Dyna-Flo Control Valve Services LTD. Page 2

D-Force Scotch Yoke Pneumatic Actuator

Available Sizes (DDA & DSR): FEATURES:

65, 80, 100, 125, 140, 160 and 210 (Dual Piston)

DDA 26082 to 80212 (Piston Rotary)

33082SR80 to 80211SR80 (Piston Rotary)

Small D-Force

• Namur mounting

• Corrosion resistant construction

• Externally adjustable travel stops

• High torque compact design superior to a rack and pinion

• Low temperature construction standard: -40OF to 230OF (-40OC to 110OC)

Large D-Force

• Standard construction temperature : -20OF to 200OF (-29OC to 177OC)

• Rugged corrosion resistant design

Operating Range:

40 Psi (2.75 Bar) - 143 Psi (9.8 Bar) max.

The Dyna-Flo D-Force actuator is a rugged scotch yoke actuator designed for use with quarter turn valves. D-Force actuators are available in double acting (DDA) and spring return (DSR) confi gurations. The compact dual piston design of the Model 65 through 210 allows for simplifi ed mounting and cost effective automation of any rotary application. The large D-Force is well suited for larger torque requirements up to 427,845 lbs-in (48,340 N-M).

nstruction

All Dyna-Flo manufactured products are constructed to high quality specifi cations to

ensure superior perfomance and customer satisfaction.

A Key element of the quality process involves building a company around people who share our

desire to exceed customer quality standards. At Dyna-Flo, we place people within our company

who can meet our meticulous standards of quality. We insist on a constant two-way information

fl ow between fi eld personnel and management because we believe that front line input is

critical to our ongoing quality process improvement. The end result is improved customer

satisfaction because at Dyna-Flo we not only meet customer expectations,

we exceed them.

onstructed to high quality specifi cations to

Radius Hydraulic Actuators

Radius KH/KHM-1000 Scotch Yoke Hydraulic Actuators are available in double acting and spring return styles. KH/KHM-1000 actuators are manufactured with high quality materials and designed for use with quarter-turn valves. These durable precision actuators are available with a number of options making them ideal for any application requiring a hydraulic actuator.

Westlock Switches

Westlock 9479-BY Switches may be mounted to any scotch yoke, rotary, vane or rack and pinion type actuator and constructed from quality materials. The explosion-proof / fl ame-proof 9479-BY is designed to offer reliably accurate hazardous location position signaling. Dyna-Flo is a tier 1 Westlock distributor.

Mounting Kits

Dyna-Flo mounting kits are designed and manufactured completely in-house by knowledgeable personnel with years of experience. All materials used are of the highest quality and are chosen for toughness and strength, such as 4140 alloy steel. Proper fi t is priority 1, and whether it’s a valve, actuator and/or accessories, if you need it we can make a mounting kit for it.

Argus Pilots

Incorporated into the Argus Pressure Pilot is the same sensing capsule design of the Argus Pressure Switch providing customers with a superior fi eld-tested product. The rugged, yet versatile design allows for the simplifi ed control of circuits. Argus Pressure Pilots are primarily designed for use with the Argus Self-Contained Hydraulic ESD System and will accept a hydraulic or pneumatic signal.

Argus Pressure Isolation Valve

Argus Pressure Isolation Valves allow for safe equipment calibration or maintenance without shutting off the line. Designed to allow for easy and economical isolation from process fl uids or gases, the Argus PIV’s are a smart choice for any ESD system.

Argus ESD Assembly

Argus Pumps

The Argus Self-Contained Hydraulic Pump Module (HPM) is a dependable zero emission shutdown pump. As part of an Emergency Shutdown System the Argus HPM is environmentally friendly and does not require an external power source. These pumps are big on safety, performance, and quality while being adaptable for use with quarter turn or linear actuators.

Dyna-Flo Control Valve Services LTD. All rights reserved. Page 12 P-ESDB0614A

ASCO Solenoids

ASCO Red-Hat Direct Acting General Service Solenoid Valves are nifty little units that are manufactured with either a brass or steel body. These Solenoid valves are available in 1/8” to ¼” NPT connections in the valve body for in-line piping. ASCO Solenoids are mountable and allow for a very broad range of applications. These valves are extremely durable and reliable and will provide years of exceptional service.

AMOT 4057

AMOT Model 4057 Valves are designed for utilization in both manual and automatic / pneumatic or hydraulic control applications. The 4057’s are acceptable for use with natural gas, petroleum-based lubricants, hydraulic oils and many other fl uids. Each 4057 is manufactured using precision parts and tested to ensure only the highest quality product reaches customers.

Bel-Gas P50

BelGAS P50 and P50 NACE Filter Regulators provide superior performance and reliability when compared to similar units on the market. P50’s are designed for instrumentation and general-purpose use in standard (P50) and corrosive (P50 NACE) environments. All BelGAS regulators are constructed from quality materials and tested to guarantee that customers always receive an exceptional product.

Deltrol Speed Control

Deltrol Easy Read Flow and Needle Valves are ideal for general industrial applications such as machine tools and packaging equipment. These tough valves provide controlled fl ow in one direction, free fl ow in the other direction and are adjustable under pressure. Manufactured in brass, carbon steel, and stainless steel with metal setting knobs and stems, these durable valves are sure to offer accurate and reliable control.

Parker Quick Exhausts

Parker Quick Exhausts allow for the rapid exhaust of supply air when installed between a valve and actuator. These Quick Exhausts can also be used as shuttle valves isolating the normal system from an emergency system.

Dyna-F lo Contro l Va lve Serv ices Ltd .Edmonton Sales Offi ce Calgary Sales Offi ce

1911 - 66 Avenue

Edmonton, Alberta, Canada

T6P 1M5

Phone: (780) 469-4000 #300, 404 - 6th Avenue SW,

Calgary, Alberta, Canada

T2P 0R9

Phone: (403) 861-5935

Sales Fax: (780) 469-4035 Fax: (403) 269-2287

Texas Sales Offi ce Toll Free: 1-866-396-2356

or visit

www.dynafl o.com

2003C Preston Avenue

Pasadena, Texas, U.S.A.

77503

Phone: (713) 477-7466

General Fax: (713) 477-7467