department of technical education and traininge.g. :- national certificate in engineering...

33
1 MINISTRY OF SCIENCE, TECHNOLOGY, RESEARCH, SKILLS DEVELOPMENT & VOCATIONAL TRAINING AND KANDYAN HERITAGE Department of Technical Education and Training ADMISSION OF STUDENTS TO COURSES CONDUCTED AT COLLEGES OF TECHNOLOGY / TECHNICAL COLLEGES 2019 Applications are invited from eligible applicants for courses conducted in Colleges of Technology/ Technical Colleges as per Gazette Notification. Steps will be taken to enroll a sufficient number of students for each course based on the qualification and skills of the applicants. 2. The prospective candidates are advised to prepare their own applications on a A4 sheet of paper in accordance with the “Specimen Application Form” given in this notification. Duly completed applications should be sent under Registered Cover to reach the Director / Principal of the respective College of Technology / Technical College to which admission is sought to reach him on or before 03.12.2018. Applicants are advised not to submit applications to this Department or to any officer’s official or personal addresses. Also, all details in this connection are published in the website www.dtet.gov.lk and your application for courses, too can be submitted through this website. 3. Mention the name of the course applied for together with the course code on the top left hand corner of the envelope enclosing the application. E.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be rejected. 5. Candidates are required to fill in their applications carefully and correct with the Name and Code Number of the course, College for which the course to be followed and the Medium of instruction of the Course correctly. Requests made subsequently to change the College, course or Medium of instruction will not be considered under any circumstances. 6. Fees will be charged in the following manner from all those enroll in Part Time and Evening Courses. i. Part - time/ Evening courses of more than one Year Rs. 5000/= per year; ii. Part - time/ Evening courses of less than one year Rs.3000/= per course. iii. Part-time/evening short-term courses of 6 months or less than 6 months Rs. 2000/- per course. 7. Attention of all candidates is invited to the Schedule of Courses appended at the end of this notification, which indicates the nature of courses, eligibility requirements for each course, the colleges at which the courses are conducted and medium of instruction. The addresses of Colleges of Technology / Technical Colleges where the courses are conducted are shown in the list of Colleges of Technology / Technical Colleges.

Upload: others

Post on 02-Mar-2020

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

1

MINISTRY OF SCIENCE, TECHNOLOGY, RESEARCH, SKILLS DEVELOPMENT &

VOCATIONAL TRAINING AND KANDYAN HERITAGE

Department of Technical Education and Training

ADMISSION OF STUDENTS TO COURSES CONDUCTED

AT COLLEGES OF TECHNOLOGY / TECHNICAL COLLEGES – 2019

Applications are invited from eligible applicants for courses conducted in Colleges of Technology/ Technical

Colleges as per Gazette Notification. Steps will be taken to enroll a sufficient number of students for each

course based on the qualification and skills of the applicants.

2. The prospective candidates are advised to prepare their own applications on a A4 sheet of paper in

accordance with the “Specimen Application Form” given in this notification. Duly completed

applications should be sent under Registered Cover to reach the Director / Principal of the

respective College of Technology / Technical College to which admission is sought to reach him

on or before 03.12.2018. Applicants are advised not to submit applications to this Department

or to any officer’s official or personal addresses.

Also, all details in this connection are published in the website www.dtet.gov.lk and your application

for courses, too can be submitted through this website.

3. Mention the name of the course applied for together with the course code on the top left hand

corner of the envelope enclosing the application.

E.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05

4. Applications received after the prescribed date will be rejected.

5. Candidates are required to fill in their applications carefully and correct with the Name and Code

Number of the course, College for which the course to be followed and the Medium of instruction

of the Course correctly. Requests made subsequently to change the College, course or Medium of

instruction will not be considered under any circumstances.

6. Fees will be charged in the following manner from all those enroll in Part Time and Evening

Courses.

i. Part - time/ Evening courses of more than one Year Rs. 5000/= per year;

ii. Part - time/ Evening courses of less than one year Rs.3000/= per course.

iii. Part-time/evening short-term courses of 6 months or less than 6 months – Rs.

2000/- per course.

7. Attention of all candidates is invited to the Schedule of Courses appended at the end of this

notification, which indicates the nature of courses, eligibility requirements for each course, the

colleges at which the courses are conducted and medium of instruction. The addresses of Colleges

of Technology / Technical Colleges where the courses are conducted are shown in the list of

Colleges of Technology / Technical Colleges.

Page 2: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

2

8. A candidate seeking admission to follow a course in these colleges should: -

(I). be of excellent moral character;

(ii). be a citizen of Sri Lanka;

(iii). have fulfilled all the eligibility requirements for admission at the time of forwarding

the application, as per the gazette notification.

9. Qualified persons will be selected on the results of an Interview. An aptitude test will be

conducted for courses where more applications are received.

10. Any documents or copies there of, should not be submitted along with the application. Those

candidates who fail to produce the necessary and acceptable documents to prove their eligibility at

the interview will be deemed disqualified.

11. Subject to a maximum of Rs. 1,000/= a month a stipend of Rs. 50/= per day for attendance to

classes will be paid to those who follow any full time course depending on parental income.

The students who follow full time day long term courses are paid a bursary of Rs.2,500/=.

12. The candidate is held entirely responsible for the authenticity of his/her documents. Candidates

who submit documents that have been tampered with or forged or not proved in fact will be

severely dealt with.

13. Season Tickets will be provided at a concessionary rate to students of all day time courses.

14. Those who pass NVQ Level 3/4 (Day / Weekend) courses are eligible to follow NVQ Level 5

courses and those who pass NVQ Level 5 courses have access to proceed to bachelor of

Technology Degree at UNIVOTEC.

15. ‍Further information can be obtained by calling to 011-2348893.

16. To conduct all courses or several courses in this gazette notification for the academic year 2019

in Colleges of Technology / Technical Colleges are subject to discretion of the Director General

of Department of Technical Education & Training.

P.O. Box 557,

Olcott Mawatha,

Colombo 10.

www.dtet.gov.lk

P.N.K. Malalasekara

Director General,

Department of Technical Education &

Training.

Page 3: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

3

List of Colleges of Technology / Technical Colleges

Seri

al

No.

