curriculum vitae i. personal particulars ii. …
TRANSCRIPT
1
CURRICULUM VITAE
I. PERSONAL PARTICULARS Name Dr. Mohd Rashdan bin Saad
Current Position Faculty / Department
Senior Lecturer (DS51)
Department of Mechanical Engineering,
Faculty of Engineering
II. ACADEMIC AND PROFESSIONAL QUALIFICATIONS (Please list all academic qualifications, from your first degree, in chronological order)
Year Degree Discipline University
2013
2009
Doctor of Philosophy (PhD)
Masters of Engineering (MEng)
Aerospace Engineering
Aerospace Engineering
The University of Manchester, UK
The University of Manchester, UK
III. TITLES OF POSTGRADUATE THESES WRITTEN No. TITLES OF POSTGRADUATE THESES
1 Experimental Studies on Shock Boundary Layer Interactions using Micro-Ramps at Mach 5 (Ph.D Thesis)
UNIVERSITI PERTAHANAN NASIONAL MALAYSIA
JABATAN PENDAFTAR
Kem Sungai Besi Tel : 03-90513400 http://www.upnm.edu.my 57000 Kuala Lumpur Fax : 03-90581536
UPNM.PEND.HRM.001
MS ISO 9001:2008 REG NO KLR -0500197 Kewajipan, Maruah, Integriti
2
IV. WORK EXPERIENCE (Please list your relevant experience in chronological order) Year Position Field of Work Place of Work 2007 2009 - 2013 2009 – 2013 2014 – Now
Internship Trainee Demonstrator & Tutor Tutor Senior Lecturer
Aircraft Maintainance, Repair & Overhaul (MRO) Laboratories & Academic Tutoring Laboratories & Academic Tutoring Lecturing, Student Supervision, Research & Publication
AIROD Ltd. Malaysia The University of Manchester, UK Faculty of Engineering, UPNM Faculty of Engineering, UPNM
1.0 TEACHING AND SUPERVISION
1.1 Undergraduate Courses
(Please list in chronological order and state: course title, semester and year)
No Course Title Semester Year
1 Computer Aided Engineering (CAE) EMM 4433
1
1
1
1
1
1
2013-2014
2014-2015
2015-2016
2016-2017
2017-2018
2018-2019
2 Engineering Laboratory EML 2802 1
1
2013-2014
2017-2018
3
3 Fluid Mechanics I EMM2163
2
2
2
2
2013-2014
2014-2015
2015-2016
2016-2017
4 Advanced Engineering Laboratory EML 3852
2
2
2
2013-2014
2015-2016
2016-2017
5 Mechanical Engineering Drawing EMP 1153
2
2
2
2013-2014
2014-2015
2015-2016
6 Engineering Mathematics I (Calculus III) EFA 1103 2
1
2016-2017
2018-2019
7 Aerodynamics & Flight Mechanics EME 4633 2 2016-2017
8 Fluid Mechanics II EMM4603 3 2016-2017
1.2 Postgraduate Courses
(Please list in chronological order and state: course title, semester and year)
No Course Title Semester Year
1 Compressible Flow EMM 4373
(Master of Mechanical Engineering) 1 1
2017/2018 2018/2019
2 Advanced Aerodynamics EMA 4444
(Master of Aeronautics Engineering) 2 2017/2018
4
1.3 Ph.D Supervision
(Please list in chronological order and state: name of student, year project title and status)
No Name of Student Project Title Year Role (Main /
Co- Supervision)
Status Completed Submitted In Progress
University
1 Kdr. (B) Mohd Arif bin Ahmad TLDM
Mathematical Model to Determine the Best Course to
Steer in Heavy Seas 2016 Co-Supervisor In Progress UPNM
2 Lt. Kol. Shahril bin Ahmad
To Design Mid-Course Guidance for Cruise Missile
using Local Tactical Algorithms and Environments
2015 Co-Supervisor In Progress UPNM
1.4 PhD.External/Internal Examination
