datasheet umh160r en 20160907 siling - ds › res › pdf › c019fff3801561f7.pdf · genlocking...

6
Introduction Key Features UMH160R is a powerful and cost-effective broadcast level decoder. It supports signal receiving, multi-channel descrambling, multiplexing, external table/data insertion, transcoding and transmodulating. It also supports MPEG-2/MPEG-4 SD/HD program decoding with two audio channels. With remote web-based management interfaces, it is ideal to support advanced content distribution, real-time signal conversion and transmission via an all-IP-headend system. RF inputs support multiple standards of signal receiving including DVB-S2/T2/C, ATSC and ISDB-T Supports ASI and TSIP inputs (mutual redundancy) Supports DVB-S2 multi-stream receiving (optional) Supports T2-MI transport stream decapsulation (optional) Supports Genlock signal input (optional) UMH160R SD/HD Receiver/Decoder +86-752-2760230 [email protected] www.wellav.com 160R-Base 160R-AD R-AUDIO2 L-AUDIO2 R-AUDIO1 L-AUDIO1 AES/EOU CVBS ASI IN ASI OUT RF OUT RF IN GPI/LS DATA CVBS OUT R-AUDIO1 R-AUDIO2 ASI OUT2 RF OUT2 RF IN2 RF OUT1 RF IN1 ASI IN2 GPI/LS DATA Receiving Two independent common interfaces support multi-channel descrambling, making the unit compliant with various popular CAM cards Embedded BISS-1 & BISS-E support TS & Service level descrambling VBI subtitle insertion from analogue video PSI/SI/PSIP processing and regeneration Supports TS & Service multiplexing Supports TS & EIT pass-through Data Processing

Upload: others

Post on 29-Jan-2021

2 views

Category:

Documents


0 download

TRANSCRIPT

  • Introduction

    Key Features

    UMH160R is a powerful and cost-effective broadcast level decoder. It supports signal receiving, multi-channel descrambling, multiplexing, external table/data insertion, transcoding and transmodulating. It also supports MPEG-2/MPEG-4 SD/HD program decoding with two audio channels. With remote web-based management interfaces, it is ideal to support advanced content distribution, real-time signal conversion and transmission via an all-IP-headend system.

    RF inputs support multiple standards of signal receiving including DVB-S2/T2/C, ATSC and ISDB-T

    Supports ASI and TSIP inputs (mutual redundancy)

    Supports DVB-S2 multi-stream receiving (optional)

    Supports T2-MI transport stream decapsulation (optional)

    Supports Genlock signal input (optional)

    UMH160RSD/HD Receiver/Decoder

    +86-752-2760230 [email protected] www.wellav.com

    160R-Base

    160R-AD

    R-AUDIO2

    L-AUDIO2

    R-AUDIO1

    L-AUDIO1

    AES/EOU

    CVBS ASI IN

    ASI OUT

    RF OUT RF IN

    GPI/LS DATA

    CVBS OUT R-AUDIO1 R-AUDIO2 ASI OUT2

    RF OUT2 RF IN2 RF OUT1 RF IN1

    ASI IN2GPI/LS DATA

    Receiving

    Two independent common interfaces support multi-channel descrambling, making the unit compliant with

    various popular CAM cards

    Embedded BISS-1 & BISS-E support TS & Service level descrambling

    VBI subtitle insertion from analogue video

    PSI/SI/PSIP processing and regeneration

    Supports TS & Service multiplexing

    Supports TS & EIT pass-through

    Data Processing

  • +86-752-2760230 [email protected] www.wellav.com

    Order Information

    Model DescriptionBase

    RL

    SDI

    IP

    AD

    IP-G

    TC2

    TC4

    QAM

    Receiving, decoding MPEG-2/4, HD&SD w/ A/V and 2ASI (In + Out)

    Base w/o ASI

    Base + 2 SDI (HD & SD output)

    Receiving, descrambling, HD&SD decoding, 4ASI (2In + 2Out), 2TSIP (In + Out) and SDI (Out)

    IP + multiplexing (2-tuner receiving)

    IP + Genlocking (Genlock signal input + SDI/CVBS output)

    IP + transcoding to MPEG-2 (4 SD programs)

    IP +transcoding to MPEG-4 (4 SD programs/2 HD programs)

    AD + QAM/OFDM modulator (4 for QAM or 2 for OFDM)

    MPEG-2 or MPEG-4 HD/SD video decoding

    HDMI, SD/HD SDI and CVBS output

    SDI output with 2 embedded audios

    1 audio decoding through AES/EBU digital audio output, 2 pairs of balanced and unbalanced analog audio output

    Multicast and unicast broadcasting in LAN and WAN network

    GPI alarm and cue tone output

    4-channel QAM or 2-channel OFDM output (optional)

    2-channel HD or 4-channel SD MPEG-2 to/from H.264 transcoding (optional)

