defence industries product guide - chemsol · metal set steel or aluminium filled epoxy putty for...

8
Defence Industries Product Guide

Upload: others

Post on 24-Aug-2020

10 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Defence Industries Product Guide - Chemsol · Metal Set Steel or aluminium filled epoxy putty for Aluminium-H1 3475 repairing broken castings,worn fittings,etc. Steel 3463 Metal Magic

Defence Industries Product Guide

Page 2: Defence Industries Product Guide - Chemsol · Metal Set Steel or aluminium filled epoxy putty for Aluminium-H1 3475 repairing broken castings,worn fittings,etc. Steel 3463 Metal Magic

TH

RE

AD

LOC

KIN

G

Colour - Typical SubmarineStore Code

Product No. Application/DescriptionTypical Viscosity Strength

SpecificationApproval

H1 - ARMY0425 - NAVY

932 Very low strength threadlockingYellow/Brown

1-3*DTD5629 H1

125cps GRADE 1 0425

221 Low strength threadlockingRed

3-7*DTD5630

BLIH1

125cps GRADE 1 0425

222Low strength threadlocking with Purple

3-11* AFS1737A BLIH1

controlled torque/tension 1000cps 0425

225 Low strength, large diameter threadlockingRed/Brown

3-7*DTD5630

GH1

6000cps GRADE 3 0425

241 Medium strength threadlockingBlue

7-13*DTD5631

LIH1

125cps GRADE 1 0425

242Medium strength threadlocking with Blue

8-18 AFS1737A BLI H1controlled torque/tension 1000cps

243Medium strength ideal on passive Blue

15-25 AFS1993 G H1surfaces, oil tolerant 12,000cps

245Medium strength, large diameter Blue

7-13*DTD5631 H1

threadlocking 6000cps GRADE 4 0425

270High strength threadlocking, Green

>19*DTD5633

BLIH1

Medium strength retaining 500cps GRADE 3 0425

275High strength, large diameter Green

>19*DTD5633 H1

threadlocking and gasketing 7000cps GRADE 4 0425

290Penetrating adhesive for locking pre-assembled Green

>19*DTD5633

BLIH1

parts/sealing porous castings and welds 15cps GRADE 1 0425

High strength - high temp. gasket RedH1

510eliminator - gap filling 0.25mm Paste

5-15* AFS1696 7DB9AHY

518Gasket eliminator - gap filling up to Red

5-13‡ H10.5mm for use on aluminium 125cps

542Hydraulic/pneumatic sealant for fittings Blue

7-13*DTD5631

BLIH1

up to 1" BSP 600cps GRADE 3 0425

572General purpose pipe sealant PTFE filled White

4-10* AFS1374B GH1

for water, air, oil, etc. Paste 0425

573Low strength gasket eliminator - gap Green

3-8‡ AFS1664A LIH1

filling up to 0.25mm Paste 0425

574High strength gasket eliminator for flexible Orange

5-12‡ AFS1628A BLIH1

joints - gaps up to 0.5mm Paste 0425

577 Fast cure pipe sealAmber

6-15‡ AFS1433B GH1

500cps 9AHY

5900Non-slump, non-corrosive, Metallic black

2‡ G H1resistant to motor oils Extrusion 35g/min

5920High temperature, non-slump, Metallic copper

1.4‡ H1non-corrosive, resistant to motor oils Extrusion 275g/min

