d10.1 first dissemination activity report · 2018. 12. 12. · fluidcell advanced m-chp fuel cell...

FLUIDCELL

ADVANCED M-CHP FUEL CELL SYSTEM BASED ON A NOVEL BIO-ETHANOL FLUIDISED BED

MEMBRANE REFORMER

FCH JU GRANT AGREEMENT NUMBER: 621196

Start date of project: 01/04/2014 Duration: 3 years

WP10 - Exploitation & Dissemination

D10.1 First dissemination activity report

Application area: SP1-JTI-FCH.3: Stationary Power Generation & CHP Topic: SP1-JTI-FCH.2013.3.4 Proof of concepts and validation of whole fuel cell systems for stationary

power and CHP applications at a representative scale Funding scheme: Collaborative Project Call identifier: FCH-JU-2013-1

Due date of deliverable:

30-09-2015

Actual submission date:

19-10-2015

Reference period:

01-04-2014 – 30-09-2015

Document classification code:

FluidCELL-WP10-D101-DLR-POLIMI-19102015-v11.docx

Prepared by:

POLIMI

Version DATE Changes CHECKED APPROVED

v0.1 06-10-2015 First Release POLIMI G. Manzolini

v1.1 19-10-2015 Approved (format) TECNALIA J.L. Viviente

Project co-funded by the FCH JU within the Seventh Framework Programme (2007-2013)

Dissemination Level

PU Public X

PP Restricted to other programme participants (including the Commission Services)

RE Restricted to a group specified by the consortium (including the Commission Services)

CO Confidential, only for members of the consortium (including the Commission Services)

CON Confidential, only for members of the Consortium

___________________________________________________________________________________

Acknowledgement: The research leading to these results has received funding from the European Union's Seventh Framework Programme (FP7/2007-2013) for the Fuel Cells and Hydrogen Joint Technology Initiative under grant agreement n° 621196. Disclosure: The present publication reflects only the author’s views and the FCH JU and the Union are not liable for any use that may be made of the information contained therein.


Proj. Ref.: FluidCELL-621196 Doc. Ref.: FluidCELL-WP10-D101-DLR-POLIMI-19102015-v11.docx Date: 19-10-2015 Page Nº: 2 of 16

_________________________________________________________________________________________________________________

Public

Content

1. EXECUTIVE SUMMARY ................................................................................................................. 3

1.1. Description of the deliverable content and purpose ................................................................... 3

1.2. Deviation from objectives .......................................................................................................... 3

2. Description of the activities .......................................................................................................... 4

2.1. Web-site ................................................................................................................................... 5

2.2. Public presentation and leaflet .................................................................................................. 6

2.3. Workshop and Conference dissemination activities .................................................................. 6

2.4. Publication of scientific papers .................................................................................................. 7

2.5. Newsletters ............................................................................................................................... 7

ANNEX................................................................................................................................................ 9

Annex 1. FluidCELL leaflet .............................................................................................................. 9

Annex 2. Oral presentations and poster ......................................................................................... 10



_________________________________________________________________________________________________________________

Public

1. EXECUTIVE SUMMARY 1.1. Description of the deliverable content and purpose This report summarizes the dissemination activity carried out in the first Period of the FluidCELL project. Different actions have been taken to disseminate the project targets and achievements. They included activities dedicated to general public (i.e. web-site, a public presentation summarizing the main targets and a biannual newsletter) as well as to selected audience through presentation/papers in scientific conferences/journals. Oral presentations on FluidCELL project were given at the workshop on Scale-up of Pd Membrane Technology and the ICCMR 12 conference where a leaflet was prepared as well. Abstracts to conferences specific to catalyst and fuel cell development have been submitted and will be presented in the near future. 1.2. Deviation from objectives There was no deviation from objectives



_________________________________________________________________________________________________________________

Public

2. Description of the activities The dissemination activities carried out in the first 18 months of FluidCELL project are described according to the following categories.

