data sheet cosmetics - inicio - canipec · j. rettenmaier & sÖhne fibers designed gmbh+co.kg...

J. RETTENMAIER & SÖHNE Fibers designedby NatureGMBH+CO.KG

RenewableAdditivesfor Cosmetics

Disclaimer:The information contained herein is meant to demonstrate how our products can be used. The given data are suggestions without any guarantee aimed to support customers development. As pro-duction conditions at our customers facilities are beyond our control we refuse to accept any liability involved in the use of our products. Please observe possible third party patent rights.

Contact:

J. RETTENMAIER & SÖHNE GMBH+CO.KGBusiness Unit InnovationsHarald Schlosser73494 Rosenberg (Germany)

Phone: +49 (0)7967 / 152 395Telefax:+49 (0)7967 / 152 500 [email protected]

08_0

50_G

B_V

1_0

.51204KE

Overview

Transparent Thickener3-D Fiber Network ThickenerStabilizer

StabilizerFine White Powder

Soft Peeling Additive

Film Forming Substance

VIVASTAR

VIVA RVIVA RVIVA RVIVAPURVIVAPURVITAVITAVITAVIVAPURVIVAPURVIVAPURVIVAPURVIVAPURVIVAVIVA

®

®

®

®

®

®

®

®

®

®

®

®

®

®

®

®

CS 302 SV

CS 052 WV

PU COS 5

PU COS 6

PU COS 8

CS 032 XV

CS 12 FM

CEL CS 20 FC

CEL CS 25 FC

CEL CS 25 FW

CS 100 S

CS 300 S

CS 400 S

CS 600 S

CS 800 S

PHARM CS 002 HV

PHARM CS 152 HV

VITACEL®

Survey of products

Survey of formulations

Transparent Styling GelTransparent Soft Skin FluidSkin Care CreamTransparent Facial Peeling GelMild ToothpasteNatural Skin Care Lotion

Dispersion 2%Natural Body Peeling CreamCream to Powder Compact FoundationDeo Roll On SensitiveFacial Peeling Cream

VIVAPUR CS 032 XV®




Contact:



Survey of productsTransparent Thickener

08_0

31_G

B_V

1_0

.51204KE

Natural origin. Renewable resources. Harmless.Basic raw material: corn

is a transparent thickener for multiphase systems like transparent gels, dispersions and emulsions.VIVASTAR®

Characteristics

Due to its neutral and inert character it can be used universally in practically any area of personal care and oral care withoutsensory interference.

Basics

VIVASTAR® : performs best with low shear activation and is the classic thickener for transparent gels and O/W-creams and lotions.

CS 302 SV

Grades

VIVASTAR® is easy-to-use. It swells after activation in water, increasing the viscosity and is working as a thickener.How grade worksVIVASTAR®

Transparent gel preparation:1.) dissolve inwater by stirring with lowstirring speed2.) apply low shear forces for approximately 15 minutes

VIVASTAR®

How to use VIVASTAR®

After activation with low shear forces, Sodium Carboxymethyl Starch forms a thick transparent gel.VIVASTAR®

How to use VIVASTAR®

Smooth. Non-tacky. Skin-friendly. Very comfortable skin feel.Skin feeling

Dosage

Preparation of emulsions:1.) add directly after the emulsification step prior

to homogenizing2.) while homogenizing thickening will occur

VIVASTAR®

Between 0.2 % and 3.0 %

Important parameter of VIVASTAR®

AppearanceViscosity

Loss on dryingCompatibility with ionsCompatibility with surfactantsCompatibility with alcoholThickeningDegree of substitutionINCI

VIVASTAR® CS 302 SV

fine odorless powder5000-10000 mPas (1.0 %)12000-17000 mPas (1.5 %)20000-30000 mPas (2.0 %)max. 10 %+++++ (up to 45 %)+++0.2 – 1.0Sodium Carboxymethyl Starch




Contact:



Survey of products3-D Fiber Network Thickener

Natural origin. Renewable resources. Harmless. Basic raw material: wheat.is a highly fibrillated wheat fiber and a 3-D fiber network thickener for multiphase systems like emulsions, dispersions,

suspensions and foams. is gluten-free, phytic acid-free and of course, GMO free.VITACEL

VITACEL

®

®

Characteristics


Basics

VITACEL® CS 052 WV: performs best with high shear activation and is the special 3-D network thickener for lotions and creams.Grades

The swells after water activation, increasing viscosity and building a 3-D fiber network. The structure of such a 3-D fibernetwork is helpful in maintaining an excellent thickening and fiber reinforcement.

suspensions and emulsions are independent of temperature, shearing rate, pressure or pH changes.