    Output

    1 Ethernet 10/100Base-TX, RJ45

    Web-based NMS

    Front panel keypad and LCD

    SNMP supported for system integration

    Management

    UMH160RSD/HD Receiver/Decoder

  • Specifications

    DVB-S/S2 Input

    +86-752-2760230 [email protected] www.wellav.com

    1xRF (F-type, single input), 75Ω

    2xRF (F-type, dual input), 75Ω

    QPSK, 8PSK

    1~45 Mbps

    950~2150 MHz

    150Mbps

    -65~-25 dBm

    DC 13/18V@350mA

    22K on/off

    0.35, 0.25, 0.20

    16APSK

    CCM/VCM demodulation supported

    Multi-stream supported (single ISI)

    Roll-off factors:0.15, 0.10, 0.05

    Input

    Constellation

    Symbol Rate

    Input Frequency

    Max Bit-rate

    Signal Level

    LNB Power

    Control Tone

    Roll-off Factors

    Advanced Feature

    (via a simple hardware

    upgrade, optional)

    DVB-C Input1xRF (F-type, single input), 75Ω

    2xRF (F-type, dual input), 75Ω

    3.6~6.952 MBauds

    J.83 A/B/C

    48-862 MHz

    55Mbps

    40~80 dBuV

    Input

    Symbol Rate

    QAM Type

    Input Frequency Range

    Max Bit-rate

    Signal Level

    DVB-T2 Input1xRF (F-type, single input), 75Ω

    2xRF (F-type, dual input), 75Ω

    16/32/64/128/256QAM

    1.7MHz, 5MHz, 6MHz, 7MHz, 8MHz, 10MHz

    48~862 MHz

    50Mbps

    1K, 2K, 4K, 8K, 16K, 32K

    Input

    Constellation

    Bandwidth

    Input Frequency Range

    Max Bit-rate

    Transmission Mode

    ISDB-T/Tb Input 1xRF (F-type, single input), 75Ω

    2xRF (F-type, dual input), 75Ω

    QPSK/16/64QAM

    1.7MHz, 5MHz, 6MHz, 7MHz, 8MHz, 10MHz

    48~862 MHz

    6Mbps

    -75~-10 dBm

    1K-42K, 3K

    Input

    Constellation

    Bandwidth

    Input Frequency Range

    Max Bit-rate

    Signal Level

    Carriers Mode

    8VSB Input1xRF (F-type, single input), 75Ω

    6MHz

    57~803 MHz (fixed frequency)

    -83~-8 dBm

    Broadcast

    19.39Mbps

    Input

    Bandwidth

    Input Frequency Range

    Sensitivity

    Channel Plans

    Max Bit-rateDVB-T Input1xRF (F-type, single input), 75Ω

    2xRF (F-type, dual input), 75Ω

    QPSK/16/64QAM

    6/7/8M

    48~862 MHz

    31.67Mbps

    -75~-10 dBm

    2K, 8K

    Input

    Constellation

    Bandwidth

    Input Frequency Range

    Max Bit-rate

    Signal Level

    Transmission Mode

    UMH160RSD/HD Receiver/Decoder

    RF

  • UMH160RSD/HD Receiver/Decoder

    Specifications

    GbE IP

    +86-752-2760230 [email protected] www.wellav.com

    GbE level RJ45 port

    Up to 1000Mbps

    UDP & RTP (auto detection)

    Unicast: (ARP)

    Multicast: V2, V3 (optional)

    ProMPEG CoP3v2 (input)

    IPv4

    Version1, 2 & 3

    Interface

    Speed

    Package Format

    Traffic Type

    FEC

    TCP/IP Protocol

    IGMP

    DVB-ASI4 BNC, 75Ω (2xASI input, 2xASI output)

    100Mbps

    188/204 bytes

    Spread and burst

    Supports burst

    Interface

    Max Bit-rate

    Packet Type

    Input Mode

    Output Mode

    DVB-C ModulationITU-T J.83 Annex A/C, Annex B

    16/32/64/128/256QAM

    4.4~6.952 MBauds

    90~115 dBuV (depending on the channel numbers)

    48~862 MHz

    38

    Standard

    Constellation

    Symbol Rate

    Output Level

    Frequency Range

    EMR

    DVB-T ModulationETSI EN 300 744

    QPSK/16/64QAM

    2K, 8K

    6MHz, 7MHz, 8MHz

    90~115 dBuV (depending on the channel numbers)

    48~862 MHz

    Standard

    Constellation

    Carriers Mode

    Bandwidth

    Output Level

    Frequency Range

    Supports MPEG-2/H.264 SD/HD stream bypass transmission

    Supports AC-3/E-AC-3 audio bypass transmission

    TS/IP DVB-ASI

    DVB De-scrambling2 slots

    Max. 100Mbps

    NEOTION, SMIT, ASTON and other major CAMs

    CONAX, IRDETO, Novel-Super TV, CTI and other major CAS

    Program level, Decoded Service only

    TS level optional

    Limited by CAM

    DVB Common Interface

    Bit-rate

    CAM Supported

    CAS Supported

    BISS-1 & BISS-E

    Number of Services

    Output1 RF for 4-channel (DVB-C modulation, F-type, 75Ω)

