decorative panels

Download Decorative panels

Post on 15-Apr-2017

178 views

Category:

Education

0 download

Embed Size (px)

TRANSCRIPT

Decorative panels

Market study:Decorative panelsAnurag Rathi BA13ARC007Barsha A. BA13ARC009

Wood composites

Type: Hard MaterialElements: MDF and WPC

Medium density fibreboard (mdf)An engineered wood-based sheet material made by bonding together wood fibres with a synthetic resin adhesive.

Fabrication Laser Cut Panels are manufactured by laser cutting either manually or through machines. The textured 3D panels are computer designed so that carved & sculpted designs flow seamlessly from one panel to the next.

Market formMDF is available in three main types: 1. Plain wood boards.2. Laser cut jalis.3. Textured 3D wall panels.Wood sheets in a variety of widths and lengths. Standard sizes include 8x6, 8x4, 7x6, 7x4 and 6x4.MDF is available in a wide range of thickness based upon its application. The standard thicknesses are 4mm, 6mm, 8mm, 10mm, 12mm, 15mm, 18mm, 25mm, 30mm and 35mm.

Laser cut sheets

Textured 3d panels

installation MDF panels are preferably glued rather than nailed unto the surface.The surface for application is cleaned of dust and treatment against moisture is carried on. Thereafter, the MDF panel is applied with a layer of glue (araldite or strong fevi-bond) and is adhered upon the surface. MDF can be permanently fixed by nailing or screwing. Bullet head nails can be punched below the surface of MDF where a painted finish is required. Finishes can be applied thereafter. In most cases, MDF panels have a finished surface right from the store. In case MDF is applied to windows, or doors, the MDF panel is sandwiched between two glass panels.

treatmentsMDF can be manufactured with fungicide additives or have a brush on post treatment preservative to protect against surface moulds under damp conditions.Surface treatments can be used to protect against water and dirt, however it is important to check with each manufacturer as to the suitability and/or recommended products.Paint can also be considered a surface protection.Any cracks and holes in the panel is filled with putty containing dico.

Applications

Laser Cut Screens

MDF partitions

solid walls cladding

doors and windows

luminaries

furniture

Live case study: Khandelwals, flat 402, Hare Krishna Apartments

ApplicationsTextured 3D panels

Full wall panelling

partial panelling

ceiling

Furniture elements

ApplicationsMDF Boards

Sculpturing

Defects in MDF led to the invention of a new material called WPC.

Reasons for invention of wpcMDFMDF does NOT tolerate water well. Water begins to degrade MDF into fine particles and hence only used in interiors.

When MDF is cut, sanded, shaped or machined in any way, it releases clouds of dust particles coated with formaldehyde. The particles, much smaller than those emitted by most other commonly used woods, can be inhaled deep into the lungs. formaldehyde is a recognised carcinogen.

WPC WPC panels were fabricated to resist moisture and weathering due to water contact. Also it was made termite and pest proof and fire retardant.

Ligno-cellulosic and/or inorganic filler materials for adhesion and thus are part of natural fiber plastic composites. Thus they are environment friendly, non-toxic and not a health hazard.

Wood plastic compositeComposite materialsmade ofwood fiber/wood flourand thermoplastics (includesPE,PP,PVC etc.)Chemical additives seem practically "invisible" (except mineral fillers and pigments, if added) in the composite structure.

Advantages of wpcTermite and Pest ProofWater ProofHigh Screw & Nail Holding CapacityFire RetardantEasy InstallationSmooth SurfaceDiverse ApplicationsImpact ResistantEnvironment FriendlyWeather & Ageing Resistant

Market formsWPC BoardsWPC Laser cut sheetsWPC columnar members

brochures

ApplicationsWall Cladding

installation

WPC board cladding

Wpc column element cladding

WPC Laser cut sheet cladding

Applications

Decking

Installation

ApplicationsLandscape Elements

pergolas

walkways

Miscellaneous Elements

Material of futureIndustrial logging of the worlds primary forests is rapidly destroying the habitats of thousands of animal and plant species, and depleting our planet of its oxygen reserves. We need to call a halt to the destructive exploitation of hardwoods responsible for this widespread deforestation. Solutions to the problem do exist.WOOD POLYMER COMPOSITEThis new material had the appearance and qualities of the rarest species of wood while offering a truly eco-friendly alternative, and met with instant success. The extremely demanding Indian market was won over by the quality and exceptional lifespan of this product, which followed the tradition of, respect for, and love of, nature. Wood Plastic Composite material is widely available today in India ,where it holds a Majormarket share in architectural landscaping in the public and private construction sectors.

Recommended

View more >