eNgiNe

Model Yanmar 4TNV88-BXPYBD

Cylinders 4

Bore/Stroke 3.46 in x 3.54 in (88 x 90 mm)

Displacement 134.2 in3 (2.2 L)

Fuel injection Direct

Fuel injection pump Mechanical

Fuel Diesel

Fuel filter Full flow, paper element

Cooling Liquid

Horsepower per SAE J1349

Net 39.3 hp (29.3 kW) @ 2400 rpm

Maximum torque @ 1440 rpm

Net 102.7 lb·ft (139.3 N·m)

BOOm/ARm

Boom

Swing 70° left/60° right

Length 9 ft 9 in (2.98 m)

Arm

Length 5 ft 6.5 in (1.66 m)

uNDeRCARRiAge

Number of rollers

Top, each track 1

Bottom, each track 5

Gradeability 58% (30°)

Drawbar Pull 12,409 lbf (55.2 kN)

hyDRAuliCS

Pumps Tandem variable displacement axial piston pump

Capacity –

Maximum 2 x 15 gpm

(2 x 57.1 L/min)

Auxiliary Flow 15.0 gpm (57.1 L/min)

System relief pressure –

Standard 3,336 psi (23.0 MPa)

Pilot control hydraulic system –

Pump (1) Gear pump

Maximum capacity 4.0 gpm (15.2 L/min)

Relief pressure 514 psi (3.5 MPa)

Control valves —

11 spool

Pilot control for left/right track travel, boom, arm, bucket & swing

Manual control for breaker & backfill blade

Swing/Dozer blade

Motor (1) Fixed displacement axial piston design

Speed 0-8.9 rpm

Brake Hydraulic brake

Tail swing radius 4 ft 2 in (1280 mm)

Tail swing overhang 0 ft 11.7 in (299 mm)

Travel –

Motor (2) 2-speed axial piston design

Final drive Planetary gear

reduction

Travel speeds – Forward/Reverse

Low 1.7 mph (2.7 km/h)

High 2.9 mph (4.6 km/h)

hyDRAuliC CyliNDeRS

Boom cylinder (1)

Bore diameter 3.94 in (100 mm)

Rod diameter 2.17 in (55 mm)

Stroke 26.8 in (680 mm)

Arm cylinder (1) –

Bore diameter 3.54 in (90 mm)

Rod diameter 1.97 in (50 mm)

Stroke 28.9 in (735 mm)

Bucket cylinder (1) –

Bore diameter 2.95 in (75 mm)

Rod diameter 1.57 in (40 mm)

Stroke 21.4 in (543mm)

eleCTRiCAl

Voltage 12 volts, negative ground

Alternator 40 amp

Batteries (1) 12V Low-maintenance

SeRviCe CApACiTieS

Hydraulic tank

Refill capacity 9 gal (34 L)

Total system 16 gal (61 L)

Engine oil

w/filter change 2 gal (7.4 L)

Fuel 19.8 gal (75 L)

Radiator 1.6 gal (6.0 L)

OpeRATiNg weighT

Cab with 165 lb (75 kg) operator, 247 lb (112 kg) bucket, full fuel and standard equipment 12,295 lb (5577 kg)

Page 1 of 4

CX55BMTS

COMPACT EXCAVATOR TIER 4 COMPLIANT

Load (Lift 5 ft 7.5 ft 10 ft 12.5 ft 15 ft 17.5 ftPoint) (1.5 m) (2.3 m) (3.0 m) (3.8 m) (4.6 m) (5.3 m)Height END SIDE END SIDE END SIDE END SIDE END SIDE END SIDE+15 ft 1,800 lb* 1,800 lb*(4.6 m) 810 kg* 810 kg*

+12.5 ft 1,640 lb* 1,640 lb* 1,860 lb* 1,740 lb(3.8 m) 740 kg* 740 kg* 840 kg* 780 kg

+10 ft 1,830 lb* 1,830 lb* 1,850 lb* 1,750 lb(3.0 m) 830 kg* 830 kg* 830 kg* 790 kg

