datenblatt / data sheet norm en 14420-7 · 2020. 12. 28. · the en 14420-7 norm was made, and this...
TRANSCRIPT
Datenblatt / Data Sheet
18 / V 2018
Die Kamlok Kupplungen haben Ihren Ursprung in den USA und sind sicherlich eine der meist verbreitesten kupplungstypen weltweit. Grundlage war die us norm Mil-C-27487 des amerikanischen Militärs.
diese us norm wurde 1999 durch die federal Mil a-a-59326A ersetzt.
durch die allgemeine standardisierung in europa ist 2004 die Norm EN14420-7 eingeführt worden, die die alte DIN 2828 ersetzt hat. Hauptunterschiede sind, dass die Innengewinde (A,+D Teil) mit einer Flachdichtung versehen sind und die Stutzen mit einem Sicherungsbund für Klemmschaleneinband (C +E Teil ).
Alle von MCC gefertigten Teile übertreffen die anforderungen der normen.
1. die norM
2. die MCC-kaMlok kupplunG iM detailtHe MCC CaMloCk CouplinG in details
The Camlock coupling is originally from USA, and properly the most common and most used coupling system in the world. it was developed and founded in the us military norm Mil-C-27487.
This norm was replaced by the Federal Mil-A-A-59326A norm in 1999.
During the common standardization in Europe in 2004, the EN 14420-7 norm was made, and this new norm replaced the old DIN 2828. The main changes were, that the inner thread(part A and D) got a flat seal and the shanks got a safety collar for safety clamps (part C + E).
all of the MCC manufactured parts exceeds the requirements of the norm.
a. Kennzeichung der Kupplung mit MCC andere Seite Type, Größe & MaterialIdentification of the coupling part with MCC, other site type, size & material
b. Hebel aus Edelstahl AISI 304 mit MCC Logo versehenLever in stainless steel, AISI 304 with MCC logo
c. Öse zur Arretierung serienmäßigstandard eyelet with interlock system
d. alle lieferungen inkl. Metallsplintall couplings are delivered with metal locking pin
e. standardichtung nbrstandard seal in nbr
a.
b.
c.
d.
e.
diese kupplungen werden in 4 verschiedenen werkstoffen hergestellt :
- Edelstahl: AISI 316/ CF8M / 1.4401- aluminium : asG7- Messing : astM bs84- Polypropylen : 25/30% Glasfaserverstärkt
the MCC Camlock are manufactured in 4 different materials:
-Stainless Steel: AISI 316/CF8M/1.4401-aluminum: asG7-brass: astM bs84 -Polyproplyen: with 25-30% glass fiber
e 200 ss seCurity
kupplung typCoupling - type
nennweitedimension
werkstoffMaterial
bsp = Gewindeartbsp = thread
Vaterteil m. SchlauchstutzenMale Coupling with Hose-shank 2” SS = CF8M/316
din = für Klemmschaleneinband /
Gewindedichtung DIN = for safety clamps / thread seal
erklärung der MCC artikel nummernein beispiel für kamlok kupplung e200ss
norM en 14420-7
1. tHe standard
*ne
ue
s d
esi
Gn
**n
ew
de
sin
*
V 2018/ 19
FED MIL / EN / DINHEBELArMATUrEN (KAMLOK)
4. lieferbare diCHtunGen
Kupplungen mit rillenstutzen (Teil C+E):Sind geeignet zum Einband mit Schelle.
Kupplungen mit Schalenstutzen (Teil C+E) nach EN 14420:Geeignet zum Einband mit Klemmschalen oder zur verpressung mit presshülsen.
Kupplungen mit Aussen-/ Innengewinde (Teil B+F / A+D):Versehen mit BSP Gewinde, andere Gewindetypen wie npt auf anfrage.
kupplungen mit anschweißende:„Butt welded”
Ausführung „Socked welded“ auf Anfrage.
werkseitig mit nbr kupplungsdichtung versehen.Folgende weitere Ausführungen sind lieferbar
- CSM, (Hypalon®)
- epdM
- FKM (VITON®)
- PTFE ummantelt, seitlich offen mit • nbr• epdM• FKM (VITON®)
- ptfe komplett ummantelt• mit epdM kern• mit silikon kern• mit FKM (Viton®) Kern auf Anfrage
- PTFE komplett ummantelt (runddichtung)• mit FKM (VITON®) Kern• mit vMQ kern auf anfrage
3. das lieferproGraMM
Couplings with grooved hose shank(part C and E):recommended to use clamping band or clamps.
Couplings with hose shank (part C and E acc. to EN norm 14420):recommended to use safety clamp shells and ferrules.
Coupling with male / female thread(part B+F / A+D):Standard with BSP thread, other types of thread, like npt on request.
Coupling for welding:“butt welded”
Type “socked welded” on request.
nbr seals as standard from factory. other types on request
- CSM(Hypalon®)
- epdM
- FKM,(Viton®)
- PTFE coated, open on the side with• nbr• epdM• FKM (VITON®)
- ptfe complete enveloped• with epdM core• with silicone core• with FKM(Viton®) core on demand
- ptfe complete round seal enveloped• with FKM(Viton®)• with vMQ core on demand
3. tHe produCt ranGe
4. seals in our produCt ranGe
*ne
ue
s d
esi
Gn
**n
ew
de
sin
*
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
20 / V 2018
Vaterteil Typ A nach MIL A-A-59326A mit BSPP Innengewinde - Edelstahl AISI 316 Male Adapter type A - MIL A-A-59326A with female BSPP thread - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadA050SS 10 bar DN015 1/2"A075SS 17 bar DN020 3/4"A100SS 17 bar DN025 1"A125SS 17 bar DN032 1"1/4A150SS 17 bar DN040 1"1/2A200SS 17 bar DN050 2"A250SS 10 bar DN065 2"1/2A300SS 8,5 bar DN080 3"A400SS 6,5 bar DN100 4"A500SS 5 bar DN125 5"A600SS 5 bar DN150 6"
Mutterteil Typ C nach MIL A-A-59326A mit Stutzen für Schelleneinband - Edelstahl AISI 316 Female Coupler Type C - MIL A-A-59326A with grooved hose-shank - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension ShankC050SS2
NBR DichtungNBR Gasket
10 bar DN015 13mm C075SS 17 bar DN020 21mmC100SS 17 bar DN025 27mmC125SS 17 bar DN032 34mmC150SS 17 bar DN040 40mmC200SS 17 bar DN050 51mmC250SS 10 bar DN065 64mmC300SS 8,5 bar DN080 76mmC400SS 6,5 bar DN100 103mmC500SS 5 bar DN125 128mmC600SS 5 bar DN150 152mm