VITACEL

VITACEL

®

®

How grades workVITACEL®

1.) dissolve in water by stirring with high stirring speed2.) apply low shear forces for approximately 15 minutes3.) add non-ionic ingredients, stir lightly

VITACEL®

How to use VITACEL®

After activation with high shear forces, forms a 3-D fiber network. In appropriate concentration forms aninsoluble gel with viscoplastic and thixotropic properties and improves the reinforcement. The texture can vary from fluid tocohesive. is a composition of 70 % fibrillated wheat fiber and 30 % Maltodextrin.

VITACEL VITACEL

VITACEL

® ®

®

3-D fiber network thickener

Smooth. Non-tacky. Skin-friendly. Comfortable skin feel.Skin feeling

Dosage

4.) add ionic ingredients, stir lightly5.) adjust pH and/or sterilize as required


Important parameter of VITACEL®

AppearanceViscosityLoss on dryingCompatibility with ionsCompatibility with surfactantsCompatibility with alcoholThickening3-D fiber networkComposite agentINCI

VITACEL® CS 052 WV

fine odorless powder5000 mPas (2.0 %)max. 8 %++++++++++++MaltodextrinCellulose (and) Maltodextrin

20 nm

100 nm

100 nm

MacrofibrilleFibre

Microfibrille

08_0

39_G

B_V

1_0

.51204KE



Survey of products

Natural origin. Renewable resources. Harmless. Basic raw material: woodis a stabilizer for multiphase systems like emulsions, dispersions and foams.VIVAPUR®

Characteristics

Stabilizer

Due to its neutral and inert character it can be used universally in practically any area of personal care and oral care withoutsensory interference

Basics

VIVA RVIVA RVIVA R

PU COS 5

PU COS 6

PU COS 8

®

®

®

:::

Grades

The Microcrystalline Cellulose and Carboxymethylcellulose composite swells after activation in/with water, increasing the viscosity.The Microcrystalline Cellulose / Carboxymethylcellulose composite prevents insoluble particles from settling. This kind of networkstructure is important to maintain the stability of the suspension. suspensions and emulsions are independent oftemperature, shearing rate, pressure or pH changes.

VIVAPUR®

How grades workVIVAPUR®

1.) dissolve in water by stirring with high stirringspeed

2.) apply low shear forces for approximately 15 minutes

VIVAPUR®

How to use VIVAPUR®

After activation with high shear forces, Microcrystalline Cellulose particles form a network, which prevents insolubleingredients from settling or segregating. show a much higher resistance to electrolytes than polyacrylate based andsynthetic additives.

VIVAPURVIVAPUR

®

®

Stabilizer

Smooth. Non-tacky. Skin-friendly. Very comfortable skin feel. Velvet touch.Skin feeling

Dosage



Important parameter of VIVAPUR®

AppearanceViscosity after 30 secViscosity after 24 hLoss on dryingCompatibility with ionsCompatibility with surfactantsCompatibility with alcoholStabilization, gellingComposite agentINCI

VIVAPUR®COS 5

fine odorless powder40-100 mPas (1.2 %)1000-1500 mPas (1.2 %)max. 8 %+++++++++CarboxymethylcelluloseMicrocrystalline Cellulose(and) Carboxymethylcellulose

VIVAPUR®COS 6

fine odorless powder50-150 mPas (2.6 %)1500-2200 mPas (2.6 %)max. 8 %+++++++++CarboxymethylcelluloseMicrocrystalline Cellulose(and) Carboxymethylcellulose