    1 RF for 2-channel (DVB-T modulation, F-type, 75Ω)

    1 for RF monitor output (F-type, 75Ω)

    Interface

    DVB De-scrambling

    Interface1xBNC, 75Ω PAL/NTSC/SECAM

    1xBNC, 75Ω

    2xBNC, 75Ω (for model SDI)

    1xHDMI-type connector

    4xBNC,75Ω unbalanced

    4xXLR,600Ω balanced (for Base/RL/SDI models)

    1x15 Pin D-sub (4xXLR Breakout Cable, for

    IP/AD/IP-G/TC2/TC4/QAM models)

    1xBNC, 75Ω (for Base/RL/SDI models)

    1x15 Pin D-sub (1xBNC, Breakout Cable, for

    IP/AD/IP-G/TC2/TC4/QAM models)

    Composite Video Output

    SD/HD-SDI Output

    Digital Output

    Analog Audio Outputs

    AES/EBU

    Decoder

    RF Modulation

    (for IP/AD/IP-G/TC2/TC4/QAM models)

    (for model QAM)

  • UMH160RSD/HD Receiver/Decoder

    Video DecodingMPEG-2 SD 4:2:0 MP@ML

    MPEG-2 HD 4:2:0 MP@ML

    MPEG-4 AVC SD MP@L3

    MPEG-4 AVC HD [email protected]/[email protected]

    720x576i@25

    [email protected]

    1920x1080i@50,59,60

    1920x1080p@24,30

    1280x720p@50,59,60

    4:3 letterbox, 4:3 pan and scan, 16:9 pan and scan,

    anamorphic

    Video Profile/Levels

    Output Format

    Aspect Ratio

    Conversion

    Audio Decoding2

    MPEG1L2 & MPEG2L2

    Dolby Digital (AC-3)

    Dolby Digital Plus (E-AC-3)

    AAC (MPEG-2, MPEG-4/HE v1, 2, MPEG-4/LC)

    Linear PCM & Dolby E (pass-through)

    Digital pass-through

    PCM (down mixed for 5.1 Sources)

    Analog (down mixed for 5.1 Sources)

    2 audio pairs

    -63~0 dB

    Number of Audio Services

    Audio Codecs Supported

    Output Formats

    SDI Embedded Audio

    Output

    Adjustable Volume Level

    Decoder

    Specifications

    TS Transcoding

    +86-752-2760230 [email protected] www.wellav.com

    4 programsProcessing Channels

    Transcoding

    Genlocking

    InputH.264 (MPEG-4 part 10) or MPEG-2

    Up to 1080p30

    4:3, 16:9, auto

    MPEG-1 Layer I/II

    MPEG-2 Layer II

    Dolby Digital (AC-3) (optional)

    AAC (optional)

    Stereo, dual mono, single mono

    Video

    Video Format

    Aspect Ratio

    Audio

    Audio Mode

    Input1xBNC, Black Burst/tri-level syncGenlock Signal

    Output2xBNC, 75Ω

    1xBNC, 75Ω

    1xDB-15, 2 AES/EBU audios+2 pairs balance audios

    HD/SD SDI

    CVBS

    Audio

    Ancillary Data SupportClosed Captions (CEA-708)

    Line 21 Captions (CEA-608)

    SDI ANC Data

    SDI VBI Waveform

    OutputH.264 (MPEG-4 part 10) 4:2:0 MP@L4

    MPEG-2 4:2:0 MP@ML

    576i, 480i (BT.656)

    1080i50, 1080i60, 1080i59.94

    720P50, 720P60, 720P59.94

    MPEG-1 Layer-I/II

    AAC (optional)

    Pass-through

    MPEG-2 video: 2.0~15 Mbps (CBR & VBR)

    Audio: 64~384 Kbps

    H.264 Video: 1.0~20 Mbps (CBR & VBR)

    Audio: 64~384 Kbps

    -63~0 dBm

    Video

    Resolution

    Audio

    Subtitle and audio

    Bit-rate

    Adjustable Volume

    (for model TC2/TC4)

    (for model IP-G)

  • Physical & Environment100~240 VAC 50/60Hz

    Dual AC (via a hardware upgrade, optional)

    36~72 VDC (via a hardware upgrade, optional)

    1RU rack mount chassis

    485mm x 340mm x 45mm

    0℃~50℃

    -40℃~70℃

    < 95% (non-condensing)

    Power Supply

    Size

    Dimension

    Operating Temperature

    Storage Temperature

    Relative Operating

    Humidity

    UMH160RSD/HD Receiver/Decoder

    Specifications

    +86-752-2760230 [email protected] www.wellav.com

    ManagementRJ-45 10/100Mbps - auto negotiating

    HTTP and SNMP

    Full control via web GUI

    Front panel

    Full status via SNMP

    Configurable SNMP traps

    Via web GUI

    Connector

    Protocols

    User Interfaces

    Automation Interfaces

    Firmware Updates