Mutterteil Typ B nach MIL A-A-59326A mit BSPT Aussengewinde - Edelstahl AISI 316 Female Coupler type B - MIL A-A-59326A with male BSPT thread - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadB050SS2
NBR DichtungNBR Gasket
10 bar DN015 1/2"B075SS 17 bar DN020 3/4"B100SS 17 bar DN025 1"B125SS 17 bar DN032 1"1/4B150SS 17 bar DN040 1"1/2B200SS 17 bar DN050 2"B250SS 10 bar DN065 2"1/2B300SS 8,5 bar DN080 3"B400SS 6,5 bar DN100 4"B500SS 5 bar DN125 5"B600SS 5 bar DN150 6"
*ne
ue
s de
siGn
**n
ew
de
siGn
*
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
V 2018 / 21
Mutterteil Typ D nach MIL A-A-59326A mit BSPP Innengewinde - Edelstahl AISI 316 Female Coupler type D - MIL A-A-59326A with female BSPP thread - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadD050SS2
NBR DichtungNBR Gasket
10 bar DN015 1/2"D075SS 17 bar DN020 3/4"D100SS 17 bar DN025 1"D125SS 17 bar DN032 1"1/4D150SS 17 bar DN040 1"1/2D200SS 17 bar DN050 2"D250SS 10 bar DN065 2"1/2D300SS 8,5 bar DN080 3"D400SS 6,5 bar DN100 4"D500SS 5 bar DN125 5"D600SS 5 bar DN150 6"
Vaterteil Typ E nach MIL A-A-59326A mit Stutzen für Schelleneinband - Edelstahl AISI 316 Male Adapter type E - MIL A-A-59326A with grooved hose-shank - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension Shank
E050SS 10 bar DN015 13mm E075SS 17 bar DN020 21mmE100SS 17 bar DN025 27mmE125SS 17 bar DN032 34mmE150SS 17 bar DN040 40mmE200SS 17 bar DN050 51mmE250SS 10 bar DN065 64mmE300SS 8,5 bar DN080 76mmE400SS 6,5 bar DN100 103mmE500SS 5 bar DN125 128mmE600SS 5 bar DN150 152mm
Vaterteil Typ F nach MIL A-A-59326A mit BSPT Aussengewinde - Edelstahl AISI 316 Male Adapter type F - MIL A-A-59326A with male BSPT thread - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension Thread
F050SS 10 bar DN015 1/2"F075SS 17 bar DN020 3/4"F100SS 17 bar DN025 1"F125SS 17 bar DN032 1"1/4F150SS 17 bar DN040 1"1/2F200SS 17 bar DN050 2"F250SS 10 bar DN065 2"1/2F300SS 8,5 bar DN080 3"F400SS 6,5 bar DN100 4"F500SS 5 bar DN125 5"F600SS 5 bar DN150 6"
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
22 / V 2018
Stopfen Type DP nach MIL A-A-59326A - Edelstahl AISI 316 Dust plug type DP - MIL A-A-59326A - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck NennweitePart-Nr. Description Working Pressure Dimension DP050SS 10 bar DN015DP075SS 17 bar DN020DP100SS 17 bar DN025DP125SS 17 bar DN032DP150SS 17 bar DN040DP200SS 17 bar DN050DP250SS 10 bar DN065DP300SS 8,5 bar DN080DP400SS 6,5 bar DN100DP500SS 5 bar DN125DP600SS 5 bar DN150
Kappe Typ DC nach MIL A-A-59326A - Edelstahl AISI 316 Dust cap type DC - MIL A-A-59326A - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck NennweitePart-Nr. Description Working Pressure Dimension DC050SS2
NBR DichtungNBR Gasket
10 bar DN015DC075SS 17 bar DN020DC100SS 17 bar DN025DC125SS 17 bar DN032DC150SS 17 bar DN040DC200SS 17 bar DN050DC250SS 10 bar DN065DC300SS 8,5 bar DN080DC400SS 6,5 bar DN100DC500SS 5 bar DN125DC600SS 5 bar DN150
Vaterteil - Kupplung nach MIL A-A-59326A mit Anschweissende - Edelstahl AISI 316Male - Butweld camlock - MIL A-A-59326A - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite Anschw (ID x AD)
Part-Nr. Description Working Pressure Dimension BW (ID x OD)F050SSBW 10 bar DN015 14,4 x 21,4F075SSBW 10 bar DN020 19 x 28F100SSBW 10 bar DN025 26,2 x 34,9F125SSBW 10 bar DN032 33,6 x 43,4F150SSBW 10 bar DN040 38,2 x 48,6F200SSBW 10 bar DN050 50,5 x 60,8F250SSBW 10 bar DN065 62,5 x 76,5F300SSBW 10 bar DN080 77,4 x 88,3F400SSBW 10 bar DN100 102,8 x 114,1F500SSBW 10 bar DN125 128 x 143F600SSBW 10 bar DN150 152 x 169
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
V 2018 / 23
Mutterteil- Kupplung nach MIL A-A-59326A auf Festflansch - Edelstahl AISI 316 Female flanged Cam & Groove coupling - MIL A-A-59326A - SS AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite FlanschPart-Nr. Description Working Pressure Dimension Flange
75CNP
NBR DichtungNBR Gasket
10 bar DN020 PN 10/16100CNP 10 bar DN025 PN 10/16125CNP 10 bar DN032 PN 10/16150CNP 10 bar DN040 PN 10/16200CNP 10 bar DN050 PN 10/16250CNP 10 bar DN065 PN 10/16300CNP 10 bar DN080 PN 10/16400CNP 10 bar DN100 PN 10/16"
Mutterteil - Kupplung nach MIL A-A-59326A mit Anschweissende - Edelstahl AISI 316Female - Butweld camlock - MIL A-A-59326A - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite Anschw (ID x AD)
Part-Nr. Description Working Pressure Dimension BW (ID x OD)B050SSBW
NBR DichtungNBR Gasket
10 bar DN015 14,4 x 21,4B075SSBW 10 bar DN020 19 x 28B100SSBW 10 bar DN025 26,2 x 34,9B125SSBW 10 bar DN032 33,6 x 43,4B150SSBW 10 bar DN040 38,2 x 48,6B200SSBW 10 bar DN050 50,5 x 60,8B250SSBW 10 bar DN065 62,5 x 76,5B300SSBW 10 bar DN080 77,4 x 88,3B400SSBW 10 bar DN100 102,8 x 114,1B500SSBW 10 bar DN125 128 x 143B600SSBW 10 bar DN150 152 x 169
Kamlok Adapter Stücke nach MIL A-A-59326A - Edelstahl AISI 316 Camlock Adapter - MIL A-A-59326A - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck DN 1 DN 2Part-Nr. Description Working Pressure DN 1 DN 2
AA200200SS A - A 17 bar DN050 DN050AA300300SS A - A 8,5 bar DN080 DN080DA300200SS D - A 8,5 bar DN080 DN050DA400300SS D - A 6,5 bar DN100 DN080C200150SS C 17 bar DN50 DN040E200150SS E 17 bar DN50 DN040
Weitere Größen und Kombinationen lieferbar. Other Sizes and Adapter available
