decision on accreditation - stri high voltage testing · testing iso/iec 17025 abb ab stri...

Date Reference

2018-08-22 2017/3070

1 (2)

Swedac Head Office Stockholm Office Tel: +46 771 99 09 00, www.swedac.se Postal Address: Box 878, SE-501 15 Borås Postal Address: Box 15045, SE-167 15 Bromma E-mail: [email protected] Visiting Address: Österlånggatan 5 Visiting Address: Gustavslundsvägen 151 E, Plan 8 Organisation No: 202100-3815 Fax: +46 33 10 13 92 Fax: +46 33 10 13 92

Industry division Ann-Louise Skoglund Direktnr: +46 33 177706 E-post: [email protected]

ABB AB STRI - 771 32 Ludvika

Decision on accreditation (3 appendices) Decision Swedish Board for Accreditation and Conformity Assessment (Swedac) accredits ABB AB (registration number 556029-7029) as testing laboratory for electric testing and calibration. The scope of accreditation is specified in appendix 2. ABB AB will use the accreditation number 1297. The accreditation is valid until further notice. Flexible scope of accreditation ABB AB shall always keep an updated list of methods used within its accreditation. For the upcoming assessments you shall provide Swedac a list of changes introduced since the latest assessment. Flexible scope of accreditation implies that the laboratory within its accreditation, without applying to Swedac, may do changes in all ready accredited methods as follows: - Introduce new properties, variables, analysis or range of measurement within an existing accredited method - Introduce new methods within a specified area - Introduce new products/new test types within an existing accredited method - Introduce new versions of standard methods The changes introduced by flexible scope accreditation should not imply new measurement principles, new accreditation or technical areas than those already existing in the accreditation decision. Additional constraints are as follows: Flexibles scope of accreditation is only valid for testing. The calibration laboratory has fixed scope, and is not included in flexible scope of accreditation. Applicable provisions The provisions used in Swedacs accreditation process and which are applicable to activities are set out in appendix 1.

Date Reference

2018-08-22 2017/3070

2 (2)

Reason for decision ABB AB has applied for accreditation as testing laboratory. Swedac assesses that the requirements are fulfilled for accreditation for the scope set out in the application and which was reviewed during the assessment. Information The scope of accreditation is specified in appendix 2. Application for changed scope, except to the flexible accreditation, must be made to Swedac. Regular surveillance visit will be performed as described in the applicable regulations on accreditation. Accredited laboratories pay an annual fee in accordance with Swedac’s regulations. The organisation carry out accredited activities at the following site/sites: See appendix 2

This decision has been made by Division Manager Tomas Holm in consultation with the Technical Officer Per Fällström. Tomas Holm Appendices 1. Applicable provisions 2. Scope of accreditation Accreditation certificate Please notice that this is a translation, in case of any discrepancies between the English version and the original Swedish version the latter will prevail.

Appendix 1 Date Reference

2018-08-22 2017/3070

1 (1)

Applicable provisions EU legislation and national legislation

Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93 Act (SFS 2011:791) concerning Accreditation and Conformity Assessment Ordinance (2011:811) concerning Accreditation and Conformity Assessment STAFS 2011:33 Swedac´s Regulations and General Guidelines for the Accreditation of Laboratories STAFS 2015:8 Swedac´s Regulations and General Guidelines (STAFS 2015:8) on Accreditation STAFS 2011:33 includes all requirements in SS-EN ISO/IEC 17025:2005

1 (1)

ACCREDITATION CERTIFICATE

Ackred. nr. 1297 Testing

ISO/IEC 17025

ABB AB STRI

Registration number 556029-7029

is accredited as a testing laboratory for the scope specified in appendix 2. The applicable terms of the accreditation are specified in appendix 1.

This laboratory is accredited in accordance with the International Standard ISO/IEC 17025:2005. This

accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system. The accredited laboratory is responsible for the results of performed testing and

submitted judgements as well as, where applicable, for the selection and application of work methods within the scope of the granted accreditation.

The accreditation is valid until further notice. The Swedish Board for Accreditation and Conformity Assessment (Swedac) regularly carries out surveillance, and a full reassessment every fourth year, in order to verify that the

applicable terms of accreditation, see appendix 1, are continually fulfilled.

This accreditation certificate was issued 2018-08-22 by Tomas Holm,

Manager of the Industry division

Accreditation was granted in accordance with article 5 (1) or Regulation (EC) No 765/2008 regarding accreditation and market surveillance etc. and the Act (SFS 2011:791) concerning Accreditation and Conformity Assessment. Swedac is the national accreditation body

responsible for the assessment of the competence of certification bodies, inspection bodies, laboratories and environmental verifier applying for accreditation. This accreditation has been issued under the EA MLA and is therefore recognised as equivalent to other

accreditations issued under the EA MLA within the same accreditation scope.

1 (1)

ACCREDITATION CERTIFICATE

Ackred. nr. 1297 Calibration

ISO/IEC 17025

ABB AB STRI

Registration number 556029-7029

is accredited as a calibration laboratory for the scope specified in appendix 2. The applicable terms of the accreditation are specified in appendix 1.

