Daqin Mobile Phone Sticker Machine Daqin, the global leader of mobile phone sticker machine, had been developed a professional solution

especially for producing custom mobile phone sticker for any brand and model mobile phone in the

world since 2002. It is for commercial purpose use. You can start your own business of selling custom

mobile phone stickers with this powerful system.

Below the making process of phone stickers of iPhone 5:

The Daqin mobile phone

sticker machine is actually not

refers to a specific one

machine, but a series of

software and machines

combine together. The whole

system contains the Design

Software, Printer, Laminator

and Cutter. Also, the raw

materials of making mobile

phone stickers are needed,

such as the printing design films

and lamination effect films.

The most important one is the

design software, which contains

more than 3,000 cutting

templates for mobile phones all around the world and more than 5,000 design drawings. All the mobile

phone sticker cutting templates are created by Daqin staffs based on multiple times test on original

mobile phones. The cutting templates are highly accurate and 100% match with corresponding mobile

phones.

Select your ideal model of mobile phone, then the corresponding templates will be displayed in the

editing area. You can upload your own design picture to make the custom stickers, or you can use the

original design picture in the data base.

Once the design process is done, now we can click the print button in the software, and then the printer

will print out the design on an A4 size blank printing design film. The printer is 6 colors inkjet printer can

provide better printing effects than any other 4 colors inkjet printer.

When the printing process is done, we can take an A4 size sheet of lamination effect film, such as a

glossy one, and then laminate it on the well-printed film by the laminator. The laminator is with 4 rollers

which can effectively avoid bubble during the lamination process. The lamination film can make the

sticker becomes waterproof and anti-scratch.

Finally let’s go to the cutting process. Put the well-laminated film into the cutter, and then click cut

button in the software. Within 1 minute the mobile phone sticker will come out. Then it’s time to peel it

off from the backing paper, and then manually apply it on the back, sides and front of the mobile phone.

Don’t worry, if you mistakenly apply it on the mobile cover, the sticker can be easily peel off and then

apply again without leaving any residue on the cover.