Vaterteil - Kupplung nach MIL A-A-59326A auf Festflansch - Edelstahl AISI 316 Male flanged Cam & Groove coupling - MIL A-A-59326A - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite FlanschPart-Nr. Description Working Pressure Dimension Flange
75ANP 10 bar DN020 PN 10/16100ANP 10 bar DN025 PN 10/16125ANP 10 bar DN032 PN 10/16150ANP 10 bar DN040 PN 10/16200ANP 10 bar DN050 PN 10/16250ANP 10 bar DN065 PN 10/16300ANP 10 bar DN080 PN 10/16400ANP 10 bar DN100 PN 10/16
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
24 / V 2018
Vaterteil TYP A nach EN14420-7 mit BSPP Innengewinde flachdichtend - Edelstahl AISI 316Male Adapter Type A - EN14420-7 with female BSPP Thread - flat sealed - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension Thread
A075DINSS
PTFE Gewindedichtung
PTFE Thread-Gasket
16 bar DN019 3/4"A100DINSS 16 bar DN025 1"A125DINSS 16 bar DN032 1"1/4A150DINSS 16 bar DN040 1"1/2A200DINSS 16 bar DN050 2"A250DINSS 16 bar DN065 2"1/2A300DINSS 16 bar DN080 3"A400DINSS 16 bar DN100 4"
Vaterteil TYP E nach EN14420-7 mit glattem Schlauchstutzen für Klemmschaleneinband - Edelstahl AISI 316Male Adapter Type E - EN 14420-7 with smooth shank and collar - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension ShankE075DINSS 16 bar DN019 19mmE100DINSS 16 bar DN025 25mmE125DINSS 16 bar DN032 32mmE150DINSS 16 bar DN040 38mmE200DINSS 16 bar DN050 50mmE250DINSS 16 bar DN065 63mmE300DINSS 16 bar DN080 75mmE400DINSS 16 bar DN100 100mm
Vaterteil TYP E mit gerilltem Schlauchstutzen für Klemmschaleneinband - Edelstahl AISI 316Male Adapter Type E - with serrated shank and collar - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension Shank
E075DINSS-R 16 bar DN019 19mmE100DINSS-R 16 bar DN025 25mmE125DINSS-R 16 bar DN032 32mmE150DINSS-R 16 bar DN040 38mmE200DINSS-R 16 bar DN050 50mmE250DINSS-R 16 bar DN065 63mmE300DINSS-R 16 bar DN080 75mmE400DINSS-R 16 bar DN100 100mm
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
V 2018 / 25
Mutterteil TYP C nach EN14420-7 mit glattem Schlauchstutzen für Klemmschaleneinband - Edelstahl AISI 316Female Adapter Type C - EN 14420-7 - with smooth shank and collar - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension Shank
C075DINSS
NBR DichtungNBR Gasket
16 bar DN019 19mmC100DINSS 16 bar DN025 25mmC125DINSS 16 bar DN032 32mmC150DINSS 16 bar DN040 38mmC200DINSS 16 bar DN050 50mmC250DINSS 16 bar DN065 63mmC300DINSS 16 bar DN080 75mmC400DINSS 16 bar DN100 100mm
Mutterteil TYP C - mit gerilltem Schlauchstutzen für Klemmschaleneinband - Edelstahl AISI 316Female Adapter Type C - with serrated shank and collar - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension Shank
C075DINSS-R
NBR Dichtung
NBR Gasket
16 bar DN019 19mmC100DINSS-R 16 bar DN025 25mmC125DINSS-R 16 bar DN032 32mmC150DINSS-R 16 bar DN040 38mmC200DINSS-R 16 bar DN050 50mmC250DINSS-R 16 bar DN065 63mmC300DINSS-R 16 bar DN080 75mmC400DINSS-R 16 bar DN100 100mm
Mutterteil TYP D nach EN14420-7 mit BSPP Innengewinde flachdichtend - Edelstahl AISI 316Female Adapter Type D - EN14420-7 with female BSPP-Thread - flat sealed- Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension Thread
D075DINSS
NBR DichtungPTFE Gewindedich-
tung
NBR GasketPTFE Thread-Gasket
16 bar DN019 3/4"D100DINSS 16 bar DN025 1"D125DINSS 16 bar DN032 1"1/4D150DINSS 16 bar DN040 1"1/2D200DINSS 16 bar DN050 2"D250DINSS 16 bar DN065 2"1/2D300DINSS 16 bar DN080 3"D400DINSS 16 bar DN100 4"
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
26 / V 2018
Mutterteil Typ B nach MIL A-A-59326A mit BSPT Aussengewinde - mit Sicherheitsverschluss - Edelstahl AISI 316 Female Coupler Type B - MIL A-A-59326A with male BSPT thread - Type Security Look - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension Thread
B100SECURITY
NBR DichtungNBR Gasket
17 bar DN025 1"B125SECURITY 17 bar DN032 1"1/4B150SECURITY 17 bar DN040 1"1/2B200SECURITY 17 bar DN050 2"B300SECURITY 8,5 bar DN080 3"B400SECURITY 6,5 bar DN100 4"
Mutterteil Typ C nach MIL A-A-59326A mit Stutzen für Schelleneinband - mit Sicherheitsverschluss - Edelstahl 316 Female Coupler Type C - MIL A-A-59326A with grooved hose-shank - Type Security Look - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension Shank
C100SECURITY
NBR DichtungNBR Gasket
10 bar DN015 13mm C125SECURITY 17 bar DN020 21mmC150SECURITY 17 bar DN025 27mmC200SECURITY 17 bar DN032 34mmC300SECURITY 17 bar DN040 40mmC400SECURITY 17 bar DN050 51mm
Mutterteil Typ D nach MIL A-A-59326A mit BSPP Innengewinde - mit Sicherheitsverschluss - Edelstahl AISI 316 Female Coupler Type D - MIL A-A-59326A with female BSPP thread - Type Security Look - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension Thread
D100SECURITY
NBR DichtungNBR Gasket
17 bar DN025 1"D125SECURITY 17 bar DN032 1"1/4D150SECURITY 17 bar DN040 1"1/2D200SECURITY 17 bar DN050 2"D300SECURITY 8,5 bar DN080 3"D400SECURITY 6,5 bar DN100 4"
Kappe Typ DC nach MIL A-A-59326A - mit Sicherheitsverschluss - Edelstahl AISI 316 Dust cap Type DC - MIL A-A-59326A - Type Security Look - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck NennweitePart-Nr. Description Working Pressure Dimension
DC100SECURITY
NBR DichtungNBR Gasket
17 bar DN025DC125SECURITY 17 bar DN032DC150SECURITY 17 bar DN040DC200SECURITY 17 bar DN050DC300SECURITY 8,5 bar DN080DC400SECURITY 6,5 bar DN100
Zubehör finden Sie auf Seite: 38Accessories on Page: 38!!!