(Please list in chronological order and state: name of student, year project title and status)
No Name of Student Project Title Year Role (Main /
Co- Supervision)
Status Completed Submitted In Progress
University
N/A
1.5 Supervision (Coursework and Project)
(Please list in chronological order and state: name of student, year, project title and status)
No Name of Student Project Title Year Role (Main /
Co- Supervision)
Status Completed Submitted In Progress
University
1 Muhammad Afiq bin Mohd Yussof
(B.Eng)
Configuration of Buoy Arrays in Wave Energy
Converter for Power Generation
2018 Main In Progress UPNM
5
2 Mubin Mustaza bin Iskandar
(B.Eng)
Micro Vertical Axis Wind Turbine for Low Wind
Speed Power Generation 2018 Main In Progress UPNM
3 Uma Sangari Perumal
(Dissertation Master of Aeronautical Engineering)
Micro Vortex Generator to Control Flow
Separation on Hull-Fuselage of WIG Craft
2018 Main In Progress UPNM
4 Shahira binti Baharudin
(Intern Uni. of Strathclyde) Portable Hydropower
Turbine 2018 Main Completed UPNM
5 Nur Asma binti Nordin
(Intern Uni. of Strathclyde) Portable Hydropower
Turbine 2018 Main Completed UPNM
6 Muhammad Haziq Idraki bin Shahidin
(Intern Uni. of Auckland)
Aerodynamic Coefficients Validation of 3D Printed Wind Tunnel
Models
2018 Main Completed UPNM
7 Muhammad Farid Syazwan bin Hassan
(Intern Uni. of Auckland)
Design of Low-Cost Quadcopter UAV Platform using 3D
Printing Technology
2018 Main Completed UPNM
8
Lt. Dinesh Kumar A/L Subramaniam
(Dissertation Master of Mechanical Engineering)
Finite Element Analysis of Lower Arm of Double Wishbone and Structure
Optimization for Armoured Vehicle 8X8
“Gempita”
2017 Main Completed UPNM
9 Irahasira binti Said
(B.Eng)
Effect of Flow Control on Wing-In-Ground Craft
Hull-Fuselage for Improved Aerodynamics
Performance
2017 Main Completed UPNM
10 Mohan Kumar A/L Poonaesparan
(B.Eng)
The Effect of Streamwise Location of Micro-Vortex Generator on Airfoil for
Drag Reduction in Subsonic Flow
2017 Main Completed UPNM
6
11 Mohd Zulzafri bin Zolkarnain
(B.Eng)
Cavity Flow Separation Control using 3D-Printed
Riblets 2017 Main Completed UPNM
12 Muhammad Hafiz bin Mahmod
(B.Eng)
Effect of Winglet Configurations on Wing-
In-Ground Craft on Aerodynamics Performance
2017 Main Completed UPNM
13 Muhammad Zulhilmi bin Ahmad Tarmizi
(B.Eng)
The Effect of Winglet & Flow Control on Vertical
Axis Wind Turbines 2017 Main Completed UPNM
14 Nur ‘Izzati binti Ismail
(B.Eng)
Aerodynamics Study of Various Skyscrapers in
KL: Effects on Occupants and
Pedestrians Comfort
2017 Main Completed UPNM
15
Muhammad Zuhairi bin Mohd Aliashak
(Intern University of Auckland)
Microvane in Controlling Noise on Open Cavity
Flow 2017 Main Completed UPNM
16
Ahmad Shaqir Amin bin Samsuddin
(Intern University of Auckland)
3D Printing Technology in Cavity Flow
Separation Control 2017 Main Completed UPNM
17
Ali Zainal Abidin bin Muhammad Nasib
(B.Eng)
The Effect of Jet Blowing in Boundary Layer
Separation Contol on Airfoil in Subsonic Flow
2016 Main Completed UPNM
18 Isma Fildza Hazry bin Ismail
(Intern University of Auckland)