+7.5 ft 3,840 lb* 3,840 lb* 2,670 lb* 2,670 lb* 2,230 lb* 2,230 lb* 2,030 lb* 1,710 lb(2.3 m) 1740 kg* 1740 kg* 1210 kg* 1210 kg* 1010 kg* 1010 kg* 920 kg* 770 kg

+5 ft 3,730 lb* 3,140 lb 2,740 lb* 2,230 lb 2,280 lb* 1,660 lb 2,060 lb* 1,280 lb(1.52 m) 1690 kg* 1420 kg 1240 kg* 1010 kg 1030 kg* 750 kg 930 kg* 580 kg

+2.5 ft 4,550 lb* 2,980 lb 3,190 lb* 2,140 lb 2,530 lb* 1,620 lb 2,160 lb* 1,260 lb(0.8 m) 2060 kg* 1350 kg 1440 kg* 970 kg 1140 kg* 730 kg 970 kg* 570 kg

Ground 3,710 lb* 3,710 lb* 4,910 lb* 2,900 lb 3,480 lb* 2,080 lb 2,700 lb* 1,580 lbLevel 1680 kg* 1680 kg* 2220 kg* 1310 kg 1570 kg* 940 kg 1220 kg* 710 kg

-2.5 ft 4,130 lb* 4,130 lb* 5,940 lb* 4,630 lb 4,910 lb* 2,890 lb 3,550 lb* 2,060 lb 2,710 lb* 1,570 lb(-0.8 m) 1870 kg* 1870 kg* 2690 kg* 2100 kg 2220 kg* 1310 kg 1610 kg* 930 kg 1220 kg* 710 kg

-5 ft 6,320 lb* 6,320 lb* 6,730 lb* 4,700 lb 4,570 lb* 2,920 lb 3,330 lb* 2,070 lb (-1.5 m) 2860 kg* 2860 kg* 3050 kg* 2130 kg 2070 kg* 1320 kg 1510 kg* 930 kg

-7.5 ft 9,150 lb* 9,150 lb* 5,450 lb* 4,810 lb 3,750 lb* 2,990 lb (-2.3 m) 4150 kg* 4150 kg* 2470 kg* 2180 kg 1700 kg* 1350 kg

-10 ft 2,670 lb* 2,670 lb*(-3.0 m) 1210 kg* 1210 kg*

*Rated loads are hydraulic limits rather than tipping load limits.

Cab model — 5 ft 6.5 in (1.66 m) Arm Lift capacities calculated using 15.7 in (400 mm) shoes, 247 lb (112 kg) bucket, blade down.

lifT CApACiTieS

Canopy model — 5 ft 6.5 in (1.66 m) Arm Lift capacities calculated using 15.7 in (400 mm) shoes, 247 lb (112 kg) bucket, blade down.

Load (Lift 5 ft 7.5 ft 10 ft 12.5 ft 15 ft 17.5 ftPoint) (1.5 m) (2.3 m) (3.0 m) (3.8 m) (4.6 m) (5.3 m)Height END SIDE END SIDE END SIDE END SIDE END SIDE END SIDE+15 ft 1,800 lb* 1,800 lb*(4.6 m) 810 kg* 810 kg*

+12.5 ft 1,640 lb* 1,640 lb* 1,860 lb* 1,810 lb(3.8 m) 740 kg* 740 kg* 840 kg* 820 kg

+10 ft 1,830 lb* 1,830 lb* 1,850 lb* 1,810 lb(3.0 m) 830 kg* 830 kg* 830 kg* 820 kg

+7.5 ft 3,840 lb* 3,840 lb* 2,670 lb* 2,670 lb* 2,230 lb* 2,230 lb* 2,030 lb* 1,780 lb(2.3 m) 1740 kg* 1740 kg* 1210 kg* 1210 kg* 1010 kg* 1010 kg* 920 kg* 800 kg

+5 ft 3,730 lb* 3,250 lb 2,740 lb* 2,310 lb 2,280 lb* 1,730 lb 2,060 lb* 1,340 lb(1.52 m) 1690 kg* 1470 kg 1240 kg* 1040 kg 1030 kg* 780 kg 930 kg* 600 kg

