ddni-lon data sheet rev h
DESCRIPTION
MP230TRANSCRIPT
DDNI-LONLON Gateway
The DDNI-LON is designed to provide a LON single point interface to a Philips Dynalite control system. The DDNI-LON is based on Echelon Corporation’s Neuron 3120 chip, which supports 63 SNVT’s and will support preset control of 100 presets per area for 30 areas. Multiple DDNI-LON devices can be cascaded together to accommodate larger or more complex DyNet networks. The device is configured to operate on the LON network with Echelon Corporation’s LonMaker.
Supply12V DC @ 50mA from the DyNet network
Control Ports1 x RS485 DyNet serial port1 x TP/FTT10A twisted pair LonWorks port
User ControlsDyNet Service SwitchDyNet Diagnostic LEDLON Service SwitchLON Diagnostic LED
Operating Environment0º to 50ºC ambient temperature0% to 95% RH non condensing
ComplianceCE, C-Tick
EnclosureABS DIN Rail enclosure (6 unit)
DimensionsH 86mm x W 105mm x D 70mm
WeightPacked weight 0.6Kg
technical data
For further information contact:
Specifications subject to change without notice. © WMGD Pty Ltd Trading as Dynalite. Unit 6, 691 Gardeners Road Mascot 2020 Australia. ABN 33 097 246 921. All rights reserved. Dynalite, DyNet and associated logos are the registered trademarks of WMGD Pty Ltd. Not to be reproduced without permission.
t +61 2 8338 9899 • f +61 2 8338 9333www.philips.com/dynalite • [email protected]
DDNI-LONLON Gateway
electrical diagram mounting dimensions
DDNI-LON Data Sheet Rev H April 2011
µPDyNetRS485
+VE
D +
D -
GNDSHIELD
TP/FT10LonWorks B
A94
.5
6946
38
51
75
59
105