• Construction of a web-page;

• Preparation of Public presentation and leaflet;

• Attendance to scientific workshop conferences;

• Publication of scientific papers;

• Newsletter; Each of this activity is discussed in detail in the following dedicated sections



_________________________________________________________________________________________________________________

Public

2.1. Web-site A web-site www.fludicell.eu was prepared at the beginning of the project. The portal was adopted to quickly communicate news and events related to FluidCELL. Since the web-site can be visited by both general public and scientist, it contains general information about the objectives of the project/partnership, main achievements as well as detailed activities/results realized in the project. In the dissemination page, any public presentation/poster and scientific paper related to the project without any confidential information were made available. A screenshot of the homepage is reported below.

http://www.fludicell.eu/



_________________________________________________________________________________________________________________

Public

2.2. Public presentation and leaflet i) Public presentation: The non-confidential project presentation is considered an efficient way to communicate the key-point of the project. The purpose of the public presentation is to present the objectives and the status of the projects, the activity and achievements as well as the events related to the field. The public presentations can be downloaded from the website (http://www.fluidcell.eu/content/presentations). Two public presentations have been delivered during this period:

➢ The 1st public presentation, describing the project, objectives, consortium and main activities. ➢ The 2nd public presentation at month 18 with the latest information on the status of the project,

activities and achievements. The first objective of the public presentations which can be downloaded by any web-page visitor is to inform about the project content. Furthermore, not including any confidential content, it could be used by any beneficiary in the consortium to present the FluidCELL project, goals and achievements. ii) Leaflet: As part of the dissemination activity a leaflet of the project has been drafted and printed. This leaflet includes the main information of the project. The leaflet was drafted in correspondence to the 12th International Conference on Catalysis in Membrane Reactors (ICCMR12) which will be held from June 22 – 25, 2015 in Szczecin (Poland), where the FluidCELL project was advertised. Now it is also used for disseminating FluidCELL in the frame of other events attended by the consortium members as well as in the same institution The leaflet is attached in the Annex 1. 2.3. Workshop and Conference dissemination activities Attendance to workshop and conferences was one of the main way adopted to communicate the communicate project achievements within the scientific community. Compared to scientific publications, workshop and conferences are really useful because there is a real-time response from the scientific community. Therefore, in the first period of FluidCELL project, quite a few actions were taken in this direction. Since in the first part of the project, most of the research activities were dedicated to development of the fuel processor development rather than the overall process, conferences on membrane and membrane reactor were the selected target aligned with the advancements of the project. Main events and dissemination activities were: 1. The 12th International Conference on Catalysis in Membrane Reactors (ICCMR12) June 22 – 25,

2015 in Szczecin (Poland). ➢ Oral presentation: “Preparation and characterization of ultra-thin (< 1 μm) palladium-silver

membranes”, D.A. Pacheco Tanaka1, J. Melendez, E. Fernandez, Pedro L. Arias, A. Helmi and F. Gallucci,

http://www.fluidcell.eu/content/presentations



_________________________________________________________________________________________________________________

Public

➢ Poster: “Preparation and characterization of ultra-thin (< 1 μm) Pd-Ag membranes on porous alumina support (100 nm pore size)”, J. Melendez, E. Fernandez, A. Helmi, F. Gallucci, Pedro L. Arias and D.A. Pacheco Tanaka.

2. The Czech-Italian-Spanish Conference on Molecular Sieves and Catalysis (GIC 2015) ➢ Poster: “Ethanol Steam Reforming on Pt-Ni/CeO2 catalysts supported on mesoporous silica” (by

Vincenzo Palma, Concetta Ruocco, Eugenio Meloni, Antonio Ricca and Paolo Ciambelli) The oral presentation and poster are included in Annex 2. 2.4. Publication of scientific papers Even if the project is only halfway, meaning that some activities haven’t started yet, quite a few efforts were dedicated to the submission of papers for scientific journals. Publication to scientific journal is run in parallel to the attendance of workshop/conferences, because of the different and wider audience. The two publications were about membrane development and system design which are activities almost completed in the first part of the project. 1. “Development of highly permeable ultra-thin Pd-based supported membranes” E. Fernandez, J. A.

