daisypool covers & rollers

DaisySaves

UTC100

Installing

UTC, Buddy Roller

& connecting

a Daisy Cover

The quick and easy way to assemble a roller and pool cover.

UTC75

Buddy

utc

Centre assembled roller to pool

Install eyelets.

Secure cord to cover and roller.

Repeat for all cord attachments.

Adjust the cords

Daisy Covers and Rollers are designed to work together smoothly.

Please retain proof of purchase daisypool covers & rollers

www.daisypoolcovers.com.au

Installation ProcedureUTC 100/75Buddy RollerUTC Above Ground

TubeEnd SlugHandwheelLeg

RollerfootAntiskid Plug

Endplug

UTC

Eyelet Feather Plug

Female

Male

Above Ground Kit

Leg

Bush

Bracket

Screws

Buddy

TubePinYokeCrankRollerfootAntiskid Plug

Eyelet Feather Plug

Female

Male

Folded flapto roll up

Pool blanket

Roller & Tube

Cord

StrapEyelet

Roller Kit IncludesOne Tube Kit3 X tubes: 2 one size, 1 JoinerTwo Handwheels or handlesTwo End FramesTwo End SlugsTwelve ScrewsTwo End PlugsOne OverCover Kit

1 X Overcover Sheet, 2 Xstretch straps, 6 X white eye-letsCover Connection KitTen EyeletsTen male / Ten femaleOne Eyelet PunchTen Feather PlugsTen 2metre Cords

Equipment Needed� Rubber Mallet� Philips Screwdriver� Block of wood(for hole punching)� Drill - cordless if workingaround pool water.� Hammer

Locate roller at opposite end of extended area - Fold over to roll up.

OverCover must be on rolled up Daisy Pool Cover for UV protection.

Step 2-Slide handwheel onto end slug

Frames connect to Rollerfoot or Bracket for Above Ground Kit.

How to put your overcover together

Always use your overcover when your cover is rolledup onto your roller and off the pool water.