This laboratory is accredited in accordance with the International Standard ISO/IEC 17025:2005. This

accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system. The accredited laboratory is responsible for the results of performed calibration and

submitted judgements as well as, where applicable, for the selection and application of work methods within the scope of the granted accreditation.

The accreditation is valid until further notice. The Swedish Board for Accreditation and Conformity Assessment (Swedac) regularly carries out surveillance, and a full reassessment every fourth year, in order to verify that the

applicable terms of accreditation, see appendix 1, are continually fulfilled.

This accreditation certificate was issued 2018-08-22 by Tomas Holm,

Manager of the Industry division

Accreditation was granted in accordance with article 5 (1) or Regulation (EC) No 765/2008 regarding accreditation and market surveillance etc. and the Act (SFS 2011:791) concerning Accreditation and Conformity Assessment. Swedac is the national accreditation body

responsible for the assessment of the competence of certification bodies, inspection bodies, laboratories and environmental verifier applying for accreditation. This accreditation has been issued under the EA MLA and is therefore recognised as equivalent to other

accreditations issued under the EA MLA within the same accreditation scope.

Scope of accreditationLaboratorierABB AB Ludvika Accreditation number 1297STRI A000448-008

Electrical testingHigh voltage electrical testingParameter Method Material Flex Field Note

Electrical voltage ANSI/SAIA A92.2:2015 Aerial devices Yes No Endast 5.4.2C225-10:2011 Aerial devices Yes No Endast 5.4

IEC 60044-8:2002 Instrument transformers Yes No Endast 8.3.2-3, 9.2.2

IEC 60060-1:2010 High-voltage equipment Yes No Undantag 9

IEC 60060-2:2010 High-voltage equipment Yes No Undantag smutsprovning med DC

IEC 60076-6:2007 Reactor Yes No Endast 12.8.12IEC 60099-4:2014 Arresters Yes No Endast 8.2,8.9.4, 8.11, 8.14,

10.8.14, 10.8.17.2, delar av 11, 12 och 13

IEC 60137:2008 Insulators Yes No Endast 7.1, 8.1 - 8.7, 9.1 - 9.5

IEC 60143-1:2015 Capacitor Yes No Endast 5.1 - 5.6, 5.9 - 5.13IEC 60168:1994+AMD1:1997+AMD2:2000 CSV

Insulators Yes No Endast 4.1 - 4.9

IEC 60230:1996 Cables Yes No

IEC 60358-1:2013 Capacitor Yes No Endast 9.2, 10.1 - 10.4IEC 60383-1:1993 Insulators Yes No Endast 13, 14, 15.1

IEC 60383-2:1993 Insulators Yes No

IEC 60502-2:2005 Cables Yes No Endast 16.3, 16.4, 18.1.3, 18.1.5, 18.1.7, 18.1.8, 18.2.3, 18.2.4

Sida 1 (5)

Appendix 2ReferenceDate

2018-08-22 2017/3070

High voltage electrical testingParameter Method Material Flex Field Note

Electrical voltage IEC 60502-4:2010 Cables Yes No AC dry and wet, DC dry, PD at ambient, PD at ?t, Imp. at ambient, Imp. at ?t, Heat. cycle in air, Heat. cycle in water

IEC 60507:2013 Insulators Yes No Endast spänningsmätning

IEC 60660:1999 Insulators Yes No Endast 3.3 - 3.6, 5.4

IEC 60700-1:2015 Thyristor valves Yes No Endast 6, 7, 8 (undantag 8.3.6)

IEC 60840:2011 Cables Yes No 9.2-9.3, 10.12, 12.4.4-12.4.7, 13.2.4-13.2.5, 13.3.2.4, 14.4b-e, 15.4.2a-f, Annex E, Annex G (inte LI<50 kV)

IEC 60871-1:2014 Capacitor Yes No Whole, except not complete banks in cl.4 and T1> 1.56 µs in cl.12.2

IEC 60871-2:2014 Capacitor Yes No

IEC 60885-2:1987 Cables Yes No

IEC 60885-3:2015 Cables Yes No Short cables ( ≤50)IEC 61071:2007 Capacitor Yes No Endast 5.5.2, 5.9IEC 61109:2008 Insulators Yes No Endast 10.1, 11.1

IEC 61245:2015 Insulators Yes No

IEC 61284:1998 Overhead lines Yes No Endast 14IEC 61442:2005 Cables Yes No Endast 4.1 - 4.3, 5.2 - 5.3, 7.2, 20

IEC 61462:2007 Insulators Yes No Endast 7.2.2, 7.2.5.3, 7.4.2

IEC 61813:2000 Insulators Yes No Endast 8.1.2, 8.1.5

IEC 61869-2:2012 Instrument transformers Yes No Endast 7.2.2 - 7.2.3, 7.3.1, 7.4.3

IEC 61869-3:2011 Instrument transformers Yes No Endast 7.2.2 - 7.2.3, 7.3.1 - 7.3.2, 7.4.3

IEC 61952:2008 Insulators Yes No Endast 10.2.3, 11.1

Sida 2 (5)