VIVAPUR®COS 8

fine odorless powder2300-5600 mPas (2.6 %)5000-6000 mPas (2.6 %)max. 8 %++++++++++CarboxymethylcelluloseMicrocrystalline Cellulose(and) Carboxymethylcellulose

08_0

42_G

B_V

1_0

.51204KE

the multi-functional stabilizer especially for all kinds of W/O and O/W emulsionsfor personal care and oral care products


Contact:





Survey of products

Natural origin. Renewable resources. Harmless. Basic raw material: wood and Xanthen Gum.is a stabilizer for multiphase systems like emulsions, dispersions and foams.VIVAPUR®

Characteristics

Stabilizer


Basics

VIVA RPU CS 032 XV® : the multi-functional stabilizer especially for all kinds of W/O and O/W emulsionsfor personal care and oral care products

Grades

The Microcrystalline Cellulose and Xanthan Gum composite swells after activation in/with water, increasing the viscosity. TheMicrocrystalline Cellulose / Xanthan Gum composite prevents insoluble particles from settling. This kind of network structure isimportant to maintain the stability of the suspension. suspensions and emulsions are independent of temperature,shearing rate, pressure or pH changes.

VIVA RPU ®


1.) dissolve in water by stirring with high stirringspeed

2.) apply low shear forces for approximately 15 minutes

VIVA RPU ®

How to use VIVAPUR®

After activation with high shear forces, Microcrystalline Cellulose particles form a network, which prevents insolubleingredients from settling or segregating.

show a much higher resistance to electrolytes than polyacrylate based and synthetic additives.

VIVA R

VIVA R

PU

PU

®

®

Stabilizer

Smooth. Non-tacky. Skin-friendly. Very comfortable skin feel. Velvet touch.Skin feeling

Dosage




AppearanceViscosity after 30 secViscosity after 24 hLoss on dryingCompatibility with ionsCompatibility with surfactantsCompatibility with alcoholStabilization, gellingComposite agentINCI

VIVAPUR®CS 032 XV

fine odorless powder1500-4500 mPas (2.6 %)2000-5500 mPas (2.6 %)max. 8 %++++++++++Xanthan GumMicrocrystalline Cellulose (and) Xanthan Gum

08_0

45_G

B_V

1_0

.51204KE


Contact:





Survey of products

Natural origin. Renewable resources. Harmless. Basic raw material: wood/wheat.These grades are fine white powders with low specific density.

Characteristics

Fine White Powder


Basics

VIVAPURVITAVITAVITA

®

®

®

®

CS 12 FM

CEL CS 20 FC

CEL CS 25 FC

CEL CS 25 FW

: microcrystalline cellulose fiber from wood sources: cellulose fiber from wood sources: cellulose fiber from wood sources: cellulose fiber from wheat sources

Grades

VITACEL VIVAPUR

VITACEL VIVAPUR

® ®

® ®

and are a natural based highly pure cellulose/wheat fiber. It is chemically inert and insoluble in water.It is an excellent substitute to inorganic fine powders.

and are independent of temperature, shearing rate, pressure or pH changes.

How grades workthese

VITACEL VIVAPUR® ®and are of high chemical and microbialpurity. It´s biologically inert, insoluble in water, moisture andheat resistant, and it is based on renewable raw material.

Fine white powder

Non-tacky. Skin-friendly. Comfortable skin feel.Skin feeling

Dosage

08_0

40_G

B_V

1_0

.51204KE Between 1.0 % and 20 %

Important parameter of VIVAPUR and VITACEL® ®

Appearance

Particle sizeOil absorptionWater absorptionLoss on dryingColorBulk densityINCI

VIVAPUR®CS 12 FM

extremely finewhite powder12 µm1.7 g oil/g3.2 g water/gmax. 8 %white190 g/lMicrocrystallineCellulose

VITACEL® CS 20 FC

extremely finewhite powder20 µm1.9 g oil/g3.5 g water/gmax. 8 %white250 g/lCellulose

VITACEL® CS 25 FC

extremely finewhite powder25 µm3.7 g oil/g4.0 water/gmax. 8 %white230 g/lCellulose