+2.5 ft 4,550 lb* 3,100 lb 3,190 lb* 2,230 lb 2,530 lb* 1,690 lb 2,160 lb* 1,320 lb(0.8 m) 2060 kg* 1400 kg 1440 kg* 1010 kg 1140 kg* 760 kg 970 kg* 590 kg

Ground 3,710 lb* 3,710 lb* 4,910 lb* 3,020 lb 3,480 lb* 2,170 lb 2,700 lb* 1,650 lbLevel 1680 kg* 1680 kg* 2220 kg* 1360 kg 1570 kg* 980 kg 1220 kg* 740 kg

-2.5 ft 4,130 lb* 4,130 lb* 5,940 lb* 4,810 lb 4,910 lb* 3,010 lb 3,550 lb* 2,150 lb 2,710 lb* 1,640 lb(-0.8 m) 1870 kg* 1870 kg* 2690 kg* 2180 kg 2220 kg* 1360 kg 1610 kg* 970 kg 1220 kg* 740 kg

-5 ft 6,320 lb* 6,320 lb* 6,730 lb* 4,880 lb 4,570 lb* 3,030 lb 3,330 lb* 2,160 lb (-1.5 m) 2860 kg* 2860 kg* 3050 kg* 2210 kg 2070 kg* 1370 kg 1510 kg* 970 kg

-7.5 ft 9,150 lb* 9,150 lb* 5,450 lb* 4,990 lb 3,750 lb* 3,110 lb (-2.3 m) 4150 kg* 4150 kg* 2470 kg* 2260 kg 1700 kg* 1410 kg

-10 ft 2,670 lb* 2,670 lb*(-3.0 m) 1210 kg* 1210 kg*

*Rated loads are hydraulic limits rather than tipping load limits.

CX55MTSB • Page 2 of 4

DimeNSiONSA. Overall height 8 ft 4 in (2.55 m)

B. Overall length 17 ft 10 in (5.42 m)

C. Width of upperstructure 6 ft 4 in (1.94 m)

D. Track overall length 8 ft 1 in (2.48 m)

E. Track overall width w/15.7 in (400 mm) shoes 6 ft 5 in (1.96 m)

F. Track shoe width 15.7 in (400 mm)

G. Center to center (idler to sprocket) 6 ft 6 in (1.90 m)

H. Upperstructure ground clearance 24.5 in (625 mm)

J. Minimum ground clearance 1 ft 2 in (350 mm)

K. Tail swing radius 4 ft 2 in (1.28 m)

L. Backfill blade height 1 ft 2 in (345 mm)

Working weight 12,295 lb (5577 kg)

Ground pressure 4.5 psi (31.3 kPa)

Boom swing Left 70°/ Right 60°

Tail swing overhang 11.7 in (299 mm)

C

D E

G

H

K

J

F

peRfORmANCe SpeCS 5 ft 6.5 in (1.66 m) Arm

M. Maximum dig radius 20 ft 5 in (6.22 m)

N. Dig radius at groundline 19 ft 11 in (6.07 m)

P. Maximum dig depth 12 ft 10 in (3.91 m)

Q. Dump height 13 ft 10 in (4.20 m)

R. Overall reach height 18 ft 11 in (5.76 m)

S. Bucket rotation 178°

T. Vertical straight wall dig depth 10 ft 0.5 in (3.06 m)

Arm digging force 5,598 lbf (24.9 kN)

Bucket digging force, 2 position bucket 11,240 lbf (50.0 kN)

L

MN

P

Q

R

S

T

CX55MTSB • Page 3 of 4

B

A

STANDARD equipmeNT

OPERATOR’S COMPARTMENT

ROPS/FOPS four post canopy

Operator’s controls:

Pilot operated hand controls and foot pedals

Display includes:

Engine oil pressure, water temperature lamp, air filter lamp, water separator detection lamp, low fuel warning lamp, battery charge lamp, glow plug indicator lamp, water temperature gauge, fuel gauge and hourmeter

Adjustable seat with seat belt

Two-piece floor mat

Fold-open/-up front window (cab)