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
V 2018 / 27
Mutterteil Typ D nach EN 14420-7 mit BSPP Innengewinde - mit Sicherheitsverschluss - Edelstahl AISI 316 Female Coupler Type D - EN 14420-7 with female BSPP thread - Type Security Look - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension Thread
D100SECURITY-DINNBR Dichtung
PTFE Gewinde-dichtung
NBR GasketPTFE Thread-Gasket
16 bar DN025 1"D125SECURITY-DIN 16 bar DN032 1"1/4D150SECURITY-DIN 16 bar DN040 1"1/2D200SECURITY-DIN 16 bar DN050 2"D300SECURITY-DIN 16 bar DN080 3"D400SECURITY-DIN 16 bar DN100 4"
Mutterteil Typ C nach EN 14420-7 mit glattem Stutzen f. Klemmschalen - mit Sicherheitsverschluss - Edelstahl 316 Female Coupler Type C - EN 14420-7 with smooth hose-shank - - Type Security Look - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension Shank
C100SECURITY-DIN
NBR Dichtung
NBR Gasket
16 bar DN025 1"C125SECURITY-DIN 16 bar DN032 1"1/4C150SECURITY-DIN 16 bar DN040 1"1/2C200SECURITY-DIN 16 bar DN050 2"C300SECURITY-DIN 16 bar DN080 3"C400SECURITY-DIN 16 bar DN100 4"
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
28 / V 2018
HebelarMaturen - kaMlokVaterteil Typ A nach MIL A-A-59326A mit BSPP Innengewinde - MessingMale Adapter Type A - MIL A-A-59326A - female BSPP thread - Brass
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadA050BR 10 bar DN015 1/2"A075BR 17 bar DN020 3/4"A100BR 17 bar DN025 1"A125BR 17 bar DN032 1"1/4A150BR 17 bar DN040 1"1/2A200BR 17 bar DN050 2"A250BR 10 bar DN065 2"1/2A300BR 8,5 bar DN080 3"A400BR 6,5 bar DN100 4"A500BR 5 bar DN125 5"A600BR 5 bar DN150 6"
Mutterteil Typ C nach MIL A-A-59326A mit Stutzen für Schelleneinband - Messing Female Coupler Type C - MIL A-A-59326A with grooved hose-shank - Brass
Artikel-Nr. Beschreibung Betriebsdruck Nennweite Stutzen DNPart-Nr. Description Working Pressure Dimension ShankC050BR
NBR DichtungNBR Gasket
10 bar DN015 13mm C075BR 17 bar DN020 21mmC100BR 17 bar DN025 27mmC125BR 17 bar DN032 34mmC150BR 17 bar DN040 40mmC200BR 17 bar DN050 51mmC250BR 10 bar DN065 64mmC300BR 8,5 bar DN080 76mmC400BR 6,5 bar DN100 103mmC500BR 5 bar DN125 128mmC600BR 5 bar DN150 152mm
Mutterteil Typ B nach MIL A-A-59326A mit BSPT Aussengewinde - MessingFemale Coupler Type B - MIL A-A-59326A - male BSPT thread - Brass
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadB050BR
NBR DichtungNBR Gasket
10 bar DN015 1/2"B075BR 17 bar DN020 3/4"B100BR 17 bar DN025 1"B125BR 17 bar DN032 1"1/4B150BR 17 bar DN040 1"1/2B200BR 17 bar DN050 2"B250BR 10 bar DN065 2"1/2B300BR 8,5 bar DN080 3"B400BR 6,5 bar DN100 4"B500BR 5 bar DN125 5"B600BR 5 bar DN150 6"
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
V 2018 / 29
Mutterteil Typ D nach MIL A-A-59326A mit BSPP Innengewinde - MessingFemale Coupler type D - MIL A-A-59326A - female BSPP thread - Brass
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadD050BR
NBR DichtungNBR Gasket
10 bar DN015 1/2"D075BR 17 bar DN020 3/4"D100BR 17 bar DN025 1"D125BR 17 bar DN032 1"1/4D150BR 17 bar DN040 1"1/2D200BR 17 bar DN050 2"D250BR 10 bar DN065 2"1/2D300BR 8,5 bar DN080 3"D400BR 6,5 bar DN100 4"D500BR 5 bar DN125 5"D600BR 5 bar DN150 6"
Vaterteil Typ E nach MIL A-A-59326A mit Stutzen für Schelleneinband - MessingMale Adapter type E - MIL A-A-59326A - with grooved hose-shank - Brass
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension ShankE050BR 10 bar DN015 13mm E075BR 17 bar DN020 21mmE100BR 17 bar DN025 27mmE125BR 17 bar DN032 34mmE150BR 17 bar DN040 40mmE200BR 17 bar DN050 51mmE250BR 10 bar DN065 64mmE300BR 8,5 bar DN080 76mmE400BR 6,5 bar DN100 103mmE500BR 5 bar DN125 128mmE600BR 5 bar DN150 152mm
Vaterteil Typ F nach MIL A-A-59326A mit BSPT Aussengewinde - MessingMale Adapter type F - MIL A-A-59326A -male BSPT thread - Brass
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadF050BR 10 bar DN015 1/2"F075BR 17 bar DN020 3/4"F100BR 17 bar DN025 1"F125BR 17 bar DN032 1"1/4F150BR 17 bar DN040 1"1/2F200BR 17 bar DN050 2"F250BR 10 bar DN065 2"1/2F300BR 8,5 bar DN080 3"F400BR 6,5 bar DN100 4"F500BR 5 bar DN125 5"F600BR 5 bar DN150 6"
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
30 / V 2018
Stopfen Typ DP nach MIL A-A-59326A - MessingDust plug type DP - MIL A-A-59326A - Brass
Artikel-Nr. Betriebsdruck NennweitePart-Nr. Working Pressure Dimension DP050BR 10 bar DN015DP075BR 17 bar DN020DP100BR 17 bar DN025DP125BR 17 bar DN032DP150BR 17 bar DN040DP200BR 17 bar DN050DP250BR 10 bar DN065DP300BR 8,5 bar DN080DP400BR 6,5 bar DN100DP500BR 5 bar DN125DP600BR 5 bar DN150
Kappe Typ DC nach MIL A-A-59326A -Messing Dust cap type DC - MIL A-A-59326A - Brass
Artikel-Nr. Beschreibung Betriebsdruck NennweitePart-Nr. Description Working Pressure Dimension DC050BR
NBR DichtungNBR Gasket
10 bar DN015DC075BR 17 bar DN020DC100BR 17 bar DN025DC125BR 17 bar DN032DC150BR 17 bar DN040DC200BR 17 bar DN050DC250BR 10 bar DN065DC300BR 8,5 bar DN080DC400BR 6,5 bar DN100DC500BR 5 bar DN125DC600BR 5 bar DN150
Zubehör finden Sie auf Seite: 38Accessories on Page: 38!!!