VITACEL® CS 25 FW

extremely finewhite powder25 µm2.9 g oil/g3.9 g water/gmax. 8 %white240 g/lCellulose


Contact:





Survey of products

Natural origin. Renewable resources. Harmless. Basic raw material: woodis a soft and absolutely spherical peeling additive.VIVAPUR®

Characteristics

Soft Peeling Additive


Basics

VIVAPURVIVAPURVIVAPURVIVAPURVIVAPUR

®

®

®

®

®

CS 100 S:

CS 300 S:

CS 400 S:

CS 600 S:

CS 800 S:

spherical particle

Grades

They consist purely of Microcrystalline Cellulose which makes them the preferred, chemically inert and renewable soft peelingadditive. provides high mechanical robustness. Friability is negligible.Therefore, is excellent in soft peeling cosmetics.

is independent of temperature, gentle shearing rate, pressure or pH changes.

VIVA RVIVA R

VIVA R

PU

PU

PU

®

®

®


VIVA RPU ® is biologically inert, insoluble in water, moisture and heat resistant, rough surface and based on renewable raw material.Soft peeling additive

Natural peeling particles for soft and gentle skin cleansing. Skin-friendly.Skin feeling

DosageBetween 1.0 % and 25 %


AppearanceParticle sizeFriabilityLoss on dryingColorBulk densityINCI

VIVAPUR®CS 100 S

white spheres100 µm< 0.1 %max. 8 %white800 g/lMicrocrystallineCellulose

VIVAPUR®CS 300 S


VIVAPUR®CS 400 S


VIVAPUR®CS 600 S


VIVAPUR®CS 800 S


08_0

44_G

B_V

1_0

.51204KE


Contact:





Survey of products

Natural origin. Renewable resources. Harmless. Basic raw material: woodis a transparent film forming substance for multiphase systems like gels, dispersions and emulsions.VIVAPHARM®

Characteristics

Film Forming Additive


Basics

VIVAVIVA

PHARM CS 002 HV

PHARM CS 152 HV

®

®

: film-forming additive: film-forming additive

Grades

VIVAPHARM

VIVAPHARM

®

®

is easy-to-use. It is practically insoluble in hot water, in acetone and in ethanol. It dissolves in cold water giving acolloidal solution.

is independent of shearing rate, pressure or pH changes.

How grades workVIVAPHARM®

1.) use hot water2.) disperse with low shear forces for approximately 5 minutes3.) dissolve through cooling

VIVAPHARM®

How to use VIVAPHARM®

Easy-to-use. Very fast hydration. Improves foam quality, film forming substance, conditioning properties.Available without increasing the viscosity and with enhancing viscosity.

Film forming additive

Smooth. Non-tacky. Skin-friendly. Very comfortable skin feel.Skin feeling

DosageBetween 0.1 % and 3.0 %

Important parameter of VIVAPHARM®

AppearanceViscosityLoss on dryingCompatibility with ionsCompatibility with surfactantsCompatibility with alcoholThickeningINCI

VIVAPHARM®CS 002 HV

fine odorless powder50 mPas (2.0 %)max. 10 %++++++- - -Hydroxypropyl Methylcellulose

VIVAPHARM®CS 152 HV

fine odorless powder15000 mPas (2.0 %)max. 10 %+++++++Hydroxypropyl Methylcellulose

08_0

41_G

B_V

1_0

.51204KE


Contact:






Contact:




This high viscous gel is very pleasant to apply and leaves a smooth, non-tacky after feel.

CS 400 S and CS 800 S are natural peeling particles for soft and gentle skin

cleansing.

VIVAPUR VIVAPUR® ®

Premix phase B and add to phase A. Stir until clear. Add C while gentle stirring and stir with moderate speed until a clear andhomogenous gel is obtained. Add part D while stirring.

