Curs de ortodontie - Orthodontic seminars of California -

Dr. Larry Brown BS DDS, University of Southern California

Data : 14+15 si 16+17 iunie 2012 Locatie : Bucuresti (locatia va fi precizata ulterior)

Ore: 9:30 la 18:30 (2 coffee break + pranz)

Acest curs de 2+2 zile este structurat in prezentari (folosind materiale foto si video) si in workshopuri practice unde doctorii participanti vor invata si intelege modalitatile in care functioneaza sistemul de tratament Dr. Larry Brown, utilizand Straight

Wire. Workshpurile sunt hands-on si includ demonstratii live.

Pentru prima oara in Romania cu Dr. Brown un STUDY CLUB. Unde doctorii isi aduc propriile cazuri, iar discutiile se

desfasoara in jurul acestora.

Acest curs il va ajuta pe participant in a intelege Arta Ortodontiei Moderne care consta in abilitatea de a recunoaste problemele ortodontice specifice fiecarui pacient, in a da un diagnostic corect si in a trata pacientii la cel mai inalt nivel

ortodontic si estetic.

This 4-day course is organized with lectures, video, live demonstrations and workshops so that the participating doctors

will learn and understand how to use Dr. Brown’s system of Straight Wire orthodontic treatment.

During Day 1 and Day 2 the participating doctors will learn:

• The correct techniques for Straight Wire Appliance (SWA) “direct bracketing” and for molar banding. • The various “bracketing schemes” that are used in treating different types of malocclusions in order to obtain the

desired result will be learned. • Discussion of the use of “ligating” and “self-ligating” brackets • The arch wire system of the SWA:

1. The Heat Activated NiTi (HA NiTi) Wires use the lightest forces available today, are super elastic and obtain the best

results. These are used for leveling and for finishing. 2. Intrusion/bite opening wires

3. The 19x25 steel wire – “The working Wire” --- used during the phase where heavier forces are used.

4. How to place, fit and adjust the wires. • The many auxiliaries of the SWA are also placed (see below).

Hands-on Workshops consist of the placement of:

• brackets

• molar bands and molar tubes

• Arch Wires (different types)– placing and adjusting

• intra-oral elastics

• molar bend-backs

• NiTi Tanspalatal Expander

Video or live demonstrations:

• various separators

• ligature ties

• Kobi hooks

• open-coil spring

• closed-coil (closing) springs

• chain elastic

Ligating as well as Self-ligating brackets will be presented and discussed

Indirect bracketing technique – the advantages and disadvantages will be discussed.

Day 1 and 2 June 14, 15

Lecture: The Straight Wire Appliance (SWA)

• “Bracketing for Success” using the bracketing system of Dr Brown. • How and why it works so well.

• Discussion, instruction and video demonstration on the placement of the brackets, molar bands and molar tubes of the

SWA using light-cure adhesives. • The biomechanics and the placing of the basic arch wires used in the “leveling/aligning phase” of most cases.

• There is instructional video showing these procedures on an actual patient, which also shows which instruments are to

be used.

Hands on Workshop on the typodont:

• Placing the brackets and molar bands and molar tubes (using non-mix light cure adhesives).

• The arch wires used in the “leveling/aligning phase” of treatment for most cases will be fitted and ligated in place.

• Placing of molar bend-backs

• Video or live demonstrations will show the placement of:

1. using separators (3 types) 2. elastomeric and metal ligature ties

3. Kobi hooks 4. open-coil spring

5. chain elastic

Lecture:

There will be a brief lecture on the biomechanics and the use of CLII and CLIII intra-oral elastics for the correction of

malocclusions and for space closure in extraction cases.

“Special elastics” for specific situations such as settling-in the occlusion or closing-down an open bite.

Biomechanics of CLI forces - CLI intra-maxillary forces used for space closure.

You will receive a comprehensive syllabus on elastic therapy for future reference.

Lecture:

19x25 steel wire – “The working Wire”.

Discussion, instruction and live demonstration on how to adjust the 19x25 steel wire – “The working Wire”

• “wire forming”

• “wire torquing”

• “de-torquing”

Hands-on Workshop:

• Adjusting the 19x25 steel wire as described above.

