denim fashion la moda dril lave twal mencuci vintage coated resin fabric
DESCRIPTION
How can you create fashinable denim. How can you catch fashinable looks on denimTRANSCRIPT
DENIM CONTENTS
Products for Denim GarmentsFinish (Laundry)
! Resin Finishing ! Fastness Improvement ! Washing Agent ! Dispersing and We?ng Agent ! EnzymaBc Desizing ! Bleaching Enzyme ! Stonewash Enzyme ! BiopolishEnzyme ! SoGener& Silicone ! Special Effects
Pruducts For Resin Finishing
Resinblue : Low Formaldehyde ReacBve Resin With Catalyst
Resinblue NOTEAR : SoG PU & Acrylate Resinblue STIFF : Hard Acrylate Resinblue WAVY : Wrinkle Resistant Agents Fixblue I : Formaldehyde-‐free Fixing
Agent For Indigo Dyeing
Products For Washing Agents
Aquablue O : Detergent With OBA Aquablue : Detergent Without OBA Powerblue HYPO : AcBvator For Hypo Powerblue PER : AcBvator For Permanganate AnBblue BACK : Dispersing Agent Foamblue : Foamming Agent
Enzymes
Dsizeblue : Desizing Enzyme Lacblue X : Laccase Enzyme Enzyblue AG : Neutral Liq. Stonewash
Enzyme 60°C Indiblue E7 : Stonewash Enzyme 40-‐60 °C Indiblue NORM : Stonewash Enzyme 60 °C Enzyblue BP : Acidic Bio-‐Pollishing
Enzymes 60°C
Products For SoPener & Silicone
SoPblue CLK : CaBonic SoGener SoPblue OZONE : AnB-‐Ozone SoGener
SoPblue CLS : Concentrated FuncBonal Silicone SoGener
SoPblue MIC : Micro Silicone Emulsion
SoPblue MAC : Macro Silicone Emulsion
Products For Special Effects
Coatblue P-‐SOFT : Polyurethane Emulsion For SoG Handle
Coatblue P-‐H : Polyurethane Emulsion For SBff Handle
Coatblue P-‐M : Polyurethane Emulsion For SoG Handle and Shinny
Indigo Ground 3D : Gel Indigo
Coatblue PE : Polyethylene Emulsion
Resins
Resinblue : Resin Finishing (Included Catalyst)
Resinblue ML : Self-Cross Linking Resinblue NO TEAR : Acrylic & PU Emulsion,
Soft Handle Resinblue STIFF : Acrylic & PU Emulsion,
Hard Handle Resinblue WAVY : Resin 3-D Effect
Improver
Resinblue Resin Finishing (Included Catalyst)
USES:
Cross-‐linking agent for easy-‐care finishing, permanent three dimensional effects (plisse), grey shade and unwashed look
APPLICATIONS :
Recipe 1 : Standard Resin ApplicaBon (Spray)
200gr Resinblue
100gr Resinblue NOTEAR
700 gr Water
Recipe 2 : Resin ApplicaBon For High 3 D (Spray)
200gr Resinblue
100gr Resinblue NOTEAR
20gr Resinblue WAVY
20 gr Resinblue ML
660 gr Water
Recipe 3 : Resin ApplicaBons For High Strength
200gr Resinblue 100gr Resinblue NO TEAR 100gr Coatblue PE 20 gr Resinblue ML 600 gr Water
Recipe 4 : Resin ApplicaBon For Ultra Grey Cast
200gr Resinblue 100gr Resinblue NO TEAR 100gr Fixblue -‐ I 550 gr Water
Recipe 5 : Resin ApplicaBons For Extra Bright Look 200gr Resinblue 150gr Coatblue PE 100gr SoGblue MAC 500 gr Water
Resinblue Resin Finishing (Included Catalyst)
Resinblue ML Self-‐Cross Linking
USES: Self –cross linking resin finishing agent for the easy-‐care finishing of texBles made from cellulosic fibre material. For improving the shrink and swelling ressistance for se?ng permanent shintz, rippling or embossing. Resinblue-‐ML is a melamine formaldeyhde also used as extender for coaBng process.