Sanchez-García, J. Melendez, V. Spallina, M. van Sint Annaland, F. Gallucci and D.A. Pacheco Tanaka submitted to Chemical Engineering Journal.

2. “Optimization of a micro-CHP system based on fluidized bed membrane reactor fed with bio-ethanol

and PEM fuel cells” S. Foresti and G. Manzolini submitted to International Journal of Hydrogen Energy

2.5. Newsletters Last dissemination activity performed was the preparation of a biannual newsletter. A newsletter can be read by any person and give the idea of the main targets/achievements of the project. However, results and achievements dealing with IP issues cannot be disclosed. Three newsletters have been delivered during this period. The newsletter was used to keep up to date the public, scientific community and industry as well as associations and/or platforms with the advancements of the project with respect to the planned activity and targets. The newsletters are available in the public website (http://www.fluidcell.eu/content/communication) and they were also sent via email to the companies/organization involved in the fuel cell and hydrogen sector. A short example of the organization in the mailing list of the newsletter is detailed in the table hereafter.

http://www.fluidcell.eu/content/communication



_________________________________________________________________________________________________________________

Public

Italy FAST

Favour the Italian participation in European

Research and Technology Programmes and their

dissemination;

Norway RCN Research Council Norway

France IRCELYON University

NetherlandsNederlandse Waterstof en

Brandstofcellen VerenigingTechnology association

NetherlandsOSPT. Netherlands Research

School in Process Technology

Interuniversity school in the area of Chemical

Engineering and Process Technology

NetherlandsJMBC. J.M. Burgerscentrum

for Fluid MechanicsDutch researchschool for fluid mechanics

Italy CEI CT 105 Electrotechnical Italian Commettee

Italy POLIMI

Spain Cluster de Energia Energy partners association

Spain PTE HPC Technology platform for H2 and FC

Spain AEH2 H2 technology partners association

SpainAPPICE (Asociación Española

de Pilas de Combustible)FC technology partners association

Spain BioPlat Biomass technology platform

Spain SusChem - ES Sustainable Chemistry technology platform

France AFHYPAC (Association Française pour l'Hydrogène et les Piles à Combustible)H2 & FC technology partners association

France ALPHEA hydrogene H2 technology partners association

International N.ERGHY Tecnology platform

International NEW.IG Industry grouping

International IEAGHG R&D Programme of IEA on GHG

International IEAHIA IEA's Hydrogen Program

International IEA Fuel Cells Implementing agreement on fuel cells

International EHA European Hydrogen Association

International EMS European Membrane Society

International ACS American Chemical Society

International EMH European Membrane House

International EIMRA (European Inorganic Membrane Research Alliance)Research centre's alliance

International HySafe Association for Hydrogen Safety

International European Biofuels Technology PlatformBiofuels technology platform

InternationalISO TC 197 WG14 H2 Quality

for stationary applicationsTechnical commettee for statard development



_________________________________________________________________________________________________________________

Public

ANNEX Annex 1. FluidCELL leaflet



_________________________________________________________________________________________________________________

Public

Annex 2. Oral presentations and poster ➢ Poster: “Ethanol Steam Reforming on Pt-Ni/CeO2 catalysts supported on mesoporous silica” (by

Vincenzo Palma, Concetta Ruocco, Eugenio Meloni, Antonio Ricca and Paolo Ciambelli)

➢ Oral presentation: “Preparation and characterization of ultra-thin (< 1 μm) palladium-silver

membranes”, D.A. Pacheco Tanaka1, J. Melendez, E. Fernandez, Pedro L. Arias, A. Helmi and F. Gallucci,

➢ Poster: “Preparation and characterization of ultra-thin (< 1 μm) Pd-Ag membranes on porous

alumina support (100 nm pore size)”, J. Melendez, E. Fernandez, A. Helmi, F. Gallucci, Pedro L. Arias and D.A. Pacheco Tanaka.



_________________________________________________________________________________________________________________

Public

d10.1 first dissemination activity report · 2018. 12. 12. · fluidcell advanced m-chp fuel cell...

Documents