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
V 2018 / 31
Mutterteil TYP D - EN14420-7 mit BSPP Innengewinde flachdichtend - MessingFemale Adapter Type D - EN14420-7 with female BSPP-Thread - flat sealed - Brass
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension Thread
D075DINBR-JNBR DichtungPU Gewinde-
dichtung
NBR GasketPU Thread
Gasket
16 bar DN019 3/4"D100DINBR-J 16 bar DN025 1"D125DINBR-J 16 bar DN032 1"1/4D150DINBR-J 16 bar DN040 1"1/2D200DINBR-J 16 bar DN050 2"D250DINBR-J 16 bar DN125 2"1/2D300DINBR-J 16 bar DN080 3"D400DINBR-J 16 bar DN100 4"
Vaterteil TYP A nach EN14420-7 mit BSPP Innengewinde flachdichtend - MessingMale Adapter Type A - EN14420-7 with female BSPP-Thread - flat sealed - Brass
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension Thread
A075DINBR-J
PU Gewinde-dichtung
PU ThreadGasket
16 bar DN019 3/4"A100DINBR-J 16 bar DN025 1"A125DINBR-J 16 bar DN032 1"1/4A150DINBR-J 16 bar DN040 1"1/2A200DINBR-J 16 bar DN050 2"A250DINBR-J 16 bar DN125 2"1/2A300DINBR-J 16 bar DN080 3"A400DINBR-J 16 bar DN100 4"
Mutterteil TYP C nach EN14420-7 mit Schlauchstutzen für Klemmschaleneinband - MessingFemale Adapter Type C - EN14420-7 with Smooth shank and collar - Brass
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension Shank
C075DINBR-J
NBR DichtungNBR Gasket
16 bar DN019 3/4"C100DINBR-J 16 bar DN025 1"C125DINBR-J 16 bar DN032 1"1/4C150DINBR-J 16 bar DN040 1"1/2C200DINBR-J 16 bar DN050 2"C250DINBR-J 16 bar DN125 2"1/2C300DINBR-J 16 bar DN080 3"C400DINBR-J 16 bar DN100 4"
Vaterteil TYP E nach EN14420-7 mit Schlauchstutzen für Klemmschaleneinband - MessingMale Adapter Type E - EN14420-7 with Smooth shank and collar - Brass
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension Shank
E075DINBR-J 16 bar DN019 3/4"E100DINBR-J 16 bar DN025 1"E125DINBR-J 16 bar DN032 1"1/4E150DINBR-J 16 bar DN040 1"1/2E200DINBR-J 16 bar DN050 2"E250DINBR-J 16 bar DN125 2"1/2E300DINBR-J 16 bar DN080 3"E400DINBR-J 16 bar DN100 4"
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
32 / V 2018
Vaterteil Typ A nach MIL A-A-59326A mit BSPP Innengewinde - AluminiumMale Adapter type A - MIL A-A-59326A - female BSPP thread - Aluminum
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadA050AL 10 bar DN015 1/2"A075AL 17 bar DN020 3/4"A100AL 17 bar DN025 1"A125AL 17 bar DN032 1"1/4A150AL 17 bar DN040 1"1/2A200AL 17 bar DN050 2"A250AL 10 bar DN065 2"1/2A300AL 8,5 bar DN080 3"A400AL 6,5 bar DN100 4"A500AL 5 bar DN125 5"A600AL 5 bar DN150 6"A800AL 4 bar DN200 8"
Mutterteil Typ C nach MIL A-A-59326A mit Stutzen für Schelleneinband - Aluminium Female Coupler Type C - MIL A-A-59326A with grooved hose-shank - Aluminum
Artikel-Nr. Beschreibung Betriebsdruck Nennweite Stutzen DNPart-Nr. Description Working Pressure Dimension ShankC050AL
NBR DichtungNBR Gasket
10 bar DN015 13mm C075AL 17 bar DN020 21mmC100AL 17 bar DN025 27mmC125AL 17 bar DN032 34mmC150AL 17 bar DN040 40mmC200AL 17 bar DN050 51mmC250AL 10 bar DN065 64mmC300AL 8,5 bar DN080 76mmC400AL 6,5 bar DN100 103mmC500AL 5 bar DN125 128mmC600AL 5 bar DN150 152mmC800AL 4 bar DN200 200mm
Mutterteil Typ B nach MIL A-A-59326A mit BSPT Aussengewinde - AluminiumFemale Coupler type B - MIL A-A-59326A with male BSPT thread - Aluminum
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadB050AL
NBR DichtungNBR Gasket
10 bar DN015 1/2"B075AL 17 bar DN020 3/4"B100AL 17 bar DN025 1"B125AL 17 bar DN032 1"1/4B150AL 17 bar DN040 1"1/2B200AL 17 bar DN050 2"B250AL 10 bar DN065 2"1/2B300AL 8,5 bar DN080 3"B400AL 6,5 bar DN100 4"B500AL 5 bar DN125 5"B600AL 5 bar DN150 6"B800AL 4 bar DN200 8"
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
V 2018 / 33
Mutterteil Typ D nach MIL A-A-59326A mit BSPP Innengewinde - AluminiumFemale Coupler type D - MIL A-A-59326A - female BSPP thread - Aluminum
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadD050AL
NBR DichtungNBR Gasket
10 bar DN015 1/2"D075AL 17 bar DN020 3/4"D100AL 17 bar DN025 1"D125AL 17 bar DN032 1"1/4D150AL 17 bar DN040 1"1/2D200AL 17 bar DN050 2"D250AL 10 bar DN065 2"1/2D300AL 8,5 bar DN080 3"D400AL 6,5 bar DN100 4"D500AL 5 bar DN125 5"D600AL 5 bar DN150 6"D800AL 4 bar DN200 8"
Vaterteil Typ E nach MIL A-A-59326A mit Stutzen für Schelleneinband - AluminiumMale Adapter type E - MIL A-A-59326A - with grooved hose-shank - Aluminum
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension ShankE050AL 10 bar DN015 13mm E075AL 17 bar DN020 21mmE100AL 17 bar DN025 27mmE125AL 17 bar DN032 34mmE150AL 17 bar DN040 40mmE200AL 17 bar DN050 51mmE250AL 10 bar DN065 64mmE300AL 8,5 bar DN080 76mmE400AL 6,5 bar DN100 103mmE500AL 5 bar DN125 128mmE600AL 5 bar DN150 152mmE800AL 4 bar DN200 200mm
Vaterteil Typ F nach MIL A-A-59326A mit BSPT Aussengewinde - AluminiumMale Adapter type F - MIL A-A-59326A - male BSPT thread - Aluminum