Arm rests

ENGINE

Yanmar 4TNV88-BXPYBD diesel

4-cycle

Water cooled

Direct injection

One-touch decelerator

Engine access under rear hood

Dry-type air cleaner

Glow plug starting aid

ELECTRICAL

12-volt electrical starting system

Heavy-duty battery

Horn

HYDRAULICS

Auxiliary hydraulics (single/bi-directional) and plumbing to arm

Large hydraulic oil cooler

Control pattern selector valve

TRACK DRIVE

Rubber tracks

Automatic 2-speed travel

Fully hydrostatic drive system

Sealed and lubricated track rollers

Track tension adjustment (grease-type)

Disc-type parking brake (auto-release and -apply)

UPPER STRUCTURE

Minimal tail swing

Swing lock

Swing brake

Swing shock valve

OTHER

Swing boom (70° left/60° right)

Hydraulic backfill blade

Eco-friendly diesel fuel drain

Reinforced boom work light

Boom cylinder guard

Thumb bracket

OpTiONAl equipmeNT

OPERATOR’S COMPARTMENT

Cab with heat and AC

OTHER

Steel tracks

Mechanical coupler

Rigid thumb

Hydraulic thumb

2nd auxiliary hydraulics

4-way hydraulic dozer blade

BuCKeTS

Width SAE Heaped Capacity Weight

12 in (305 mm) 3.0 ft3 (0.085 m3) 314 lb (142 kg)

18 in (457 mm) 4.5 ft3 (0.127 m3) 362 lb (164 kg)

24 in (610 mm) 6.3 ft3 (0.178 m3) 435 lb (197 kg)

36 in (914 mm) 9.8 ft3 (0.277 m3) 525 lb (238 kg)

Form No. CCE201103CX55B Printed in U.S.A. © 2011 CNH America LLCReplaces form no. None CX55MTSB • Page 4 of 4 All Rights Reserved

NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices, where applicable.NOTE: All engines meet current EPA emissions requirements.IMPORTANT: Case Construction Equipment Inc. reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Case Construction Equipment Inc. does not warrant the safety or reliability of attachments from other manufacturers.Case is a registered trademark of CNH America LLC. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC, are the property of those respective companies.

www.casece.com

All Case construction equipment is biodiesel ready.

CX B SERIESCOMPACT EXCAVATORS

CX17B | CX27B | CX31B | CX36B | CX55B

2

MINI EXCAVATORS. MANY ADVANTAGES.Whether you’re a small business or a general contractor needing impressive power within a small space, the full line of CASE compact excavators offer all the features and functionality needed to handle the toughest jobs in the tightest places. Four Tier 4 Interim models and the Tier 4 Final CX55B deliver breakout forces from 3,417 to 11,028 lbs. and digging depths up to nearly 13 feet. And it’s all powered by high-efficiency hydraulics that maximize performance, and precision controls that instantly feel familiar. Experience the big-time benefits of the CX B Series.

Zero Tail Swing**Excludes CX55B

Center-Swing Boom Control

Integrated-Flow Pump System

Exclusive In-Frame Sliding Door**Excludes CX55B

3

Three-Post ROPS Design

Automatic* Two-Speed Travel*Manual two-speed travel on CX17B and CX27B

Models Available

CX27B

CX31B

CX55B

CX17B

CX36B

4

IT HOLDS NOTHING BACK.

RETRACTABLE TRACKS

Getting through backyard gates or any tight spot is easy for the CX17B, thanks to tracks that hydraulically retract from 52 inches to a narrow 39-inch width. And all our compact excavators come standard with durable rubber tracks with big, deep nubs for greater grip. CASE even offers steel tracks on every model for heavy-duty applications.

IN THE CLEAR WITH ZERO TAIL SWING*

CASE compact excavators offer a true, zero-radius tail swing that keeps the sides and back of the machine within the width of the tracks when rotating – even with the door open. You can dig and dump 180°, right against obstacles, without a problem and with less risk of damaging the machine or worksite.

*Excludes CX55B

INTEGRATED-FLOW PUMP SYSTEM: SMART POWER PLACEMENT

This innovative system helps improve fuel efficiency and maximize strength by directing hydraulic power to where you need it, when you need it. With dozing, flow is focused on the tracks and blade. When swinging or raising the arm, pump power is diverted to the boom. During digging, all flow is pumped to the bucket and arm.

