decoflood - amazon web servicessignify-documents.s3-eu-west-1.amazonaws.com/archive/widelite...

DecofloodDFS1 Mini-Spot - 22-39W HID

of 8

FeaturesOptical System / Available Distributions

NB Narrow Beam MB Medium Beam WB Wide Beam See optical data for details.

Housing / Construction Die-cast aluminum housing. Optic chamber constructed to IP65.

Lamp / Socket DFS1 utilizes Philips Mini MasterColor ceramic metal halide CDM-Tm lamps with PGJ5 base. CCT: 3000 K. See distribution guide for details.

Ballast / VoltageThe electronic ballast shall operate from a nominal line voltage of 120V, +/- 10%, 50/60 Hz. Input current total harmonic distortion (THD) < 15%. Power factor > 90%. Lamp end-of-life detection and shutdown circuit. Sound rated A. Output frequency to the lamps < 200 Hz to prevent acoustic resonance inside the lamp arc tube to minimize visible flicker. Lamp current crest factor < 1.5. Ballast is thermally protected to shut off when operating temperatures reach unacceptable levels. Furnished with integral, colour-coded leads. Maximum rated case temperature 90°C (194°F).Maximum lamp to ballast distance: 6 ft (2 m). See distribution guide for details.

Style SV Swivel Attached Box (anchors by others)SVRB Swivel Remote Box (anchors by others)

MountingPL Plate Mount (anchors by others) SM Surface Mount (to 4” J-box by others) (anchors by others)

Options (pre-attached)Internal Shielding: Internal Half Round Louver ‘HRL’ and Internal Full Round Louver ‘RL’ options are available. (Shielding is black unless otherwise specified). External Shielding: Stone guard ‘SG’ option available.

Lens Options Lens options includes a pre-attached lens holder that can hold up to two lenses.

Spread Lenses: C Beam Softener D Beam Spreader Horizontal E Beam Spreader Vertical

Job Information Type:Job Name:

Cat. No.:

Lamp(s):

Notes:

Canlyte3015 Louis-Amos, Lachine, Québec H8T 1C4 e: [email protected] t: (514) 636-0670 w: www.canlyte.com

Colour Lenses: F Solgel Blue Filter H Solgel Light Blue Filter I Solgel Yellow Filter J Solgel Green Filter K Solgel Magenta Filter M Red Filter

Colour Temp Lenses: N Warm n°1 Solgel Filter O Warm n°2 Solgel Filter P Warm n°3 Solgel Filter Q Cool n°2 Solgel Filter U Cool n°3 Solgel Filter V Cool n°4 Solgel Filter

DFS1-SV

DFS1-SVRB

Some luminaires use fluorescent or high intensity discharge (HID) lamps that contain small amounts of mercury. Such lamps are labeled ‘Contain Mercury’ and/or with the symbol ‘Hg’. Lamps that contain mercury must be disposed of in accordance with local requirements. Information regarding lamp recycle and disposal can be found at www.lamprecycle.org.

Hg

Job Information Type:

Finish Luminaire Finish Accessory Finish DescriptionS TWO Two-Tone (dark gray, silver) B TBK Textured Black R TDB Textured Dark Bronze A TSA Textured Satin Aluminum W TWHT Textured White G TGN Textured Green T TGR Textured Grey

Accessories (ordered separately)External Shielding: Glare shield (visor) ‘GS-DFS1’ accessory available in black

Aiming (when mounted to horizontal surface) DFS1 can be aimed 67.5° up or 67.5° down. See Aiming Diagrams.


of 8

Dimensions

DFS1-SV-PL DFS1-SV-SM

4.11” (10.44 cm)

14.25” (36.20 cm)13.71” (34.82 cm)

9.49” (29.10 cm)

12.10” (30.73 cm)

4.50” (11.43 cm)

0.28” dia. (7.11 mm)

(3X) mounting holes

2.12” (5.38 cm)

5.25” (13.33 cm)

4.45” (11.3 cm)

5.0” (12.7 cm)5.0”

(12.7 cm)8.25”

(20.96 cm)1.10”

(2.79 cm)

2.25” (5.72 cm)'SM' Surface Mount includes

thru-wire provision when mounting to standard recessed 4" square or

octagonal j-box (by others)

Mounts to standard

recessed 4" square or

octagonal J-box (by others)

4.11” (10.44 cm)

14.25” (36.20 cm)13.71” (34.82 cm)

9.49” (29.10 cm)

12.10” (30.73 cm)

4.50” (11.43 cm)

2.12” (5.38 cm)

5.25” (13.33 cm)

4.45” (11.3 cm)

5.0” (12.7 cm)

4.75” (12.07 cm)3.5” (8.89 cm)

Weight:9.0 lbs (4.08 kgs)

EPA (sq ft):0.5

For Reference Only

Canlyte 3015 Louis-Amos, Lachine, Québec H8T 1C4 e: [email protected] t: (514) 636-0670 w: www.canlyte.com

Listings cETLus Listed luminaire, to be, suitable for Wet Locations. The quality systems of this facility have been registered by UL to the ISO 9001 Series Standards.