Manufacturing procedure

08_0

36_G

B_V

1_0

.51204KE

Formulation (R-8-10.4-312 and R-8-10.3-312)

Transparent Facial Peeling Gel

R-8-10.3-312

R-8-10.4-312

Raw material

Deionized waterDC Red No. 33 (0.1 % sol.)Cremophor RH 40Parf. Eternia Instant FS PCMF EcoSlicat MI 101.3-Propandiol (Zemea)VIVASTARVIVAPURVIVAPUR

®

®

®

CS 302 SV

CS 800 S

CS 400 S

INCI

AquaCI 17200PEG-40 Hydrogenated Castor OilParfumAqua, MethylisothiazolinonePropanediolSodium Carboxymethyl Starch

Microcrystalline Cellulose


Supplier

SensientBASFDüllbergSalicylatesDupont Tate&LyleJRS

JRS

JRS

%92.400.100.300.100.103.00

100.00

2.00

2.00

%92.400.100.300.100.103.00

100.00

2.00

2.00

Phase

A

B

CD

Specification

AppearancepH-valueViscosity(Brookfield: spindle 6, speed 10 rpm)Stability: 20 °C, 40 °C, 4 °C

Transparent Facial Peeling Gel

Light pink clear gel with whiteparticles5.860000 mPasStable for more than 3 months




Contact:




This low viscous gel leaves a smooth, non-tacky after feel on skin.

Premix phase B and add to phase A. Stir until clear. Add C while gentle stirring and stir with moderate speed until a clear andhomogenous gel is obtained.


08_0

37_G

B_V

1_0

.51204KE

Transparent Soft Skin Fluid

Formulation (R10-1-312)Raw material

Deionized waterDragocolor Chinolingelb watersoluble,E104 (0.1 % sol.)Dragocolor Patenblau V 80 % (0.1 % sol.)Cremophor RH40Parf. Nat Zitronengras-PistazienmilchPO 0250476Salicat MI101.3-Propandiol (Zemea)VIVASTAR® CS 302 SV

INCI

AquaCI 47005

CI 42051PEG-40 Hydragenated Castor OilParfum, Citral, Limone

Aqua, MethylisothiazolinonePropanediolSodium Carboxymethyl Starch

Supplier

Symrise

SymriseBASFFrey&Lau

SalicylatesDupont Tate&LyleJRS

%

100.00

95.500.20

0.050.300.10

0.103.000.75

Phase

A

B

C

Specification


Transparent Soft Skin Fluid

Light green clear gel5.648000 mPas

Stable for more than 3 months




Contact:




08_0

35_G

B_V

1_0

.51204KE

Skin Care Cream

This smooth cream is very pleasant to apply and leaves a rich, non-tacky and very comfortable skin feel.

CS 302 SV gives stability and a smooth and velvet touch.VIVASTAR®

Formulation (R7-1-312)Phase

A

A1B

CD

Heat phase A to 80 °C. Add and dissolve A1 while stirring. Heat phase B to 75 °C. Add B to A while stirring. Add part C andhomogenize until a homogenous emulsion is obtained. Cool down to room temperature while stirring. Add part D below 40 °C.


Specification


Skin Care Cream

White viscous cream551000 mPas


Raw material

Deionized waterGlycerin 85 %Amphisol KSoftisanMango Butter (Lipex 203)Palmester 3585Alphaflow 30Kalcol 6850Xiameter PMX-200 fluid (100cs)

Verstatil PCParf. Sissy PCMf 208 900


INCI

AquaGlycerinPotassium Cetyl PhosphateHydrogenated Coco-GlyceridesMangifera Inica (Mango) Seed butterCaprylic/Capric TriglycerideHydrogenated PolydeceneCetearyl AlcoholDimethicone

Phenoxyethanol, Caprylyl GlycolParfum

Sodium Carboxymethyl Starch

Supplier

MerckCrodaSasolAAKKLKCreations CouleursKAODow Corning

Dr. StraetmansDüllberg

% Oilphase

JRS

%

100.00

71.103.002.002.002.00

10.005.002.000.20

1.000.20

23.20

1.50




Contact:



Specification


Transparent Styling Gel

Blue clear gel5.8660000 mPas



A

B

C

Raw material

Deionized waterDragocolor Patenblau V80 % (0.1 % sol.)Cremophor RH 40Parf. Bingo RedSalicat MI 101.3-Propandiol (Zemea)VIVASTAR® CS 302 SV

INCI

AquaCI 42051PEG-40 Hydrogenated Castor OilParfumAqua, MethylisothiazolinonePropanediolSodium Carboxymethyl Starch

Supplier

SymriseBASFFrey&LauSalicylatesDupont, Tate&LyleJRS

%

100.00

94.400.100.300.100.103.002.00

Premix phase B and add to phase A. Stir until clear. Add C while gentle stirring and stir with moderate speed until a clear andhomogenous gel is obtained.


