dbo-432-ac-htp100ex - orga · 2018. 8. 8. · • iec 60079-0, iec 60079-1, iec 60079-7, iec...

DBO-432-AC-HTP100EX Certified LED helideck Circle and H identification system control panel Orga BV Strickledeweg 13 3125 AT SCHIEDAM The Netherlands P.O. Box 3046 3101 EA SCHIEDAM The Netherlands T +31 (0)10 208 5555 F +31 (0)10 437 8445 [email protected] www.orga.nl All values mentioned in this document are typical values Document can be subject to modifications, without prior notice. Datasheet no.: DBO-432-AC-HTP100EX rev 1 Certified LED helideck touchdown/positioning and heliport identification marking system control panel designed to meet the requirements of CAP437, when used in conjunction with the separate touchdown/positioning (Circle) and helideck identification marking (H) lighting panels. Key features • Suitable for Zone 1 areas with increased gas explosion hazard • Suitable for control of the helideck touchdown/positioning marking panels and heliport identification marking panels • Skid or direct wall mounting of control panel possible • Offshore resistant, high quality coating on the sheet steel enclosure • Sheet steel mounting facilities to prevent corrosion problems Standards/Certification • Complies with CAA-UK CAP 437; Offshore helicopter landing areas - Guidance on standards, February 2013, chapter 4 and appendix C • KEMA 02ATEX2103 X; ATEX ¤ II 2G Ex d e IIB T5, according to ATEX Directive 94/9/EC • EN 60079-0, EN 60079-1, EN 60079-7, EN61241-0 and EN61241-1 • IECEx KEM 09.0089X; Ex d e IIB T5 • IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0 and IEC 61241 Electrical characteristics • Operating voltage: Multi-voltage AC input available (110-254Vac) • System power consumption: max. 160W including panels load • Connection details: M25x1.5 cable gland entries Physical characteristics • Dimensions (L x W x H): 341.5x 360 x 865mm • Weight: 85kg • Degree of protection: IP66 • Operating temperature range: -40°C to +55°C System design, control and monitoring • System Power - ON, Auto/Remote • Power on indication • System fail contact

Upload: others

Post on 30-Jun-2021

37 views

Category:

Documents

1 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: DBO-432-AC-HTP100EX - Orga · 2018. 8. 8. · • IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0 and IEC 61241 Electrical characteristics • Operating voltage: Multi-voltage

DBO-432-AC-HTP100EXCertified LED helideck Circle and H identification system control panel

Orga BVStrickledeweg 133125 AT SCHIEDAMThe Netherlands

P.O. Box 30463101 EA SCHIEDAMThe Netherlands

T +31 (0)10 208 5555F +31 (0)10 437 [email protected]

All values mentioned in this document are typical values

Document can be subject to modifications, without prior notice. Datasheet no.: DBO-432-AC-HTP100EX rev 1

Certified LED helideck touchdown/positioning and heliport identification marking systemcontrol panel designed to meet the requirements of CAP437, when used in conjunction withthe separate touchdown/positioning (Circle) and helideck identification marking (H)lighting panels.

Key features• Suitable for Zone 1 areas with

increased gas explosion hazard• Suitable for control of the

helideck touchdown/positioningmarking panels and heliportidentification marking panels

• Skid or direct wall mounting ofcontrol panel possible

• Offshore resistant, high qualitycoating on the sheet steelenclosure

• Sheet steel mounting facilitiesto prevent corrosion problems

Standards/Certification• Complies with CAA-UK CAP 437;

Offshore helicopter landingareas - Guidance on standards,February 2013, chapter 4 and appendix C

• KEMA 02ATEX2103 X; ATEX ¤ II 2G Ex d e IIB T5,according to ATEX Directive 94/9/EC

• EN 60079-0, EN 60079-1, EN 60079-7, EN61241-0 and EN61241-1

• IECEx KEM 09.0089X; Ex d e IIB T5

• IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0 and IEC 61241