decision support system example date: may 15 , 2020
TRANSCRIPT
Decision Support System Example
Date: May 15th, 2020
Disclaimer: The views represented in this document only reflect the views of the authors and not the views of Innovation & Networks Executive Agency (INEA) and
the European Commission. INEA and the European Commission are not liable for any use that may be made of the information contained in this document.
Furthermore, the information are provided “as is” and no guarantee or warranty is given that the information fit for any particular purpose. The user of the
information uses it as its sole risk and liability
This project has received funding from the European Union’s Horizon 2020 research and innovation programme
under grant agreement No 770064
Acronyms, definitions and references
The following acronyms are considered:• SO (resp., SOs): Strategic Objective (resp., Strategic Objectives)• TO (resp., TOs): Tactical Objective (resp., Tactical Objectives)• MS (resp., MSs): Measure (resp., Measures)• Score: relevance given by the user to a SO
The list and meaning of SOs, TO, and MS are available the Deliverable 1.5
Scope and Outline
The aim of these slides is to provide an example of the DSS interrogation.Two examples are reported:1. Given a set of Strategic Obectives, find the list of
measures that address them at the best2. Given a set of Measures, find the list of Strategic
Objectives that can be addressed by them and the projects developing them
General overivew of the DSS tool
DSS v1.0 structure
DSS strucure
The DSS is developed in Visual Basic and consits of an Excell workbook articulated in three worksheet:
1. Worksheet Guidelines: this worksheet provides basic intructions
2. Worksheet SO_to_MS: this worksheet provides a list of MSs that addressed a list of SOs choosen by the user
3. Worksheet MS_to_SO: this worksheet provides a list of SOs that can be addressed by a list of MSs choosen by the user
NOTE: The DSS should be opened in only-read mode to avoid errors when saving
Worksheet SO_to_MS
DSS v1.0
Step 1: Select the SOs and the relevant scores
First SO
Second SO
Third SO
Score of the first SO
Score of the second SO
Score of the third SO
NOTE: It is possible to choose a single SO. In this case it must be the first
Step 2: Press MS->SO and get the MS list
MS->SO
List of MSs
NOTE: The different colours indicate the MS’s category. MS are ranked by decreasing relevance.
Step 3: Select a MS and press EXPAND MEASURE
EXPAND MEASURE
Selected MS
List of projects/initiatives that developed the selected MS. The list is ranked by relevance of the project
Step 4: Select a Project and press EXPAND PROJECT
EXPAND PROJECT
Selected project
Selected project details
Selected MS
Worksheet MS_to_SO
DSS v1.0
Step 1: Select the MSs
First MS
Second MS
Third MS
NOTE: It is possible to choose a single MS. In this case it must be the first
Step 2: Press MS->SO and get the SOs and Projects lists
List of MSsMS->SO The different coloursindicate the SO’s category. SO are ranked by decreasing relevance.
This table shows which MS addresses a SO
This table shows which MS is developed in a project
List of projects
Step 3: Select a SO and press EXPAND SO
EXPAND SO
Selected SO
The result is shown in the worksheet SO_to_MS
Step 4: Select a Project and press EXPAND PROJECT
Selected project
Selected project details
EXPAND PROJECT
Unige TeamUniversity of [email protected]@[email protected] | www.docksthefuture.eu@ | [email protected] (Project Coordinator)@ | [email protected] | www.onthemosway.eu
@DocksTheFuture
Docks The Future
Docks The Future