APPLICATION : Recipe 1 : at Low Temperature For High Strength
200 gr Resinblue 100 gr Resinblue NO TEAR 20 gr Resinblue ML 680 gr Water
Recipe 2 : SoG Handle CoaBng
400 gr Coatblue P-‐SOFT 50 gr Coatblue PE 30 gr SoGblue MAC 20 gr Resinblue ML 500 gr Water X gr Pigment
Spray Drying at 100°C for 10min. Curing at 135°C for 15min.
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Resinblue NO TEAR Acrylic & PU Emulsion, SoG Handle
USES: Decreases the strength loss. Mixture of acrylates and gives grey cast Aqueous acrylic & polyurethanes emulsion for coaBng. Forms elasBc , soG and sBcky film. Product can be used as strength improver in resin applicaBon. Resinblue NO TEAR improves fastness of reacBve , direct indigo and pigment dyes.
APPLICATION : Recipe 1 : Standard Resin ApplicaBon
200 gr Resinblue 100 grResinblue NO TEAR 700 gr Water
Recipe 2 : Standard Pigment ApplicaBon
100gr Resinblue NO TEAR X gr Pigment X grPigment 900 gr Water
Recipe 3: For Extra Strength Increase
5 gr/ltResinblue NO TEAR 5 gr/ltCoatblue PE
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Resinblue STIFF Acrylic & PU Emulsion, Hard Handle
USES: Self-‐cross linking water based acrylic ester dispersion. Forms high strength and hard-‐ tenacity film. Resistant to washing and dry cleaning.
APPLICATION : Recipe 1 : Resin ApplicaBon For High 3 D 200 gr Resinblue 100 gr Resinblue NO TEAR 20 gr Resinblue WAVY 20 gr Resinblue STIFF 660 gr Water
Recipe 2 : Resin ApplicaBon At Low Temperature For High Strength 200 gr Resinblue 100 gr Resinblue NO TEAR 20 gr Resinblue STIFF 20 gr Resinblue ML 660 gr Water
Recipe 3 : Paper Touch Effect 100 gr Resinblue (Spray) 50 gr Resinblue NO TEAR 150 gr Resinblue STIFF 700 gr Water
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Resinblue WAVY Resin 3-‐D Effect Improver
USES: Resinblue WAVY is a combinaBon of special polymers uses as wrinkle resistant agent and 3D effect improver. Product is applicable aGer Indigo-‐Dyeing and CoaBng process and improves strength aGer resin applicaBon
APPLICATION :
Recipe 1 : Resin ApplicaBon For High 3 D 200 gr Resinblue 100 gr Resinblue NO TEAR 20 gr Resinblue WAVY 20 gr Resinblue STIFF 660 grWater
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Recipe 2 : Good Hand Sanding Effect 100 gr Resinblue WAVY 900 gr Water
Spray Curing at 155°C for 15min.
Fastness Improvement
Fixblue – I :Formaldehyde-free Fixing Agent For Indigo Dyeing
Fixblue -‐ I Formaldehyde free fixing agent for indigo dyeing
USES: Special fixing agent for indigo dyeing. Suitable for improving rub fastness of reacBve, sulphure and pigment dyeing.
APPLICATION :
Recipe 1 : Fixing Agent Recipe
2 –3 gr/lt Fixblue -‐ I
Recipe 2 : Fixing Agent Recipe
3 –4 gr/lt Fixblue -‐ I 3 –4 gr/lt Resinblue NO TEAR
Recipe 3: Resin applicaBon for Ultra Grey Cast
200 gr Resinblue 100 gr Resinblue NO TEAR 100 gr Fixblue I 600 gr Water
Drying at 100°C for 10min. Curing at 155°C for 15min.
Washing Agents
Aquablue O :Detergent With OBA
Aquablue :Detergent Without OBA
Washblue LYCRA :Washing-‐off Agent For Lycra Content Fabric
Washblue MACHINE :Washing Agent For Cleaning Machine
Artblue OLD :Vıntage Bleaching Agent Powerblue HYPO :AcBvator For Hypo
Powerblue PER :AcBvator For Permanganate
Foamblue :Special Agent for Foambleach
Aquablue O Detergent with OBA
USES:
Washing agent with opBcal brightening agent (OBA) for cleaning cokon, syntheBc and their blends . Product is effecBve at all water temperature.