5922 Formerly FAG2 Gasket DressingBlack Pressure resistant

H1600,000 to 34 Mps

GA

SK

ET

ING

& S

EA

LIN

G

601High Strength retaining Green

>19*DTD5633

BLIH1

Diametrical clearance to 0.1mm 125cps GRADE 2 0425

620High strength, very high temp. retaining Green

17-37† AFS1737A H1Diametrical clearance to 0.15mm 7000cps

638High strength retaining, fast cure Green

22-40† AFS1433B BLI H1Diametrical clearance to 0.25mm 2500cps

641Medium strength retaining for easy Yellow

7-16† AFS1737A BLI H1disassembly. Diametrical clearance to 0.15mm 550cps

648High strength, high temp. retaining Green

18-35† AFS1433B BLIH1

Diametrical clearance to 0.15mm 500cps 0425

CY

LIN

DR

ICA

LR

ETA

ININ

G

7471Activator for anaerobic products to speed

Amber - AFS2292 BLIH1

cure through larger gaps 0425

734 Activator for 312 and 317 adhesives forAmber - AFS1100B

H1Activator F fast cure 0425

7647 Activator for anaerobic products to speed Green - AFS2292 BLI

H1Activator N cure on passive surfaces 0425

7061 Cleans and degreases components Clear -H1

0425

7070 Cleans and degreases components Clear - H1

7200 Foaming gasket remover White foam - H1

CLE

AN

ER

S/

AC

TIV

AT

OR

S

Shelf life: Minimum 12 months to use by date. *Breakaway torque Nm ‡Tensile shear strength N/mm2

All except 510, 518, 542, 572, 577, 641, 620 and †Static shear strength N/mm2 Note: All strength ranges are based on mean ± 2σ valuesActivators have fluorescent dye for inspection purposes.

DEFENCE INDUSTRIES PRODUCTS

2

MOD

Page 3: Defence Industries Product Guide - Chemsol · Metal Set Steel or aluminium filled epoxy putty for Aluminium-H1 3475 repairing broken castings,worn fittings,etc. Steel 3463 Metal Magic

Colour - Typical SubmarineStore Code

Product No. Application/DescriptionTypical Viscosity Strength

SpecificationApproval

H1 - ARMY0425 - NAVY

350, 358UV rapid curing adhesives for bonding Clear Various, depends onglass-metals-glass, potting Various product and substrate

312Bonding metals, ceramics, glass etc. up Clear

14-27‡ AFS1100BH1

to 0.1mm gap. Use with Activator 734 1100cps 0425

317Bonding metals, ceramics, glass etc. up Clear

12-26‡ AFS1476C H1to 0.2mm gap. Use with Activator 734 3000cps

Bonding of metals, alloys, etc. whereClear/Amber

326 high impact strength is required.65000cps

15-30‡ AFS 1568A BLI 0425Use with Activator N or T

FLA

T F

AC

E B

ON

DIN

G A

DH

ES

IVE

SC

YAN

OA

CR

YLA

TE

S -

(E

) E

TH

YL

- (M

) M

ET

HY

L

Shelf life: Minimum 12 months to use by date, except *Breakaway torque Nm ‡Tensile shear strength N/mm2

cyanoacrylates which have 9 months to use by date †Static shear strength N/mm2 Note: All strength ranges are based on mean ± 2σ valuesand Tak Pak Kit which has 6 months to use by date.

