Curs de ortodontie

- Orthodontic

seminars of California -

Dr. Larry Brown BS DDS, University of Southern California

Data : 15 si 16+17+18 mai 2013 Locatie : Bucuresti, Hotel Caro.

Ore: 9:30 la 18:30 (2 coffee break + pranz)

Acest curs de 1+3 zile este structurat in prezentari (folosind materiale foto si video) si in workshopuri practice unde doctorii participanti vor invata si intelege modalitatile in care functioneaza sistemul de tratament Dr. Larry Brown, utilizand Straight

Wire. Workshpurile sunt hands-on si includ demonstratii live.

Dupa succesul de la ultima prezentare din Romania, Dr. Brown revine cu un STUDY CLUB. Unde doctorii isi aduc propriile

cazuri, iar discutiile se desfasoara in jurul acestora.

Acest curs il va ajuta pe participant in a intelege Arta Ortodontiei Moderne care consta in abilitatea de a recunoaste problemele ortodontice specifice fiecarui pacient, in a da un diagnostic corect si in a trata pacientii la cel mai inalt nivel

ortodontic si estetic.

“The Art of Modern Orthodontics – Creating Dazzling Smiles and Beautiful Faces”

Orthodontic Training Seminars - The Straight Wire Appliance

This 4-day course is organized with lectures, video, live demonstrations and workshops so that the participating doctors will learn and understand how to use Dr. Brown’s system of Straight Wire Appliance orthodontic treatment.

May 15: The Straight Wire Appliance (SWA)

May 16, 17, 18: Treatment of CLIII cases

Day 1: May 15

The participating doctors will learn:

• The correct techniques for SWA “direct bracketing” and for molar banding.

• The various “bracketing schemes” that are used in treating different types of malocclusions in order to obtain the desired result will be learned.

• Discussion of the use of “ligating” and “self-ligating” brackets.

• The arch wire system of the SWA:

1. The Heat Activated NiTi (HA NiTi) Wires use the lightest forces available today, are super elastic with superior “memory” and obtain the best results. These are used for leveling and for finishing.

2. The 19x25 steel wire – “The working Wire” --- used during the phase where heavier forces are used.

3. How to place, fit and adjust the wires.

• The many auxiliaries of the SWA are also placed (see below).

Hands-on Workshops:

• Bracketing

• Molar bands and molar tubes

• Arch Wires (different types)– placing and adjusting

• molar bend-backs

Video or live demonstrations:

• various separators

• ligature ties

• Kobi hooks

• open-coil spring

• closed-coil (closing) springs

• chain elastic

Ligating as well as Self-ligating brackets will be presented and discussed

Indirect bracketing technique – the advantages and disadvantages will be discussed.

Program:

Day 1 May 15

Lecture: The Straight Wire Appliance (SWA)

• “Bracketing for Success” using the bracketing system of Dr Brown.

• How and why it works so well.

• Discussion, instruction and video demonstration on the placement of the brackets, molar bands and molar tubes of

the SWA using light-cure adhesives.

• The biomechanics and the placing of the basic arch wires used in the “leveling/aligning phase” of most cases.

• There is instructional video showing these procedures on an actual patient, which also shows which instruments are to be used.

Hands on Workshop on the typodont:

• Placing the brackets and molar bands and molar tubes (using non-mix light cure adhesives).

• The arch wires used in the “leveling/aligning phase” of treatment for most cases will be fitted and ligated in place.

• Placing of molar bend-backs

• Video or live demonstrations will show the placement of:

1. using separators (3 types)

2. elastomeric and metal ligature ties

3. Kobi hooks

4. open-coil spring

5. chain elastic

Lecture:

19x25 steel wire – “The working Wire”.

Discussion, instruction and live demonstration on how to adjust the 19x25 steel wire – “The working Wire”

1. “wire forming”

2. “wire torquing”

3. “de-torquing”

Hands-on Workshop:

1. Adjusting the 19x25 steel wire as described above.

Days 2 - 4 May 16, 17, 18

Lecture:

Diagnosis, treatment planning and the mechanics used in the treatment of CLIII patients.