FASTER CYCLE TIMES WITH TWO-SPEED TRAVEL

Automatic on the CX31B, CX36B and CX55B, and push-button activated on the CX17B and CX27B, the two-speed travel drive function matches speed and performance to jobsite conditions. All models also include one-touch engine deceleration to quickly cut engine RPMs for greater fuel savings and reduced noise levels.

FOOT PEDAL CENTER-SWING BOOM CONTROL

A foot-controlled boom swing allows for simultaneous operation of the house and boom. Coupled with a center-swing design that angles the boom up to 80° left and 65° right, operators are able to dig and use attachments around trees and parallel with foundations, fences, walls or whatever’s on the worksite.

“My two CASE compact excavators just shine. We have had zero problems.” — Benoit Drainage

5

6

3-POST CANOPY*. 360° VISIBILITY.

Our ROPS-certified three-post canopy design creates a wide-open entry area for easier access in and out of the operating platform. And as an added benefit, the absence of a fourth post provides greater visibility of the attachment and around the machine.

*CX55B features a four-post ROPS/ FOPS-certified canopy.

7

GET A LITTLE MORE COMFORTABLE.

PRECISION CONTROLS COME STANDARD

All CASE compact excavators – even our smallest models – come standard with hydraulic pilot controls for comfortable, highly responsive operation. On top of that, all models also feature a pattern control selector valve that lets you easily toggle between ISO and SAE patterns to meet operator preference.

CONSTRUCTED FOR COMFORT

With an adjustable seat and standard arm rest, as well as an optional heating and A/C system* for our enclosed cabs, the spacious operating platforms of the CX B Series help keep you comfortable all day long and all year ‘round.

*HVAC system only available on the CX31B and larger.

SMARTEST CAB DOOR IN ITS CLASS

What’s the point of a zero tail swing design if the open door hangs over the tracks? CASE compact excavators* come standard with a cab door that slides all the way open within the machine frame, keeping it securely out of the way.

*Excludes CX55B

Exclusive sliding cab door maintains zero tail swing.

Proportional auxiliary hydraulics joystick with thumb toggle puts precision at your fingertips.

Spacious CX55B cab offers an optional LCD display.

COMPACT CLASS, MID-SIZE MUSCLE.CX55B

The CX55B pushes the envelope of what it means to be a mini-excavator. It features best-in-class power, a wider operating range and a cab design that offers plenty of room and superior visibility – all while maintaining minimum tail swing and an overall cab height of only 8-feet 4-inches. It’s perfect for when you need a lot of strength in a little package.

8

7.5-INCH MINIMAL TAIL SWING

Minimal tail overhang allows for excellent maneuverability in tight areas.

ECO MODE

Achieve 25% less fuel consumption at the push of a button (compared to previous generation).

iNDr COOLING SYSTEM

A revolutionary Integrated Noise and Dust Reduction (iNDr) filter removes dust before cooling components to maximize cooling efficiency and reduce cleaning intervals. It also delivers amazingly quiet operation.

DOZER-STYLE BLADE

A new, “one-pass” backfill blade design forms material into an arc that always falls forward.

LCD MONITOR

An optional LCD monitor makes performance data and machine diagnostics readily available.

9

10

MAINTENANCE MADE EASY.

SERVICEABILITY IS IN OUR DNA

When you invest in CASE equipment, you need it to last. We make it simple. CASE compact excavators are no exception. From wide-open, swing-out access panels to ground-level site gauges and service points, you can do daily maintenance in a matter of minutes. It’s the easiest way to help you get the most performance and longest life out of your machine.

EASY ACCESS TO EVERYTHING

1. Air filter

2. Water separator

3. Fuel filter

4. Hydraulic oil fill

5. Radiator

6. Grouped hydraulic hoses

7. Hydraulic site gauge

8. Hour meter

9. ISO/SAE pattern changer

10. Single/bi-directional select

11. Lockable fuel cap

12. Engine oil fill

13. Engine oil filter

14. Fuel drain

15. Coolant reservoir

Update Livery

11

NO TOOLS NEEDED

The CX B Series continues the CASE hallmark of simple serviceability with features like tool-free access to routine maintenance points.