Warranty / Terms and Conditions Standard 5 Year Limited Warranty.



of 8

SGFBLSGFLBSGFYE

WAF1WAF2WAF3

SGFGNSGFMG

FRD

COF2COF3COF4

Dimensions

DecoFlood Mini-Spot DFS1 Order Form

Philips Wide-Lite Professional Luminaires reserves the right to change specifi cations and dimensions without notice. Lamp and electrical specifi cations / availability subject to change by manufacturer without notice. Please refer to detailed specifi cation sheets for additional information and spec details.1611 Clovis Barker Road • San Marcos, TX 78666 • Phone: 512.392.5821 • Fax: 512.753.1122 • www.wide-lite.com© 2011 Philips Group Bulletin No. WLSP0334A0211

DFS1-SV-PL DFS1-SV-SM

HRL Half Round Louver

RL Full Round Louver

SG Stone Guard (poly)

Ordering Information (lamps are not included and must be ordered separately, contact factory for assistance if required)

Style

SV Swivel Attached Box (anchors by others)

SVRB Swivel Remote Box (anchors by others)

Luminaire Finish

S Two-Tone (dark gray, silver)

B Textured Black R Textured Dark Bronze A Textured Satin Aluminum W Textured White G Textured Green T Textured Grey

1 120V P22

P39

DFS1

Ballast

E Electronic

VoltageDistribution

NB Narrow Beam

MB Medium Beam

WB Wide Beam

Mounting

PL Plate Mount (anchors by others)

SM Surface Mount (to 4” J-Box by others) (anchors by others)

SourceSeries

Lens Options (includes lens holder, holds up to two lenses)

C Beam Softener D Beam Spreader Horizontal E Beam Spreader Vertical

F Solgel Blue Filter H Solgel Light Blue Filter I Solgel Yellow Filter J Solgel Green Filter K Solgel Magenta Filter M Red Filter

Accessories (must be ordered separately)

GS-DFS1 Glare Shield (visor) N Warm n°1 Solgel Filter O Warm n°2 Solgel Filter P Warm n°3 Solgel Filter Q Cool n°2 Solgel Filter U Cool n°3 Solgel Filter V Cool n°4 Solgel Filter

Mini MasterColor (CMH Pulse Start)

Mini MasterColor

Color Temp Lenses1

Color Lenses1

Spread Lenses1

DFS1P22DFS1P39

HRLRL

SG

TWOTBKTDBTSA

TWHTTGNTGR

RAL(*)

PLSM

SVSVRB

120ENBMBWB

Notes: 1. Lens options include lens holder that can hold up to two lenses. Lens holder comes pre-attached to the fixture. Photometry for the ‘BSO’ lens should be used for reference only. Lens performance can vary slightly due to manufacturing tolerances.

- --- - ---Series/Source-Wattage Distribution Ballast Voltage Style Mounting Lens Options Finish AccessoriesOptions

GS-DFS1Internal Shielding

External Shielding

OptionsInternal Shielding (pre-installed)

External Shielding (pre-attached)

External Shielding (shielding is black unless otherwise specified)

BSOHLBSPVLBSP

Spread Lenses1

Colour Lenses1

Colour Temp Lenses1

See optical data tables for specific beam and candela information.