Hands-on workshop:

• CLI, CLII CLIII and “special” elastics

• 200gram NiTi Closing springs for CLI space closure

• Chain elastics.

Lecture and Workshop:

• The use of the 16x22 NiTi intrusion wire .

1. The pre-formed “16x22 NiTi intrusion wires are used for incisor intrusion, bite opening and arch leveling

in a “2x4 set-up” mixed dentition case. • The use of the NiTi Reverse Curve Wires” (RCS).

1. The pre-formed “RCS” wires are used for incisor intrusion, bite opening and arch leveling in adolescent and

adult cases.

• Discussion of the use of the “Heat Activated Nitanium (NiTi) Trans-palatal Expander” and the “Heat Activated

Nitanium (NiTi) Trans-palatal Molar Rotator”. o These are easy to place,

o biomechanically provide an “optimal, light and constant force”

o Do not need adjustment once they are in place.

Workshop on the typodont:

• Placing and adjusting a 16x16 Pre-formed UAW

• Placing a 17x25 NiTi RCS wire.

• Placing a “Heat Activated Nitanium (NiTi) Trans-palatal Molar Rotator”

Lecture:

If time allows, there will be Clinical case presentations of patient cases

• Treating CLII and CLIII malocclusion patients using the SWA.

• Treatment of an extraction case using CLI “sliding mechanics” and “en masse” space closure.

After this session is finished, the participating dentists, even those who have never placed or used the SWA before, will be

begin to be able to visualize how the SWA is used to treat malocclusions. They will also “see” their patients as never before,

and they will understand the systematic treatment mechanics used in the treatment of their patients.

Day 3 June 16

The art of modern orthodontics - creating dazzling smiles and beautiful Faces

The treatment system of Dr Brown

• Artistic, logical, easy to do with consistent, beautiful orthodontic and esthetic results.

The art of diagnosis for Straight Wire Appliance (SWA) therapy.

Artistic Treatment planning

• Combining the artistic approach with the scientific data.

Mechanical treatment

• The correct use of the SWA and its auxiliaries.

• Using Optimal “smart” forces (light, constant Heat activated) to reach our treatment goals.

Lecture:

Clinical case presentations:

Diagnostic analysis, treatment planning and mechanical treatment planning of many different patients.

• Mixed dentition ages CLI, CLII CLIII

• Adolescent ages CLII and CLIII

• Adult ages CLII and CLIII.

There will be deep bite cases and open-bite cases.

These cases will demonstrate the time-tested, systematic and logic approach to patient treatment using Dr.

Brown’s system of SWA orthodontics

Day 4 June 17

Study Club, Dr. Larry Brown Diagnosis, treatment planning and problem solving during the treatment of young patients and adults Study Club meetings are arranged so that the participating doctors in the club have a chance to discuss their personal

cases, either new cases or cases “in progress”.

All can benefit from Dr. Brown’s 30 years of experience using of the SWA (Straight Wire Appliance).

Each participating doctor in the course can bring 2 of their own cases for consultation and personal coaching and from Dr Brown. Certain of these cases, chosen by Dr. Brown because of their interesting features, will be projected on the Screen so that everyone in the group can benefit from the discussion.

If time permits, Dr. Brown will give personal consultation for additional cases.

In order for Dr. Brown to be able to give a correct diagnosis and proper coaching, the doctors are asked to bring a USB

stick/Pen drive with the necessary facial photos (front and profile, natural lip position and smiling), photos of the 5 views of

the study models, cephalometric x-ray and tracing, panoramic x-ray. If the photos are with brackets already in place, please

provide the necessary written info as to what bracketing scheme was used, and the wires or other types of appliances that

are in place at the time of the photos.

The doctors are also asked to provide a written description of the important findings of each case, a general “Global Treatment Plan” and to provide a more detailed month by month Treatment Plan. This exercise is important for the

education of the doctor.

During this part of the course, Dr Brown could project on the screen examples of his personal cases to help

the doctors visualize the treatment mechanics needed in their own cases.