• Young patients – mixed dentition and adolescent ages

• Adult patients

• Extraction cases: how to manage anchorage and space closure for a beautiful esthetic and occlusal result.

• Surgical cases: how to differentiate a non-surgical case from a surgical case. Treatment planning – working

together with the surgeon.

The art of modern orthodontics - creating dazzling smiles and beautiful Faces

The treatment system of Dr. Brown:

Artistic, logical, simplistic and providing consistent and beautiful orthodontic and esthetic results.

Diagnosis for SWA therapy

1. Combining the artistic approach with the scientific data.

2. Combining the use of the 6 Traits of malocclusion with the Esthetic diagnosis.

Mechanical treatment planning

1. The correct use of the SWA and its auxiliaries based on 30 years of experience.

2. Using optimal “smart” forces (light, constant, Heat Activated) to reach our treatment goals.

Lecture:

Clinical case presentations:

Diagnostic analysis, treatment planning and mechanical treatment planning of many different patients with different types of CLIII malocclusion.

• Mixed dentition ages CLIII

• Adolescent ages CLIII

• Adult ages CLIII.

These cases will demonstrate the time-tested, systematic and logical approach to patient treatment using Dr. Brown’s system of SWA orthodontics.

There will be an explnation on the biomechanics and the use of CLIII intra-oral elastics for the correction of CLIII malocclusions and for space closure in extraction cases.

“Special elastics” for specific situations such as settling-in the occlusion or closing-down an open bite.

Biomechanics of CLI forces - CLI intra-maxillary forces used for space closure.

All participants will receive a comprehensive syllabus on elastic therapy for future reference.

Hands-on workshop – the placing of:

• CLI, CLII CLIII and “special” elastics

• 200 gram NiTi Closing springs for CLI cuspid distalization and space closure

• Combining CLI and CLIII forces using the 10 Hour Force Theory.

• Chain elastics.

Lecture and Workshop:

• Discussion of the use of the “Heat Activated Nitanium (NiTi) Trans-palatal Molar Rotator” for palatal

expansion and molar rotation in CLIII cases.

1. These are pre-fabricated, easy to place and require no adjustment once they are in place,

2. Biomechanically provide an “optimal, light and constant force”

Workshop on the typodont:

• Placing a “Heat Activated Nitanium (NiTi) Trans-palatal Molar Rotator”

Diagnosis, treatment planning and problem solving during the treatment of young patients and adults:

For the last hour of Days 2, 3, 4, the participating doctors have a chance to discuss their personal cases, either new cases or cases “in progress”. Each participating doctor in the course can bring 1 of their own cases for consultation and

personal help from Dr. Brown. Certain of these cases, chosen by Dr. Brown because of their interesting features, will

be projected on the Screenso that everyone in the group can benefit from the discussion.

If time permits, Dr. Brown will give personal consultation for additional cases.

All can benefit from Dr. Brown’s 30 years of experience using of the SWA.

In order for Dr. Brown to be able to give a correct diagnosis and the proper help, the doctors are asked to bring a USB stick/Pen drive with the necessary facial photos (front and profile, natural lip position and smiling), photos of the 5 views of the study models, cephalometric x-ray and tracing, panoramic x-ray. If the photos are with brackets already in place, please provide the necessary written info as to what bracketing scheme was used and the wires or other types of appliances that

are in place at the time of the photos.

The doctors are also asked to provide a written description of the important findings of each case, a general “Global Treatment Plan” and to provide a more detailed month by month Treatment Plan. This exercise is important for the

education of the doctor.

During this part of the course, Dr Brown could project on the screen examples of his personal cases to help the doctors visualize the treatment mechanics needed in their own cases.