APPLICATION :
Recipe : AGer Stone Wash
1 – 2 gr/lt Aquablue O
Temp : 55-‐60 °C
Time: 10 -‐ 20 min
Drain
Hot Rinse-‐60°C–2min
Aquablue Detergent without OBA
USES:
CombinaBon of surfactants and special polymers . Product uses as washing agent without OBA and effecBve at all water temperature.
APPLICATION :
Recipe : AGer Stone Wash
1 – 2 gr/lt Aquablue
Temp : 55-‐60 °C
Time: 10 -‐ 20 min
Drain
Hot Rinse-‐60°C–2min
Cold Rinse -‐ 25 °C – 2 min
Washblue LYCRA Washing-‐off agent for lycra content fabric
USES:
Special washing agent for cleaning elastane-‐contented mateial .Product helps to improve elasBcity and elasBc recovery of garment.
APPLICATION :
Recipe :
2–3gr/lt Washblue LYCRA
Temp : 55-‐60 °C
Tıme: 25 -‐ 35 min
Drain
Hot Rinse-‐60°C–2min Cold Rinse -‐ 25 °C – 2 min
Washblue MACHINE Washing agent for cleaning machine
USES:
Special product for the cleaning of dyeing , washing machines and apparatus , such as package dyeing machines , winch becks, beam , jet and overflow machines.
APPLICATION :
Recipe :APer Garment Dye
1 – 2 gr/lt Washblue MACHINE
Temp : 55-‐60 °C
Time: 10 -‐ 15 min
Drain
Hot Rinse-‐60°C–2min
Cold Rinse -‐ 25 °C – 2 min
Artblue OLD Special Bleaching agent
USES:
Special Bleaching agent for indigo
APPLICATION :
Recipe :
3–4gr/lt Artblue OLD
Ph: 4 -‐ 4,5
Temp : 80-‐85 °C
Time: 15 -‐ 25 min
Drain
Hot Rinse-‐60°C–2min Cold Rinse -‐ 25 °C – 2 min
Powerblue HYPO Hypo AcBvator
USES:
Uses for acBvaBng Hypo
APPLICATION :
Recipe :
0,5 -‐ 1g/lt Powerblue HYPO
10 gr/lt Sodium hypochlorite
Temp : 50-‐60 °C
Time : 10 -‐ 20 min
Drain
0.3–0.5 gr/lt NeutralizaBon agent
Temp : 50-‐60 °C
Tıme : 10 min
Drain
Hot Rinse-‐60°C–2min Cold Rinse -‐ 25 °C – 2 min
Powerblue PER AcBvator Permanganate
USES:
Uses As Permanganate AcBvator
APPLICATION :
Recipe :
20 – 30 g/lt Powerblue PER
PERMANGANATE SPRAY
0.3–0.5 g/l NeutralizaBon Agent
Temp : 50-‐60 °C
Tıme:10 min Drain Hot Rinse-‐60°C–2min
Cold Rinse -‐ 25 °C – 2 min
Foamblue Special Foamming agent
USES:
Special Foamming agent for special indigo bleaching
APPLICATION :
Recipe :
2-‐3 gr/lt Artblue OLD
4-‐7 lt Sodiumhypoclorid
Foam ApplicaBon
Drain
NeutralizaBon
We^ng and Dispersing Agents
AnBblue BACK : Dispersing Agent
Aquablue WET : AnB-‐creasing and Nonionic we?ng agent
Aquablue WET AnB-‐creasing and Non-‐Ionic We?ng Agent
USES:
Running crease inhibitor for bleaching and dyeing CO, CV, WO, PES, PA and PAN as well as their blends. Suitable for applicaBon on winch becks, jets and overflow dyeing machines both at the boil and in the HT range.
