dac-ff the ultimate fibre-to-fibre channel external raid controller solution for high performance...

19
DAC-FF DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

Upload: logan-craig

Post on 30-Dec-2015

220 views

Category:

Documents


1 download

TRANSCRIPT

Page 1: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

DAC-FFDAC-FFThe Ultimate Fibre-to-Fibre Channel External RAID

Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

Page 2: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

3PP250299.ppt

DAC-FF -DAC-FF - Technology Technology

2 Fibre Channels to Host2 Fibre Channels to Host 4 Fibre Channels to Drives4 Fibre Channels to Drives

100MHz RISC Processor100MHz RISC Processor256MB ECC Cache256MB ECC Cache

Page 3: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

4PP250299.ppt

TechnologyTechnology Fibre Technology

Fibre Channel Host connectivity Data Transfer rates of 100MB/s per channel over a 30 Meter

serial link Distances of several kilometers via Fibre Hubs and switches Fibre Channel Drive connectivity 4 Channels for up to 500 drives; storage: 25.0 Terabytes

Guaranteed Performance Dedicated XOR/ Cache controller Up to 256 MB ECC protected User Data Cache Burst Cache Transfer rate: over 190 MB/s

Proven system architecture RISC processor -- 100 MHz i960RN Common Management software

Page 4: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

5PP250299.ppt

ArchitectureArchitecture

PCI Bus 0

32 - 256 MBSDRAM

i960 RISCProcessor

FCIOP

FCIOP

FCIOP

North Bay

FCIOP

16 MB DRAM

FCIOP

FCIOP

PCI Bus 1

Page 5: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

6PP250299.ppt

HardwareHardware

RISC Processors (i960RN 100MHz)

Firmware: 2MB Flash EEPROM

Up to 256 MB ECC Data Cache Dual 64 bit PCI Bus design 5 1/4” form factor

2 Copper FC-AL host channels Burst cache transfer rates: Over

190 MB/s 4 Fibre Channel drive channels Up to 125 devices per Fibre

channel - 500 devices per controller

Up to 25.0TB (Seagate 50GB drives) capacity per controller

DAC-FF:

Page 6: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

7PP250299.ppt

BoardBoard

256 MB ECC cache

RISC Processors (i960RN)

XOR engine

4 FC-AL channels( to Drives)

2 FC-AL channels( to Host)

DACFF

Page 7: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

8PP250299.ppt

RAID 0, 1, 0+1, 3, 5, 10, 30, 50 and JBOD Write Through and Write back or read-ahead support Active/Active ----- Failover/Failback for High Availability Variable Stripe size per controller Variable Cache Line size per controller Mirrored Cache for Data Integrity Clustering Support

Windows NT, UNIX, SCO UNIX, NetWare

Designed to fit in an Industry standard 5 1/4” half-height form factor

DAC-FF FeaturesDAC-FF Features

Page 8: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

9PP250299.ppt

Advanced RAID FeaturesAdvanced RAID Features

Fault Tolerance: Automatic detection of Failed drives

Automatic and transparent re-build of replacement drive

On-line RAID expansion

Hot Spare drive support

Hot Drive Swapping support

SAF-TE and SES enclosure management

RAID configuration stored on disk and NVRAM

Add a LUN; Expand a LUN

DAC-FF

Page 9: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

10PP250299.ppt

Simplex Performance and CapacitySimplex Performance and Capacity Performance

SX SF FL FFBurst IO’s Per Second 1,800 4,100 4,100 5,800Burst (cache) Bandwidth (MB/s) 45 97 97 190Sustained (disk) Bandwidth (MB/s) 30 52 52 190

Note: Sequential read performance, small blocks, no coalescing driver.