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadF050AL 10 bar DN015 1/2"F075AL 17 bar DN020 3/4"F100AL 17 bar DN025 1"F125AL 17 bar DN032 1"1/4F150AL 17 bar DN040 1"1/2F200AL 17 bar DN050 2"F250AL 10 bar DN065 2"1/2F300AL 8,5 bar DN080 3"F400AL 6,5 bar DN100 4"F500AL 5 bar DN125 5"F600AL 5 bar DN150 6"F800AL 4 bar DN200 8"
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
34 / V 2018
Stopfen Typ DP nach MIL A-A-59326A - AluminiumDust plug type DP - MIL A-A-59326A - Aluminum
Artikel-Nr. Beschreibung Betriebsdruck NennweitePart-Nr. Description Working Pressure Dimension DP050AL 10 bar DN015DP075AL 17 bar DN020DP100AL 17 bar DN025DP125AL 17 bar DN032DP150AL 17 bar DN040DP200AL 17 bar DN050DP250AL 10 bar DN065DP300AL 8,5 bar DN080DP400AL 6,5 bar DN100DP500AL 5 bar DN125DP600AL 5 bar DN150DP800AL 4 bar DN200
Kappe Typ DC nach MIL A-A-59326A - Aluminium Dust cap type DC - MIL A-A-59326A - Aluminum
Artikel-Nr. Beschreibung Betriebsdruck NennweitePart-Nr. Description Working Pressure Dimension DC050AL
NBR DichtungNBR Gasket
10 bar DN015DC075AL 17 bar DN020DC100AL 17 bar DN025DC125AL 17 bar DN032DC150AL 17 bar DN040DC200AL 17 bar DN050DC250AL 10 bar DN065DC300AL 8,5 bar DN080DC400AL 6,5 bar DN100DC500AL 5 bar DN125DC600AL 5 bar DN150DC800AL 4 bar DN200
Kamlok Adapter - Aluminium Camlock Adapter - Aluminum
Artikel-Nr. Beschreibung Betriebsdruck DN1 DN2Part-Nr. Description Working Pressure DN1 DN2
AA200200AL A - A 17 bar DN050 DN050DA300200AL D - A 8,5 bar DN080 DN050DA400300AL D - A 6,5 bar DN100 DN080DD200200AL D - D 17 bar DN050 DN050
A-A (AA200200AL) D-A (DA300200AL) D (DD200200AL)
Weitere Größen und Kombinationen lieferbar. Other Sizes and Adapter available
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
V 2018 / 35
Vaterteil Typ A nach MIL A-A-59326A mit BSPP Innengewinde - PolypropylenMale Adapter type A - MIL A-A-59326A - female BSPP thread - Polypropylene
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadA050PP 8,5 bar DN020 1/2"A075PP 8,5 bar DN020 3/4"A100PP 8,5 bar DN025 1"A125PP 6,5 bar DN032 1"1/4
A150x125PP 6,5 bar DN040 1"1/4A150PP 6,5 bar DN040 1"1/2A200PP 6,5 bar DN050 2"A300PP 5 bar DN080 3"A400PP 5 bar DN100 4"
Mutterteil Typ C nach MIL A-A-59326A mit Stutzen für Schelleneinband - Polypropylen Female Coupler Type C - MIL A-A-59326A - with grooved hose-shank - Polypropylene
Artikel-Nr. Beschreibung Betriebsdruck Nennweite Stutzen DNPart-Nr. Description Working Pressure Dimension ShankC050PP
EPDM DichtungEPDM Gasket
8,5 bar DN020 13mm C075PP 8,5 bar DN020 21mmC100PP 8,5 bar DN025 27mmC125PP 6,5 bar DN032 34mm
C150x125PP 6,5 bar DN040 34mmC150PP 6,5 bar DN040 40mmC200PP 6,5 bar DN050 51mmC300PP 5 bar DN080 76mmC400PP 5 bar DN100 103mm
Mutterteil Typ B nach MIL A-A-59326A mit BSPT Aussengewinde - PolypropylenFemale Coupler type B - MIL A-A-59326A - male BSPT thread - Polypropylene
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadB050PP
EPDM DichtungEPDM Gasket
8,5 bar DN020 1/2"B075PP 8,5 bar DN020 3/4"B100PP 8,5 bar DN025 1"B125PP 6,5 bar DN032 1"1/4
B150x125PP 6,5 bar DN040 1"1/4B150PP 6,5 bar DN040 1"1/2B200PP 6,5 bar DN050 2"B300PP 5 bar DN080 3"B400PP 5 bar DN100 4"
auf Anfrage leitfähig lieferbar
conductive on request available
auf Anfrage leitfähig lieferbar
conductive on request available
auf Anfrage leitfähig lieferbar
conductive on request available
*ne
ue
s d
esi
Gn
**n
ew
de
siG
n*
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
36 / V 2018
Mutterteil Typ D nach MIL A-A-59326A mit BSPP Innengewinde - PolypropylenFemale Coupler type D - MIL A-A-59326A - female BSPP thread - Polypropylene
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadD050PP
EPDM DichtungEPDM Gasket
8,5 bar DN020 1/2"D075PP 8,5 bar DN020 3/4"D100PP 8,5 bar DN025 1"D125PP 6,5 bar DN032 1"1/4
D150x125PP 6,5 bar DN040 1"1/4D150PP 6,5 bar DN040 1"1/2D200PP 6,5 bar DN050 2"D300PP 5 bar DN080 3"D400PP 5 bar DN100 4"
Vaterteil Typ E nach MIL A-A-59326A mit Stutzen für Schelleneinband - PolypropylenMale Adapter type E - MIL A-A-59326A - with grooved hose-shank - Polypropylene
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension ShankE050PP 8,5 bar DN020 13mm E075PP 8,5 bar DN020 21mmE100PP 8,5 bar DN025 27mmE125PP 6,5 bar DN032 34mm
E150x125PP 6,5 bar DN040 34mmE150PP 6,5 bar DN040 40mmE200PP 6,5 bar DN050 51mmE300PP 5 bar DN080 76mmE400PP 5 bar DN100 103mm
Vaterteil Typ F nach MIL A-A-59326A mit BSPT Aussengewinde - PolypropylenMale Adapter type F - MIL A-A-59326A - male BSPT thread - Polypropylene
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadF050PP 8,5 bar DN020 1/2"F075PP 8,5 bar DN020 3/4"F100PP 8,5 bar DN025 1"F125PP 6,5 bar DN032 1"1/4
F150x125PP 6,5 bar DN040 1"1/4F150PP 6,5 bar DN040 1"1/2F200PP 6,5 bar DN050 2"F300PP 5 bar DN080 3"F400PP 5 bar DN100 4"
auf Anfrage leitfähig lieferbar
conductive on request available
auf Anfrage leitfähig lieferbar
conductive on request available
auf Anfrage leitfähig lieferbar
conductive on request available
Zubehör finden Sie auf Seite: 38Accessories on Page: 38!!!
