UNIVERSITY OF PETROLEUM AND ENERGY STUDIES

COLLEGE OF ENGINEERING STUDIES

Department: Electrical Power & Energy

Synopsis of Minor Project

Branch & Semester -5th Sem(B2)

Roll No. SAP Id Name

R630214004 500040256 ABHISHEK SAROJ

R630214078 500041097 PRABHAT KAUSHIK

TOPIC OF THE PROJECT:Design & fabrication of Power generating system from speed breakers.

MENTOR/GUIDE:Mr. PRASHANT SHUKLA & Mr. R.M REDDY

______________________________________________________________________________

Details of Project

__________________________________________________________________

OBJECTIVE:In this project we will be fabricating technology to generate electricity from speed breakers in which the system used is reliable and this technique will help conserve our natural resources.

The design of power generating speed breaker has concept of setting up a roller mechanism in the speed breakers which will be rotated by the moving vehicles due to friction .Its shaft will be connected to the electric dynamo and it will produce electrical energy proportional to traffic density. This generated power can be regulated for continuous supply. The generated power can be used for general purpose like streetlights, traffic signals. The electrical output can be improved by arranging these power humps in series this generated power can be amplified and stored by using different electric devices.

.

SCOPE OF WORK:

ENERGY CONSERVATION & ECONOMY

Electricity plays a very important role in our life”. Due to population explosion, the current power generation has become insufficient to fulfill our requirements. As a large amount of energy is wasted at the speed breakers through the dissipation of heat and also through friction, every time a vehicle passers over it. There is great possibility of tapping this energy and generating by making the speed-breaker as a power generation unit.

In coming days, this will prove a great boon to the world, since it will save a lot of electricity of power plants that gets wasted in illuminating the street lights due to long transmissions. As the conventional sources are depleting very fast, it’s high time to think of alternative resources. We got to save the power gained from the conventional sources for efficient use. So this project not only provides alternative but also adds to the economy of the country. This way we can generate green, pollution-free alternative source of electricity, by the moving vehicles on the road.

WORKING PRINCIPLE This project explains the mechanism of electricity generation from speed breakers. The friction force due to vehicle movement acted upon the speed breaker system will make the breaker move in opposite direction and the model will be having an Electro-kinetic energy conversion system which will be transforming this kinetic energy into electricity.

The speed breaker arrangement will be having a protruded rollerat its top which will be having contact with the high frictional surface tires of the vehicle. The roller will be having its support on freely moving ball bearings and on the outer side of it will be a small gear welded which will transfer the rolling motion of roller to the generating unit which will be arranged inside the ground.The power generating unit will be consisting of the fly wheel, dynamo, regulating circuit, battery, wires, diodes and other construction elements.The chain coming from roller will transmit the mechanical power of rotation from to roller to the flywheel. The flywheel will be further mechanically coupled to a generator of desired specifications as per the values of torque generated by the vehicle’s motion.This speed of flywheel is sufficient to rotate the rotor of a generator and is fed into the rotor of a generator. The rotor which rotates within a static magnetic stator cuts the magnetic flux surrounding it, thus producing the electric motive force (emf).This regulated emf is now sent to the storage battery where it is stored during the day time and can be used in night time for providing power to street lights.

COMPONENTS TO BE USED

FLY WHEEL:The primary function of flywheel is to act as an energy accumulator. It reduces thefluctuations in speed. It absorbs the energy when demand is less and release the samewhen it is required.

ROLLER SHAFT:It is a rotating element, which is used to transmit power from one place to anotherplace. It supports the rotating elements like gears and flywheels. It must have hightorsional rigidity and lateral rigidity.

SPRINGS:It is defined as an elastic body whose function is to distort when loaded and torecover its original shape when the load is removed. It cushions, absorbs or controlsenergy either due to shocks or due to vibrations.

BEARINGS:A bearing is a device to allow constrained relative motion between two or more parts, typically rotation or linear movement. It permits relativemotion between the contacting surfaces while carrying the loads. They reduce the frictionand transmit the motion effectively.Bearings may be classified broadly according to the motions they allow and according to their principle of operation as well as by the directions of applied loads they can handle. The type of bearing used here is rolling element type bearing which is widely used, relatively high friction,

suffers from station in some applications. Depending upon the application, lifetime can be higher or lower than rolling element bearings.

ELECTRIC DYNAMO:It is a device, which converts mechanical energy into electrical energy. Its work is based on “faraday’s laws of electromagnetic induction”. After the calculation of torque produced and the revolutions per minute , the voltage & current specifications will be decided and accordingly the desired dynamo will be installed into the system.

BATTERY:

A battery is a device that converts chemical energy contained within its active materials directly into electric energy by means of redox reaction. This type of reaction involves the transfer of electrons from one material to another via an electric circuit.For the purpose of lightning a street light for 12 hours we will use dry lithium-ion battery which will be charged from the power output of generator and will store the charge continuously. This stored current will be used in the night time for street lightening purpose.

DESCRIPTION OF THE TOTAL WORK ALONGWITH TIME FRAME FOR ACTIVITY

Month Activities Planned

Aug-Sept

Gathering and analysis of data required for the designing of the project.

Oct Summarization of the data gathered and calculation.

Nov-Dec

Virtual designing and modeling.

ADVANTAGES & FUTURE SCOPE1. Power generation with low cost and using non-conventional energy sources which will help us to

conserve the conventional energy sources to meet the future demand. 2. By using this method, electricity will be generated throughout the year without depending on

other factors.

3. Easy for maintenance and no fuel transportation problem. 4. Pollution free power generation. 5. Very less floor area required and no obstruction to traffic. 6. No need of manpower during power generation.