Types of cases that can be discussed:

• Young patients – mixed dentition and adolescent

• Adult patients – extraction and non-extraction

• Maxilo-facial Surgical combined with orthodontics

During the discussion of these various clinical cases by Dr Brown, most of the following subjects will be discussed:

The basic theory on « Human Growth Patterns » and the “development of orthodontic problems”

“The Esthetic Diagnosis” of Dr Brown

“Study model” evaluation

The Cephalometirc x-ray and tracing analysis

The basics of the biomechanics involved in the treatment

The details of the actual mechanical treatment of the patient

The potential problems to watch out for during the treatment

Finishing the case to obtain an optimal occlusion along with an esthetic harmony of the face, jaws and teeth.

The “mechanics” used to obtain an optimal occlusion along with an esthetic harmony of the face, jaws and

teeth

Mechanical treatment plans of the patient cases:

This part of the discussion will concern (when applicable to the cases dicussed):

• The correct techniques for Straight Wire Appliance (SWA) “direct bracketing” and molar banding. • The various “bracketing schemes” that are used in treating different types of malocclusions • How to recognize and correct bracketing mistakes

• The use of “ligating” and “self-ligating” brackets • The arch wire system of the SWA - How to place, fit and adjust the wires:

1. The Heat Activated NiTi (HA NiTi) Wires use the lightest forces available today, are super elastic and obtain the best results. These are used for leveling and for finishing.

2. Intrusion wires – 16x16 Utility Arch Wire, 16x22 NiTi Intrusion Wire, 17x25 NiTi RCS wire 3. The 19x25 and 21x25 steel wires – “The Working Wires” – used during the phase where heavier forces are used.

• The other various basic auxiliaries of the SWA – springs, hooks, chain elastics, lock-stops, et all

• Thermal activated auxiliary appliances such as:

1. The NiTi Transpalatal Expander/Molar Rotator

2. The NiTi Twin Force Bite Corrector • Intra-oral Elastic forces for the correction of CLII and CLIII malocclusions, for Space Closure in extraction cases and for

Finishing

1. NiTi Coil springs 2. Intra oral elastics CLI, CLII, CLIII and finishing elastics

• Mini screws for additional anchorage

• Maxillary 1st molar Distalization systems

1. Head Gear

2. 300 gram Coil springs combined with Lock-Stops 3. Uses of Mini-screws for tooth distalization

4. Sliding yoke 5. Laboratory processed distalization appliances

• Impacted teeth

• Slicing/Stripping

• Wire “bending” for finishing

Un material complet despre curs va fi dat medicilor participanti.

Dupa curs veti intelege ca prin folosirea sistemului Dr. Brown – Ortodontia Estetica,

medicul curant va fi capabil sa obtina pentru fiecare pacient un rezultat

estetic superior si o ocluzie optima. Cu ajutorul sistemului Dr.Brown pentru

tratamentul ortodontic veti fi capabili

sa obtineti pentru pacientii Dumneavoastra: • ocluzie optima

• armonie estetica intre buze, dantura si arcade

• Tratarea pacientilor tineri, in general,

fara extractia dintilor, folosind “Modificarile de eruptie”

• estetica faciala si un zambet frumos si placut

TAXA DE PARTICIPARE pt. medici rezidenti

470 EUR (TVA inclus). DAY 1+2 - bracketing.

310 EUR (TVA inclus). DAYS 3+4.

620 EUR (TVA inclus). 4 DAYS.

TAXA DE PARTICIPARE pt. medici

520 EUR (TVA inclus). DAY 1+2 - bracketing.

350 EUR (TVA inclus). DAYS 3+4.

690 EUR (TVA inclus). 4 DAYS.

caietul cursului complet tiparit color;

typodontul si toate materialele (raman cursantului !!) ;

pauze de cafea si pranz in toate zilele;

un set de produse utile in cabinetul ortodontic.

Limba oficiala a cursului : ENGLEZA.

Detalii la tel: 021.230.2827 sau 0769.059.900 sau pe www.dent-a-america2000.ro