deflector tm inventor, matt stodola · 2017-11-16 · the next time you pick up a screw gun, the...
TRANSCRIPT
Deck MasterTM inventor, Jason Lindquist
RocLocTM inventor, John Fitzsimmons
DeflectorTM inventor, Matt Stodola
dbcdesigned by a
cabinetmaker / contractor
www.fastcap.comdbcdesigned by a cabinetmaker
Description Part Number USD
Magnetic Micro Square MAG MICRO SQUARE $20.00
• Makes squaring up your table saw, band saw or any piece of equipment effortless! • Has 2 neodymium magnets embedded in the base• Sticks firmly to the cast iron table top and allows hands free adjustment of spindles, blades and fences• A time saver and greatly enhances accuracy• Built-in magnets allow you to store it the side or underneath your saw.
Rick Leamer came up with the idea to make the perfect Tip MagTM, but six months into it, we gave up. Fortunately, Mike Andrews, our engineer, had more persistence than I did. He came up with the perfect combination of polarity, strength and shape to make the Tip MagTM
the most powerful magnet you will ever use.
The next time you pick up a screw gun, the first thing you will do is make sure that it has a Tip MagTM. Regardless of where you position the Tip MagTM, close to the screw or at the base of the screw gun, the magnetic transfer is amazing. The Tip MagTM
also
works great on screwdrivers and 6” long extension bits.
0.26”
Description Part Number USD
Tip Magnet TIP MAG $10.00
Patent PendingPatent Pending
Built in neodymium magnets
Imperial scale on one side, Metric on
the reverse side
Outside scale for blade height
Inside scale great for layout!
Store it under your saw and out of the way, but right there when you
need it!
31
Patent Pending
My Grip™ is an innovative tool that gives you the ultimate comfort-grip on your hand tools. The unique material of the My Grip™ enables it to be remolded over and over again. Imagine having your custom formed grip!
Part Number USD
MY GRIP BLACK $10.00
MY GRIP YELLOW $10.00
MY GRIP BLUE $10.00
MY GRIP RED $10.00
MY GRIP CLEAR $10.00
MY GRIP LIME GREEN $10.00
MY GRIP BROWN $10.00
MY GRIP KHAKI $10.00
MY GRIP DARK KHAKI $10.00
MY GRIP OLIVE DINGY $10.00
MY GRIP SAFETY ORANGE $10.00
MY GRIP SAFETY YELLOW $10.00
MY GRIP CAMO $10.00
MY GRIP SPEED (Any color above) (2 pk) $4.99
a
Power Tools!
Sporting Goods!
Bicycles, Motor Bikes & ATVs!
SAFETY FIRSTGET A FIRM GRIP ON YOUR TOOLS
Speed Grip 4”x1.5”fast and easy!
PRO Tools
Great for...• Long Extension bits• For use with impact driver • Use on screw drivers• Picking up dropped screws• Re-magnetizing weak bit holder
Inventor, Cole Biasini
888-443-374832
• Helps keep your work area clean and more productive• Easy to set up and eliminates billowing dust • Contains water spray when used with tile saws• Serves as an excellent protective cover when working outside in inclement weather
“On a job site last week, I was very impressed with the ChopShop Saw Hood. I had my saw hood on the chop saw I was using. The painters were painting the wall of a staircase directly over and behind the chop saw. They were so confi dent in the saw hood’s ability to contain the dust, they went ahead and fi nished their painting. It was awesome!” Adam Rose
Creative Woodworking
New protective hood fl ap
Drop into accessory holes and open
Accessory Mount sold separately. See page 33.
Easily mounts in accessory holes
Patent Pending
Screws to workbench
Description Part Number USD
ChopShop Saw Hood SAWHOOD WHITE $129.00
44” Wide
32” Tall
31” Deep
Easily mounts to tile saws or other equipment with the Sawhood Tile Clamp.
Mounting posts can be cut to
desired length
Capture dust into box or built-in trough
Great forworking
outside in the rain...just
attach the flap, flip it up
over the topand go to
work
PRO Tools
Inventor,Marc Urban
www.fastcap.comdbcdesigned by a cabinetmaker 33
Clunky & dirty
PROBLEM
Time to setup?
FASTCAP’S SOLUTION
Sets up in seconds
Description Part Number USD
Mounting bracket for tile saw SAWHOOD TILE CLAMP $19.95
Clunky & dirty
PROBLEM
Finish one side only
FASTCAP’S SOLUTION
Hang it & fi nish both sides at once!
Description Part Number USD
Euro Finishing Clip (4 pk) EFC $4.00
Euro Finishing Clip (100 pk) EFC-BULK $90.00
Accessory Mount for mounting the Saw Hood on ANY Tool
Patent Pending
Screws to any stand
Post simply drops in
Clamps to any stand with 360° rotation
Lightweight & small - easy to transport
Clip it - hang it - fi nish it!