Technical College/ College of

Technology Address District

01 Sri Lanka College of Technology Olcott Mawatha, Colombo 10. Colombo

02 Galle College of Technology Kaluwella, Galle. Galle

03 Kandy College of Technology Aruppola, Kandy. Kandy

04 Jaffna College of Technology Browns Road, Jaffna. Jaffna

05 Badulla College of Technology Greenlane Drive, Badulla. Badulla

06 Anuradhapura College of

Technology New Town, Anuradhapura. Anuradhapura

07 Kurunegala College of Technology Puttalam Road, Kurunegala. Kurunegala

08 Ampara Hardy College of

Technology Inginiyagala Road, Ampara Ampara

09 Ratnapura College of Technology Palm Gardens, Colombo Road, Ratnapura. Ratnapura

10 Kegalle Technical College Kachcheri Road, Kegalle. Kegalle

11 Ratmalana Technical College Galle Road, Ratmalana. Colombo

12 Matara Technical College Meddewatta, Matara. Matara

13 Sammanthurai Technical College Ampara Road, Sammanthurai. Ampara

14 Kalutara Technical College Kalamulla, Kalutara. Kalutara

15 Warakapola Technical College Anguruwella Road, Warakapola. Kegalle

16 Kuliyapitiya Technical College Pannala Road, Kuliyapitiya. Kurunegala

17 Pathadumbara Technical College Navayalatenna, Katugastota. Kandy

18 Nuwara-Eliya Technical College Jayathilaka Mawatha, Nuwara-Eliya. Nuwara-Eliya

19 Homagama Technical College Godagama, Homagama. Colombo

20 Beliatta Technical College Puwakdandawa, Beliatta. Hambantota

21 Hasalaka Technical College Yodha Ela Road, Hasalaka. Kandy

22 Dambulla Technical College Matale Road, Dambulla. Matale

23 Balapitiya Technical College Station Road, Wandaduwa, Balapitiya. Galle

24 Wariyapola Technical College Chilaw Road, Wariyapola. Kurunegala

25 Batticaloa Technical College Manchantuduwai, Batticaloa. Batticaloa

26 Bandarawela Technical College Wewathenna, Bandarawela. Badulla

Page 4: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

4

27 Monaragala Technical College Sirigala, Monaragala. Monaragala

28 Gampaha Technical College Werellawatta, Yakkala. Gampaha

29 Trincomalee Technical College Mihindupura, Trincomalee. Trincomalee

30 Dehiattakandiya Technical College Mahawanawela, Dehiattakandiya. Ampara

31 Matale Technical College M.C. Road, Matale. Matale

32 Weerawila Technical College New Town, Weerawila. Hambantota

33 Medagama Technical College Medagama (via Bibile). Monaragala

34 Polonnaruwa Technical Co llege Vidyapura, Polonnaruwa. Polonnaruwa

35 Embilipitiya Technical College New Town, Embilipitiya. Ratnapura

36 Vavuniya Technical College Mannar Road, Vavuniya. Vavuniya

37 Akkaraipattu Technical College Main street , Akkarapattu.

Ampara

38 Anamaduwa Technical College Gamuda Bhumiya, Thammennagama,

Anamaduwa. Puttalum

39 Mannar Technical College Pannai, Wedduvan Junction,

Madu Road. Mannar

Page 5: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

5

SPECIMEN APPLICATION FORM

APPLICATION FOR ADMISSION TO COLLEGES OF TECHNOLOGY / TECHNICAL

COLLEGES - ACADEMIC YEAR - 2019

For Official use only

1. Name of the Course Course Code

(Mention three (03) courses as your preference.)

2. National Identity Card No. :-

3. Medium :-

4. Applicant’s Name with Initials (Block Letters in English) :-

5. Full Name (Block Letters in English) :-

6. Name with Initials (in Sinhala / in Tamil) :- .......................................................................................

7. Permanent Address (Block Letters in English ) :-

8. Date of Birth :-

9. Male / Female:- ……………..

10. Province:- District :-

Secretarial Division:- Gramaniladari Division :-

11. Contact Telephone No :- Home

Mobile

12. Educational Qualification :-

Sinhala Tamil English

1. .............................................................................

2. ..............................................................................

3. ..............................................................................

Age as at 01.01.2019 Years Months Days

Page 6: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

6

(A) G.C.E. (O/L) Results (Not more than two attempts)

First Attempt:- Index No: ................................................. Year : ............................ Medium : ..................................

Subject Grade

1

2

3

4

5

6

7

8

9

10

(B) G.C.E. (A/L) Results (in one attempt)

1. Index No. : ..............................................

2. Year : .............................................

3. Medium : .............................................

(C) Highest grade / year passed if the applicant has not obtained the qualifications mentioned in (A) above

Grade: .............................. Year : ...........................

13. Only for Evening and Part Time Courses

(To be Filled only for courses for which employment is a requirement)

13.1 Applicant’s Name:- ................................................................................................................. ..............

13.2 Post held present and the date of Appointment to the post :- ........................... ........................................

If self employed, the type of employment :- ..........................................................................

13.3 Work place and it’s address:- ...................................................................................................................

13.4 Employee Provident Fund No (FPE ) ...................... Employee Trust Fund (FTE )..........................

I certify that the above applicant is an employee in this Institute / Office 13.5 Name of the employee:- ...........................................................................................................................

13.6 Designation :- .………………..................................................................................................................

13.7 Signature :- .................................................................................... ............................................................

14. Applicant’s Declaration :-

I hereby certify that the information given in this application is true to my knowledge, and I have obtained the

Qualifications required for the course applied for. Further I agree with scheme of selection of students of Colleges of

Technology / Technical Colleges and to accept the decision of the Director General of the Department of Technical

Education and Training as final.

Date:- ................................. Applicant’s Signature:- ……………………………

Year Subject Grade

Second Attempt:- Index No: .......................................... Year : ............................ Medium : ...............................

Subject Grade

1

2

3

4

5

6

7

8

9

10

Page 7: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

7

SCHEDULE OF COURSES CONDUCTED IN COLLEGES OF TECHNOLOGY/

TECHNICAL COLLEGES – 2019

Agriculture Plantation & Livestock

Full Time Courses

S/No. Code

No. Name of Course Admission Qualification

Medium/ NVQ Level

and Colleges where the

courses are Available

01.