Recipe :
0,5 – 1 g/lt Dsizeblue (amylase enzyme for removing of size)
0,5 – 1 g/lt AnBblue BACK (dispersing and washing agent)
0,5 – 1 g/lt Aquablue WET (AnB-‐creasing and we?ng agent)
pH : 6-‐7
Temp : 50-‐60 °C
Time : 10 -‐ 20 min Drain
Hot Rinse-‐60°C–2min
Aquablue BACK
Dispersing Agent
USES:
Special scouring and dispersing agent for all types of fabric with properBes inhibiBng backstaining, especially for washing indigo –dyed denim or other garments
Recipe :
0,5 – 1 g/lt Dsizeblue (amylase enzyme for removing of size)
0,5 – 1 g/lt AnBblue BACK (dispersing and washing agent)
0,5 – 1 g/lt Aquablue WET (AnB-‐creasing and we?ng agent)
pH : 6-‐7
Temp : 50-‐60 °C
Time : 10 -‐ 20 min
Drain
Hot Rinse-‐60°C–2min
Enzymes
Dsizeblue : Desizing Enzyme
Lacblue X : Laccase Enzyme
Enzyblue AG : Neutral Liquid Stone Wash & Biopolishing Enzyme
Indiblue E7 : Stonewash Enzyme for 40-‐60°C
Indiblue NORM : Stonewash Enzyme for 60 °C
Enzyblue BP : Acidic Bio-‐polishing Enzyme
Dsizeblue Desizing Enzyme
USES:
PreparaBon of amylase and surface acBve agent. Dsizeblue is a special product to remove all natural sizing agents for denim fabrics.
APPLICATION :
Recipe :
0,5 – 1 g/lt Dsizeblue (amylase enzyme for removing of size)
0,5 – 1 g/lt AnBblue BACK (dispersing and washing agent)
0,5 – 1 g/lt Aquablue WET (AnB-‐creasing and we?ng agent)
pH : 6-‐7
Temp : 50-‐60 °C
Time : 10 -‐ 20 min
Drain
Hot Rinse-‐60°C–2min
Lacblue X Laccase Enzyme
USES:
CombinaBon of special enzymes recommended for denim washing process especially for wash-‐down treatment for grayish effect.
APPLICATION :
Recipe : Laccase Recipe
0,5 –1 gr/lt Lacblue X 0,5 – 1 gr/lt AnBblue BACK ( dispersing agent )
Ph : 5 – 5,5 Temperature : 55-‐60 °C Time: 15-‐20 min Drain
Hot rinse (60°C–2min) Cold Rinse (25°C –2min)
Enzyblue AG Neutral Liquid Stone Wash & Biopolishing Enzyme
USES:
Biocatalyst for the removal of pills and for the permanent anBpilling finishing of cellulosic fibres.
APPLICATION :
Recipe : Neutral Liqiud Resin ApplicaBon At Low Temperature For High Strength
0,5 – 1 gr/lt Enzyblue AG 0,5 – 1 gr/lt AnBblue BACK ( Dispersing Agent )
pH: 7 Temp : 55-‐60 °C Time: 30min-‐ 60min Drain
1 -‐ 2 gr/lt Aquablue O
Temperature : 55-‐60 °C Time: 10 min Drain
Hot rinse (60°C–2min) Cold Rinse (25°C –2min)
Indiblue E-‐7 Stonewash Enzyme for 40-‐60 °C
USES: Neutral cellulase formulaBon with addiBonal dispersing agent to obtain low-‐backstaining Stone-‐wash effect on indigo-‐dyed fabric.
APPLICATION : Recipe : Stone Wash Enzyme For 40-‐60°C
0,2 – 0,3 gr/lt Indiblue E-‐7 0,5 – 1,0 gr/lt AnBblue BACK ( dispersing agent )
Ph : 7 Temperature : 40-‐60 °C Time: 30-‐60 min Drain Hot rinse (60°C–2min) Cold Rinse (25°C –2min)
AGer Stone Wash
1 -‐ 2 gr/lt Aquablue O
Temperature : 55-‐60 °C Time: 10 min Drain
Hot rinse (60°C–2min) Cold Rinse (25°C –2min)
Indiblue NORM Stonewash Enzyme for 60°C
USES: Neutral cellulase formulaBon with addiBonal dispersing agent to obtain low-‐backstaining Stone-‐wash effect on indigo-‐dyed fabric.
APPLICATION : Recipe : Stone Wash Enzyme For 60°C
0,5 – 1,0 gr/lt Indiblue NORM 0,5 – 1,0 gr/lt AnBblue BACK ( dispersing agent )
Ph : 7 Temperature : 60 °C Time: 30-‐60 min Drain Hot rinse (60°C–2min) Cold Rinse (25°C –2min)
AGer Stone Wash
1 -‐ 2 gr/lt Aquablue O
Temperature : 55-‐60 °C Time: 10 min Drain
Hot rinse (60°C–2min) Cold Rinse (25°C –2min)
Enzyblue BP Acidic Bio-‐polishing Enzyme
USES: Biocatalyst for the removal of pills and for the permanent anBpilling finishing of cellulosic fibers.
