customisable ip healthcare solutions · emergency call solution nessecom messaging the nessecom...

Customisable IP Healthcare Solutions

[email protected] | 1300 949 825 | www.nessecom.com

NesseCom IP systems are Australian made and designed.

NesseCom will provide your facility with fully intergrated solutions including:• IP Nurse Call• Call logging and reporting• Alarm monitoring and

Messaging.

• Campus messaging including SMS, email, DECT and traditional paging.

• Real Time Location Services (RTLS)

• Asset tracking• Staff duress• Fire integration• Security integration• 3rd party alarms

NesseCom in your facility

The ability to customise the NesseCom system allows your facility to move with emerging healthcare trends

and technologies. This feature rich, cost effective system is continually adapted to provide facilities with the latest tools

and capabilities to meet your ongoing challenges.


www.nessecom.com 1300 949 825 [email protected]

TCP IP connection to

IP Nurse Call Campus

NesseCom in your facility Your total IP-Based solutionBetter Communication - Easier Integration


Simple EfficiencyEmergency Call Solution

NesseCom Messaging The NesseCom messaging platform allows easy drag and drop interfaces along with user defined code groups for rapid critical messaging.

Messaging can be sent to contacts or groups connecting instantly to email, SMS, paging, wide area paging, DECT and VOIP outputs.

The messaging page allows switch board and staff stations access to:• Code calls• Pre-defined

• Message reporting• Staff rostering

NesseCom currently supports messaging out to:• Vocera• NEC• VOIP• Kirk• Pagers

• SPOK• Spectralink• Emails • Cisco• SMS


NesseCom’s user interfaces allow all levels of staff to interact easily with the system. From asset tracking to alarm boards, the NesseCom user interface is secure and intuitive.

NesseCom’s server topology allows any facility computer to become a command centre.

www.nessecom.com 1300 949 825 [email protected]

Screen Shots

NesseCom User InterfaceSimple EfficiencyEmergency Call Solution

The nurse call interface provides staff access to:• Rostering• Bed allocation• Messaging• Contact & Group

management• Statistical reporting

• System diagnostics• Swing wards• Alarm boards• Asset tracking• Network interfaces


Real Time Locational Service

The new NesseCom “Real Time Location Tracking” or RTLS uses state of the art locational technology to give highly accurate positioning of staff and patients.The RTLS module can be fitted with the NesseCom nurse call messaging system or be a standalone tracking and duress system.

NesseCom RTLS uses completely sealed staff and patient TAGS to ensure safety from cross infection. Staff TAGS are sensed as they enter

the room and can automatically cancel low level alarms and initiate a nurse presence.

When staff are rounding without an active call the system can sense the TAG and activate a nurse presence. When the staff member leaves the room, the nurse presence call is cancelled.

NesseCom RTLS has an MBB fitted to each room that locates TAGs and transmits their location wirelessly to the server. The MBB can interface with patient TV and over bed lights, removing the need for expensive TV modifications and third party relays.

NesseCom Staff RTLS TAG features:

• Staff Duress Button• Up to 100m coverage• Waterproof IP67 design• 3 – 5 Year battery life• Low battery warning

• Lightweight construction

• Programed to the USER

Staff

Patient

Asset

NesseCom Patient RTLS TAG features:

• Up to 100m coverage• Waterproof IP67 design• 3 – 5 Year battery life• Low battery warning


• Programed to the USER

NesseCom Asset RTLS TAG features:

• Up to 100m coverage• Waterproof IP67 design• 3 – 5 Year battery life• Low battery warning


• Programed to the ASSET


Real Time Locational Service Callpoints

Dry Area Call PointsNesseCom produces a modern nurse call point with back-lit buttons and infectious control silicons. Call plates come standard with bed mat alarm interfaces, RF pendant integration and RJ connections. Call points are also available in wireless.

Pull Cord CallpointCeiling mounted pull cord call plate to initiate an alarm call. Features:• Red LED for call activity.• Momentary action switch, reset when the cord is released.• Protection against moisture and dust.

Wireless Bed MatThe wireless bed mat sensor transmits an RF signal to the wireless receiver once a resident/patient moves out of bed. With no cables going from the bed mat to the call point, it gives the flexibility of moving the bed around the room without the need to unplug cables.