2018-08-22 2017/3070


Electrical voltage IEC 62067:2011 Cables Yes No Endast 9.2 - 9.4, 10.5, 10.10, 10.12, 10.13, 11.2, 12.4.4 - 12.4.7, 13.2.4 - 13.2.5, 13.3.2.4, Bilaga E, Bilaga G

IEC 62155:2003 Insulators Yes No Endast 10.4

IEC 62217:2012 Insulators Yes No Endast 9.2.4, 9.2.7, 9.4.2

IEC 62231:2006 Insulators Yes No Endast 8.2.3, 8.2.6, 8.5, 9.2.1 - 9.2.2

IEC 62271-1:2007 Switchgear Yes No Endast 6.2.6.1 - 6.2.6.2, 6.2.7.1 - 6.2.7.3, 6.2.9, 6.2.11, 6.3, 6.4.1, 6.5, 6.9.1.1, 7.1, 7.3, 7.5

IEC 62271-100:2008+AMD1:2012+COR1:2012

Switchgear Yes No Endast 6.1, 6.2.1 - 6.2.9, 6.2.11, 6.3, 6.5, 7.1

IEC 62271-102:2014 Switchgear Yes No Endast 6.1, 6.2.1 - 9, 6.2.11, 6.3 - 6.5, 6.9, 6.102.3, 6.103, 6.108, 7.1, 7.3, 7.5, 7.101, Annex F

IEC 62271-108:2005 Switchgear Yes No Endast 6.2 - 6.3, 6.4.1, 6.5, 6.9.1.1, 6.102.9.4, 6.114.1, 7.1, 7.3

IEC 62271-109:2013 Switchgear Yes No Endast 6.2 - 6.3, 6.4.1, 6.5, 6.9.1.1, 6.101 - 6.102, 7.1, 7.3

IEC 62271-200:2015 Switchgear Yes No Endast 6.2.6.1 - 6.2.6.2, 6.2.9, 6.2.11, 6.2.101, 6.4.1, 6.5, 6.9.1.1, 6.104, 7.1, 7.3, 7.5, 7.101

IEC 62271-203:2013 Switchgear Yes No Endast 6.2.6.1 - 6.2.6.2, 6.2.7.1 - 6.2.7.3, 6.2.9, 6.2.11, 6.3, 6.4.1, 6.5, 6.9.1.1, 7.1, 7.3, 7.5

IEC 62501:2014 Converter Yes No Endast 4, 7, 9, 9.1, 9.2, 9.3, 9.3.1 - 9.3.4

Sida 3 (5)


2018-08-22 2017/3070


Electrical voltage IEC/IEEE 65700-19-03:2014 Switch Yes No Endast 8.1 - 8.5, 9.1 - 9.7, 10.1 - 10.3

IEEE 404-2012 Cables Yes No Undantag 7.8.2

IEEE 4-2013 High-voltage equipment Yes No

IEEE 48-2009 Cable terminations Yes No Se valideringsdokument

IEEE 82:2002 Insulators Yes No

IEEE C57.13.5-2009 Transformers Yes No Undantag: 10.3 - 10.5, 12.1

IEEE C57.19.00-2004 Bushings Yes No Endast 7.3.1

Partial discharges IEC 60270:2015 High-voltage equipment Yes No Undantag 4.5.2 - 4.5.5Radio interferences CISPR 16-1-1:2015 High-voltage equipment Yes No Endast kvasitoppdetektor del B

CISPR TR 18-2:2010 High-voltage equipment Yes No Endast kvasitoppdetektor del B

IEC 60437:1997 Insulators Yes No

IEEE C63.4-2014 Transformers Yes NoTemperature rise IEC 61869-1:2007 Instrument transformers Yes No Endast 7.2.3.2.1 - 2

IEC 61869-5:2015 Instrument transformers Yes No Endast 7.2.2 - 7.2.4, 7.2.501, 7.3.1, 7.3.501 - 7.3.504, 7.3.2, 7.4.1, 7.4.3

CalibrationElectrical quantities

Parameter Method Measure Material CMC +/- Flex Field

Electrical voltage, AC Process 0411/Provuppställning vid kalibrering, version 2013-11-14

10 kV - 600 kV High-voltage equipment

Peak-Peak/√8: 0,5 % No No


RMS: 0,8 % No No

Sida 4 (5)


2018-08-22 2017/3070

Electrical voltage, DC Process 0411/Provuppställning vid kalibrering, version 2013-11-14


0,5 % No No

Electrical voltage, LI Process 0411/Provuppställning vid kalibrering, version 2013-11-14


Front time: 3,1 % No No


Test voltage: 1,00 % No No


Time to half-value: 2,4 %

No No

Electrical voltage, SI Process 0411/Provuppställning vid kalibrering, version 2013-11-14


Test voltage: 0,96 % No No


Time to half-value: 3,4 %

No No


Time to peak: 3,2 % No No

Sida 5 (5)


2018-08-22 2017/3070

decision on accreditation - stri high voltage testing · testing iso/iec 17025 abb ab stri...

Documents