ECS40

Plant Nursery Development

Assistant

Full Time Day Six Months

1. G.C.E. (O/L) Examination in

Six (06) subjects in not more

than two sittings.

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Hasalaka, Kuliyapitiya

Sinhala Medium

NVQ Level 3

Ampara

Tamil Medium

NVQ Level 3

Sammanturai

02.

ECC34

Agriculture Equipment

Mechanic

Full Time Day One Year

1. Should have passed

Grade 10

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Dehiattakandiya

03.

ECS 39

Field Assistant (Agriculture)

Full Time Day Six Months

1. G.C.E. (O/L) Examination in

Six (06) subjects with a pass

in Medium Language in not

more than two sittings.

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Anuradhapura, Kandy,

Ratnapura, Dambulla,

Dehiattakandiya,

Embilipitiya, Hasalaka,

Kuliyapitiya, Monaragala

Sinhala Medium

NVQ Level 3

Bandarawela, Weeravila,

Tamil Medium

NVQ Level 4

Sammanturai,

Vavuniya,Akkaraipattu

Page 8: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

8

Auto Mobile Repair and Maintenance

Full Time Courses

S/No. Code

No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the

courses are Available

04

ECC18

National Certificate in

Engineering Craft Practice

(Motor Vehicle Mechanic)

Full Time Day Two Years

1. G.C.E. (O/L) Examination in

Six (06) subjects with passes

in Mathematics & Medium

Language in not more than

two sittings.

or

2. Should have obtained NVQ

3 Qualification in relevant

field.

3. Age should be between 17

and 29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Ampara, Anuradhapura,

Badulla, Galle, Kandy,

Kurunegala, Maradana,

Ratnapura, Bandarawela,

Belliatta, Dambulla,

Gampaha, Hasalaka,

Homagama, Kalutara,

Kegalle, Kuliyapitiya,

Matara, Monaragala, Nuwara

Eliya, Ratmalana,

Warakapola.

Tamil Medium

NVQ Level 4

Jaffna, Sammanthurai,

Batticaloa

Sinhala Medium

NVQ Level 3

Embilipitiya, Matale

Page 9: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

9

05

ECS 44

Certificate in Motor Cycle &

Scooter Repairing

Full Time Day Six Month

1. Should have passed Grade 09

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Kurunegala, Anamaduwa,

Dambulla, Dehiattakandiya,

Matara, Monaragala,,

Pathadumbara, Galle,

Belliatta

Sinhala Medium

NVQ Level 3

Ampara, Anuradhapura,

Maradana, Kuliyapitiya,

Embilipitiya, Nuwara Eliya,

Polonnaruwa, Weerawila,

Matale, Ratmalana.

Tamil Medium

NVQ Level 3

Akkaraipattu, Jaffna

Batticaloa, Mannar

06

ECC20

Certificate in Automobile

Painting

Full Time Day Six Month

1. Should have passed Grade 10

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Kurunegala

07

ECC17

Certificate in Automobile

(Tinkering)

Full Time Day Six Months

1. Should have passed

Grade 10

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 3

Kurunegala

08

ECS27

Automobile Electrician

Full Time Day Six Months

1. Should have passed Grade 10

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Kurunegala, Maradana,

Kalutara, Matara

Sinhala Medium

NVQ Level 3

Badulla, Bandarawela,

Embilipitiya, Hasalaka,

Homagama, Weerawila

Tamil Medium

NVQ Level 4

Trincomalee

Page 10: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

10

09

ECS28

Automobile Air Condition

Mechanic

Full Time Day Six Months

1. Should have passed

Grade 10

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Maradana, Kalutara

Sinhala Medium

NVQ Level 3

Ratnapura, Kuliyapitiya,

Ratmalana, Embilipitiya,

Homagama.

NVQ Level 3

Mannar, Sammanthurai

10

ECS30

Three Wheeler Mechanic

Full Time Day Six Months

1. Should have passed

Grade 09

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Dehiattakandiya,

Embilipitiya, Pathadumbara.

Sinhala Medium

NVQ Level 3

Badulla, Maradana,

Bandarawela, Hasalaka,

Kuliyapitiya, Wariyapola

Auto Mobile Repair and Maintenance

Part Time Courses

S/No. Code

No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the

courses are Available

11

ETC

08.1

National Certificate in

Technology (Mechanical

Engineering - Production

Technology)

Part Time Three Years

(Restricted to those employed

in the relevant field.)

1. G.C.E. (O/L) Examination in

Six (6) subjects in not more

than two sittings.

Six (06) subjects should be:-

(a). Sinhala/Tamil/English

Language

(b). Mathematics and Science

(c). Three other subjects

or

2. Should have obtained NVQ 3

/4 Qualification for relevant

field

3. Age should not be less than 17

years as on 01.01.2018

English Medium

NVQ Level 5

Maradana

Sinhala Medium

NVQ Level 5

Maradana

Page 11: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

11

12

ETC 09.1

National Certificate in

Technology (Mechanical

Engineering – Auto Mobile

Technology)

Part Time Three Years

(Restricted to those employed

in the relevant field.)

1. G.C.E. (O/L) Examination in

Six (6) subjects in not more

than two sittings.

Six (06) subjects should be:-

(a). Sinhala/Tamil/English

Language

(b). Mathematics and Science

(c). Three other subjects

or

2. Should have obtained NVQ 3

/4 Qualification for relevant

field

3. Age should not be less than 17

years as on 01.01.2019

English Medium

NVQ Level 5

Maradana

Sinhala Medium

NVQ Level 5

Matara, Maradana,

Kurunegala

Tamil Medium

NVQ Level 5

Sammanthurai

Leather and Foot Wear

Full Time Courses

S/No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the courses

are Available

13 MCC08

Certificate in Foot Wear

Making

Full Time Day Six Months

1. Should have passed Grade 09

2. Age should be between 17 and

29 years as on 01.01.2019.

Sinhala Medium

NVQ Level 3

Medagama, Embilipitiya

Building and Construction

Full Time Courses

S/No. Code

No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the

courses are Available

14 ETC 01 National Certificate for

Industrial Technicians (Civil

Engineering)

Full Time Day - 2 Years

Should have followed a NVQ level 3/4 Course in relevant field, conducted at any of the government approved training institute.

or

Passed minimum in 3 subjects

at G.C.E.(A/L) in Engineering

Technology/ Mathematics /

Science.