Silicon PendantsOur dual & single button pendants have a soft feel design made out of anti-bacterial silicon. Buttons are completely sealed with an IP67 rating.

Waterproof CallpointsWet area call points are designed to be used in wet areas (ensuite, toilet and shower room).The call point is completely water-proof with anti-microbial silicon buttons. The back-plate is sealed with high grade epoxy lacquer.


NesseCom ComponentsWireless Technology

Wireless Callpoint ReceiverReceivers are designed for ceiling or wall mounting with a rage of 80m. Receivers allow wireless call points to transmit alarms along with monitoring battery levels.

On low battery detection alarms and emails are provided to maintenance to provide a fail safe network.

RTLS Staff, Patient & Asset TagsRTLS tags operate on the latest Bluetooth technology and report into RMM/RMM-ICM’S providing accurate location information.

TAGS feature:• Long lasting battery• Multi functional alarms• IP67• Customised graphics• Lightweight• Durable

Wireless Wrist PendantWireless wrist pendants are water resistant and allow you the choice of wearing it on your wrist or around your neck. The wrist pendant has an exclusive ID encoded RF

transmitter which communicates with the wireless receiver in call points and RMM-ICM.

PIR2 in 1 PIR motion sensor (with narrow and wide beam options) now has a wireless version and triggers the call point via the wireless receiver box. It can be used as a room entry/exit, out of

bed or out of chair alarm just by moving the sensor to the position required.


NesseCom Components

Easygrip PendantThis pendant is water and dust proof with IP Rating of IP67. For infection control, the silicon button is made with an anti-microbial inhibitor using silver-nano technology.

The pendant’s profile enables an easy wrap around for the patient’s palm either for a left or right hand grip.

Wireless PendantThe wireless pendant is water resistant and allows patients freedom of movment. The Wrist Pendant has an exclusive ID encoded RF Transmitter which

communicates with the wireless receiver in call points and RMM-ICM.

Entertainment HandsetWith anti-microbial and water-proof features. The patent designed speaker and its shutter window make the handset dust-proof and water-proof whilst being rated at IP67. With its

aesthetic and lightweight design, yet durable construction, the handset feels great to grip and is easy to use.

Paddle PendantThe mechanical Paddle Pendant is for a resident/patient with low mobility. It is round and flat for comfort and ease of handling. Can be placed under any part of the body and the user only

needs to exert a small amount of pressure to activate the pendant.


Notification Devices

Over Door LightNesseCom Over Door Light is modern and stylish featuring:• Low power consumption

LEDS• Slimline design• Maintenance free• Flashing & steady enabled

Activity BoardThe Activity Board provides an interface in text and graphical format for all active alarms within the network.

The interface is provided through a web browser and can be used on a PC or IP enabled display.

Annunciator

Displays complete with adjustable speaker and automatic night tone capabilities. 18 tones are available along with 15 colours allowing greater differentiation between messages.


Notification Devices Technology

NesseCom ServerThe NesseCom server comes complete with software and has no ongoing licensing fees. The server connects together

the IP controllers, messaging, displays, activity boards and user interfaces.

Rack Mount ICMThe rack mount ICM supports • Manages 50 inputs & 70 outputs• Low power consumption

• Fully IP controlled & monitored• Supports new & legacy call

points

24v DC Power SupplyRack mounted and rated at 24V DC/7A the NesseCom power supply is designed to be robust and reliable.

Features:• DC & AC isolation switch• 1 RU compact design• Replaceable fuse• Battery backed

RMM - ICMThe RMM-ICM allows RTLS, asset tracking, staff duress, TV intergration, RF interface and call points to connected into

one hub. Located in a slimline medical grade enclosure the RMM-ICM is a cost effective complete solution.

RMMNesseCom Room Management modules are POE powered and have a sleek low profile. RMM’s are used for RTLS, asset tracking,

personal duress and room management/automation.

NesseCom Authorised Distributors Queensland

Data & Voice Queensland1300 883 151

[email protected]

I-Care Solutions+61 (0)450 509 535

[email protected]

New South WalesAdtex

02 9554 [email protected]

VictoriaKTR Group1300 669 507

[email protected]

South AustraliaData & Voice08 8240 1022

[email protected]

Tasmania KTR Group1300 669 507

[email protected]

customisable ip healthcare solutions · emergency call solution nessecom messaging the nessecom...

Documents