DEFENCE INDUSTRIES PRODUCTS

3

MOD

330 + 7388 Bonding of metals, alloys, G.R.P. etc. whereClear/Amber

Multibond high impact strength is required & tolerant65000cps

15-30‡ AFS 1568A 0425Kit of surface contamination and gaps to 0.5mm

AC

RY

LIC

&A

NA

ER

OB

IC B

ON

DIN

G

401 For fast cure on acidic surfacesClear

18-26‡ BS7969110cps

406 (E)For difficult to bond plastics and rubbers Clear

18-26‡ BS7969 H1such as EPDM 20cps

407 (E)General bonding of rubbers and plastics Clear

16-26‡ AFS1959where heat ageing is expected 40cps

GEL cyanoacrylates for large gaps andClear

409/454 porous materials i.e. leather and fabricGel

18-26‡ BLI H1Also bonds rubber and plastic

415 (M) Fast bonding of metals and ceramics Clear20-30‡ BS7969

H1416 (E) and certain plastics up to 0.25mm gap 1350cps 0425

493 (M)Penetrating adhesives for post assembly Clear

15-26‡ BS7969 H1bonding of metals, plastics, etc. 3cps

422 (E)Fast bonding of rubbers, plastics, metals Clear

18-26‡ BS7969 H1with large gap filling capability up to 0.25mm 1200cps

480 (E)A black, tough, peel resistant adhesive for fast Black

22-30‡ BLI H1bonding. Ideal for dissimilar materials and rubbers 300cps

495 (E)General bonding of rubbers, plastics Clear

12-26‡ BS7969 H1up to 0.1mm gap 40cps

496 (M)Fast bonding of metals and ceramics and Clear

20-30‡ BS7969 BLIH1

certain plastics up to 0.1mm gap 110cps 0425

770Primer for bonding silicone rubber,

Clear - - H1Santoprene & polyolefin with CAs

7455 Tak Pak Activator Clear H1

Tak Pak Repairs and modifications to circuit boards,5000cps 18-26‡ H1

Kit 382 MSDS approved. Tamper proofing screws

8008 High performance Anti-Seize. Protects and Copper - MIL-A907D LI 0425

Anti-Seize C5A lubricates at temperatures up to 980°C

‘O’ Ring Kit For making up static ‘O’ Rings. Includes 406 Metric

- H1Imperial

Metal Set Steel or aluminium filled epoxy putty for Aluminium- H1

3475 repairing broken castings, worn fittings, etc. Steel

3463 Metal Magic Stick Kneadable Two Part Putty Dark Grey - - -

Page 4: Defence Industries Product Guide - Chemsol · Metal Set Steel or aluminium filled epoxy putty for Aluminium-H1 3475 repairing broken castings,worn fittings,etc. Steel 3463 Metal Magic