08_0

38_G

B_V

1_0

.51204KE


This high viscous gel has comfortable application properties on hair and leaves a non-tacky after feel.

Transparent Styling Gel




Contact:




,This smooth toothpaste has mild but for all that effective cleansing power.

Thickening results from CS 302 SV which is a cost effective alternative to traditionally used

silica grades.

CS 032 XV supports suspension and stability.

VIVASTAR

VIVAPUR

®

®

Specification


Mild Toothpaste

White paste6.1592000 mPas


Formulation (R5-1-312)Raw material

Deionized water

Meritol 161Stevia PowderTitanium DioxideZeodent 113

Dermofeel G10 LWToothpaste aroma natural PO120177

VIVAPUR® CS 032 XV


INCI

Aqua

Sorbitol (70%)Stevia Rebaudiana ExtractTitanium Dioxide CI 77891Hydrated Silica(medium cleaning, low thickening)

Polyglyceryl-10 Laurate, AquaAroma, Limonene

Microcrystalline Cellulose, Xanthan Gum

Sodium Carboxymethyl Starch

Supplier

SyralRaab Vitalfood

Huber

Dr. StraetmansFrey&Lau

JRS

JRS

%

100.00

40.000.201.00

14.00

1.000.50

39.302.00

2.00

Heat phase A to 45 °C. Add and dissolve A1 while stirring at 2000 rpm for 10 minutes. Add and dissolve ingredients of phase B ingiven order. Stir until homogenous without any particles left. Add part C while stirring and stir until a homogenous paste is obtained.Add ingredients of phase D. Cool to room temperature while stirring.


Mild Toothpaste

08_0

32_G

B_V

1_0

.51204KE

Phase

A1

A

B

CD




Contact:




This smooth lotion leaves a non-tacky and very comfortable skin feel.

CS 032 XV supports stability and a smooth and velvet touch.VIVAPUR®

Add A1 to A (80 °C) while stirring. Homogenize for 1 minute at 8000-10000 rpm (Ultra Turrax). Add A2 while stirring and keeptemperature at 75-78 °C. Heat phase B to 75 °C. Add B to A while stirring. Homogenize. Cool down to room temperature whilestirring. Add part C below 40 °C.


08_0

34_G

B_V

1_0

.51204KE

Natural Skin Care Lotion


AA1

A2

B

C

Raw material

Deionized water

Dermosoft 1388 ECO

Symbiomuls GC

Avocado oilThistle oilCermofeel SensolvParf. Natco Rose, Lavender,Rosehip PO 250205

VIVAPUR® CS 032 XV

INCI

Aqua

Glycerin, Aqua, Sod. Laevulinate,Sod. Anisate5% Glyceryl Caprylate45% Cetearyl Alcohol50% Glyceryl Stearate CitratePersea Gratissima (Avocado) OilCarthamus tinctorius (safflower) seed OilIsoamyl LaurateParfum

Microcrystalline Cellulose,

Xanthan Gum

Supplier

Dr. Straetmans

Dr. Streatmans

Dr. StraetmansFrey&Lau

JRS

%

100.00

78.70

3.00

4.00

2.004.006.000.30

2.00

Specification


Natural Skin Care Lotion

Light yellow emulsion5.323000 mPas





This is a smooth and non-tacky gel with an excellent skin feeling.