APPLICATION : Recipe : Neutral Liqiud Resin ApplicaBon At Low
Temperature For High Strength
0,5 – 1 gr/lt Enzyblue BP 0,5 – 1 gr/lt AnBblue BACK ( Dispersing Agent )
pH: 5-‐5,5 Temp : 55-‐60 °C Time: 30min-‐ 60min Drain
AGer Enzyme Wash
1 -‐ 2 gr/lt Aquablue O
Temperature : 55-‐60 °C Time: 10 min Drain
Hot rinse (60°C–2min) Cold Rinse (25°C –2min)
SoPeners & Silicone
SoPblue MIC : Micro Silicone Emulsion SoPblue MAC : Macro Silicone Emulsion SoPblue OZONE : AnB-‐Ozone SoGener DenisoP ELASTIC : Special Silicone Emulsion For
Increasing ElasBcity SoPblue CLS : CaBonic SoGener SoPblue CLK : FuncBonal Silicone SoGener
SoPblue CLK CaBonic SoGener
USES:
CaBonic soGener to obtain soG handle for the treatment of indigo-‐dyed and jeans arBcles made from CO and its blends.
APPLICATION :
Recipe : CaBonic SoPener Recipe
0,4-‐ 0,6 gr/lt SoGblue CLK
pH: 5-‐5,5
Temp : 35-‐40 °C Time: 10 min
SoPblue OZONE AnB-‐Ozone SoGener
USES:
Nonionic faky acid condensaBon product to get soG handle and eliminate yellowing problem of indigo -‐ dyed material.
APPLICATION :
Recipe : AnB-‐Ozone SoPener Recipe
3 – 4 gr/lt SoGblue OZONE
pH: 5-‐5,5
Temp : 35-‐40 °C
Time: 10 min
SoPblue CLS FuncBonal Silicone SoGener
USES:
Concentrated FuncBonal Silicone SoGener to obtain soG handle for the treatment of indigo-‐dyed and jeans arBcles made from CO and its blends.
APPLICATION :
Recipe : CaBonic SoPener Recipe
0,4-‐ 0,6 gr/lt SoGblue CLS
pH: 5-‐5,5
Temp : 35-‐40 °C
Time: 10 min
SoPblue MIC Micro Silicone Emulsion
USES:
Silicone micro emulsion for obtaining soGness and smoothness. Special product for spray, foulard and exhaust applicaBon.
APPLICATION :
Recipe : Micro Silicone Recipe
2 – 3 gr/lt SoGblue MIC
pH: 5-‐5,5
Temp : 35-‐40 °C
Time: 10 min
Drain
SoPblue MAC Macro Silicone Emulsion
USES:
Nonionic form of macro silicone emulsion. SoGblue MAC using for ge?ng extremely soG and slippery hand
APPLICATION :
Recipe :Macro Silicone Recipe
1 -‐ 2 gr/lt SoGblue MAC
pH: 5-‐5,5 Temp : 35-‐40 °C
Time: 10 min
SoPblue ELASTIC Special Silicone Emulsion For Increasing ElasBcity
USES:
Nonionic micro silicone emulsion. SoGblue ELASTIC is a special product improves elasBcity and elasBc recovery. Nonionic micro silicone emulsion.
SoGblue ELASTIC is a special product improves elasBcity and elasBc recovery.
APPLICATION :
Recipe : Micro Silicone Recipe
3 – 5 gr/lt SoGblue ELASTIC
pH: 5-‐5,5
Temp : 35-‐40 °C
Time: 10 min Drain
Special Effects
Coatblue P-‐SOFT : Polyurethane Emulsion For SoG Handle
Coatblue P-‐M : Polyurethane Emulsion For Medium Handle
Coatblue P-‐H : Polyurethane Emulsion For SBff Hand
Coatblue P-‐C : CaBonic Polyurethane Emulsion
Coatblue P-‐Shine : Polyurethane Emulsion For SoG Hand AndShinny Effect
Coatblue ASA : AnB-‐slippary Agents
Coatblue PE : Polyethylene Emulsion
Coatblue Thick-‐A : Thickener
Coatblue Thick-‐B : Thickener Artblue OILY : Special Product For Oily Effect
Coatblue P-‐SOFT Polyurethane Emulsion For SoG Handle
USES: It is suitable for very soG, highly elasBc coaBngs with gum-‐like surface. CoaBng agent with very soG , sBcky , highly elasBc and transparent film.