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
V 2018 / 37
Stopfen Typ DP nach MIL A-A-59326A - PolypropylenDust plug type DP - MIL A-A-59326A - Polypropylene
Artikel-Nr. Beschreibung Betriebsdruck Nennweite GewindePart-Nr. Description Working Pressure Dimension ThreadDP075PP 8,5 bar DN020 3/4"DP100PP 8,5 bar DN025 1"DP125PP 6,5 bar DN032 1"1/4DP150PP 6,5 bar DN040 1"1/2DP200PP 6,5 bar DN050 2"DP300PP 5 bar DN080 3"DP400PP 5 bar DN100 4"
Kappe Typ DC nach MIL A-A-59326A - Polypropylen Dust cap type DC - MIL A-A-59326A - Polypropylene
Artikel-Nr. Beschreibung Betriebsdruck NennweitePart-Nr. Description Working Pressure Dimension DC075PP
EPDM DichtungEPDM Gasket
8,5 bar DN020DC100PP 8,5 bar DN025DC125PP 6,5 bar DN032DC150PP 6,5 bar DN040DC200PP 6,5 bar DN050DC300PP 5 bar DN080DC400PP 5 bar DN100
auf Anfrage leitfähig lieferbar
conductive on request available
auf Anfrage leitfähig lieferbar
conductive on request available
Mutterteil Typ C mit Stutzen für Klemmschaleneinband - elektrisch leitend ≤ 108 Ω - Polypropylen Female Coupler Type C - with shank and collar - conductive ≤ 108 Ω - Polypropylene
Artikel-Nr. Beschreibung Betriebsdruck Nennweite Stutzen DNPart-Nr. Description Working Pressure Dimension Shank
C075DINPP-R
EPDM DichtungEPDM Gasket
8,5 bar DN020 21mmC100DINPP-R 8,5 bar DN025 27mmC125DINPP-R 6,5 bar DN032 34mmC150DINPP-R 6,5 bar DN040 40mmC200DINPP-R 6,5 bar DN050 51mm
Vaterteil Typ E mit Stutzen für Klemmschaleneinband - elektrisch leitend ≤ 108 Ω - PolypropylenMale Adapter type E - with Smooth shank and collar - conductive ≤ 108 Ω - Polypropylene
Artikel-Nr. Beschreibung Betriebsdruck Nennweite StutzenPart-Nr. Description Working Pressure Dimension Shank
E075DINPP-R 8,5 bar DN020 21mmE100DINPP-R 8,5 bar DN025 27mmE125DINPP-R 6,5 bar DN032 34mmE150DINPP-R 6,5 bar DN040 40mmE200DINPP-R 6,5 bar DN050 51mm
Ausführung DIN - PP LEITFÄHIG MIL Ausführung auf Anfrage leitfähig lieferbarVersion DIN PP CONDUCTIVE conductive MIL Version on request available
!!!
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
38 / V 2018
Übergangsstück Kamlock Vaterteil auf IBC- Kupplung IG (Container) - PolypropylenAdapter C&G Male Typ to IBC buttress couplings Female Thread - polypropylene
Artikel-Nr. Kamlock VT IBC DichtungPart-Nr. C&G Male IBC Gasket
IBCF60A100 DN025 S60x6 TPEIBCF60A150 DN040 S60x6 TPE IBCF60A200 DN050 S60x6 TPEIBCF100A200 DN050 S100x8 TPE
Reparatur-Set für Kamlok (Hebel, Ring, Stift)Replacement handle includes ring and pin
Artikel-Nr. Material Dim 1 Dim 2Part-Nr. Material Dim 1 Dim 2CH75SS
Edelstahl Stainless Steel
1/2" 3/4"CH100SS 1"CH200SS 1"1/4 2"1/2CH300SS 3" 5"CH600SS 6"
CH100SS-MEdelstahl
Stainless Steel
1" 1"CH200SS-M 1"1/4 2"1/2CH300SS-M 3" 5"
CH75BR
MessingBrass
1/2" 3/4"CH100BR 1"CH200BR 1"1/4 2"1/2CH300BR 3" 5"CH600BR 6"
CH075SECURITYEdelstahl
Stainless Steel
3/4"CH100SECURITY 1"CH200SECURITY 1"1/4 2"1/2CH300SECURITY 3" 4"
ZubehörAccessories
Artikel-Nr. Zubehör MaterialPart-Nr. Accessories Material
36310 Kette mit S-HakenChain with S-Hook
Messing Brass
36310-SS Kette mit S-HakenChain with S-Hook
Edelstahl Stainless Steel
SS12CH Kette mit Ring Chain with Ring
Edelstahl Stainless Steel
CGP Sicherungsstift / Locking Pin
StahlSteel
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
V 2018 / 39
Dichtung für Kamlok Mutterteil KupplungGasket for Cam and Groove Female Coupling
Artikel-Nr. Beschreibung Material NennweitePart-Nr. Description Material Diameter
050B
NBR schwarz blaue Markierung
NBR blackblue Marking
NBR schwarz blaue Markierung
NBR blackblue Marking
DN015075B DN020100B DN025125B DN032150B DN040200B DN050250B DN065300B DN080400B DN100500B DN125600B DN150800B DN200
050E
EPDM schwarzweiße Markierung
EPDM blackwhite Marking
EPDM schwarzweiße Markierung
EPDM blackwhite Marking
DN015075E DN020100E DN025125E DN032150E DN040200E DN050250E DN065300E DN080400E DN100500E DN125600E DN150
050V
FKM (Viton®) schwarzgelbe Markierung
FKM (Viton®)black
yellow Marking
FKM (Viton®) schwarz
gelbe Markierung
FKM (Viton®)black
yellow Marking
DN015075V DN020100V DN025125V DN032150V DN040200V DN050250V DN065300V DN080400V DN100500V DN125600V DN150
050H
CSM (Hypalon®)grün
CSM (Hypalon®)green
CSM (Hypalon®)grün
CSM (Hypalon®)green
DN015075H DN020100H DN025125H DN032150H DN040200H DN050250H DN065300H DN080400H DN100
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
40 / V 2018
Dichtung für Kamlok KupplungPTFE gasket for Cam and Groove
Artikel-Nr. Beschreibung Material NennweitePart-Nr. Description Material Diameter
050TB
weißseitlich offen
whiteopen laterally
NBR/PTFE
NBR/PTFE
DN015075TB DN020100TB DN025125TB DN032150TB DN040200TB DN050250TB DN065300TB DN080400TB DN100
050TV
weißseitlich offen
whiteopen laterally
FKM(Viton®)/PTFE
FKM(Viton®)/PTFE
DN015075TV DN020100TV DN025125TV DN032150TV DN040200TV DN050250TV DN065300TV DN080400TV DN100
050TE
weißseitlich offen
whiteopen laterally
EPDM/PTFE
EPDM/PTFE
DN015075TE DN020100TE DN025125TE DN032150TE DN040200TE DN050250TE DN065300TE DN080400TE DN100
050FEP
rotummantelt
redsheathed
FEP (Silikonkern)
FEP (Silicone core)
DN015075FEP DN020100FEP DN025125FEP DN032150FEP DN040200FEP DN050300FEP DN080400FEP DN100
050E-FDA
weißFDA Zulassung
whiteFDA Confirm
EPDM
EPDM
DN015075E-FDA DN020100E-FDA DN025125E-FDA DN032150E-FDA DN040200E-FDA DN050250E-FDA DN065300E-FDA DN080
100S-FDArot
FDA Zulassung
redFDA Confirm
Silikon
Silicone
DN025125S-FDA DN032150S-FDA DN040200S-FDA DN050250S-FDA DN065300S-FDA DN080
Hebelarmaturen - KamloK / Cam & Groove CouplinGs