Say goodbye to the traditional drying method
The EFC clip is strong enough to hang a door using just 1 clip!
• Substitute for the accessory holes that are normally found on a miter box saw• Allows you to use the Saw Hood on a variety of different kinds of equipment, including a tile saw• Accessory brackets can be mounted two ways:
1. Using the clamping system 2. Screwed directly into the frame of the equipment.
• Allows you to spray both sides of the door by hanging the door vertically • No longer have to wait for one side to dry before you can finish the other side• Made of rugged spring steel, the EFCTM hangs on and will not let go• Cuts your finishing time in half!
PRO Tools
Inventor, Thomas Utely
888-443-3748
Constantly battling the problem of marking inside holes or up against deep wall applications, the new Long Nosed Pattern MarkerTM solves all those tricky layout problems. It is the ultimate permanent, waterproof marker with both a super fine long tip and a wide tip on the reverse side. Essential for every cabinet shop. It will be your favorite marking implement.
Great forhardware holes!
Ideal for tracing parts in detail!
TM
Description Part Number USD
Long Nose Pattern Marker LONG NOSE MARKER $5.00
“Reaching new depths...Going where no marker has gone before.”
1-1/8” extension (29 mm
)
Description Part Number USD
The FatBoy Pencil FATBOY PENCIL $14.95
Easy to sharpen, stays sharp longer than any pencil on earth
Great for framing
Great for finish-work
• Built-in eraser
• Removable clip
• Lightweight aluminum housing
• 5.5mm lead (3 included)
• Lead sharpens in standard pencil sharpener and retracts inside housing for safe storage
Easy to load, replacement lead available
3/8”
3/16”
7/16”
7/16”
• Conceal nails with ease • Instantly hold things together• A mechanical fastener that is not visible• Great for molding, trim work, drawer front installations, leveling picture frames • Can be used as an alignment pin systemSimply insert the dual head nail into the magnetized nail set and set the nail. Next, tap the molding or wood onto the protruding nail and you are done.
1/4” staples will never be a problem again! The new Staple SetterTM, invented by Todd Sullivan, solves the long time problem of misfired 1/4” staples. Recess crown staples perfectly at 1/16” below the surface, with just the tap of a hammer like your nail gun was supposed to, “Stop The StruggleTM”. Way to go Todd!
Wrong tool for the job...
Staple Set fi ts perfectly
Patent Pending
Patent Pending
Place Blind Nail where desired
Align wood to blind nails
Description Part Number USD
Blind Nail Set (tool only) BLIND NAIL SET $10.00
Blind Nail Kit (tool & 100 blind nails) BLIND NAIL KIT $12.50
Blind Nails 3/8” (100 pc) BLIND NAIL $5.00
Blind Nails 7/16” (80 pc) BLIND NAIL 7/16 $5.00
34
PRO Tools
A cross between a carpenter’s
pencil and a mechanical
pencil!
Description Part Number USD
Staple Setter STAPLE SETTER $10.00
Inventor, Todd
Sullivan
Inventor, Craig Circle
EXTREME Pencil TechnologyUltimate comfort • Stays sharp longer
Easy to sharpen • The BEST pencil on Earth!
www.fastcap.comdbcdesigned by a cabinetmaker 35
Stronger forms, less bracing
Capped, Uncapped, Removed
1 2 3
Original My Grip 5”x5”for big jobs & full wraps!
Clunky & dirty Streamlined & cleanCan’t find your screws and nails after pouring concrete? The new MUDheadTM System allows you to use screws to build stronger, faster forms.
PROBLEM
Hidden screws & nails
FASTCAP’S SOLUTION
Visible screws, easy to remove
Patent Pending
• Unique design protects your screws from getting mud on the head of the screw• Easily remove your screws and forms • Saves time and money and will not beat up your forms or your concrete work! • Screws available in sizes from 1-1/8” to 4”• Orange MUDheadTM
is sold separately and
works with conventional screws
Caution: No other screw gives you the power and strength of our PowerHead Screws, included in the MUDheadTM System
Great for vertical bracing
PROBLEM FASTCAP’S SOLUTION
Slow, tedious marking Fast, precise and perfectly accurate!
The Reveal SquareTM is an all-in-one tool that provides 8 different reveal dimensions for the
installation of your door and window mouldings.
Side one gives you a reveal of: 1/8”, 1/4”, 1/2” and 3/8.” Side two gives you a reveal of: 3/16”, 5/16”, 7/16” and 9/16.”
