customer exhaust measurement sheetcorsa performance / gil marine - 140 blaze industrial parkway -...
TRANSCRIPT
The following diagrams illustrate the measurements we will need from you when ordering thru-hull exhaust components such as diverters or complete muffler systems. To make ordering easier, also have the following information ready when you call: Your boat year, make and model, engine size, (Mercury, Volvo, OMC), drive model and is it an EFI or carbureted engine. Under Swim Platform Applications For boats with built in or bolt-on swim platformsthat are not equipped with thru-hull exhaust,the following measurements will determine ifthere is enough space under the swim platformto install a standard system or if a custom systemwill be required. A Distance measured from the top of the drive (gimbal) housing to the underside of the swim platform. B Distance measured from the vertical center line of the drive (gimbal) housing to the upper corner of the drive cavity. For bolt-on swim platforms, measure the distance to the first mounting bracket. NOTE: When measuring distances on a built inswim platform, measure to the tangent of theradius as shown in the illustration to the right. >
Also applies to Twin Engine applications.
Location of Existing Exhaust Holes For boats that are equipped with thru-hullexhaust, the following measurements willdetermine if the exhaust holes are in thestandard location for your particular motoror if a custom system will be needed to meetthe existing exhaust holes. X Distance measured from the top of the drive (gimbal) housing to the horizontal center line of the exhaust hole. Y Distance measured from the vertical center line of the drive (gimbal) housing to the vertical center line of the exhaust hole.
Also applies to Twin Engine applications.
How to Measure Guide
CORSA - How To Measure
Under Swim Platform Applications
A Distance measured from the top of the drive (gimbal) housing to the underside of the swim platform.
B Distance measured from the vertical center line of the drive (gimbal) housing to the upper corner of the drive cavity. For bolt-on swim platforms, measure the distance to the first mounting bracket.
Also applies to Twin Engine applications.
The following diagrams illustrate the measurements we will need from you when ordering thru-hull exhaust components such as divertersor complete muffler systems. To make ordering easier, also have the following information ready when you call: Your boat year, make and model, engine size, (Mercury, Volvo, OMC), drive model and is it an EFI or carbureted engine.
For boats with built in or bolt-on swim platforms that DO NOT currently have thru-hull exhaust, the following measurements will determine if there is enough space under the swim platform to install a standard system or if a custom system will be required.
NOTE: When measuring distances on a built in swim platform, measure to the tangent of the radius as shown in the illustration.
Location of Existing Exhaust Holes
X Distance measured from the top of the drive (gimbal) housing to the horizontal center line of the exhaust hole.
Y Distance measured from the vertical center line of the drive (gimbal) housing to the vertical center line of the exhaust hole.
Also applies to Twin Engine applications.
For boats that currently DO HAVE thru-hull exhaust, the following measurements will determine if the exhaust holes are in the standardlocation for your particular motor or if a custom system will be needed to meet the existing exhaust holes.
CORSA Performance / GIL Marine - 140 Blaze Industrial Parkway - Berea, OH 44017 - 1-800-486-0999 - Fax 440-891-1868 www.corsaperformance.com - [email protected]
CORSA - How To Measure
Under Swim Platform Applications
A Distance measured from the top of the drive (gimbal) housing to the underside of the swim platform.
B Distance measured from the vertical center line of the drive (gimbal) housing to the upper corner of the drive cavity. For bolt-on swim platforms, measure the distance to the first mounting bracket.
Also applies to Twin Engine applications.
The following diagrams illustrate the measurements we will need from you when ordering thru-hull exhaust components such as divertersor complete muffler systems. To make ordering easier, also have the following information ready when you call: Your boat year, make and model, engine size, (Mercury, Volvo, OMC), drive model and is it an EFI or carbureted engine.
For boats with built in or bolt-on swim platforms that DO NOT currently have thru-hull exhaust, the following measurements will determine if there is enough space under the swim platform to install a standard system or if a custom system will be required.
NOTE: When measuring distances on a built in swim platform, measure to the tangent of the radius as shown in the illustration.
Location of Existing Exhaust Holes
X Distance measured from the top of the drive (gimbal) housing to the horizontal center line of the exhaust hole.
Y Distance measured from the vertical center line of the drive (gimbal) housing to the vertical center line of the exhaust hole.
Also applies to Twin Engine applications.
For boats that currently DO HAVE thru-hull exhaust, the following measurements will determine if the exhaust holes are in the standardlocation for your particular motor or if a custom system will be needed to meet the existing exhaust holes.