V 2018 / 41
Gewindedichtungen für Armaturen nach EN 14420Thread gasket for Couplings EN 14420 couplings
Artikel-Nr. Beschreibung Material NennweitePart-Nr. Description Material Diameter
SFPU13
Schwarz
Black
PU
PU
DN13SFPU19 DN19SFPU25 DN25SFPU32 DN32SFPU38 DN38SFPU50 DN50SFPU65 DN64SFPU80 DN75SFPU100 DN100
SFPU13B
Blau
Blue
PU
PU
DN13SFPU19B DN19SFPU25B DN25SFPU32B DN32SFPU38B DN38SFPU50B DN50SFPU65B DN64SFPU80B DN75SFPU100B DN100
SFPU13T
Transparent
Transparent
PU
PU
DN13SFPU19T DN19SFPU25T DN25SFPU32T DN32SFPU38T DN38SFPU50T DN50SFPU65T DN64SFPU80T DN75SFPU100T DN100
0.5TWTFG
weiß
white
PTFE - GF verstärkt
PTFE - GF reinforced
DN130.75TWTFG DN19
1TWTFG DN251.25TWTFG DN321.5TWTFG DN382TWTFG DN50
2.5TWTFG DN643TWTFG DN75
Schneekanonen - kamlok / Snow cannon cam & Groove
42 / V 2018
Mutterteil Kupplung für Schneekanonen - TüV geprüft - Edelstahl AISI 3164 Hebel, Ringe, Stifte, Sicherungsstifte und Ketten aus Edelstahl 304Female Coupling for Snow Cannon - TüV approved - Stainless Steel AISI 3164 Handles, rings, pins, safety pin and chain stainless steel 304
Artikel-Nr. Beschreibung Betriebsdruck Kupplung Gewinde/Stutzen
Part-Nr. Description Working Pressure Coupling Thread/Shank
SKM250IG200Typ D - BSP IGNBR Dichtung
Type D - BSP Female ThreadNBR Gasket
50 bar DN65 G 2"
SKM200IG200Typ D - BSP IGNBR Dichtung
Type D - BSP Female ThreadNBR Gasket
50 bar DN50 G 2"
SKM200P
Typ C mit Sicherungsbund zur Verpressung
NBR DichtungType C, with collar for crimp ferrule
NBR Gasket
50 bar DN50 S 2"
SKM200K
Typ C mit Sicherungsbund für Klemmschalen
NBR DichtungType C, with collar for safety
ClampsNBR Gasket
50 bar DN50 S 2"
SKM200S
Typ C mit Sicherungsbund für Schelleneinband
NBR DichtungType C, with collar for wire binding
NBR Gasket
50 bar DN50 S 2"
TüV zertifiziertTüV certified
TüV zertifiziertTüV certified
Schneekanonen - kamlok / Snow cannon cam & Groove
V 2018 / 43
Vaterteil Kupplung für Schneekanonen - Edelstahl AISI 316 Male Coupling for Snow cannon - Stainless Steel AISI 316
Artikel-Nr. Beschreibung Betriebsdruck Kupplung Gewinde/Stutzen
Part-Nr. Description Working Pressure Coupling Thread/Shank
SKV200IG200 Typ A - BSP IGType A - BSP Female Thread 50 bar DN50 G 2"
SKV200PTyp E mit Sicherungsbund zur
VerpressungType C, with collar for crimp ferrule
50 bar DN50 S 2"
SKV200KTyp E mit
Sicherungsbund für KlemmschalenType C, with collar for safety
clamps50 bar DN50 S 2"
SKV200S
Typ E mit Sicherungsbund für
SchelleneinbandType C, with collar for
wire binding
50 bar DN50 S 2"
Typ D - BSP IGType D - BSP Female
Thread
Typ E mit Haltekragen zur Verpressung
Type C, with collar for crimp ferrule
Typ E mit Haltekragen für Klemmschalen
Type C, with collar for safety clamps
Typ E mit Haltekragen für Schelleneinband
Type C, with collar for wire binding
Datenblatt / Data Sheet
44 / V 2018
1. die norM:
Die bereits im 19. Jahrhundert von H. Guido Storz entwickelte Armatur hat sich gerade im deutschsprachigen Raum zu einer Universalkupplung entwickelt. Dieses einfach zu handhabende symmetrische Kupplungssystem findet man heute in fast allen Bereichen, wobei die Feuerwehr und Bauindustrie sicherlich als Hauptabnehmer zu nennen sind.Man unterscheidet sie durch unterschiedliche „Knaggenabstände“. Einige NW sind auch mit Buchstaben wie z.B. D-Kupplung versehen zur besseren Identifikation.
1. tHe standard:
Mr. H. Guido Storz developed as early as in the 19th century an universal coupling system for the German speaking part of the world. This simple-to-handle system is still widely used all over the world, especially in the construction industry and in firefighting equipment. The Storz coupling is manufactured with unique cleats distances, and the parts are marked with for example “D” to help with identification of various types.
Die Armaturen entsprechen den entsprechenden DIN Normen (Kupplungsteil), die Industrieausführungen sind Gußteile und weisen eine geringere Festigkeit auf.
The couplings corresponds to the relevant DIN norm, and the industrial types are casted parts and have a lower strength.
• Druckkupplung (kurzer Stutzen): • pressure coupling (short hose end):
A: KA: 133 mm; Schlauch DI : 110 mm (DIN 14300) A: KA: 133 mm; Hose DI : 110 mm (DIN 14300)B: KA: 89 mm; Schlauch DI: 75 mm (DIN 14303) B: KA: 89 mm; Hose DI: 75 mm (DIN 14303)C52: KA: 66 mm; Schlauch DI : 52 mm (DIN 14302) C52: KA: 66 mm; Hose DI : 52 mm (DIN 14302)C42: KA: 66 mm; Schlauch DI: 42 mm (DIN 14332) C42: KA: 66 mm; Hose DI: 42 mm (DIN 14332)S32: KA: 66 mm; Schlauch DI : 32 mm (DIN 14330–1) S32: KA: 66 mm; Hose DI : 32 mm (DIN 14330–1)S28: KA: 66 mm; Schlauch DI : 28 mm (DIN 14330–2) S28: KA: 66 mm; Hose DI : 28 mm (DIN 14330–2)
• Saug- & Druckkupplung (langer Stutzen): • suction and pressure coupling (long hose end):
A: KA: 133 mm; Schlauch DI : 110 mm (DIN 14323) A: KA: 133 mm; Schlauch DI : 110 mm (DIN 14323)B: KA: 89 mm; Schlauch DI: 75 mm (DIN 14322) B: KA: 89 mm; Schlauch DI: 75 mm (DIN 14322)C: KA: 66 mm; Schlauch DI : 52 mm (DIN 14321) C: KA: 66 mm; Schlauch DI : 52 mm (DIN 14321)D: KA: 31 mm; Schlauch DI: 25 mm (DIN 14301) D: KA: 31 mm; Schlauch DI: 25 mm (DIN 14301).
2. betriebsdruCk 2. workinG pressureJe nach Ausführung zwischen 10 bar und 16 bar. Depending on the model between 10 bar and 16 bar.
Storz Knaggenabstand DN StutzenStorz Lug DN Hose-Shank25-D 31 55
32 44 6838 51 7845 59 88
52-C 66 9865 81 118
75-B 89 12690 105 144
100 115 156110-A 133 182125 148 196135 159 212150 160 215165 188 244205 220 280250 278 349