APPLICATION :
Recipe 1 : Polyurethane Emulsion For SoG Handle
200 gr Resinblue 200 gr Coatblue P-‐SOFT 600 gr Water
Spray Drying at 100 °C for 10 min Curing at 155 °C for 15 min
Recipe 2 CoaBng with soG handle and bright looking
400 gr Coatblue P-‐SOFT 600 gr Water
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Coatblue P-‐SOFT Polyurethane Emulsion For SoG Handle
Recipe 3 : CoaBng with extra bright looking and extra soG handle
400 gr Coatblue P-‐SOFT 100 gr SoGblue MIC 500 gr Water X gr Pigment
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Recipe 4 : Bright and slippery handle coaBng
200 gr Resinblue 100 gr Coatblue P-‐SOFT 100 gr Coatblue PE 20 gr Resinblue ML 600 gr Water
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Coatblue P-‐M Polyurethane Emulsion For Medium Hand
USES: CoaBng agent for medium hard film with good adhesion properBes.
APPLICATION :
Recipe 1 : Polyurethane Emulsion For Medium Handle
200 gr Resinblue 200 gr Coatblue P-‐M 600 gr Water
Recipe 2 : CoaBng with soG handle and bright looking
500 gr Coatblue P-‐SOFT 500 gr Water X gr Pigment
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Recipe 3 : CoaBng with extra bright looking and extra soG handle
450 gr Coatblue P-‐M 100 gr Coatblue PE 50 gr SoGblue MIC 500 gr Water X gr Pigment
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Recipe 4 : Bright and slippery handle coaBng
200 gr Coatblue P-‐M 100 gr SoGblue ELASTIC 100 gr SoGblue MAC 600 gr Water
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Coatblue P-‐M Polyurethane Enulsion For Medium Hand
Coatblue P-‐H Polyurethane Emulsion For SBff Handle
USES: CoaBng agent for very hard film with very good adhesion properBes and suitable for manufacturing plisse arBcles.
APPLICATION : Recipe 1 : Polyurethane Emulsion For SBff Handle
200 gr Resinblue 150 gr Coatblue P-‐H 600 gr Water
Recipe 2
150 gr Coatblue P-‐H 100 gr Coatblue PE 50 gr SoGblue MIC 50 gr SoGblue MAC 650 gr Water
Coatblue P-‐C CaBonic Polyurethane Emulsion
USES:
CaBonic coaBng agent for ge?ng soG handle effect and high stability to hydrolysis
APPLICATION :
Recipe 1 : Polyurethane Emulsion For SoG Handle
200gr Resinblue
200gr Coatblue P-‐C
600 gr Water
Recipe 2 CoaBng with soG handle and bright looking
400gr Coatblue P-‐C
600 gr Water
Spray Drying at 100 °C for 10 min Curing at 155 °C for 15 min
Spray Drying at 100 °C for 10 min Curing at 155 °C for 15 min
Recipe 3 : CoaBng with extra bright looking and extra soG handle
450 gr Coatblue P-‐C
100 gr Coatblue PE
120 gr SoGblue MIC
330 gr Water
X gr Pigment
Recipe 4 : Bright and slippery handle coaBng
500 grCoatblue P-‐C
100 grSoGblue MIC
100 grSoGblue ELASTIC
300 gr Water
Spray Drying at 100 °C for 10 min Curing at 155 °C for 15 min
Spray Drying at 100 °C for 10 min Curing at 155 °C for 15 min
Coatblue P-‐C CaBonic Polyurethane Emulsion
Coatblue P-‐SHINE Polyurethane Emulsion For SoG Hand and Shinny Effect
USES:
CaBonic coaBng agent for ge?ng soG handle effect and high stability to hydrolysis
APPLICATION :
Recipe 1 : Polyurethane Emulsion For SoG Handle
200 gr Resinblue 200 gr Coatblue P-‐SHINE 600 gr Water
Spray Drying at 100 °C for 10 min Curing at 155 °C for 15 min
Recipe 2 : CoaBng with soG handle and bright looking