Wind Tunnel Model Manufacturing using
Poseidon X 3D Printer 2016 Main Completed UPNM
19
Muhammad Afiq bin Md Salleh
(Intern University of Auckland)
Micro Vane in Controlling Cavity Flow Separation
2016 Main Completed UPNM
7
20 Amenizal bin Sani
(B.Eng)
The Effect of Suction on Airfoil Leading Edge to
Decrease Flow Separation
2016 Main Completed UPNM
21 Arifudin bin Ahmad
(B.Eng)
Aerodynamics Performance of Cruise Missile Flying Above
Local Terrain
2016 Main Completed UPNM
22 Muhammad Shafiq bin Lood
(B.Eng)
Low Angle of Attack Flow Control of Missile in
Subsonic Flow 2016 Main Completed UPNM
23
Muhammad Taufiq bin Jumahadi
(Intern University of Auckland)
Wind Effect on High-Rise Building Configurations
for Haze Reduction 2016 Main Completed UPNM
24 Baljit Singh Sidhu A/L Garmit Singh
(B.Eng)
Riblets for Airfoil Drag Reduction in Subsonic
Flow 2015 Main Completed UPNM
25 Mohd Johan bin Ismail
(B.Eng)
Micro Airtab in Controlling Cavity Flow
Separation 2015 Main Completed UPNM
26 Mohd Soffian bin Jamaludin
(B.Eng) Micro-Vane in Controlling Cavity Flow Separation
2015 Main Completed UPNM
27 Muhamad Aswad bin Abd. Rahman
(B.Eng)
Splitter Plate for Wind Turbine Airfoil Drag
Reduction 2015 Main Completed UPNM
8
1.6 M.Sc (by Research)
(Please list in chronological order and state: name of student, year, project title and status)
No Name of Student Project Title Year Role (Main /
Co- Supervision)
Status Completed Submitted In Progress
University
1 Nur ‘Izzati binti Ismail Configuration Study of
Wave Energy Converter for Power Generation
2018 Main In Progress UPNM
2 Muhamad Aiman bin Jalani Buoy Geometry
Optimization for Wave Energy Converter Device
2018 Co-Supervisor In Progress UPNM
3 Muhammad Taufiq bin Jumahadi
Hybrid Flow Control on Airfoil for Drag Reduction
in Subsonic Flow 2017 Main In Progress UPNM
4 Baljit Singh Sidhu
Computational Study on Micro-Ramps in
Controlling Shock Boundary Layer
Interaction ath Mach 5
2016 Main In Progress UPNM
5 Muhammad Zuhairi bin Mohd Aliashak
Microvane in Controlling Noise on Open Cavity
Flow 2018 Main In Progress UPNM
6 Maj. Mahadhir bin A. Rahman TUDM
Analysis of Flow Prediction Performance on X-Aircraft with Store-
X
2016 Co-Supervisor In Progress UPM
7 Noor Azman bin Dollah
Aeroelastic Investigation of Carbon nanotube
Reinforced Kevlar for Inflatable Wing
2016 Co-Supervisor In Progress UPNM
9
1.7 M.Sc. External/Internal Examination
(Please list in chronological order and state: name of student, year, project title and status)
No Name of Student Project Title Year Role (Main /
Co- Supervision)
Status Completed Submitted In Progress
University
N/A
2.0 RESEARCH AND PUBLICATION
2.1 Research Projects
(Please list in chronological order and state: title, list of researchers, grant/year, source/amount, date/duration and status) (Please bold your name)
No Title List of Rresearchers Principal Members
Grant Year
Source Amount
Status Completed In Progress
1
Mechanical Design of Heave Buoy Wave Energy
Converter
Principal: Dr. Mohd Rashdan bin Saad
Members: Ir. Dr. Mohd Rosdzimin bin Abdul
Rahman, Dr. Mohd Faizal bin Abdullah, Ir. Dr.
Balamurugan A. Gurunathan, Prof. Ir. Dr.