Product No. Description NATO Stock No. Size

MATERIAL HELD IN ARMY/RAF STORESVOCAB SECTION H1 Contract No. CP23C/6216

932 Very Low Strength Threadlocker 8030-99-224-9389 50ml

221 Low Strength Screw Lock 8030-99-224-8425 10ml

221 Low Strength Screw Lock 8030-12-160-0570 50ml

222 Low Strength Screw Lock (Lubricated) 8030-99-762-3278 50ml

225 Low Strength Screw Lock/Pipe Seal 8030-99-224-7305 50ml

241 Medium Strength Nut Lock 8030-99-224-8261 10ml

241 Medium Strength Nut Lock 8030-99-224-8992 50ml

242 Medium Strength Nut Lock (Lubricated) 8030-99-225-0248 50ml

243 Medium Strength Oil Tolerant AFS 1993 8030-99-834-1892 50ml

243 Medium Strength Oil Tolerant AFS 1993 8030-99-253-6699 250ml

245 Medium Strength Nut Lock (Coarse Threads) 8030-99-224-8993 50ml

270 Stud and Bearing Fit 8030-99-224-8707 10ml

270 Stud and Bearing Fit 8030-99-224-9318 50ml

275 Stud Lock (Coarse Threads) 8030-99-224-7304 50ml

290 Penetrating Lock and Seal 8030-99-224-8995 10ml

290 Penetrating Lock and Seal 8030-99-224-9317 50ml

312 Adhesive (Use with Activator F) 8040-99-224-8947 50ml

317 Adhesive (Use with Activator T or F) 8040-99-224-8998 50ml

330 Multibond Tough Acrylic Adhesive (Use with Activator 7386/7388) 8040-99-745-4691 50ml/40ml Kit

382 Tak Pak Kit for Wire Tacking 8040-99-852-8298 20g/25ml Kit

406 Fast Cure Ethyl Cyanoacrylate (Use with CFC Free 770 Primer for Polyolefins) 8040-99-729-3250 20g

415 Methyl Cyanoacrylate (Large Gaps) 8040-99-225-2342 20g

422 Ethyl Cyanoacrylate (Large Gaps) 8040-99-225-2348 20g

480 Tough, Black Cyanoacrylate 8040-99-301-2979 20g

493 Thin Methyl Cyanoacrylate 8040-99-224-9656 50g

495 General Purpose Ethyl Cyanoacrylate 8040-99-224-8503 50g

496 (IS12) General Purpose Methyl Cyanoacrylate 8040-99-224-6082 20g

496 (IS12) General Purpose Methyl Cyanoacrylate 8040-99-224-1393 100g

7455 Tak Pak Activator (Replaces 7025/7113) 8040-99-873-2291 150ml aerosol

770 Polyolefin Primer (For use on Polyolefin Surfaces) 8040-99-869-0549 10g

Kit ‘O’ Ring Kit (Includes Product 406/20g – NATO Stock No. 8040-99-729-3250) 5330-99-978-4778 Kit

510 High Temperature Gasketing 200°C 5330-99-748-9983 160ml

518 Flexible Gasketing (Especially Aluminium Surfaces) 8040-99-701-8040 50ml

542 Hydraulic Seal 8030-12-172-5459 50ml

566 Slow Cure Hydraulic Seal 8030-99-220-4153 50ml

572 Pipe Seal 8030-99-225-0249 50ml

573 Low Strength Gasketing 5330-99-225-2103 50ml

573 Low Strength Gasketing 5330-99-225-1979 250ml

574 General Purpose Gasketing 5330-99-225-3058 50ml

577 Pipe Seal Fast Cure 8030-99-257-3495 50ml

5900 Oil Resistant Silicone for Land Rover Sump etc. 8040-99-773-4080 50ml

5900 Oil Resistant Silicone for Land Rover Sump etc. 8030-01-487-5273 300ml

5922 Non Setting Flat Face Seal and Gasket Dresser 8030-12-360-2787 60ml

4

MOD

Page 5: Defence Industries Product Guide - Chemsol · Metal Set Steel or aluminium filled epoxy putty for Aluminium-H1 3475 repairing broken castings,worn fittings,etc. Steel 3463 Metal Magic