EASY ACCESS TO EVERYTHING

11. Lockable fuel cap

12. Engine oil fill

13. Engine oil filter

14. Fuel drain

15. Coolant reservoir

SUPPORT COMES STANDARD

Base & Extended Warranty Coverage*

1-Year/1,000-Hour Full-Coverage Limited Base Warranty. * Please see your CASE dealer for limitations, exclusions and confirmation of policies in effect.

Purchased Protection Plan

Extension of the factory base and extended coverage is available at an additional cost. Plans are available up to three years/3,000 hours on CASE compact excavators. Talk to your CASE dealer to determine the plan that best fits your needs.

Breakdown Assistance

Standard on all CASE equipment.

STRONGER PRODUCT SUPPORT SOLUTIONS

Your CASE dealer knows best how you can maximize your equipment investment and uptime, with genuine CASE parts, expert service and a complete range of product support solutions – including CASE remanufactured and all-makes parts. CASE supports better parts availability and faster deliveries, through nine parts distribution centers in North America and a forecasting system to ensure that the right parts will be there when you need them. And only CASE dealers have exclusive access to the Electronic Service Tool that quickly pinpoints machine issues to help maximize uptime.

12

AUXILIARY EXCELLENCE

Auxiliary hydraulics come standard with lines plumbed all the way down the arm for easy hook-up.

ATTACHMENTS GALORE.

INDUSTRY-EXCLUSIVE BLADE DESIGN

CASE dozer blades feature an increased 38° approach angle and a unique shape that efficiently rolls dirt as it pushes, leaving a smooth and level surface. And with the optional 4-way blade*, operators can raise and lower the blade for added stability and improved backfilling or grading.

*4-way angle blade available on the CX31B and larger

SMARTFIT™ BUCKET TEETH

CASE compact excavator buckets come standard with the innovative SmartFit bucket tooth system. These heavy-duty, self-sharpening teeth combine exceptional strength and unmatched ease of installation, thanks to a hammerless fastener system with reusable locking pins. Available in a full range of styles.

13

BUCKETS AND MUCH MORE

There’s a full range of attachments, including a full line of CASE buckets with a wide range of sizes and digging forces.

NOTE: *CEGR = Cooled Exhaust Gas Recirculation; DPF = Diesel Particulate Filter.**Measurements taken using standard equipment.

DIMENSIONS

Overall height

Overall length

Width of upperstructure

Track overall length

Track overall width with shoes**

Track shoe width

Upperstructure ground clearance

Minimum ground clearance

Rear tail swing radius

Digging depth

8 ft. 4 in.(2.55 m)

17 ft. 10 in.(5.42 m)

6 ft. 4 in.(1.94 m)

8 ft. 1 in.(2.48 m)

6 ft. 6 in.(1.98 m)

15.7 in.(400 mm)

24.5 in. (625 mm)

14.0 in. (350 mm)

4 ft. 2 in. (1.28 m)

12 ft. 10 in. (3 912 mm)

8 ft. 5 in.(2.57 m)

15 ft. 5 in.(4.71 m)

5 ft. 1 in.(1.55 m)

7 ft. 1 in.(2.15 m)

5 ft. 7 in.(1.70 m)

11.8 in.(300 mm)

22.0 in. (570 mm)

12.9 in. (330 mm)

2 ft. 9 in. (0.85 m)

10 ft. 1 in. (3 073 m)

8 ft. 5 in.(2.57 m)

14 ft. 4 in.(4.39 m)

5 ft. 1 in.(1.55 m)

6 ft. 7 in.(2.00 m)

5 ft. 1 in.(1.55 m)

11.8 in.(300 mm)

22.0 in. (570 mm)

12.9 in. (330 mm)

2 ft. 7 in. (0.79 m)

9 ft. 2 in. (2 794 mm)

8 ft. 2 in.(2.50 m)

13 ft. 11 in.(4.13 m)

4 ft. 7 in.(1.40 m)

6 ft. 6 in.(1.98 m)

4 ft. 11 in.(1.50 m)

9.8 in.(250 mm)

20.0 in. (520 mm)

9.8 in. (250 mm)

2 ft. 5 in. (0.75 m)

8 ft. 4 in. (2 540 mm)