To use this innovative tool, simply slide the Reveal SquareTM along the edge of your window
or door frame at the desired reveal and mark with a pencil line the full length of the frame, or in
incremental distances. Installation of the moulding is fast, precise and effortless!
Finished trim with time saved!
Light and compact, yet completely durable
Choose one of 8 reveals
Description Part Number USD
Reveal Square REVEAL SQUARE $5.95
a
Press
Slide & Mark
Patent Pending
PRO Tools
Description Part Number USD
MUDhead (50 pc) No screws, just the orange MUDheadTM
MUDHEAD 50 PC $5.00
Cover caps for MUDheadTM - PVC White (2 sheets) FC-18MM MUDHEAD CAP $2.00
MUDheadTM System w/ 1.25” PowerHead Screws Wood (72 pc) MUDHEAD 1.25 SYSTEM $20.00
MUDheadTM System w/ 2.5” PowerHead Screws Wood (72 pc) MUDHEAD 2.5 SYSTEM $20.00
Inventor, Eric Anderson
Co-Inventors,Mark Hutton & Toby Williams
888-443-374836
One hand installation
Perfect with a joist jig
Clunky & dirty Streamlined & clean
Patent Pending
PROBLEM
2 Hand operation
FASTCAP’S SOLUTION
1 Hand operation!
Description Part Number USD
Joist Clip (2 pc) JOIST CLIP $10.00
Keep your fingers away from the business end of the hammer and your nail gun and let the Joist ClipTM do the work! Will Collins from Maine came up with this ingenious solution for holding the joist hangers in place. You will never wrestle with your joist hangers again. You will always get them on straight and tight! Throw 2 of these in your nail bag and they will be right behind your hammer and tape measure as the most valued tools you have.
Patent Pending
Straight line of screws across your whole deck
Works with 2x6 decking as well!
Straddles joists for a secure fi t and even spacing between boards
PROBLEM
Misaligned screws & unevenly spaced splintered boards
FASTCAP’S SOLUTION
Straight screws and evenly spaced boards
Master your deck with the Deck Master. Inventor, Jason Lindquist has created a tool that allows even a tyro builder the ability to construct a professional quality deck. The Deck Master evenly spaces 4” or 6” wide decking with a 1/4” gap and ensures that all your field and joint placement screws are perfectly aligned and in their exact position every time.
Description Part Number USD
Deck Master System DECK MASTER 2PK $19.95Patent Pending
PRO Tools
Inventor, Jason Lindquist
• Straddles the joist, spacing and aligning each board perfectly
• 4” wide decking
• 6” wide decking
• Field Screws
• Joint Screws
Inventor, Will Collins
HANDS FREE!
• 1/4” spacer
a
www.fastcap.comdbcdesigned by a cabinetmaker 37
Patent Pending
METRICSTANDARD
1 2 3OLD STANDBY
STANDARD
PS - 16’ & 25’
STANDARD REVERSE
TRUE32METRIC
REVERSE
STANDARD STORY POLE
PSSP - 16’ & 25’
PSSR - 16’ & 25’
PMS - 12’, 16’ & 25’
PMMR-TRUE32 - 16’
9Blade Styles
7InnovativeFeatures
• Lever action belt clip
• Pencil sharpener
• Dual locking system
• Erasable notepad
• Heavy-duty 1 inch blade
• High-contrast tape
• Rugged compact casing
Patent Pending
METRICREVERSE
FLATBACK 5MPMMR-FLAT 16
1 2OLD STANDBY
STANDARDFLATBACK 16’PS-FLAT 16
Auto lock feature means you simply press button to
release tape
Comfortable and ergonomic
Awesome for circumference
Great for panel layout
STANDARDSTORY POLEFLATBACK
16’
METRICSTANDARDFLATBACK
16’
PRO Tools
The SpeedClip on page 41 is the ultimate accessory for
your tape measure.
Description Part Number USD
ProCarpenter AutoLock PMS-16 AUTO LOCK $9.95
Flatback Standard Story Pole 16’ PSSP-FLAT16 $7.95
FlatBack Standard 16’ PMS-FLAT16 $7.95
Old Standby 16’ & 25’PS-16PS-25
$7.95$10.95
Standard Story Pole 16’ & 25’PSSP-16PSSP-25
$7.95$10.95
Standard Reverse 16’ & 25’PSSR-16PSSR-25
$7.95$10.95
Metric/Standard 12’, 16’ & 25’PMS-12PMS-16PMS-25
$6.95$7.95$10.95
True 32 Metric Reverse 5 M. PMMR-TRUE32 $7.95
Metric Reverse Flatback 5M PMMR-FLAT 16 $7.95
Old Standby Standard Flatback 16’ PS-FLAT16 $7.95
888-443-374838
The Pocket ChiselTM is the ultimate chisel, sharp when you need it, then safely stored in your pocket or apron. Now you can get the Pocket Chisel KitTM which includes the Diamond SharpenerTM
to keep you sharp, 2 super flexible stainless steel Pocket Putty KnifesTM and all 4 chisel sizes. The Pocket ChiselTM, the Ultimate Tool... now the Ultimate Kit!