Types of cases that can be discussed:

• Young patients – mixed dentition and adolescent

• Adult patients – extraction and non-extraction

• Maxilo-facial Surgical combined with orthodontics

During the discussion of these various clinical cases by Dr Brown, most of the following subjects will be discussed:

The basic theory on « Human Growth Patterns » and the “development of orthodontic problems”

“The Esthetic Diagnosis” of Dr Brown

“Study model” evaluation

The Cephalometirc x-ray and tracing analysis

The basics of the biomechanics involved in the treatment

The details of the actual mechanical treatment of the patient

The potential problems to watch out for during the treatment

Finishing the case to obtain an optimal occlusion along with an esthetic harmony of the face, jaws and teeth.

The “mechanics” used to obtain an optimal occlusion along with an esthetic harmony of the face, jaws and teeth:

Mechanical treatment plans of the patient cases:

This part of the discussion will concern (when applicable to the cases discussed):

• The correct techniques for Straight Wire Appliance (SWA) “direct bracketing” and molar banding.

• The various “bracketing schemes” that are used in treating different types of malocclusions

• How to recognize and correct bracketing mistakes

• The use of “ligating” and “self-ligating” brackets

• The arch wire system of the SWA - How to place, fit and adjust the wires:

1. The Heat Activated NiTi (HA NiTi) Wires use the lightest forces available today, are super elastic and obtain the best results. These are used for leveling and for finishing.

2. Intrusion wires – 16x16 Utility Arch Wire, 16x22 NiTi Intrusion Wire, 17x25 NiTi RCS wire

3. The 19x25 and 21x25 steel wires – “The Working Wires” – used during the phase where heavier forces are used.

• The other various basic auxiliaries of the SWA – springs, hooks, chain elastics, lock-stops, et all

• Thermal activated auxiliary appliances such as:

1. The NiTi Transpalatal Expander/Molar Rotator

2. The NiTi Twin Force Bite Corrector

• Intra-oral Elastic forces for the correction of CLII and CLIII malocclusions, for Space Closure in extraction cases and

for Finishing

1. NiTi Coil springs

2. Intra oral elastics CLI, CLII, CLIII and finishing elastics

• Mini screws for additional anchorage

• Maxillary 1st molar Distalization systems

1. Head Gear

2. 300 gram Coil springs combined with Lock-Stops

3. Uses of Mini-screws for tooth distalization

4. Sliding yoke

5. Laboratory processed distalization appliances

• Impacted teeth

• Slicing/Stripping

• Wire “bending” for finishing

Un material complet despre curs va fi dat medicilor participanti.

Dupa curs veti intelege ca prin folosirea sistemului Dr. Brown – Ortodontia Estetica,

medicul curant va fi capabil sa obtina

pentru fiecare pacient un rezultat estetic superior si o ocluzie optima.

Cu ajutorul sistemului Dr.Brown pentru tratamentul ortodontic veti fi capabili

sa obtineti pentru pacientii Dumneavoastra: • ocluzie optima

• armonie estetica intre buze, dantura si arcade

• Tratarea pacientilor tineri, in general,

fara extractia dintilor, folosind “Modificarile de eruptie”

• estetica faciala si un zambet frumos si placut

TAXA DE PARTICIPARE pt. medici rezidenti

315 EUR (TVA inclus). DAY 1 - bracketing.

425 EUR (TVA inclus). DAYS 2+3+4.

669 EUR (TVA inclus). 4 DAYS.

TAXA DE PARTICIPARE pt. medici

349 EUR (TVA inclus). DAY 1 - bracketing.

469 EUR (TVA inclus). DAYS 2+3+4.

699 EUR (TVA inclus). 4 DAYS.

caietul cursului complet tiparit color;

typodontul (pentru primul modul) si toate materialele(inclusiv molar rotatorul pentru modulul doi) raman cursantului;

pauze de cafea si pranz in toate zilele;

un set de produse utile in cabinetul ortodontic.

*Participantii care aleg doar modulul doi trebuie sa isi aduca propriul typodont pentru montarea molar rotatorului. Inelele pentru molari necesita tubusoare palatinale sudate.

Limba oficiala a cursului : ENGLEZA.

Detalii la tel: 021.230.2827 sau 0769.059.900 sau pe www.dent-a-america2000.ro