Wan Ali bin Wan Mat, Lt Kdr (B) Mohd Azzeri bin Md
Naiem
2018
Kementerian Tenaga
Teknologi Hijau dan Air
(KeTTHA)
RM1,008,400
In Progress
10
No Title List of Rresearchers Principal Members
Grant Year
Source Amount
Status Completed In Progress
2 Application of
Riblets on Patrol Boats
Principal: Ir. Dr. Zambri Harun (UKM)
Members: Dr. Mohd Rashdan Saad, Lt. Wan Norhafizan Wan Rohizan TLDM, Dr. Mohammad
Rasidi Mohammad Rasani (UKM), Dr. Suraya Sharil
(UKM)
2017 PRGS (KPT)
RM96,000 In Progress
3 Transformasi
UPNM Menjadi Kampus Hijau
Principal: Dr. Mohd Rashdan Saad
Members: Kapten Ahmad Hamizi Ahmad Kamal
(TUDM), P.M. Dr. Mohd Taufiq Ishak, Dr. Fakroul
Ridzuan Hashim, Dr. Azam Che Idris
2017 GPJP (UPNM)
RM45,000 In Progress
4
The correlation of trapped vortex
chamber design on the stability of
meso-scale liquid combustion
Principal: Lt. Kol. Nurulhasnan Abd Majid
Members: , Ir. Dr. Mohd Rosdzimin Abdul Rahman,
Dr. Leong Kin Yuen, Dr. Mohd Rashdan Saad
2016 GPJP (UPNM)
RM38,000 In Progress
5
Effects of Explosion on Steel Structures with Fire Protective
Systems
Principal: Suriyadi bin Sojipto
Members: Mohd Azani Yahya, Dr. Mohd Rashdan Saad, Dr. Azam Che Idris,
Ir. Dr. Mohd Rosdzimin Abdul
2016 GPJP (UPNM)
RM34,000 In Progress
6
Aeroelastic Investigation of
Carbon nanotube Reinforced Kevlar for Inflatable Wing
Principal: Noor Azman bin Dollah
Members: Dr. Azam Che Idris, Dr. Mohd Rashdan
2015 GPJP (UPNM)
RM20,000 In Progress
11
No Title List of Rresearchers Principal Members
Grant Year
Source Amount
Status Completed In Progress
Saad, Ir. Dr. Mohd Rosdzimin Abdul Rahman
7
Micro-Vane in Controlling Cavity Flow Separation in
Subsonic Flow
Principal: Lt. Kol. Abdul Latif Taha (B)
Members: Dr. Mohd Rashdan Saad, Dr. Azam
Che Idris, Ir. Dr. Mohd Rosdzimin Abdul Rahman
2015 GPJP (UPNM)
RM35,000 Completed
8
Micro-Vortex Generator for Flow Separation Control in Hypersonic Flow
Principal: Dr. Mohd Rashdan Saad
Members: P.M. Dr. Kamarul Arifin Ahmad
(UPM), En. Mohamad Abu Ubaidah Amir Abu Zarim,
Prof. Dr. Risby Mohd Sohaimi, Dr. Azam Che
Idris
2015 RACE (KPT)
RM46,000 Completed
9
Hybrid Micro-Vortex Generator to
Control Boundary-Layer Separation in
Subsonic Flow
Principal: Dr. Mohd Rashdan Saad
Members: Dr. Zaid Omar (UTM), Prof. Dr. Risby
Mohd Sohaimi, Suriyadi Sojipto, Dr. Azam Che Idris,
Dr. Muhammad Akram Khan
2014 RAGS (KPT)
RM74,000 Completed
12
2.2 Publications 2.2.1 Invited/Keynote Papers/Presentation
(Please list in chronological order and state: authors, year, title, publisher/journal/conference, volume and number of pages (Please bold your name)
No Authors, year, title, publisher/journal/conference, volume and number of pages (Please bold your name)
Level International National University
1
The Potential of Hybrid Micro-Vortex Generators to Control Flow Separation of NACA 4415 Airfoil in Subsonic Flow. The International Conference on Engineering and Technology (INTCET 2017), Putrajaya November 2017 (Invited Speaker)
International
2.2.2 Book/Chapter in Book:
(Please list in chronological order and state: authors, year, title, publisher/journal/conference, volume and number of pages (Please bold your name)
No Authors, year, title, publisher/journal/conference, volume and number of pages (Please bold your name)
Level International National University
1