English Medium

NVQ Level 5

Kandy, Ratmalana,

Kuliyapitiya.

Page 12: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

12

15

ETC05

National Certificate in

Engineering Draughtsman

ship

Full Time Day One Year

1. G.C.E. (O/L) Examination in

Six (6) subjects with four (04)

credits including Mathematics/

Science and medium language

in not more than two

sittings.

(Preference will be given to

those followed G.C.E. (A/L)

in Mathematics Stream

/Engineering Technology

Stream)

2. Age should be between 17

and 29 years as on

01.01.2019

Sinhala Medium

NVQ Level 4

Ampara, Anamaduwa,

Pathadumbara ,

Anuradhapura, Badulla,

Bandarawela, Beliatta,

Dambulla, Weerawila,

Balapitiya, Embilipitiya,

Galle, Gampaha, Homagama,

Kalutara, Kandy, Kegalle,

Kuliyapitiya,

Kurunegala,Maradana,

Matale, Matara, Moneragala,

Polonnaruwa

Ratmalana,Ratnapura ,

Warakapola, wariyapola,

Nuwara Eliya, Hasalaka

Tamil Medium

NVQ Level 4

Maradana,Batticaloa,

Trincomalee, Jaffna,

Vavuniya, Sammanthurai,

Akkaraipattu , Mannar

16

ECC40

Certificate in Landscaping for

Junior Supervisors

Full Time Day Six month

1. Should have passed G.C.E. (O/L)

Examination in Six (6) subjects

2. Age should be between 17 and

29 years as on 01.01.2019.

Sinhala Medium

NVQ Level 4

Warakapola, Badulla

Sinhala Medium

NVQ Level 3

Kuliyapitiya

Page 13: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

13

17

ECS31

National Certificate in

Engineering Craft Practice

(Plumber)

Full Time Day Six Months

1. Should have studied up to

Grade 10

2. Age should be between 17 and

29 years as on 01.01.2019.

Sinhala Medium

NVQ Level 4

Nuwara Eliya, Ratnapura,

Dambulla, Bandarawela,

Kegalle, Moneragala,

Beliatta, Kalutara, Galle

Tamil Medium

NVQ Level 4

Batticaloa, Sammanthurai

Sinhala Medium

NVQ Level 3

Ampara, Matara, Homagama,

Kurunegala, Badulla

Tamil Medium

NVQ Level 3

Jaffna, Vavuniya,

Trincomalee

18

ECC14

National Certificate in

Engineering Craft Practice

(Construction Craftsman)

Full Time Day One Year

1. Should have studied up to

Grade 10

2. Age should be between 17 and

29 years as on 01.01.2019.

Sinhala Medium

NVQ Level 4

Bandarawela

Tamil Medium

NVQ Level 4

Sammanthurai

19

ECS21

Certificate in Aluminum

Fabrication

Full Time Day Six Months

1. Should have passed Grade 09

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Homagama, Kandy,

Kurunegala, Nuwara Eliya

Tamil Medium

NVQ Level 4

Akkaraipattu

Sinhala Medium

NVQ Level 3

Kaluthara, Matara,

Warakapola, Kegalle,

Rathmalana, Balapitiya

Tamil Medium

NVQ Level 3

Mannar

Page 14: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

14

20

ECS22

Quantity Surveying Assistant

Full Time Day Six Months

1. G.C.E. (O/L) Examination

in Six (06) subjects with

passes in Mathematics,

Science & Medium

Language - in not more than

two sittings.

or

2. Should have obtained NVQ 3

Qualification for relevant

field.

3. Age should be between 17

and 29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Gampaha, Matara,

Ratnapura, Matale,

Wariyapola, Badulla,

Anamaduwa, Kalutara,

warakapola. Balapitiya,

Bandarawela, Kurunegala,

Embilipitiya, kuliyapitiya,

Beliatta, Kandy, Monaragala,

Dehiattakandiya, Homagama,

Maradana, Kegalle, Galle,

Ratmalana, Weerawilla,

Anuradhapura, Ampara

Tamil Medium

NVQ Level 4

Akkaraipattu, Batticaloa,

Jaffna, Mannar, Vavuniya,

Sammanturai

21

ECS32

Building Craftsman

Full Time Day Six month

1 Should have passed Grade 9

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 3

Dehiattakandiya

Tamil Medium

NVQ Level 3

Sammanthurai

22

ECC47

Multi Skilled Craftsman

(Construction)

Full Time –Day One Year

(Woodwork, plumbing,

Masonry and Electrical fields

will be covered by this course)

1. Should have passed Grade 10

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Balapitiya, Kandy,

Kurunegala, Galle,

Bandarawela, Anurdhapura

Belliatta, Maradana

Sinhala Medium

NVQ Level 3

Polonnaruwa

Tamil Medium

NVQ Level 4

Trincomalee, Batticaloa,

Sammanthurai

Page 15: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

15

23

ECC 01

Construction Site Supervisor

Full Time Day One Year

1. G.C.E. (O/L) Examination in

Six (6) Subjects with passes in

Mathematics, Science and

Medium Language in not more

than two sittings.

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Anuradhapura, Badulla,

Galle, Kandy, Kurunegala,

Maradana, Rathnapura,

Anamaduwa, Balapitiya,

Bandarawela, Beliatta,

Dambulla, Dehiattakandiya,

Embilipitiya, Gampaha,

Hasalaka, Homagama,

Kaluthara, Kegalle,

Kuliyapitiya, Matara,

Medagama, Monaragala,

Polonnaruwa, Rathmalana, ,

Warakapola, Wariyapola,

Weerwila

Tamil Medium

NVQ Level 4

Batticaloa, Vavuniya,

Mannar, Akkaraipattu,

Jaffna, Sammanthurai

Trincomalee,

Page 16: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

16

Building and Construction Part Time Courses

S/No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the

courses are Available

24

ETC01.1

National Certificate in

Technology (Civil

Engineering)

Part Time Three years

(Restricted to those employed

in the relevant field.)

1. G.C.E. (O/L) Examination in

Six (6) subjects in not more

than two sittings.