Storage SX SF FL FF

Disks 75* 90 60 500**

Terabytes (9 GB) 7 .8 .5 4.5Terabytes (18 GB) 1.4 1.6 1.0 9.0

* Single host channel ** Single ported disks

Page 10: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

11PP250299.ppt

PerformancePerformance

Sustained transfers to Disk RAID 5 Reads 190MB/s RAID 5 Writes 150MB/s

Burst Cache Transfer rates Reads 190MB/s Writes 190MB/s

DAC-FF

Page 11: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

12PP250299.ppt

Global Array ManagerGlobal Array Manager™™ (GAM) (GAM)

Network Security Levels Guest Access Admin Access

Online capacity expansion Remote Instrumentation

DMI SNMP

SMART Support

Wizard Configuration Flash upgradable F/W OS-Independent Server

API Performance Monitoring

Controller Statistics Drive Statistics Historical Statistics

Page 12: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

13PP250299.ppt

BenefitsBenefits Unparalleled Performance

RISC Processors--i960RN 100MHz Fibre Channel to host interface at 100MB/s per channel Fibre Channel to drive interface at 100MB/s per channel Mylex Firmware + Software

Flexible Storage & Fault Tolerance Feature rich RAID NT and Unix Clustering Storage Area Networks (SAN) Mirrored Cache RAID expansion (M.O.R.E.™1)

Configuration & Remote Management Global Array Manager™ (GAM) Client Server GUI Create, Manage, Expand and Monitor

Page 13: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

14PP250299.ppt

Target ApplicationsTarget Applications Designed for $30K to $200K servers

Departmental to Enterprise NT Servers Low-end to Mid-Range UNIX Systems 3,000 to 30,000 IO’s per second 10’s of GB’s to 10’s of TB’s

Designed for Clusters NT (Microsoft Cluster Server), NetWare ORION and

UNIX clusters Support for Storage Area Networks (SAN) Active / Active Duplex Configurations

Concurrently operation --> performance Transparent failover / failback --> non-stop operation Mirrored cache architecture --> guaranteed data integrity

Page 14: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

15PP250299.ppt

Controller 0

Reserved

Controller 1

ReservedActiveActive

Active /Active -- Fibre Active /Active -- Fibre InterconnectInterconnect Concurrent I/O Services from single or multiple servers to dual

controllers increase performance

Controller failover requires dual host ports

Fibre silicon does not support multiple port addresses

Page 15: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

16PP250299.ppt

Failover -- Fibre InterconnectFailover -- Fibre Interconnect

With multiple host ports, when a controller fails failover is initiated

Reserved port of the surviving controller assumes port ID of the active port on the failed controller

Controller 0

Reserved

Controller 1

ReservedActiveActive

Page 16: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

17PP250299.ppt

Failback -- Fibre InterconnectFailback -- Fibre Interconnect When the failed controller is replaced, port ID from the

reserved port on the surviving controller is transparently returned to the active port on the new controller

Active / Active operation is resumed

Controller 0

Reserved

Controller 1

ReservedActiveActive

Page 17: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

18PP250299.ppt

FC HBA FC HBAFC HBA

Scaleable Fault Tolerant ConfigurationsScaleable Fault Tolerant Configurations

FC Hub

Controller 0

Active Reserved

FC HBA

Controller 1

Active Reserved

Controller 3

Active Reserved

Controller 2

Active Reserved

Page 18: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

19PP250299.ppt

Wolfpack-II Parallel Application Wolfpack-II Parallel Application ComputingComputing

FC Switch

Controller 0

Active Reserved

FC HBAFC HBAFC HBA FC HBA

Controller 1

Active Reserved

Controller 3

Active Reserved

Controller 2

Active Reserved

FC HBA FC HBA FC HBAFC HBA

Page 19: DAC-FF The Ultimate Fibre-to-Fibre Channel External RAID Controller Solution for High Performance Servers, Clusters, and Storage Area Networks (SAN)

20PP250299.ppt

Parallel App Clusters - Wolfpack-IIParallel App Clusters - Wolfpack-II N-Node, Switched Fibre, N-FF’s Arrays, FCAL to Disk

FC Switch

FF Controller 1

Port 0Active

Port 1Active

FF Controller 0

Port 0Active

Port 1Active

FC HBA

FF Controller 1

Port 0Active

Port 1Active

FF Controller 0

Port 0Active

Port 1Active

FC HBAFC HBA

FC HBA