desconectável abb.pdf
TRANSCRIPT
40 | Kabeldon cable accessories 1-420 kV | We reserve the right to alter the design and range of our products without prior notice.
Cable connectors, premolded screened separable
CSE-A 36 kV
Conductor cross section Designation XLPE diameter Rated current Weight
mm² mm A kg/unit
50-70 CSE-A 36400-01 24.5–34 400 6.1
95-300 CSE-A 36400-02 27.5–42 400 6.6
50-70 CSE-A 36630-01 24.5–34 630 6.1
95-300 CSE-A 36630-02 27.5–42 630 6.6
400-630 CSE-A 36630-03 38.0–55 630 8.7
Use
Premolded screened separable connectors for XLPE
insulated 1- or 3-core cables with Al or Cu conductor for
36 kV. Can be installed both indoors and outdoors.
Fits standard bushings of outer cone type according to
EN 50181. Connectors with rated current:
400 A: series 400 interface type B with plug-in
Ø 14 mm.
630 A: series 400, interface type C with bolt M16.
Standards
Meets the requirements of:
CENELEC, HD 629.1 S2
Design
The connector is manufactured in rubber with three
layers; a conductive inner layer, an insulating layer and a
conductive outer layer, that are vulcanized together for
the best possible interface between the layers.
The connectors include both a capacitive test point with
protection and an integrated earthing wire.
Delivered in 3-phase kits, complete with cable lugs,
bolt connection and stress grading adapter, designed
to ensure a reliable installation.
Note:
For 3-core cables with common Cu-screen wires,
a screen separation kit must be used. See screen
separation kit.
Standard bushing EN 50181
400 series, 400 A
Contact type: Plug-in Ø14
Interface type: B
R3
Ø 4
6
Ø 7
0
Ø 1
02
115.5
Bygelfäste
40R3
R3
Ø 5
6
90
Standard bushing EN 50181
400 series, 630 A
Contact type: Bolt M16
Interface type: C
Ø 4
6
Ø 5
6
R3
R3
Ø 7
0
11 90
R3 1.5
CSE-A 36400 CSE-A 36630