Product No. Description NATO Stock No. Size

MATERIAL HELD IN ARMY/RAF STORESVOCAB SECTION H1 Contract No. CP23C/6216

601 Retaining Compound 8040-99-224-8996 10ml

601 Retaining Compound 8040-99-224-9438 50ml

603 Oil Tolerant AFS 1957 Retaining Compound 8040-99-051-7332 50ml

620 High Temperature High Strength Threadlock & Bearing Fit 8040-99-225-4168 250ml

635 Retaining Compound High Strength AFS 1827A (Use with Activator T 7471) 8040-99-225-1312 50ml

638 Bearing Fit High Strength 8040-99-792-7208 50ml

640 Bearing Fit High Strength High Temperature AFS 1131B (Use with Activator T 7471) 8040-99-224-8622 50ml

641 Bearing Fit Medium Strength 8040-99-225-1152 50ml

648 Bearing Fit High Strength High Temperature 8040-99-225-1714 50ml

7031 Quick Clean (Cleaner for use with Cyanoacrylate Adhesives) 6810-99-517-1893 150ml aerosol

7061 General Purpose Aerosol Solvent Cleaner 6850-99-701-4574 10 x 400ml

7070 General Purpose Pump Spray Cleaner 6850-99-075-6660 400ml

7200 Foaming Gasket Remover 6850-99-225-6907 400ml

734 Activator F (Use with 317, 312) 8040-99-869-0546 150ml aerosol

7386 Activator for Multibond Tough Acrylic 8040-99-869-0545 500ml

7471 Activator T (To Speed Cure) 8040-99-869-0548 150ml aerosol

7649 Activator N (For Passive Surfaces) 8030-99-256-3436 150ml aerosol

595 RTV Silicone Black 8040-99-745-4691 50ml/40ml Kit

595 RTV Silicone White 8040-99-852-8298 20g/25ml Kit

Zinc Spray Teroson Zinc Spray 8040-99-729-3250 400ml

262 Bolt Lock High Strength Lubricated 8030-99-477-2334 250ml

2701 New Studlock 270 8030-01-525-3676 50ml

326 Adhesive (Toughened) Use Activator N for Fast Cure 8040-99-438-5637 50ml

330 Multibond 8030-99-205-8842 315ml

3475 Metal Set A1 Aluminium Epoxy Filler 8010-99-772-7344 500g

4062 Fast Superglue Low Viscosity (Replaces Loctite 420) 8040-99-840-1540 20g

407 High Temperature Cyanoacrylate AFS 1959 8040-99-783-1112 50g

409 Gel Superglue for Larger Gaps and Porous Material 8040-99-755-3164 20g

454 Gel Cyanoacrylate 8040-99-808-2532 50ml

510 High Temperature Gasketing 200°C 5330-99-841-9690 50ml

5203 Low Strength Gasket Eliminator 8030-99-927-7163 300ml

574 Multi Gasket 5330-99-789-4943 160ml

660 Quick Metal (Paste Bearing and Key Fit) 8040-99-788-2742 50ml

7063 General Purpose Cleaner & Degreaser 6850-12-506-7262 400ml

7400 Varnistop (Tamper Proofing) 5970-99-258-1260 20g

7840 Water Based Cleaner 750ml

7855 Paint & Resin Remover 8010-99-252-6081 750ml

8040 Freeze & Release for Removing Corroded Parts 400ml

8008 Copper Slip Anti-Seize (Brush in lid) 8030-01-456-3838 454g

5

MOD

ADDITIONAL PRODUCTS CODIFIED - NOT STOCKEDProduct No. Description NATO Stock No. Size

Page 6: Defence Industries Product Guide - Chemsol · Metal Set Steel or aluminium filled epoxy putty for Aluminium-H1 3475 repairing broken castings,worn fittings,etc. Steel 3463 Metal Magic