Six (6) subjects should be:-

(a) Sinhala/Tamil/English

Language

(b) Mathematics and Science

(c) Three other subjects

or

2. Should have obtained NVQ 3

/4 Qualification for relevant

field.

3. Age should not be less than

17 years as on 01.01.2019.

English Medium

NVQ Level 05

Ampara, Anuradapura,

Badulla, Galle, ,Kandy,

Kurunegala, Maradana,

Rathnapura, Jaffna.

Sinhala Medium

NVQ Level 05

Ampara, Anuradapura,

Badulla, Galle, ,Kandy,

Kurunegala, Maradana,

Rathnapura, Balapitiya,

Bandarawela, Dambulla,

Embilipitiya, Gampaha,

Hasalaka, Homagama,

Kaluthara, Kuliyapitiya,

Matale, Pathadumbara,

Rathmalana, Warakapola,

Weerawilla, Belliatta,

Kegalle,Wariyapola.

Tamil Medium

NVQ Level 5

Baticaloa, Trincomalee,

Jaffna, Vavuniya,

Samanthurai, Akkaraipattu,

Mannar

Page 17: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

17

25

ETC04.1

National Certificate in

Technology (Quantity

Surveying)

Part Time Three Years

(Restricted to those employed

in the relevant field.)

1. G.C.E. (O/L) Examination in

Six (6) subjects in not more

than two sittings.

Six (06) subjects should be: -

(a) Sinhala/Tamil/English

Language

(b) Mathematics and Science

(c) Three other subjects

Or

2. Should have obtained NVQ 3

/4 Qualification for relevant

field.

3. Age should not be less than 17

years as on 01.01.2019.

English Medium

NVQ Level 05

Ampara, Anuradapura,

Badulla, Galle, Kandy,

Kurunegala, Maradana,

Rathnapura, Jaffna.

Sinhala Medium

NVQ Level 5

Anuradhapura, Badulla,

Galle, Kandy, Kurunegala,

Maradana, Rathnapura,

Beliatta, Gampaha,

Homagama, Kaluthara,

Matara, Kegalle

Tamil Medium

NVQ Level 5

Jaffna, Batticaloa,

Sammanthurai,

Page 18: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

18

Information Communication & Multimedia Technology Full Time Courses

S/No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the courses

are Available

26

ECC 03

Certificate in Computer

Hardware

Full Time Day Six Months

1. G.C.E. (O/L) Examination

in Six (6) Subjects with

passes in Mathematics,

Science and Medium

Language in not more than

two sittings.

or

Should have completed basic

Computer Science Course

2. Age should be between 17

and 29 years as on

01.01.2019

Sinhala Medium

NVQ Level 4

Kuliyapitiya, Kalutara,

Kurunagala, Matara, Kegalle,

Embilipitiya, Warakapola,

Galle.

Tamil Medium

NVQ Level 4

Batticaloa, Jaffna

Tamil Medium

NVQ Level 3

Trincomalee

27 ECC 04 Certificate in Computer

Networking

Full Time Day Six Months

1. G.C.E. (O/L) Examination

in Six (6) Subjects with

passes in Mathematics,

Science Medium Language

and English Language in not

more than two sittings.

or

Should have completed

basic Computer Science

Course

2. Age should be between

17 and 29 years as on

01.01.2019

Sinhala Medium

NVQ Level 4

Bandarawela, Mathara,

Galle

Tamil Medium

NVQ Level 4

Jaffna, Vavuniya,

Sammanturai

28

ECC 31

Certificate in Computer

Graphic Designing

Full Time Day Six Months

01. G.C.E. (O/L) Examination in

Six (6) Subjects with passes

in Mathematics, Science and

Medium Language in not

more than two sittings.

or

Should have completed

basic Computer Science

Course

2. Age should be between 17

and 29 years as on

01.01.2018

Sinhala Medium

NVQ Level 4

Anamaduwa, Kalutara,

Wariyapola, Badulla

Tamil Medium

NVQ Level 4

Akkaraipattu, Mannar

Page 19: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

19

29

ECC 12

Information Communication

Technology Technician

Full Time Day Six Months

1. G.C.E. (O/L) Examination in

Six (6) Subjects with passes

in Mathematics, Medium

Language and English

Language in not more than

two sittings.

2. Age should be between 17

and 29 years as on

01.01.2019

Sinhala Medium

NVQ Level4

Warakapola, Matara,

Gampaha, Rathnapura,

Kegalle, Bandarawela,

Nuwara Eliya,

Pathadumbara, Matale,

Anamaduwa, Beliatta,

Kalutara, Kuliyapitiya,

Embilipitiya, Balapitiya,

Weerawila, Wariyapola,

Hasalaka, Dehiattakandiya,

Polonanaruwa, Homagama,

Anuradhapura, Dambulla,

Monaragala, Medagama,

Ampara, Galle, Kandy,

Kurunegala

Tamil Medium

NVQ Level 4

Jaffna, Batticaloa, Mannar,

Akkaraipattu, Trincomalee,

Vavuniya, Sammanthurai

30

ECC53

Associate Software Developer

Full Time Day Nine Months

1. G.C.E. (O/L) Examination

in Six (6) subjects with

credits including

Mathematics / English

language or ICT in not more

than two sittings.

2. Age should be between 17

and 29 years as on 01.01.2019

Sinhala Medium

NVQ Level 04

Maradana, Homagama,

Kaluthara, Pathadumbara,

Rathmalana, Kurunegala

31

ECC54

IT Support

Full Time Day Six Months

1. G.C.E. (O/L) Examination in

Six (6) Subjects with passes in

Mathematics, Science,

Medium Language and

English Language

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 04

Maradana, Kaluthara, Galle,

Kurunegala

Page 20: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

20

32

ECC55

Associate Creative Designer

Full Time Day Nine Months

01. G.C.E. (O/L)

Examination in Six (6)

Subjects with passes in

Mathematics, Science and

Medium Language in not more

than two sittings.

or

Should have completed basic

Computer Science Course

2. Age should be between 17 and

29 years as on 01.01.2018

Sinhala Medium

NVQ Level 04

Kalutara, Matara,

Polonnaruwa

Information Communication & Multimedia Technology

Part Time Courses

S/ No. Code

No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the

courses are Available

33 ECC12.1 Information Communication

Technology Technician

Part Time One Year

(Priority will be given to those

who are employed in the

relevant field.)