SpecificationVIVAPUR® CS 032 XV Dispersion 2%

White dispersion6.13500 mPas



AA1B

Raw material

Deionized water

Salicat MI 101.3-Propandiol (Zemea)

VIVAPUR® CS 032 XV

INCI

Aqua

Aqua, MethylisothiazolinonePropanediol

Microcrystalline Cellulose, Xanthan Gum

Supplier

SalicylatesDupont Tate&Lyle

JRS

%

100.00

94.90

0.103.00

2.00

Add A1 to A at room temperature while stirring. Homogenize for 1-2 minutes at 8000-10000 rpm (Ultra Turrax). Add ingredients ofB while stirring.


VIVAPUR CS XV, Dispersion %032 2®

08_0

43_G

B_V

1_0

.51204KE



Contact:






Contact:




This smoothcream-peeling is verypleasant to applyand leaves anon-tackyandvery comfortable skin feel.

CS 032 XV supports stability and a smooth and velvet touch.

CS 600 S are natural peeling particles for soft and gentle skin cleansing.

VIVAPURVIVAPUR

®

®

Heat phase A up to 80 °C. Add and dissolve A1 while stirring. Homogenize at 8000-10000 upm for 1 to 2 minutes. Add anddissolve part A2 and keep temperature at 75 °C. Heat phase B to 75 °C. Add B to A while stirring. Homogenize.Cool down to room-temperature while stirring. Add part C below 40 °C.


08_0

33_G

B_V

1_0

.51204KE

Natural Body Peeling Cream


AA1

A2

B

C

Raw material

Deionized water

Dermosoft 1388

Emullium Kappa(2)

Lanette OJojoba oilEutanol GSunflower oil ref.Dermosoft GMCYDermofeel G10 LWParf. Natco Sweet Peach PO 250192

VIVAPUR

VIVASTAR

®

®

CS 032 XV

CS 600 S

INCI

Aqua

Glycerin, Aqua, Sod. Laevulinate,Sod. AnisateCandelilla/Jojoba/Rice BranPolyglyderyl-3 Esters,Glyceryl Stearate, Cetaearyl Alcohol,Sodium Stearoyl LactylateCetearyl AlcoholSimmondsia Chinensis Seed OilOctyldodecanolHelianthus Annuus Seed OilGlyceryl CaprylatePolyglyceryl-10 Laurate, AquaParfum

Microcrystalline Cellulose,

Xanthan Gum


Supplier

Dr. Straetmans

Gattefossé

Cognis

Cognis

Dr. StraetmansDr. StraetmansFrey&Lau

% Oilphase

JRS

JRS

%

100.00

63.90

3.00

6.00

2.003.004.005.000.301.000.30

20.00

1.50

10.00

Specification


Natural Body Peeling Cream

Apricot-colored cream5.431000 mPas





Contact:




This creamy makeup compact foundation shows quick absorption and has a non-greasy, silky-powdery

after feel.

CS 12 CM is a natural functional filler with a smooth and velvet touch.

CS 12 CM provides mattifying, sebum absorption and soft-focus-effect besides a smooth and

velvet touch.

How to apply: Compact foundations are usually applied with a sponge. For test purposes fingers may be

used.

VIVAPURVIVAPUR

®

®

Specification

AppearanceStability: 20 °C, 40 °C, 4 °C

Cream to Powder Makeup Foundation

Light brown pasteStable for more than 3 months

Heat phase A to 82 °C. Premix and grind phase B and add to phase A while stirring. Remove remaining air by using a weak vacuumor keep temperature while stirring gently for 15 minutes. Cool to 75 °C. Add and dissolve ingredients of phase C and pour intomoulds.


08_0

47_G

B_V

1_0

.51204KE

Formulation (R13-1-312)

Phase

A

B

C

Raw material

Tegosoft ACPassions Fruit OilSqualane, veg. gradeSalacos P8Nomcort TQ-5Microwax 1899Kahlwax 6607Titandioxid Kronos 1171Sicovit Yellow 1 ESicovit Red 30ESicovit Brown 70ESicovit Black 80E

Ronaflair SoftshadeDC Xiameter PMX 1184Dermosoft GMCYParfum Atalante Y

VIVAPUR® CS 12 FM

INCI

Isoamyl CocoatePassiflora Edulis Seed OilSqualaneEthylhexyl PalmitateTrehalose Isostearate EstersOzokeriteHelianthus Annuus Seed WaxCI 77891CI 77492CI 77491CI 77491, CI 77492, CI 77499CI 77499

