deckel maho dmc 125 u hi-dyn - maschinen-kistner.de · model ; dmc 125 u hi-dyn . manufacture year...
TRANSCRIPT
KISTNER GmbH & Co. KG | Industriestraße 7 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de
DECKEL MAHO DMC 125 U hi-dyn
5 sides universal machining center
Manufacturer DECKEL MAHO Model DMC 125 U hi-dyn Manufacture year 2002 Control HEIDENHAIN iTNC 530 Machine number 11210001033 Travels X - 1.250 mm / Y - 880 mm / Z - 800 mm NC rotary table with pallet changer / 4 pallets
LINK to the machine
2 - DECKEL MAHO DMC 125 U hi-dyn
EQUIPMENT
Autom. swivel milling head autom. conversion from vertical to horizontal machining
4th axis swivelling range 360 x 0,001 degree
NC rotary table with pallet changer
4 pallets with hole pattern 1.000 x 800 mm
Turning speed max. 4th axis 10,3 1/min
Production package 40 bar / 23 l/min
Internal cooling through the spindle middle (AD), capacity of the coolant tank approx. 900 l
Tool magazine, chain 120 places
Direct measuring system
Centering bore 50 H6 mm
Permissible table load (table center) 1.500 kg
Clamping grid: 100 x 100, M 16 mm
Chip conveyor (rake conveyor)
Motor spindle 18.000 1/min
Drive type AC
Tool holder HSK-A63 according to DIN 69893
Electronic hand wheel
Full protection cabin
Probe HEIDENHAIN infrared TS 631
Oil / emulsion mist separator
Tool breakage detection
Tool measurement in the workspace, Blum Laser
Cone cleaning for tool holders
Mode 4, extended manual intervention
Rinsing gun with pump 1 bar / 40 l/min
Cooling device blowing air through spindle center
Coolant temperature control, heat and cool
User manual / Documentation / Machine parameters
TECHNICAL DATA
Working area X-axis 1.250 mm
Y-axis 880 mm
Z-axis 800 mm
Feed drive AC brake motors for axis X,Y,Z
Feed speed (X,Y,Z), stepless programmable 20 – 10.000 mm/min
Rapid traverse (X,Y,Z) 40 m/min
Set-up mode (X,Y,Z) 20 – 2.000 mm/min
Measuring system Resolution (X,Y,Z) 0,001 mm
Working spindle HSK
Tool holder cone hollow shaft HSK-A63 DIN 69893
Tool clamping hydraulic/mechanical
3 - DECKEL MAHO DMC 125 U hi-dyn
Tool changer with magazine Magazine places 120
Max. tool-Ø (with occupancy of all seats) 80 mm
Max. tool-Ø (with free adjacent places) 160 mm
Max. tool length from spindle nose
- with tool breakage monitoring 380 mm
Max. tool weight, with automatic tool changer 10 kg Pallet changer Number of the pallets 2
Permissible load of the pallet changer
- unilateral (Bild 1) 1.000 kg
- two-sided (Bild 2) Weight difference between the pallets must not exceed the value of 1,000 kg
Main drive
Motor spindle without gear
Speed, stepless programmable 20 – 18.000 min-1
in set-up mode 20 – 800 min-1
4 - DECKEL MAHO DMC 125 U hi-dyn
Working table, NC rotary table Clamping surface, pallet 800 x 1.000 mm
Centering bore Ø 50 H6 20 deep mm
Max. torque 2.765 Nm
Holding torque of the table top at:
- 100% 2.461 Nm
- 60% 3.026 Nm
- 40% 3.709 Nm
- 25% 4.618 Nm
Max. rotation of the table plate 10,3 rpm
Feed 3.600°/min
Resolution of the measuring system 0,001°
5 - DECKEL MAHO DMC 125 U hi-dyn
Magazine assignment HSK-A63
6 - DECKEL MAHO DMC 125 U hi-dyn
Tool limit dimensions with automatic tool change
7 - DECKEL MAHO DMC 125 U hi-dyn
MACHINE PICTURES
8 - DECKEL MAHO DMC 125 U hi-dyn
9 - DECKEL MAHO DMC 125 U hi-dyn
WORKING AREA DIMENSIONS
10 - DECKEL MAHO DMC 125 U hi-dyn
FLOOR PLAN
11 - DECKEL MAHO DMC 125 U hi-dyn
FOUNDATION PLAN
12 - DECKEL MAHO DMC 125 U hi-dyn
ARRANGMENT of MACHINE SUPPORT
13 - DECKEL MAHO DMC 125 U hi-dyn
*We do not guarantee the accuracy and completeness of these documents. We further do not assure any characteristics and qualities. The named machine, which is up for sale, is used.*
Thank you very much for your interest
KISTNER GmbH & Co. KG | Industriestrasse 7 95349 Thurnau | +49 92289870 | www.maschinen-kistner.de
LINK to the machine