1. G.C.E. (O/L) Examination in

Six (6) Subjects with passes

in Mathematics, Medium

Language and English

Language in not more than

two sittings.

2. Age should not be less than

17 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Galle, Rathnapura,

Kaluthara, Matara, Ampara,

Maradana, Kegalle, Badulla,

Dehiattakandiya,

Monaragala, Pathadumbara,

Embilipitiya, Madagama,

Weerawila.

Tamil Medium

NVQ Level 4

Sammanthurai, Jaffna,

Mannar, Akkaraipaththu ,

Batticaloa

34

ECC31.1

Certificate in Computer

Graphic Designing

Part Time One Year

01. G.C.E. (O/L) Examination in

Six (6) Subjects with passes

in Mathematics, Science and

Medium Language in not

more than two sittings.

or

Should have completed

basic Computer Science

Course

2. Age should not be less than

17 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Kurunegala

Page 21: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

21

Gem and Jewellery

Full Time Courses

S/No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the courses

are Available

35

ETC07

National Certificate in

Jewellery Manufacture

Full Time Day One Year

1. Passes in Four (04) subjects at

G.C.E. (O/L) Examination in

one sitting

Or

Should have passed year 09 and

experience in the relevant field.

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Maradana, Belliatta

Electrical Electronic and Telecommunication

Full Time Courses

S/No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the courses

are Available

36

ETC 02

National Certificate for

Industrial Technicians

(Electrical Engineering)

Full Time Day 2 Years

Should have followed a NVQ level 3/4 Course in relevant field, conducted at any of the government approved training institute.

or

Passed minimum in 3 subjects at G.C.E.(A/L) in Engineering Technology/ Mathematics / Science.

English Medium

NVQ Level 5

Kandy, Ratmalana

Page 22: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

22

37

ECC08

National Certificate in

Engineering Craft Practice

(Electronics)

Full Time Day

Two Years

1. G.C.E. (O/L) Examination in

Six (06) subjects with passes

in Mathematics & Medium

Language in not more than

two sittings.

or

2. Should have obtained NVQ 3

Qualification for relevant

field.

3. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Rathmalana, Kegalle,

Ampara, Wakapola,

Rathnapura, Maradana,

Mathara, Kaluthara,

Kurunegala, Galle, Beliatta. Badulla.

Tamil Medium

NVQ Level 4

Jaffna , Maradana

Sinhala Medium

NVQ Level 3

Bandarawela

38

ECC13

National Certificate in

Engineering Craft Practice –

(Industrial Electrician)

Full Time Day Two Years

1. G.C.E. (O/L) Examination in

Six (06) subjects with passes

in Mathematics & Medium

Language in not more than

two sittings.

or

2. Should have obtained NVQ 3

Qualification for relevant

field.

3. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Ampara, Kandy, Galle,

Anuradhapura, Maradana,

Badulla, Balapitiya, Matara,

Pathadumbara, Kuliyapitiya,

Warakapola,Embilipitiya,

Kalutara, Kegalle,

Moneragala, Matale,

Gampaha, Rathmalana,

Nuwara – Eliya, Beliatta,

Bandarawela, Dambulla,

Homagama

Tamil Medium

NVQ Level 4

Jaffna, Sammanthrai,

39

ECC22

Certificate in Electrical Trade

Full Time Day One Year

1. G.C.E. (O/L) Examination in

Six (06) Subjects in not more

than Two sittings.

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Rathnapura,

Sinhala Medium

NVQ Level 3

Kaluthara, Anamaduwa,

Wariyapola.

Tamil Medium

NVQ Level 4

Batticaloa, Sammanthurai,

Tamil Medium

NVQ Level 3

Jaffna

Page 23: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

23

40

ECC52

Electrician (Domestic)

Full Time Day Six Months

1. Should have studied up to

G.C.E. O/L Examination

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 3

Bandarawela,

Dehiattakndiya, Anamaduwa,

Embilipitiya, Wariyapola,

Tamil Medium

NVQ Level 3

Vavuniya, Maradana,

Trincomalee

.

41

ECC21 Certificate in House Hold

Electrical Appliances

Repairing

Full Time Day Six Months

1. Should have passed

grade 10

2. Age should be between

17 and 29 years as on

01.01.2019

Sinhala Medium

NVQ Level 4

Pathadumbara, Anamaduwa.

Sinhala Medium

NVQ Level 3

Nuwara Eliya,

Dehiattakandiya, Hasalaka.

Tamil Medium

NVQ Level 4

Trincomalee

42

ECC43

Industrial Electronic

Craftsman

Full Time Day One Year

1. Should have studied up to

G.C.E. O/L Examination

2. Age should be between 17

and 29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Kurunegala

Sinhala Medium

NVQ Level 3

Rathmalana

43

ECC 56

Electronic Appliances

Technician

Full Time Day One Year

1. Should have passed grade 10

2. Age should be between 17

and 29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Gampaha

Page 24: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

24

44

ECS54

Mobile Phone Repairing

Technician

Full Time Day

Three Months

1. Should have passed grade 9

2. Age should not be less than

17 years as on 01.01.2019

Sinhala Medium

NVQ Level 3

Kurunegala

Tamil Medium

NVQ Level 3

Sammanthurai

45 ECC57 Telecommunication

Technician

Full Time Day

1 ½ Years.

(Six months institutional and

one year industrial training.)

1. G.C.E. (O/L) Examination in

Six (06) Subjects in not more

than Two sittings.

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Galle

Electrical Electronic and Telecommunication

Part Time Courses

S/No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the

courses are Available

46

ETC 02.1

National Certificate in

Technology (Electrical

Engineering)

Part Time Three Years

(Restricted to those employed

in the relevant field.)

1. G.C.E. (O/L) Examination in

Six (6) subjects in not more

than two sittings.

Six (06) subjects should be:-

(a) Sinhala/Tamil/English

Language

(b) Mathematics and Science

(c) Three other subjects

or

2. Should have obtained

NVQ 3 /4 Qualification for

relevant field

3. Age should not be less than 17

years as on 01.01.2019

English Medium

NVQ Level 05

Anuradapura, Badulla,

Galle, ,Kandy, Kurunegala,

Maradana, Rathnapura,

Jaffna.

