V1.02012-05-16

UPGRADE PROCEDURE

150Mbps Wireless ADSL2/2+ Broadband Router

DG-BG4011N

Copyright © 2012. All rights reserved.Company has an on-going policy of upgrading its products and it may be possible that information in this document is not up-to-date.Please check with your local distributors for the latest information.No part of this document can be copied or reproduced in any form without written consent from the company.

Trademarks:TMDIGISOL is a trademark of Smartlink Network Systems Ltd. All other

trademarks are the property of the respective manufacturers.

Know Your Routers Hardware Version

The Hardware Version is mentioned on a Sticker at the bottom of your ADSL router. Please refer the below image to know your routers Hardware Version:

If the hardware version of the router is A1, then on sticker it will be written as “H/W: A1" (as highlighted in the above image).

If there is no such sticker on the router, then your router belongs to first revision (A) hardware version.

Click Here for upgrade procedure for Hardware Version A1

Click Here for upgrade procedure for first revision Hardware Version

Upgrade Procedure For Hardware Version A1

Download and store the firmware “Gan9.8U17-4-SI-R5B050-IN.EN_1T1RP” on your system.

Change the System Date of the machine from which you wish to upgrade the firmware. The Date of the system should be set to “14th May 2012" or earlier.

Now login to the router using its LAN IP “http://192.168.1.1".

The default username and password is ‘admin’

Click on “Management” on top and then “Firmware Update” on the left hand side.

Click on “Browse” to select the firmware upgrade file as shown in below figure.

Click on “Update Firmware” for upgrading the firmware on the router.

Important Note: PLEASE DO NOT TURN OFF THE ROUTER OR REMOVE/DISCONNECT ETHERNET CABLE, Please ensure that the power Adapter and ethernet link with the router is connected propelry , Any disconnection during firmware upgrade might corrupt the firmware on router and make it un usable.

The firmware upgrade process will be initiated.

Once the firmware upgrade is complete then the Login Page of the router will appear. Login to the router and change the System Date to the Present Date.

You should now be able to Browse the Advanced configuration of the router with the present date on the system.

Upgrade Procedure For First Revision Hardware Version

Download and store the firmware “GAN9.3Z56U-B-SI-R5B028-IN.EN(1TIR)P” on your system.

Change the System Date of the machine from which you wish to upgrade the firmware. The Date of the system should be set to “14th May 2012" or earlier.

Now login to the router using its LAN IP “http://192.168.1.1".

The default username and password is ‘admin’

Click on “Management” on top and then “Firmware Update” on the left hand side.

Click on “Browse” to select the firmware upgrade file as shown in below figure.

Click on “Update Firmware” for upgrading the firmware on the router.

Important Note: PLEASE DO NOT TURN OFF THE ROUTER OR REMOVE/DISCONNECT ETHERNET CABLE, Please ensure that the power Adapter and ethernet link with the router is connected propelry , Any disconnection during firmware upgrade might corrupt the firmware on router and make it un usable.

The firmware upgrade process will be initiated.

Once the firmware upgrade is complete then the Login Page of the router will appear. Login to the router and change the System Date to the Present Date.

You should now be able to Browse the Advanced configuration of the router with the present date on the system.