K. Kontis, E. Erdem, N. Gongora-Orozco, R. Mariani, A. Che Idris, H. Zare-Behtash, D. Bradford, M. Quinn, M.R. Saad, 28th International Symposium on Shock Waves Volume 1, 2012, Springer-Verlag Berlin Heidelberg, ISBN 978-3-642-25684-4
International
2
K. Kontis, E. Erdem, N. Gongora-Orozco, R. Mariani, A. Che Idris, H. Zare-Behtash, D. Bradford, M. Quinn, M.R. Saad, 28th International Symposium on Shock Waves Volume 2, 2012, Springer-Verlag Berlin Heidelberg, ISBN 978-3-642-25684-5
International
13
2.2.3 Journal Article
(Please list in chronological order and state: authors, year, title, publisher/journal/conference, volume and number of pages (Please bold your name)
No Authors, year, title, publisher/journal/conference, volume and number of pages (Please bold your name)
Level International National University
1 A. Che Idris, M.R. Saad, K.H. Lo and K. Kontis. Background-Oriented Schlieren (BOS) for Scramjet Inlet-Isolator Investigation. IOP Conference Series: Materials Science and Engineering 370(1) 012003 (2018)
International
2 M.Z.M. Aliashak, M.R. Saad, A.T. Latif, A. Che Idris and M.R.A. Rahman. Microvane in controlling noise in open cavity flow. IOP Conference Series: Materials Science and Engineering 370(1), 012016 (2018)
International
3
M.T. Jumahadi, M.R. Saad, A. Che Idris, S. Sujipto and M.R.A. Rahman. The potential of hybrid micro-vortex generators to control flow separation of NACA 4415 airfoil in subsonic flow. AIP Conference Proceedings 1930, 020030 (2018)
International
4 M.R.A. Rahman, M.R. Saad, A. Che Idris and H.M. Faizal. Heat Transfer of the TiO2/water nanofluid in an annulus of the finite rotating cylinders. International Journal of Heat and Technology (36) (2018) 353-358.
International
5
M.Z.A. Abd Latif, M.A. Ahmad, R.E.M. Nasir, W. Wisnoe and M.R. Saad. An Analysis An analysis on 45˚ sweep tail angle for blended wing body aircraft to the aerodynamics coefficients by wind tunnel experiment. IOP Conf. Series: Materials Science and Engineering 270 (2017) 012001.
International
6
R.E.M. Nasir, A.M. Ahmad, Z.A.A. Latif, M.R. Saad and W. Kuntjoro. Experimental result analysis for scaled model of UiTM tailless blended wing-body (BWB) Baseline 7 unmanned aerial vehicle (UAV). IOP Conf. Series: Materials Science and Engineering 270 (2017) 012005.
International
7
M.A. Rahman, M.Y. Harmin, M.F.S. Koslan, M.R. Saad, F.I. Romli and M.T. Ahmad. Size-scale effects of inboard Store-Y on X-plane model: A parametric study using CFD. IOP Conf. Series: Materials Science and Engineering 270 (2017) 012006.
International
14
8 S.S. Baljit, M.R. Saad, A.Z. Nasib, A. Sani, M.R.A Rahman and A. Che Idris. Suction and Blowing Flow Control on Airfoil for Drag Reduction in Subsonic Flow. Journal of Physics: Conference Series 914(1) (2017), 012009.
International
9
A. Che Idris, N.A. Dollah, M.F. Baharun, M.R. Saad, S. Sujipto and M.R.A. Rahman. Design Optimisation of Solar Powered Near-Space Vehicle for Defense, Security and Disaster Management Applications. Defense S&T Technical Bulletin 10(3)(2017), 169-186.
International
10
A. Che Idris, N.A. Dollah, M.R. Saad, S. Sojipto and M.R.A. Rahman. New Design Algorithm and Reliability Testing of Solar Powered Near-Space Flight Vehicle for Defense and Security. J. Fundam. Appl. Sci., 9(3S) (2017), 433-456.
International
11 N.A. Dollah, M.R. Saad and A. Che Idris. Inflatable Structure for Aerospace Application: Historical Perspective and Future Outlook. J. Fundam. Appl. Sci., 9(3S) (2017) 317-334.