CORSA Performance / GIL Marine - 140 Blaze Industrial Parkway - Berea, OH 44017 - 1-800-486-0999 - Fax 440-891-1868 www.corsaperformance.com - [email protected]
CORSA - How To Measure
Under Swim Platform Applications
A Distance measured from the top of the drive (gimbal) housing to the underside of the swim platform.
B Distance measured from the vertical center line of the drive (gimbal) housing to the upper corner of the drive cavity. For bolt-on swim platforms, measure the distance to the first mounting bracket.
Also applies to Twin Engine applications.
The following diagrams illustrate the measurements we will need from you when ordering thru-hull exhaust components such as divertersor complete muffler systems. To make ordering easier, also have the following information ready when you call: Your boat year, make and model, engine size, (Mercury, Volvo, OMC), drive model and is it an EFI or carbureted engine.
For boats with built in or bolt-on swim platforms that DO NOT currently have thru-hull exhaust, the following measurements will determine if there is enough space under the swim platform to install a standard system or if a custom system will be required.
NOTE: When measuring distances on a built in swim platform, measure to the tangent of the radius as shown in the illustration.
Location of Existing Exhaust Holes
X Distance measured from the top of the drive (gimbal) housing to the horizontal center line of the exhaust hole.
Y Distance measured from the vertical center line of the drive (gimbal) housing to the vertical center line of the exhaust hole.
Also applies to Twin Engine applications.
For boats that currently DO HAVE thru-hull exhaust, the following measurements will determine if the exhaust holes are in the standardlocation for your particular motor or if a custom system will be needed to meet the existing exhaust holes.
CORSA Performance / GIL Marine - 140 Blaze Industrial Parkway - Berea, OH 44017 - 1-800-486-0999 - Fax 440-891-1868 www.corsaperformance.com - [email protected]
Name: __________________________________________ Date: ______________________________________
Dealer Name: ____________________________________ Phone: _____________________________________
Boat Manufacturer: ________________________________ Fax: _______________________________________
Model: __________________________________________ Year: _______________________________________
Sales Representative: ______________________________
Circle one of the following for each category below:
Engine Make : Mercury Volvo OMC Yamaha Other ____________
Catalyst: Yes or No
Engine Size: 4.3 302 305 350 351 6.2 454 502 496 500 EFI 525SC 575SC
# of Engines: Single Twin Triple
EFI: Yes or No
Drive Type: ______________________________________
Manifolds: Stock CMI GIL Other __________
System Type : Through Hull Splitter Diverter Q & Q II Q & Q + Other _____________
Transom Exit: Through Transom Side Exit 90° Tip Angle Tip Other ___________
X Dimension: _____________________
Y Dimension: ______________________
A Dimension: ______________________
B Dimension: ______________________
Transom Angle: _____________________ (for CMI or Special Systems)
Additional Comments ________________________________________________________________________________________ __________________________________________________________________________________________________________ __________________________________________________________________________________________________________ __________________________________________________________________________________________________________ __________________________________________________________________________________________________________ __________________________________________________________________________________________________________
Customer Signature ____________________________________________ Date _______________________________________
Sign and Fax or mail to the address below.
Customer Exhaust Measurement Sheet
Name: Date:
Dealer Name: Phone:
Boat Manufacturer: Fax:
Model: Year:
Engine Make : Mercury Volvo OMC Yamaha Other ____________ .
Engine Size: 4.3 302 305 350 351 6.2 454 502 496 500 EFI 525SC 575SC
# of Engines: Single Twin Triple
EFI: Yes or No .
Drive Type: ____________________________.
.
System Type : Through Hull Splitter Diverter Q & Q II Q & Q + Other _____________
Transom Exit: Through Transom Side Exit 90° Tip Angle Tip Other ___________
Manifolds: Stock CMI GIL other________________
Circle one of the following for each category below
CORSA Customer Exhaust Measurement Sheet
X Dimension: __________________________
Y Dimension: __________________________ .
A Dimension: __________________________ .
B Dimension: __________________________
Transom Angle: _______________________(for CMI or Special Systems)
Customer Signature
Additional Comments
Sign and Fax or Mail to the Address Below
Date
CORSA Performance / GIL Marine - 140 Blaze Industrial Parkway - Berea, OH 44017 - 1-800-486-0999 - Fax 440-891-1868 www.corsaperformance.com - [email protected]