Datasheet

www.grassvalley.com 1

The DXF-300 provides conversion to HDMI from 3G SDI over fiber or SMPTE ST 2022-6 over IP; perfect for multiviewer displays installed at distances of up to 10,000 meters (33,000 ft.) without any loss of signal integrity.

The DXF-300 HDMI converter solution from Grass Valley, a Belden Brand, provides conversion to an HDMI output from 3G SDI over fiber or SMPTE ST 2022-6 over IP, which enables viewing of 3G SDI or IP signals on a simple HDMI monitor.

The DXF-300 is the perfect solution for multiviewer display extension by allowing the interconnection of Kaleido-MX, KMX-3901 and KMX-4911 to HDMI dis-plays over distances of up to 10,000 meters (33,000 ft.), without any loss of signal integrity. The DXF-300 video transport over SMPTE ST 2022-6 IP delivers the benefits of routing and signal duplication using an IP network.

DXF-3003G SDI over Fiber to HDMI Converter / 10G IP to HDMI Converter

Used for smaller application (eg. powerpoint presentation)

www.grassvalley.com 2

KEY FEATURES

DXF-300 3G SDI over Fiber to HDMI Converter/10G IP to HDMI Converter

DXF-300-F-S Single channel HDMI display extender over single mode fiber at 1310 nm with LC/PC connector. Includes PSU, transmitter SFP and 2 meter (6.56 ft.) HDMI type D to type A cable

DXF-300-F-D Dual channel HDMI display extender over single mode fiber at 1310 nm with LC/PC connector. Includes PSUs, transmitter SFP and 2 meter (6.56 ft.) HDMI type D to type A cables

DXF-300-PSU-RED Redundant PSU for DXF-300-F or DXF-300-IP-RX. (2 required for DXF-300-F-D)

DXF-300-IP-RX* Single input SMPTE ST 2022-6 to HDMI receiver, 10GBASE-LR interface, multimode 850 nm, LC/PC connector. Includes PSU and 2 meter (6.56 ft.) HDMI type D to type A cable

DXF-300-RX 3G SDI over single mode fiber to HDMI converter at 1310 nm with LC/PC Connector

SFP-T-IP6-M85-LC* Single output SMPTE ST 2022-6 transmitter SFP, 10GBASE-LR interface, multimode 850 nm, LC/PC connector

SFP-TT-IP6-M85-LC* Dual output SMPTE ST 2022-6 transmitter SFP, 10GBASE-LR interface, multimode 850 nm, LC/PC connector

*Check for availability

ORDERING

HDMI OutputConnector: HDMI type D (2 meter/6.56 ft. HDMI type D to type A cable included)Signal: HDMI 1.4Format: 1920x1080p 50 Hz or 59.94 Hz

Transport IP850 nm multimode fiber with LC/PC connector SMPTE ST 2022-6 IP unicast or multicast with IGMPv3IEEE 802.3-2008 10 GigE interface

Transport 3G SDI over Fiber 1310 nm single mode fiber with LC/PC connectorSMPTE ST 297 serial digital fiber transmissionSMPTE ST 424 Level AFabry-Perot Laser at 1310 nm

PhysicalPower: 6W max. 100-240 VAC, 50/60 HzDimensions (approximate):

Width: 45 mm (1.8 in.)Height: 26 mm (1.0 in.)Depth: 75 mm (3.0 in.)

SPECIFICATIONS

• SMPTE ST 297 SDI fiber or SMPTE ST 2022-6 IP transport over fiber • HDMI output connector with mechanical retention for secure connec-

tion to the display • Extension distance up to 10,000 meters (33,000 ft.) using 3G SDI over

fiber

• Small form factor easily mountable at back of display• Available with redundant power supply

Applications

Display Extension Solutions for 3G SDI over Fiber

The DXF-300-F-S and the DXF-300-F-D offer display extensions for single or dual HDMI display outputs. Using the SFP output from the KMX-3901 or KMX-4911 rear panel, a fiber TX SFP is provided along with one or two fiber-to-HDMI converter(s).

Fiber

Fiber

Fiber

Fiber SFPSingle TX

Fiber SFPDual TX

DXF-300-RX

DXF-300-RX

DXF-300-RX

DXF-300-F-S single channel 3G SDI over fiber extension solution

DXF-300-F-D dual channel 3G SDI over fiber extension solution

KMX-4911

KMX-4911

WWW.GRASSVALLEY.COMJoin the Conversation at GrassValleyLive on Facebook, Twitter, YouTube and Grass Valley - A Belden Brand on LinkedIn.

3

DXF-300 3G SDI over Fiber to HDMI Converter/10G IP to HDMI Converter

Belden, Belden Sending All The Right Signals and the Belden logo are trademarks or registered trademarks of Belden Inc. or its affiliated companies in the United States and other jurisdictions. Grass Valley, GV Node and Kaleido are trademarks or registered trademarks of Grass Valley Canada. Belden Inc., Grass Valley Canada and other parties may also have trademark rights in other terms used herein.

Copyright © 2016-2017 Grass Valley Canada. All rights reserved. Specifications subject to change without notice.

GVB-1-0601C-EN-DS

Display Extension and Distribution Solutions for SMPTE ST 2022-6 IP Transport over Fiber

The DXF-300-IP-RX offers IP to HDMI conversion at the display for flexible extension and distribution of multiviewer outputs. Using the SFP output from the KMX-3901 or KMX-4911 rear panel, a single or dual IP encapsulator is used to provide single or dual multiviewer outputs over IP.

SMPTE ST 2022-6 IP SFP Single TX

SMPTE ST 2022-6 IP SFP Single TX

DXF-300-IP-RX

DXF-300-IP-RX

DXF-300-IP-RX

DXF-300-IP-RX

COTS IP Switch

COTS IP Switch

COTS IP Switch

SFP-T-IP6-M85-LC and a single DXF-300-IP-RX single channel IP distribution solution

GV Node multiviewer output distribution to DXF-300-IP-RX IP to HDMI conversion

SFP-TT-IP6-M85-LC and DXF-300-IP-RX dual channel IP distribution solution

KMX-4911

KMX-4911

GV Node provides direct IP multiviewer outputs from its built-in 40G QSFP aggregation ports. In this system, the multiviewer outputs are directly available over IP to be distributed to the displays. The DXF-300-IP-RX is used at the display to perform IP to HDMI conversion.

IFM-2T

16 x KMX-4911IP video inputs

via IFM-2T QSFPMultiviewer outputs via IFM-2T QSFP