7 ft. 9 in.(2.35 m)

11 ft. 3 in.(3.42 m)

2 ft. 11 in.(0.89 m)

5 ft. 2 in.(1.56 m)

4 ft. 4 in.(1.32 m)

9.1 in.(230 mm)

18.0 in. (445 mm)

6.9 in. (175 mm)

2 ft. 2 in. (0.66 m)

7 ft. 1 in. (2 159 mm)

SPECIFICATIONS

Engine

Net hp (kW)

Emissions certification*

Bucket digging force – lb. (kN)

Arm digging force – lb. (kN)

Operating weight – lb. (kg)

CX55B Tier 4 Final

Yanmar 4TNV88-C-PYB

39.3 (29.3)@ 2400 RPM

Tier 4 Final(CEGR/DPF)

11,128(49.5)

5,300(23.7)

11,310(5 130)

CX36B

Yanmar 3TNV88-BPYB

28.4 (21.2)@ 2400 RPM

Tier 4 Interim

8,430(37.5)

3,731(17.0)

7,958(3 610)

CX31B

Yanmar 3TNV88-BPYB

28.4 (21.2)@ 2400 RPM

Tier 4 Interim

8,430(37.5)

3,373(15.0)

6,679(3 030)

CX27B

Yanmar 3TNV82-A-SYB

21.3 (15.9)@ 2200 RPM

Tier 4 Interim

6,351(28.2)

2,877(12.8)

5,556(2 520)

CX17B

Mitsubishi L3E-W231KBS

15.2 (11.3)@ 2200 RPM

Tier 4 Interim

3,417(15.2)

1,956(8.7)

3,638(1 650)

14

THE CX B SERIES COMPACT EXCAVATORS

15

BUILDING A STRONG CASE

Already in high gear with the arrival of founder J.I. Case’s portable steam engine in 1869, we found ourselves at the heart of the road construction boom of the early 1900s. The path was set. Today, CASE is a game changer in construction equipment, financing, parts and service.

Revolutionary is nothing new to CASE, as innovations like the integrated loader/backhoe (1957), Ride Control™, over-center boom design and ProCare have shown. It’s this ingenuity and spirit that fuels our ongoing pursuit of building industry-leading performance and productivity into every machine throughout our full line of light, medium and heavy equipment.

All of this is backed by a portfolio of more than 10,000 OEM, REMAN and Gold Value parts, more than 350 North American dealer locations, and unmatched financial and insurance services that ensure the best support is always within reach. When all is said and done, our strength is only as solid as the machines we engineer, the support and service we give, and most importantly, the vote of confidence CASE customers have with every bit of it.

Specialized finance programs and flexible leasing packages put you in the driver’s seat of industry-leading CASE equipment, while no-nonsense warranties and comprehensive protection plans ensure that your equipment is protected. As the only finance company dedicated to CASE, we offer strong products and services designed around your unique needs and are the only ones supported by the helpful service professionals at your CASE dealer.

To learn more about CASE or for attentive customer service, visit your nearest dealer, call 1-866-54CASE6 or visit us online at CaseCE.com.

Form No. CCE201401CEXC

Always read the Operator’s Manual before operating any equipment. Inspect equipment before using it, and be sure it

is operating properly. Follow the product safety signs and use any safety features provided.NOTE: All engines meet current EPA emission regulations. NOTE: All specifications are stated in accordance with SAE Standards or Recommended Practices, where applicable.

Contains 10% post-consumer fiber

IMPORTANT: CASE Construction Equipment Inc. reserves the right to change these specifications without notice and without incurring any obligation relating to such change. Availability of some models and equipment builds vary according to the country in which the equipment is used. The illustrations and text may include optional equipment and accessories and may not include all standard equip-ment. Your CASE dealer/distributor will be able to give you details of the products and their specifications available in your area.

CASE Construction Equipment is biodiesel friendly.

©2014 CNH Industrial America LLC. All rights reserved. CASE is a trademark registered in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. CNH Industrial Capital is a trademark in the United States and many other countries, owned by or licensed to CNH Industrial N.V., its subsidiaries or affiliates. Printed in U.S.A.

CaseCE.com