500 gr Coatblue P-‐SHINE 600 gr Water
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Recipe 3 : CoaBng with extra bright looking and extra soG handle
450 gr Coatblue P-‐SHINE 100 gr Coatblue PE 50 gr SoGblue MIC 400 gr Water X gr Pigment
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Recipe 4 : Bright and slippery handle coaBng
500 gr Coatblue P-‐SHINE 100 gr SoGblue MIC 100 gr SoGblue ELASTIC 300 gr Water
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Coatblue P-‐SHINE Polyurethane Emulsion For SoG Hand and Shinny Effect
Coatblue ASA Polyurethane Emulsion For SBff Handle
USES: CombinaBon Of Special Polymers For Ge?ng AnB-‐slippary Effect. White Emulsion CompaBble With Nonionic And CaBonic Substances Has Excellent AnB-‐slippery Effect Does Not NegaBve Effect To The SoG Handle Of Material
APPLICATION : Recipe 1 : AnB-‐ Slippary& Paper Effect
200 -‐ 400 gr Coatblue ASA 800 -‐ 600 gr Water
Recipe 2
100 – 200 gr Coatblue ASA
Recipe 3
8 – 10 gr/lt Coatblue ASA
Spray Drying at 100 °C for 15 min
Dipping Drying at 80°C for 40min
ExhausBng Drying at 80°C for 40min.
Coatblue PE Polyethylene Emulsion
USES: Strength improver in resin finishing as well as other finishing applicaBons . Products gives soGness and sweability property to the material. Dilutable in cold water High smoothness and slippery effects Lower fricBon values Improves tear strength of the finish good
APPLICATION : Recipe 1 : Resin finishing with high strength
50 – 100 gr/l CoatbluePE 150 – 300 gr/l Resinblue 50 – 100 gr/l Resinblue NOTEAR 750 -‐ 500 gr Water
Recipe 2 CoaBng with soG handle and bright looking
5 gr/l CoatbluePE 3 gr/l Resinblue NOTEAR
Spray Drying at 100 °C for 10 min Curing at 155 °C for 15 min
ExhausBng Temperature 30 – 35 °C DuraBon 10 – 15 min. Tumbler Drying 70 °C for 40 min.
Recipe 3 : CoaBng with extra bright looking and extra soG handle
450 gr Coatblue P-‐SHINE 100 gr Coatblue PE 50 gr SoGblue MIC 400 gr Water X gr Pigment
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Recipe 4 : Bright and slippery handle coaBng
500 gr Coatblue P-‐E 100 gr SoGblue MIC 100 gr SoGblue ELASTIC 300 gr Water
Spray Drying at 100°C for 10min. Curing at 155°C for 15min.
Coatblue PE Polyethylene Emulsion
Artblue OILY Special Product For OILY Effecy
USES:
Special product for oily effect
APPLICATION :
Recipe 1 :
300 gr/lt Artblue OILY
50 gr/lt Coatblue PE
500 gr/lt Water
Curing at 55°C for 15 min
Coatblue Thick – A Thickener of Resin
USES: Natural thickener for prinBng of reacBve and dispers dyes to the fabric made from CO and PES fibers and their blends.
APPLICATION :
Recipe 1 : CoaBng Recipe of Resin
300 gr/lt Coatblue P-‐ SOFT 50 gr/lt Coatblue PE 30 gr/lt SoGblue MAC 5 gr/lt NH3 X gr/lt Coatblue Thick – A
Drying at 120 °C for 1 min Calendaring – Press-‐ 150 °C Curing at !80°C for 1 min
Coatblue Thick – B Thickener of Resin
USES: Natural thickener for prinBng of reacBve and dispers dyes to the fabric made from CO and PES fibers and their blends.
APPLICATION :
Recipe 1 : CoaBng Recipe of Resin
100 gr/lResinblue 100 gr/lCoatblue P-‐ SOFT 30 gr/lSoGblue MAC 5 gr/l NH3 X gr/ltCoatblue Thick – B
Drying at 120 °C for 1 min Calendaring – Press-‐ 150 °C Curing at !80°C for 1 min