Sinhala Medium

NVQ Level 5

Anuradhapura, Badulla ,

Galle, Kandy, Maradana,

Kurunegala, Ampara,

Ratnapura, Homagama,

Matara, Ratmalana,

Pathadumbara, Gampaha,

Bandarawela, Kegalle.

Tamil Medium

NVQ Level 5

Jaffna, Batticaloa,

Sammanthurai.

Page 25: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

25

Finance Banking and Management

Full Time Courses

S/No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the

courses are Available

47

BSC 04 National Certificate for

Accounting Technicians

Full Time Day One Year

1. G.C.E. (O/L) Examination in

Six (6) Subjects with passes

in Mathematics and

Medium Language in two

sittings.

2. Age should be between 17

and 29 years as on

01.01.2019

Sinhala Medium

NVQ Level 4

Matale, Homagama, Beliatta,

Kegalle, Maradana, ,

Anuradhapura, Balapitiya,

Galle, Gampaha, Hasalaka,

Kalutara, Kandy,

Kuliyapitiya,

Kurunegala,Matara, Nuwara-

Eliya, Polonnaruwa,

Ratnapura, Badulla,

Embilipitiya, Ratmalana,

Wariyapola, Ampara,

Warakapola, Monaragala,

Dambulla.

Tamil Medium

NVQ Level 4

Jaffna,Batticaloa,

Sammanthurai, Trincomalee,

Vavuniya, Akkaraipattu,

Mannar, Maradana,

48

BSC05

National Certificate in

Marketing

Full Time Day One Year

1. G.C.E. (O/L) Examination in

Six (6) subjects in not more

than two sittings with passes

in Mathematics, Medium

Language and English

Language.

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Anuradhapura

Page 26: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

26

Languages

Full Time Courses

S/No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the courses

are Available

49

ESC02

National Certificate in

Professional English

Full Time Day One Year

1. G.C.E. (O/L) Examination in

Six (6) subjects with a pass

in English

2. Age should be between 17

and 29 years as on

01.01.2019

English Medium

Ampara, Anamaduwa,

Anuradhapura, Badulla,

Balapitiya, Bandarawela,

Batticaloa, Beliatta,

Dambulla, Dehiattakandiya,

Embilipitiya, Galle,

Gampaha, Homagama,

Warakapola, Wariyapola,

Weeravila, Vavuniya,

Trincomalee, Pathadumbara,

Nuwara Eliya, Monaragala,

Matara, Mannar,

Akkaraipattu, Rathnapura,

Matale, Polonnaruva,

Kaluthara, Hasalaka,

Ratmalana, Kandy, Kegalle,

Kuliyapitiya, Jaffna,

Medagama, Kurunegala,

Maradana, Sammanthurai

50

MCC 09

National Certificate in

Japanese Language

Full Time Day One Year

1. G.C.E. (O/L) Examination in

Six (6) subjects in not more

than two sittings.

2. Age should be between 17

and 29 years as on

01.01.2019

Japanese Medium

Galle, Beliatta,

51

MCC 07

National Certificate in

Korean Language

Full Time Day One Year

1. G.C.E. (O/L) Examination in

Six (6) subjects in not more

than two sittings.

2. Age should be between 17 and

29 years as on 01.01.2019

Korean Medium

Galle, Matara, Badulla,

Beliatta, Anuradapura ,

Maradana, Kurunegala ,

Bandarawela, Kegalle,

Page 27: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

27

Metal and Light Engineering

Full Time Courses

Serial

No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level

and Colleges where the

courses are Available

52

ECC10

National Certificate in

Engineering Craft Practice –

(Fitter Machinist)

Full Time Day Two Years

1. G.C.E. (O/L) Examination in

Six (06) subjects with passes

in Mathematics & Medium

Language in not more than

two sittings.

or

2. Should have obtained NVQ 3

Qualification for relevant

field.

3. . Age should be between 17

and 29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Badulla, Kurunegala,

Kuliyapitiya

53

ECC02

National Certificate in

Engineering Craft Practice –

(Gas & Arc Welder)

Full Time Day One Year

1. Should have studied up to

Grade 10.

.

2. Age should be between 17 and

29 years as on 01.01.2019.

Sinhala Medium

NVQ Level 4

Kandy , Ampara,Galle,

Maradana, Anuradhapura

Badulla, Ratnapura,

Kaluthara, Kuliyapitiya,

Wariyapola, Balapitiya,

Kegalle, Gampaha,

Hasalaka, Embilipitiya,

Kurunegala,

Dehiattakandiya, Matara,

Ratmalana, Moneragala,

Dambulla, Beliatta.

Sinhala Medium

NVQ Level 3

Weerawila, Warakapola,

Bandarawela, Homagama

Tamil Medium

NVQ Level 3

Jaffna, Trincomalee,

Page 28: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

28

54

ECC26

Certificate in Machining

Full Time Day One Year

1. Should have passed Grade 10

2. Age should be between 17 and

29 years as on 01.01.2019.

Sinhala Medium

NVQ Level 4

Gampaha, , Galle, Nuwara-

Eliya, Maradana, ,

Warakapola, Kurunegala,

Kandy, Dambulla, Rathmalana

Sinhala Medium

NVQ Level 3

Banadawela, Homagama,

Polonnaruwa, kalutara,

Dehiattakandiya,

Rathnapura, Embilipitiya,.

Tamil Medium

NVQ Level 4

Jaffna

Wood Related

Full Time Courses

S/ No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the courses

are Available

55

ECC06

National Certificate in

Engineering Craft Practice –

(Wood Machinist)

Full Time Day One Year

1. Should have studied up to

Grade 10

2. Age should be between 17 and

29 years as on 01.01.2019.

Sinhala Medium

NVQ Level 4

Badulla, Bandarawela,

Dehiattakandiya, ,

Monaragala,

Sinhala Medium

NVQ Level 3

Rathnapura, Homagama.

56

ECS46

Wood Craftsman (Building)

Full Time Day Three months

1. Should have passed Grade 09

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 3

Kurunegala

Page 29: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

29

57

ECC48

Wood Craftsman (Furniture)

Full Time Day Six months

1. Should have passed Grade 09

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 3

Kuliyapitiya, Nuwara Eliya

Hotel Industry

Full Time Courses

S/ No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the courses

are Available

58

MCS22

Food and Beverage Services

(Assistant Steward)

Full Time Day Three Months

1. Should have passed

Grade 10

2. Age should not be less than

17 years as on 01.01.2019.