6

MOD

Product No. Uses NATO Stock No. Would replace

RECOMMENDED STOCK HOLDING

222 Low Strength Threadlocking for screws 8030-99-762-3278 221, 225

242/243 Medium Strength Threadlocking for nuts 8030-99-225-0248 241, 245

270 High Strength Threadlocking - Studlock 8030-99-224-9318

290 Low Viscosity for post assembly and sealing porosity 8030-99-224-9317

330 Multibond High Strength, multi-purpose for metal, glass etc. 8040-99-745-4691

406 Superglue - Use with ‘O’ Ring Kit and most plastics 8040-99-729-3250

‘O’ Ring Kit Instant ‘O’ Ring Making Kit - Contains 406 5330-99-978-4778

572 Large Pipework - Slow Cure 8030-99-225-0249

573 Low Strength Gasket Eliminator as used on Warrior Final Drive 5330-99-225-2103

574 Orange Flat Face Seal replaces Paper Gaskets 5330-99-225-3058

577 Pipe Seal - Fast Cure on Large Pipe Fittings 8030-99-257-3495

5900 Flexible Gasket Material - Oil Resistant 8030-01-487-5273

641 Bearing Fit when Removal is Required 8040-99-225-1152

648 High Strength Bearings and Studs for Permanent Fixturing 8040-99-225-1714 270

7061 Fast Evaporating Solvent Cleaner for all Parts Including Brakes 6850-99-701-4574

7070 Cleaner - Slow Evaporation for Highly Soiled Parts 6850-99-075-6660

7200 Gasket Remover 6850-99-225-6907

7840 Water Based Cleaner

7649 Activator for Passive Surfaces and Cold Weather Applications 8030-99-256-3436

Stock Where Necessary

409 Superglue Gel for Large Gaps and Porous Materials 8040-99-755-3164

542 Sealing Small Hydraulic Fittings 8030-99-224-8955

5922 Flexible Non-Curing Gasket Eliminator 8030-12-360-2787

595 RTV Silicone Black - General Purpose, Sealing Windscreens etc. 8030-99-250-9999

620 Flash Hider SA80 and High Temperature Bolt Locking 8040-99-225-4168

496

241 x 250ml 8030-99-225-1303 Use 50ml 8030-99-224-8992

270 x 250ml 8030-99-224-9319 Use 50ml 8030-99-224-9318

640 x 250ml 8040-99-225-0135 Use 50ml 8040-99-224-8622

648 x 250ml 8040-99-225-0136 Use 50ml 8040-99-225-1714

414 x 20g 8040-99-225-3827 Use 406 x 20g 8040-99-729-3250

420 x 20g 8040-99-995-8404 Use 4062 x 20g 8040-99-840-1540

424 x 20g 8040-99-225-3568 Use 406 x 20g 8040-99-729-3252

430 x 50g 8040-99-224-8504 Use 496 x 20g 8040-99-224-6082

7025 x 150ml 8040-99-869-0544 Use 7455 x 150ml 8040-99-873-2291

7113 x 150ml 8040-99-224-6428 Use 7455 x 150ml 8040-99-873-2291

PRODUCTS DELETED FROM NATO STORESDeleted Product NATO Stock No. Replacement Product NATO Stock No.

Page 7: Defence Industries Product Guide - Chemsol · Metal Set Steel or aluminium filled epoxy putty for Aluminium-H1 3475 repairing broken castings,worn fittings,etc. Steel 3463 Metal Magic

Typical GapGrade Typical Applications Viscosity (Cps)Strength Filling (mm)

Specification

582 (CVX)Medium strength, large gap filling threadlocking and

6,000 7-18* 0.5 AFS 1719Asealing. Requires Activator on passive surfaces

1886 High strength threadlocking, sealing and retaining 2,000/3,000 25-50* 0.4 AFS 1914

1878Medium strength threadlocking, sealing and retaining

10-15 5-16* 0.1 AFS 1914Low viscosity for post assembly

326High strength adhesive, sealant and threadlocker

10,000 12-25‡ 0.5 AFS 1740Ideal for dissimilar materials

932 Low strength threadlocking 125 1-4* 0.1 DTP 5629

EXPLOSIVE COMPATIBLE LOCTITE GRADES(Type tested by ETS Group QINETIQ - Fort Halstead)

Silicone Non corrosive white silicone sealant for bonding siliconePaste - 3.0 in 10 hours -

Low Odour and for general sealing

408High strength bonding, low viscosity for post assembly

3 14-22‡ 0.05 AFS 1915applications. Low bloom

409/454 High strength bonding and sealing with large gap filling Gel 18-26‡ 1.0 -

415 High strength bonding 1,500 20-30‡ 0.25 BS 7969

493High strength bonding, low viscosity for post assembly

3 15-26‡ 0.05 BS 7969applications

4105 Black, toughened cyanoacrylate 5,000 - 0.25 AFS 2275

770Pretreatment prior to bonding silicone rubber,

Liquid/Primer - - AFS 2292polyolefins etc. Use with cyanoacrylate adhesives

7471 General purpose for use with anaerobic adhesives Liquid/Activator - - AFS 2292

7649For passive surfaces when using anaerobic adhesives

Liquid/Activator - - -Also standard activator for 326

FMD 680 Replaces L0783 (18053) 10,000 - - -

The following table shows Loctite grades that have been tested with the given representative explosives and found to be compatible.This table is for guidance only.Before use in specific applications, advice and approval should be sought from ETS Group QINETIQ, Fort Halstead Tel: 015959 515020 who are theM.O.D. authority for materials compatibility with explosive.