E 120

4.11” (10.44 cm)

14.25” (36.20 cm)13.71” (34.82 cm)

9.49” (29.10 cm)

12.10” (30.73 cm)

4.50” (11.43 cm)

0.28” dia. (7.11 mm)

(3X) mounting holes

2.12” (5.38 cm)

5.25” (13.33 cm)

4.45” (11.3 cm)

5.0” (12.7 cm)5.0”

(12.7 cm)8.25”

(20.96 cm)1.10”

(2.79 cm)

2.25” (5.72 cm)'SM' Surface Mount includes

thru-wire provision when mounting to standard recessed 4" square or


Mounts to standard



4.11” (10.44 cm)

14.25” (36.20 cm)13.71” (34.82 cm)

9.49” (29.10 cm)

12.10” (30.73 cm)

4.50” (11.43 cm)

2.12” (5.38 cm)

5.25” (13.33 cm)

4.45” (11.3 cm)

5.0” (12.7 cm)

4.75” (12.07 cm)3.5” (8.89 cm)

Mini MasterColorSeries/Source-Wattage

Lamp 2/ Base

Axial orientationBallast Type ANSI Code Initial Lamp

LumensRated Life

(hrs)Line Current

120 VLine Watts

DFS1P22 T3.5 / PGJ5 Electronic C175/E 1,650 12,000 0.23 26

DFS1P39 T3.5 / PGJ5 Electronic C179/E 3,000 12,000 0.40 45

Notes1) Photometry available online. 2) Mini MasterColor CMH lamps ordering code:

22W: CDM20/TM/830 (CDM-Tm 20W/830) with CCT of 3000 K and CRI of 85, 39W: CDM35/TM/930 (CDM-Tm 35W/930) with CCT of 3000 K and CRI of 90. (Lamp envelope BT5 has been replaced with T3.5)

Distribution Guide and Ballast Data 1

Ordering informationExplanation of catalog number: Example: DFS1P22NBE1SVPLB

EDFS1 1

Series Source Distribution Ballast Voltage Style(mounting)

Options Lens Option(s) LuminaireFinish




of 8

Optical Data

Aiming Diagrams (when mounted to a horizontal surface)

67.5º

0º

67.5º

0º

DFS1

Cat No. OpticInitial Lamp

Lumens

MaxCD

50%Main Beam

(hor.)

50%Main Beam

(vert.)

10%Field Beam

(hor.)

10%Field Beam

(vert.)

NEMABeam

(hor.)

NEMABeam(vert.)

LampType Base Lamp

Axis IES File #

DFS1P22 NB 1,650 34,658 6.6° 6.6° 17.1° 17.1° 1H 1V T3.5 PGJ5 Axial DFS1P-22-NB.IES

MB 1,650 8,097 16.0° 16.0° 35.9° 35.9° 3H 3V T3.5 PGJ5 Axial DFS1P-22-MB.IES

WB 1,650 3,736 22.0° 22.0° 58.0° 58.0° 4H 4V T3.5 PGJ5 Axial DFS1P-22-WB.IES

DFS1P39 NB 3,000 63,014 6.6° 6.6° 17.1° 17.1° 1H 1V T3.5 PGJ5 Axial DFS1P-39-NB.IES

MB 3,000 14,721 16.0° 16.0° 35.9° 35.9° 3H 3V T3.5 PGJ5 Axial DFS1P-39-MB.IES

WB 3,000 6,793 22.0° 22.0° 58.0° 58.0° 4H 4V T3.5 PGJ5 Axial DFS1P-39-WB.IES

Mini MasterColor (CMH Pulse Start)


DFS1-SV-PL DFS1 Decoflood Mini-Spot

‘SV’ Swivel attached box

‘PL’ Plate mount

DFS1-SV-SM DFS1 Decoflood Mini-Spot

‘SV’ Swivel attached box

‘SM’ Surface mount

4.11” (10.44 cm)

5.25” (13.33 cm)

14.25” (36.20 cm)13.71” (34.82 cm)

5.0” (12.7 cm)4.45” (11.3 cm)

9.49” (29.10 cm)

12.10” (30.73 cm)

4.50” (11.43 cm)

2.25” (5.72 cm)

2.12” (5.38 cm)

0.28” dia. (7.11 mm)

(3X) mounting

holes

5.0” (12.7 cm) 8.25” (20.96 cm)

1.10” (2.79 cm)

4.11” (10.44 cm)

14.25” (36.20 cm)

13.71” (34.82 cm)

9.49” (29.10 cm)

12.10” (30.73 cm)

4.50” (11.43 cm)

2.12” (5.38 cm)

5.0” (12.7 cm)4.45” (11.3 cm)

5.25” (13.33 cm)

4.75” (12.07 cm)

3.5” (8.89 cm)

'SM' Surface Mount includes thru-wire provision when mounting to standard recessed 4" square or


Mounts to standard



Style and Mounting Details



of 8




of 8

DFS1-SVRB-PL DFS1 Decoflood Mini-Spot

‘SVRB’ Swivel remote box

‘PL’ Plate mount

DFS1-SVRB-SM DFS1 Decoflood Mini-Spot

‘SVRB’ Swivel remote box

‘SM’ Surface mount

11.40” (28.96 cm) 9.13”

(23.19 cm)

3.80” (9.65 cm)

9.14” (23.22 cm)

7.0” (7.78 cm)0.25” dia.

