department of electrical engineering etap - skill
TRANSCRIPT
DEPARTMENT OF ELECTRICAL ENGINEERING
ETAP - Skill Development 1 Days
WorkshopON
9th FEB, 2019 At
OM ENGINEERING COLLEGE, JUNAGADH
CoordinatorMr. N.D.JOSHI
H.O.D.Mr.N.D.JOSHI
1
ACKNOWLEDGEMENT
We show gratitude towards our Director / Principal Dr.N.M.Sureja who encourage us to arrange this type of skilldevelopment workshop for Degree Students carrier development.
We are special thankful to all staff members for spendvaluable time in Skill Development workshop & also share WhatKnowledge and Skills required in field.
1
IntroductionDepartment of electrical engineering from OM
Engineering College arranged One Day (Three sessions)
Skill Development Program on Electrical Transient
Analyzer Program (ETAP) dated 9th February * 2019.
Mr. N.D.JOSHI working as Asst. Professor in Electrical
Engineering Department of OM Engineering College
rendered his expertise to all workshop participants on
ETAP. Approximately 40 students from 4th Semester
degree side were attending the workshop.
Seminar was started at 10:00 am with inauguration
in which introductory speech given by Prof. N.D.Joshi
who has inspire the students for doing the skill
development activities those can be useful in future
industrial requirement..,
After this session, the all the students were sent
to the respective skill development workshop places &
Electrical Degree students’ session was hand over to Prof.
N.D.Joshi (Electrical Software expert, having more than 5
years of experience in ETAP programming in industry).
Importance Of ETAP Software
Now a days , It is everywhere & most part of this
automation is based on the ETAP.
ETAP is the most comprehensive analysis platform
for the design, simulation, operation, and automation of
generation, distribution, and industrial power systems.
ETAP is developed under an established quality
assurance program and is used worldwide as a high
impact software. ETAP is completely localized in four
languages with translated output reports in six
languages.
ETAP is a powerful, user friendly and easy to use
tool with trusted output data and calculations. We are
very satisfied with ETAP’s performance.
Introduction of key electrical equipment
The load modeling and forecasting based on
knowledge of several factor like Customer
factor: type of consumption, electrical heating,
size of building, electrical appliances etc….
Time of factors: time of day, day of week (+
special days) & time of year.
Climate factors: temperature, humidity, solar
radiation etc..Other load correlated to the
target load
Pervious load value and load curve patterns.
ETAP MODE TOOLBAR
Mode toolbar is located on top of GUI just below
the file menu. Different Analysis Modes can be
selected from this Mode Toolbar according to the
requirement of the project. In ETAP 16, a
complete set of analyses has been provided
through the mode toolbar as given in the list
below:
• Load Flow: Used to perform load flow (or power flow) on power system modeled in one line diagram.
• Unbalanced Load Flow• ANSI Short Circuit Analysis• Motor Starting Analysis• Harmonic Analysis• Transient Analysis• Star Protection Coordination• Optimal Load Flow
• Reliability Analysis• Optimal Capacitor Placement• DC Load Flow• DC Short Circuit Analysis• Battery Sizing Analysis
The Topics discussed during Workshop
This session was conducted by Prof. N.D. Joshi he shares his idea
about the future after Electrical engineering in the Field of
the Software of electrical design. He also gives the idea
about the industry which are using the ETAP in different
sectors.
(1) Design of Protection Coordination of a Distribution Network in ETAP.
(2) Radial network
(3) Protection
(4) Fuses
(5) Circuit breakers
(6) Reclosers
(7) Coordination
(8) Modeling and Load Flow Analysis of a Small PowerSystem in ETAP
(9) Importance of Load Flow Studies
(10) Transmission Line Design
After this student learned on which base the programming of ETAP
is done, it’s only on the base of the Electrical Design of substation
& transmission network.
This was the last session of the student were learnt about the
software which is used for the programming of ETAP & also how to
use the software how to select the model of the transmission ine
for which we are making the program.
CONCLUSION ETAP Software is the most trusted software
for the design of Electrical Transmission line and design ofElectrical Power generation. After successfully completedseminar student aware about the introduction of the software &its benefit of Electrical Engineering course.
More than 40 Students from OMengineering colleges has successfully attended this workshop andgot the benefit of practical based approach of the etapprogramming which will be very much useful for the studentswhen they got the job in transmission & generation basedcompanies.