1. INITIATORS(a) SILVER AZIDE -CVX, 326(b) LEAD AZIDE -CVX, 1878, 420, 932, Superflex(c) LEAD STYPHNATE & VH2 -CVX, 415, 493

2. GUNPOWDER -1878, Superflex, 380, 415, 496

3. TETRYL (CE) -415, Studlock, 408, 409, 420, 423, 496, Superflex, 770, (326, 327, 312 Cured Condition Only)

4. PROPELLANTS(a) Single, Double,, Triple -1878, 415, Studlock, 635, 574, 770, 326, 648(b) Composites -312, 317

5. COMBUSTIBLE CARTRIDGE CASES -401, 409, 454

6. EXPLOSIVES(a) RDX/TNT -(inc. PE4, EDC 1S, Debrix, EDC1A)

HMX/TNT CVX, 1886, 1878, 415, 932, Studlock, 312, 420, 327, 312, 326, 496, 408, 648, 661,357, 380, 409, 423, 493, 495, 496, Superflex, 222, 241, 401, 770

(b) RDX/AL -(inc. Torpex, RWA4, PE6 Alum) 401CVX, 1886, 1878, Studlock, 222, 326, 415, 495, 496, 635, Superflex, 932

(c) PETN -(inc. EDC 8)CVX, 326, 327, 380, 415, 420, 493

7. PYROTECHNICS Due to their wide and varied range specific advice should be sought

Due to the acidic value of some of the above grades, advice should be sought when using in direct contact with explosives. The nature of the application, whether in contact, close proximity or via vapour path, should always be discussed with D.R.A. for expert advice.

Source: ETS Group QINETIQ, Fort Halstead, Sevenoaks, Kent TN14 7BP. Tel: 01959 515020. Fax: 01959 516041 Nov. 1994NOTE: ALL THE ABOVE LOCTITE GRADES CAN BE DISPENSED THROUGH ‘ALL PNEUMATIC’ METERING AND DISPENSING EQUIPMENT

*Breakaway torque Nm ‡Tensile shear strength N/mm2 †Static shear strength N/mm2 Note: All strength ranges are based on mean ± 2σ values

7

MOD

Page 8: Defence Industries Product Guide - Chemsol · Metal Set Steel or aluminium filled epoxy putty for Aluminium-H1 3475 repairing broken castings,worn fittings,etc. Steel 3463 Metal Magic

Henkel Loctite Adhesives LimitedTechnologies House, Wood Lane End,Hemel Hempstead, Hertfordshire HP2 4RQTechnical Helpline Phone: 01442 278100Fax: 01442 278071E-mail: [email protected]

® designates a trademark of Henkel KGaA or its affiliates, registered in Germany and elsewhere. © Henkel Loctite Adhesives Limited, 2007.

The data contained herein are intended as reference only. Extensive testing with original parts is recommended before application. Any warranty claims shall be restricted to theprovisions of Loctite standard terms and conditions. Please refer to the product data sheet for further information.

Distributors:

M-TecUnit 3Craven CourtCanada RoadByfleetSurreyKT147JL

Tel: 01932 354100Fax: 01932 340200

Anixter3 Edmund RoadSheffieldS2 4EB

Tel: 0114 2751496Fax: 0114 2750162

Aeropia LtdAeropia HouseNewton RoadCrawleyWest SussexRH10 2TY

Tel: 01293 459500Fax: 01293 459600

Silmid2 Roman ParkRoman WayColeshillB46 1HG

Tel: 01675 432875Fax: 01675 432869

R. D. Taylor & Co. Ltd242 Edmiston DriveIbroxGlasgowG51 2YU

Tel: 0141 427 5103Fax: 0141 427 1881

Brammer LtdNDCHeadway Road(Off Wobaston Road)WolverhamptonWV10 6PZ

Tel: 01902 395000Fax: 01902 395988

Tom Parker (Hydraulics &Pneumatics) LtdMarsh Lane MillMarsh LanePrestonPR1 1HY

Tel: 01772 251405Fax: 01772 827088

WYKO IndustrialDistribution LtdAmber WayHalesowenWest MidlandsB62 8WG

Tel: 0121 508 6000Fax: 0121 508 6221

Loctite products are approved by MOD and CAA and can be released to DTD and AFSspecifications from Loctite AQAP4, BS5750, ISO9002 or approved BSI distributors