LIGHT WEIGHT PVC DOOR SHUTTER SHOULD BE PROVIDED AS A SLIDING DOOR.

PROVISIONAL OF VERTICAL & HORZONTAL RAIL AS 40mm C.P. STEEL PIPE.


7

TOILET LAYOUT - 1


8

TOILET DETAIL – DOOR


9

TOILET DETAIL – HAND RAIL


10

TOILET DETAIL–WATERCLOSET(WC) FLUSH VALVE IS ON WIDE SIDE OF THE

ACCESSIBLR WATER CLOSET GRAB BARS REQUIRED


11

TOILET DETAIL–WATERCLOSET(WC)

HEIGHT OF ACCESSIBLE WATER CLOSET SHALL BE 430 – 485 mm MEASURED TO THE TOP OF THE TOILET SEAT.


12

TOILET DETAILS – SPACE & REACH SPACE ALLOWANCE & REACH RANGES MIN CLEAR WIDTH FOR WHEELCHAIR

PASSAGE – 800 – 1000 mm.


13

TOILET DETAILS–LAVATORIES&MIRRORS

Lavatories shall be mounted with the rim or counter surface no higher than 850mm above the finished floor Provide a clearance of at least 725mm above the finished floor to the bottom of the apron.

Clear floor space- 750mm X1200mm shall be provided in front of lavatory.


14



15

Hot water and drain pipes under lavatories shall be insulated or otherwise configured to protect against contact.



16

TOILET LAYOUT - 2 ACCESSIBLE TOILET AND SHOWER

COMPARTMENT


17

TOILET LAYOUT - 2 ACCESSIBLE TOILET AND SHOWER

COMPARTMENT

design for disable – toilet details

Design