CI 77891, Silica, Mica, AluminaDimethicone, TrisiloxaneGlyceryl CaprylateParfum


Supplier

EvonikBeraca

KowaKowaKahlKahlKronosRockwoodRockwoodRockwoodRockwood

MerckDow CorningDr. StraetmansCosnaderm

JRS

%

100.00

29.503.004.00

10.001.002.004.00

12.001.000.300.600.20

2.009.001.000.40

20.00

Cream to Powder Makeup Foundation




Contact:




This clear Deo Roll On gel is cold processable, easy to apply and leaves a smooth, non-tacky after feel

on skin.

Add slowly to water of phase A at room temperature using high speed mixing. To avoid foaming usevaccum. Stir until clear and free of particles. Premix phase B and add to A little by little. Stir until clear.

VIVAPHARM® CS 152 HV


08_0

46_G

B_V

1_0

.51204KE


A

B

Raw material

Deionized water

1.3-Propandiol (Zemea)Sensiden DO

Salicat MI 10

Dermofeel TEC ecoPurasal S7HQ50

VIVAPHARM® CS 152 HV

INCI

Aqua

PropanediolPropylene Glycol, Ethylhexylglycerin,Octenidine HCLAqua, Methylisothiazolinone

Triethyl CitrateSodium Lactate

Hydroxypropyl Methylcellulose

Supplier

Dupont Tate&LyleSchülke&Mayr

Salicylates/BiesterfeldDr. StraetmansPurac

JRS

%

100.00

92.65

2.000.50

0.10

2.001.75

1.00

Deo Roll On Sensitive

Specification


Deo Roll On Sensitive

Clear, colorless gel4.71500 mPas





Contact:




08_0

48_G

B_V

1_0

.51204KE

Facial Peeling Cream

This high viscous cream is very pleasant to apply and leaves a smooth, non-tacky after feel.

CS 052 WV is a natural highly fibrillated cellulose with a smooth touch.

CS 400 S are natural peeling particles for soft and gentle skin cleansing.

VITACELVIVAPUR

®

®

Formulation (PCZ)Phase

A

B

C

DE

Raw material

Phytrox APCutina GMS-SEMyritol 318Lanette OMontanov 14Zea Mays OilDermosoft GMCYMicrocare SB45Deionized waterPricerine 9091

Homeostatine

Bioxan EMicrocare BNAPowerapple

VITACEL®CS 052 WV

CS 400 SVIVAPUR®

INCI

Ascorbyl PalmitateGlyceryl Stearate SECaprylic/Capric TriglycerideCetearyl AlcoholMyristyl Alcohol, Myristyl GlucosideZea Mays OilGlyceryl CaprylatePotassium Sorbate, Sodium BenzoateAquaGlycerin

Water, Glycerin, Caesalpinia SpinosaGum, Enteromorpha compressa extract,Sodium Benzoate, Potassium Sorbate

TocopherolBenzyl AlcoholParfum

Cellulose (and) Maltodextrin


Supplier

Jan Dekker B.V.CognisCognisCognisSeppic

Dr. StraetmansThor

Croda Europe

Provital

Biotech-nologias A.ThorDrom

JRS

JRS

%

100.00

0.204.005.001.501.505.000.250.70

67.355.00

5.00

0.200.500.30

1.50

2.00

Disperse and Xanthan Gum using an Ultra Turrax in phase B at 75 °C for 10 minutes. Add oil phase A at 75 °Cto phase B. Emulsify phase A into phase B under stirring. Homogenize for 5 minutes using an Ultra Turrax. Cool down to 35 °C understirring and add phase C and then phase D. Cool down to 30 °C under slow stirring and add phase E. Adjust pH value if it isnecessary with citric acid.

VITACEL® CS 052 WV


Specification


Facial Peeling Cream Shinywhite emulsion4.865000 mPas


data sheet cosmetics - inicio - canipec · j. rettenmaier & sÖhne fibers designed gmbh+co.kg...

Documents