(6.35 mm) (4X) mounting holes

3.50” (8.89 cm)

1.42” (3.61 cm)

5.25” (13.33 cm)

4.45” (11.3 cm)4.45” (11.3 cm) 4.45” (11.3 cm)

4.11” (10.44 cm)

3.25” (8.26 cm)

3.25” (8.26 cm)

0.25” dia. (6.35 mm) (4X) mounting holes

1.80” (4.57 cm)

'SM' Surface Mount includes

thru-wire provision when

mounting to standard



'SM' Surface Mount includes

thru-wire provision when

mounting to standard


octagonal j-box (by others)4.75”

(12.07 cm)

3.5” (8.89 cm)

4.75” (12.07 cm)

3.5” (8.89 cm)

5.38” (13.67 cm)5.22” (13.26 cm)

9.20” (23.39 cm)

2.12” (5.38 cm) Mounts to

standard recessed 4" square

or octagonal J-box (by others)

5.22” (13.26 cm)

1.83” (4.65 cm)

1.42” (3.61 cm)

9.18” (23.32 cm)

5.25” (13.33 cm)

5.0” (12.7 cm)4.45” (11.3 cm)

4.11” (10.44 cm)

11.81” (30.0 cm)

4.21” (10.69 cm)

Style and Mounting Details (continued)




of 8

External Shielding option Pre-attached

SG Stone Guard (poly) (shiped installed with external lens holder)

Internal Shielding options Pre-attached

HRL Internal Half Round Louver (shiped installed)

RL Internal Full Round Louver (shiped installed)

Spread Lenses May be combined with a colour or colour temp lens. Beam images are for reference only.

Clear Glass(standard) beam is unchanged

C Beam Softener softens beam in both directions

D Beam Spreader Horizontal unidirectional horizontal beam spreader

E Beam Spreader Vertical unidirectional vertical beam spreader

1.5” (3.81 cm)

External Lens Holder (included with any lens option or stone guard option) (shiped installed)

1.5” (3.81 cm)

Option Details (factory installed)

Lens Option Details (Includes factory installed lens holder that can hold up to two lenses, or one lens option and the stone guard option.)

Helps to limit glare and spill light in all directions

Helps to limit glare and spill light in one direction


Colour Lenses

F Solgel Blue Filter Lee/Rosco equivalent: Medium blue 132

H Solgel Light Blue Filter Lee/Rosco equivalent: Marine blue 131

I Solgel Yellow Filter Lee/Rosco equivalent: Yellow 101

J Solgel Green Filter Lee/Rosco equivalent: Primary green 139

K Solgel Magenta Filter Lee/Rosco equivalent: Calcolor Pink 4890

M Red Filter Lee equivalent: Fire 019

Colour Temp Lenses installed approx. resulting lamp CCT % change CCT (no filter) with filter with filter

N Warm n°1 Solgel Filter 3000 K -23.3% 2300 K

O Warm n°2 Solgel Filter 3000 K -16.7% 2500 K

P Warm n°3 Solgel Filter 3000 K -10.0% 2700 K

Q Cool n°2 Solgel Filter 3000 K +26.7% 3800 K

U Cool n°3 Solgel Filter 3000 K +16.7% 3500 K

V Cool n°4 Solgel Filter 3000 K +10.0% 3300 K

Colour Temp Lenses are used to adjust the colour temperature of the existing lamp to a warmer or cooler CCT depending on the surface to be illuminated. Approximate percentage change in CCT (warmer or cooler) with filter is shown. Results can vary by lamp type, source. and optical distribution.

Job Information Type:Canlyte 3015 Louis-Amos, Lachine, Québec H8T 1C4 e: [email protected] t: (514) 636-0670 w: www.canlyte.comDFS1 September 26, 2011Specifications are subject to change without notice. © Koninklijke Philips Electronics N.V., 2011. All rights reserved.


of 8

GS-DFS1 Glare Shield (visor)

4.45” (12.45 cm)

External Shielding Accessory Details (black unless otherwise specified) (must be ordered separately) (beam images are for reference only)

Helps to increase visual comfort from certain viewing angles without impairing the main distribution.

decoflood - amazon web servicessignify-documents.s3-eu-west-1.amazonaws.com/archive/widelite...

Documents