Pocket Diamond Sharpener - 300/600 grit
Pocket Putty Knife
Pocket Combo Putty Knife
• Scraper• Putty knife• Crack opener• Grout cleaner• Paint roller cleaner
• Super flexible
Pocket Chisel 1” Blade
Pocket Chisel 3/4” Blade
Pocket Chisel 1/2” Blade
Pocket Chisel 1/4” Blade
PROBLEM FASTCAP’S SOLUTION
Safe and compactDull blade, torn pockets
Patent Pending
Stainless Steel Blade
Stainless Steel Blade
PRO Tools
After 5000 heavy blows... we gave out before it did!
YES!YOU CAN HIT IT
WITH A HAMMER
a
Description Part Number USD
Pocket Chisel Kit PC-KIT $129.95
Pocket Diamond Sharpener PC-DIAMOND SHARPENER $29.95
Pocket Putty Knife POCKET PUTTY KNIFE $10.00
Pocket Combo Putty Knife POCKET COMBO PUTTY $10.00
Pocket Chisel 1”Blade PC-1 POCKET CHISEL $29.95
Pocket Chisel 3/4” Blade PC-3/4 POCKET CHISEL $29.95
Pocket Chisel 1/2” Blade PC-1/2 POCKET CHISEL $29.95
Pocket Chisel 1/4” Blade PC-1/4 POCKET CHISEL $29.95Hard shell case (Green) PC-CASE $10.00
$17975
Value!
$50 Savings!
Kit only $12995
www.fastcap.comdbcdesigned by a cabinetmaker 39
Pocket Diamond Sharpener - 1000 grit
Hap’s Pocket Laminate Knife
Pocket Pull Saw
Pocket File/Rasp
Pocket Awl
a
PRO Tools
The Pocket Tool KitTm includes 7 tools:
• Pocket Awl• Pocket Diamond Sharpener 1000 grit• Hap’s Pocket Laminate Knife • Pocket Saw• Pocket File/Rasp• Pocket Putty Knife • Pocket Combo Putty Knife.
• 18 TPI saw blade• Super flexible thin blade (.015”)
PROBLEM FASTCAP’S SOLUTION
Organized!Messy and cumbersome
• Wood file on one side• Wood rasp on back side
• Great for scoring laminate• Guarantees a chip-free cut
Inventor of the Pocket Chisel,
Paul Galusha
Inventor of the Pocket Laminate Knife,
Hap Luedke Description Part Number USD
Pocket Tool Kit POCKET TOOL KIT $74.95
Pocket Diamond Sharpener - 1000 POCKET SHARPEN 1000 $29.95
Pocket Awl POCKET AWL $12.99
Pocket Pull Saw POCKET PULL SAW $10.00
Pocket File POCKET FILE $12.99
Hap’s Pocket Laminate Knife POCKET LAMINATE $12.99Patent Pending
The popular Pocket ChiselTM series has expanded to include Pocket ToolsTM!
$10892
Value!
Over $30 Savings!
Kit only $7495
888-443-3748
Description Part Number USD
Pro Grip Hammer PROGRIP 16-FH $16.95 Patent Pending
• FastCap® branding isetched into handle
• Integrated Speed GripTM .
Each Pro GripTM hammer includes
a Speed GripTM that can be heated
with a heat gun and custom molded to your hand.
• 1-1/8” smoothfinish head
• Precision ground 16 oz. straight claw finish head
• Custom carved solidhickory pro style handle
GRIPFINISH HAMMER
Magnetic nail starter
Pro style handle
A heat gun can be used to reheat and re-stick the SpeedGrip
Solid Hickory
40
Adjustable hook & loop closure
Large magnetic surface area
Quick dip and go....
• Contains 9 neodymium, high performance magnets • A comfortable and adjustable hook & loop wrist strap • Never be without your screws and bits again!• Holds screws, bits, parts and other small tools!
FREEPowerHead
Screws sample pack included
• Made out of rugged ballistic nylon• Rivets in critical high wear points• Slides through any belt• Smaller pocket to hold crow bar or nail puller
Features...
Patent Pending
Always within easy reach!
PRO Tools
Inventor, Danny Roy
Description Part Number USD
Hammer Holster HAMMER HOLSTER $9.95
Description Part Number USD
ProHold PRO HOLD $19.95
Inventor, John
Willis