description and instructions for the use of position lights mark i and mark ii
TRANSCRIPT
8/8/2019 Description and Instructions for the Use of Position Lights Mark I and Mark II
http://slidepdf.com/reader/full/description-and-instructions-for-the-use-of-position-lights-mark-i-and-mark 1/8
BOX JU rurn
/
m
DESCRIPTION AND INSTRUCTIONS
FOR THE
USE OF POSITION LIGHTS
WASHINGTONAOllSfi C\ *V
micuisirjci \ j^y
8/8/2019 Description and Instructions for the Use of Position Lights Mark I and Mark II
http://slidepdf.com/reader/full/description-and-instructions-for-the-use-of-position-lights-mark-i-and-mark 2/8
V-
THE
GENERAL SERVICE SCHOOLSmtm
LIBRARY
b
Class NtJMßEß__¥_949_3'! :?ls_
Accession Number. ___^?9§^
bneral.
i*
i'
8/8/2019 Description and Instructions for the Use of Position Lights Mark I and Mark II
http://slidepdf.com/reader/full/description-and-instructions-for-the-use-of-position-lights-mark-i-and-mark 3/8
WAR DEPARTMENT,
Washington, December 15, 1917."The following pamphlet entitled Description and Instruc-
tions for the Use of Position Lights, Mark Ind Marl II," ispublished for the information of all concerned.
[353.51, A. G. O.]
order of the Secretary of War.
JOHN BIDDLE,
Major General, Acting Chief of Staff.Official;
h.p.McCain,—he Adjutant General.
82757° 18 8
8/8/2019 Description and Instructions for the Use of Position Lights Mark I and Mark II
http://slidepdf.com/reader/full/description-and-instructions-for-the-use-of-position-lights-mark-i-and-mark 4/8
TABLEOF CONTENTS.
Page.
Description and instructions for the use of position lights,
MarkInd Mark—IIPosition light Mark I .____ '6
Description of position light ________: : 5
Position light Mark II(red and green) __„_;__ 6
To use the light—.— _^,___^_ ___-__. __^._ v"/ 5
Position light—Mark II(white) ; 6
Description of the position light ; 6
To use the—light___i..
\u25a0__ 3 6
;
4
8/8/2019 Description and Instructions for the Use of Position Lights Mark I and Mark II
http://slidepdf.com/reader/full/description-and-instructions-for-the-use-of-position-lights-mark-i-and-mark 5/8
TRMNG COMPOUND
'PASTBOAffO CW£ft
MAWM COMPQS/t/OM
\u25a0tiA/ae coMPosflmt
/vs/rim usht m/irki
T&OTEX'
8/8/2019 Description and Instructions for the Use of Position Lights Mark I and Mark II
http://slidepdf.com/reader/full/description-and-instructions-for-the-use-of-position-lights-mark-i-and-mark 6/8
ii i ii
lIiIi I
i
i
Ii<44
i
i
L I 1
N
i Ii V \u25a0»\u25a0u25a0»\u25a0 .33.iiI!I!
wllI ,tt \u25a05tu25a05tSr
S: i: i ii lifeife I
Eift«ift «
HI
\u25a0u25a0
S--.S--.S
\! 8 £
I
! 8 £ iiiii1i 111 1 1 I11 1
\u25a0u25a0l K«C ?«C ? Iu25a0u25a0 §!\u25a0u25a0
?
% IIii
ii-
I!!i
=1111fcziczi
L..fe="e= "
I sari-*ari-*
X$$
I1
EE.88
8/8/2019 Description and Instructions for the Use of Position Lights Mark I and Mark II
http://slidepdf.com/reader/full/description-and-instructions-for-the-use-of-position-lights-mark-i-and-mark 7/8
ERRATA.
The position light Mart t *«, a .
*C?
POSITION LIGHT—MARKIDESCRIPTION OF POSITION LIGHT.
The light is a flare used for signaling purposes. It-burns for
about one minute, giving off a red, green, or white flame. Ithas an internal diameter of 1£ inches and a total length of 3|
inches. Itconsists of a paper or tin case, a tin outer cover, apasteboard inner cover, a flare composition, a wooden pin, a
match composition, a striking composition, and a cotton pad.The light is assembled in the following manner: The flare
composition, with the wooden-pin projection one-fourth of an
inch from its upper surface, is inserted into the case. Thematch composition is put over the projecting end of the pin.
The inner cover fits into the case and protects the match, composition. The striking compound is placed on top of the inner
cover and the cotton wad over the compound. The outer coveris slipped over the whole and fastened to the case by a piece of
tape.
The color of the light is indicated by the label and the tin
cover. The label is printed on colored paper corresponding to
the color of the flare. The tin cover is suitably shaped to
facilitate selection of the proper color in the dark. Itis smooth
for a green, corrugated for a red, and pointed for a white light*
TO TTSE THE LIGHT.
Pull the string projecting from the wrapper and remove the
flare. Remove the outer cover, the cotton wad, and the inner
cover. Strike the top of the inner cover on the match compo-
sition ; this ignites the latter which, in turn, lights the flarecomposition.
5
8/8/2019 Description and Instructions for the Use of Position Lights Mark I and Mark II
http://slidepdf.com/reader/full/description-and-instructions-for-the-use-of-position-lights-mark-i-and-mark 8/8