Sinhala Medium

NVQ Level 3

Kuliyapitiya

59

MCS20

Cookery

Full Time Day Six Months

1. Should have passed Grade 9

2. Age should not be less than

17 years as on 01.01.2019.

Sinhala Medium

NVQ Level 4

Kuliyapitiya, Wariyapola

60

MCS27

Assistant Cook

Full Time Day Three Months

1. Should have passed Grade 9

2. Age should not be less than

17 years as on 01.01.2019

Sinhala Medium

NVQ Level 3

Kuliyapitiya

Page 30: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

30

Office Management Full Time Courses

Serial

No.

Code No. Name of Course Admission Qualification Medium/ NVQ Level and

Colleges where the courses

are Available

61

BSC06

National Certificate in

Secretarial Practice

Full Time Day One Year

1. G.C.E. (O/L) Examination in

Six (6) subjects with passes in

Mathematics and Medium

Language in not more than

two sittings. Should have a

Credit pass in English.

(1) Competency in spoken &

written English will be

considered.

(11) Candidates will have to

sit a written test if so

decided by the

authorities.

(111) Female candidates are

preferred.

1. Age should be between

17 and 29 years as on

01.01.2019

English Medium

NVQ Level 4

Badulla, Kandy,

Kuliyapitiya, Kurunegala,

Maradana, Matale,

Homagama, Gampaha, Galle,

Kegalle, Jaffna, Batticaloa,

Kalutara,

62 BSC 20 National Certificate in

Shorthand, Typewriting and

Computing .

Full Time Day One Year

NVQ 3 Certificate will be

awarded for this course in

Computer Application

Assistant Trade.

1. G.C.E. (O/L) Examination in

Six (6) subjects with passes in

Mathematics and Medium

Language in not more than two

sittings.

Should have a Credit pass in

Medium Language

2. Age should be between 17 and

29 years as on 01.01.2019.

Sinhala Medium

NVQ Level 3

Ampara, Beliatta, Dambulla,

Dehiattakandiya, Kandy,

Kuliyapitiya, Moneragala,

Pathadumbara, Kegalle,

Bandarawela, Warakapola,

Maradana, Kaluthara, Galle

Tamil Medium

NVQ Level 3

Mannar, Batticaloa,

Akkaraipattu, Trincomalee

Vavuniya, Jaffna,

Sammanthurai, Maradana.

Page 31: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

31

Refrigeration & Air Conditioning

Full Time Courses

S/ No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the courses

are Available

63

ECC05

National Certificate in

Engineering Craft Practice –

(Refrigeration & Air

Conditioning Mechanic)

Full Time Day One Year

1. G.C.E. (O/L) Examination in

Six (06) subjects with passes

in Mathematics, Science &

Medium Language in not more

than two sittings.

or

2. Should have obtained NVQ 3

Qualification for relevant

field.

3. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 4

Kandy, Kurunegala,

Ratnapura, Kegalle,

Gampaha, Balapitiya,

Anuradhapura, Kalutara,

Maradana, Ratmalana, ,

Matara, Homagama, Badulla,

Galle, Belliatta

Sinhala Medium

NVQ Level 3

Embilipitiya, Bandarawela

Tamil Medium

NVQ Level 4

Batticaloa,Sammanthurai ,

Tamil Medium

NVQ Level 3

Trincomalee

64

ECS 50

Refrigeration & Air

Conditioning Mechanic

Full Time Day Six Months

1. G.C.E. (O/L) Examination in

Six (6) subjects in not more

than two sittings.

2. Age should be between 17 and

29 years as on 01.01.2019

Sinhala Medium

NVQ Level 3

Matale

Tamil Medium

NVQ Level 3

Mannar, Vavuniya

Page 32: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

32

Textile & Garment

Full Time Courses

S/ No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the courses

are Available

65

MCS 10

Certificate in Tailoring.

(Ladies & Gents)

Full Time Day Six Months

1. Should have passed Grade 9

2. Age should be between 17

and 29 years as on

01.01.2019

Sinhala Medium

NVQ Level 3

Warakapola, Kuliyapitiya,

Weerawila, Dehiattakandiya

Food Technology

Full Time Courses

Serial

No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the

courses are Available

66

ECC16

Certificate in Fruits &

Vegetable Processor

Full Time Day Six Months

1. G.C.E. (O/L) Examination in

Six (06) subjects with passes

in Mathematics, Science,

Medium Language &

English in not more than two

sittings.

2.Age should be between 17

and 29 years as on

01.01.2019

Sinhala Medium

NVQ Level 3

Kandy, Kuliyapitiya

Page 33: Department of Technical Education and TrainingE.g. :- National Certificate in Engineering Draughtsman Ship Course - ETC05 4. Applications received after the prescribed date will be

33

Health

Full Time Courses

Serial

No. Code No. Name of Course Admission Qualification

Medium/ NVQ Level and

Colleges where the

courses are Available

67

MCS29

Nurse Assistant

Full Time Day Three Months

1. G.C.E. (O/L) Examination

in Six (06) subjects with

passes in Mathematics,

Science, Medium Language

& English in not more than

two sittings.

2.Age should be between 17

and 29 years as on

01.01.2019

Sinhala Medium

NVQ Level 3

Badulla, Kurunegala, Ampara,

Rathnapura, Kegalle, Beliatta,

Kandy, Dehiattakandiya,

Matale, Embilipitiya,

Anuradhapura, Balapitiya,

Dambulla.

Tamil Medium

NVQ Level 3

Vavuniya , Akkaraipattu,

Sammanthurai, Mannar,

Trincomalee

68

MCS26

Care Giver

Full Time Day Three Months

1. G.C.E. (O/L) Examination

in Six (06) Subjects in not

more than Two sittings.

2. Age should be between 17

and 29 years as on

01.01.2019

Sinhala Medium

NVQ Level 3

Badulla, Ampara, Beliatta,

Embilipitiya, Anuradhapura,

Kandy, Dambulla

Tamil Medium

NVQ Level 3

Trincomalee, Mannar