International
12 M.R.A. Rahman, K.Y. Leong, A. Che Idris, M.R. Saad and M. Anwar. Numerical Analysis of the Forced Convective Heat Transfer on Al2O3-Cu/Water Hybrid Nanofluid. Heat and Mass Transfer. 52 (2017) (12).
International
13 M.R.A. Rahman, K.Y. Leong, A.Che Idris, M.R. Saad. Thermal Fluid Dynamics of Al2O3–Cu/Water Hybrid Nanofluid in Inclined Lid Driven Cavity. Journal of Nanofluids 6 (1) (2017), 149-154.
International
14 M.R.A Rahman, K.Y. Leong, A. Che Idris, M.R. Saad and M. Anwar. “Nanofluid heat transfer between concentric independently rotating tubes with axial flow”, IOP Conf. Series: Journal of Physics, 822 (1) (2017) 012034
International
15 A. Ahmad, M.R. Saad, A. Che Idris, M.R.A Rahman and S. Sujipto. Aerodynamic Performances of Cruise Missile Flying Above Local Terrain. IOP Conf. Series: Materials Science and Engineering 152 (2016) 012006. (Scopus)
International
16
M.A.U. Amir, A. Maimun, S. Mat and M.R. Saad. Computational Analysis of Aerodynamic Characteristics for Wind in Ground Effect Craft in Lateral Stability. IOP Conf. Series: Materials Science and Engineering 152 (2016) 012003. (Scopus)
International
17 B.S. Sidhu, M.R. Saad, K.Z.K. Ahmad and A. Che Idris. Riblets for Airfoil Drag Reduction in Subsonic Flow. ARPN Journal of Engineering and Applied Sciences 11 (12), 2016. (Scopus)
International
15
18 A. Che Idris, M.R. Saad, H. Zare-Behtash and K. Kontis. Luminescent Measurement Systems for the Investigation of a Scramjet Inlet-Isolator. Sensors 14 (2014), 6606-6632.
International
19 M.R. Saad, A. Che Idris, and K. Kontis. Flow Diagnostics in Shock-Wave Boundary Layer Interaction Experiments in Hypersonic Flow. Applied Mechanics and Materials 660 (2014), 669-673.
International
20 M.R. Saad, H. Zare-Behtash, A. Che Idris, and K. Kontis. Micro-Ramps for Hypersonic Flow Control. Micromachines 3 (2012), 364-378. International
2.2.4 Proceedings Articles:
(Please list in chronological order and state: authors, year, title, publisher/journal/conference, volume and number of pages (Please bold your name)
No Authors, year, title, publisher/journal/conference, volume and number of pages (Please bold your name)
Level International National University
1
M.A.U. Amir, A. Maimun, S. Mat and M.R. Saad. Wing in Ground Effect Craft: A Review of the State of Current Stability Knowledge. International Conference on Ocean, Mechanical and Aerospace for Scientists and Engineers (OMAse 2016), Terengganu, Malaysia, 7-8 November 2016.
International
2
M.R. Saad, A. Che Idris, H. Zare-Behtash, K. Kontis. Flow Visualization of Shock Wave/Boundary Layer Interaction Controlled by Micro-Ramp at Mach 5. In 6th European Conference for Aeronautics and Space Sciences (EUCASS), Krakow, Poland, 29 June-3 July 2015.
International
3 A. Che Idris, M.R. Saad, K. Kontis. Micro-Vortex Generator for Scramjet Inlet Applications. In 6th European Conference for Aeronautics and Space Sciences (EUCASS), Krakow, Poland, 29 June-3 July 2015.
International
4 M.R. Saad, A. Che Idris, K.H. Lo and K. Kontis. Micro-Ramps Flow Characteristics at Mach 1.9 & 5. In Proceedings of the 29th International Symposium on Shock Waves, Madison, WI, USA, 14-19 July 2013, 2013.
International
5
A. Che Idris, M.R. Saad, H. Zare-Behtash, and K. Kontis. Experimental and Computational Study of Flow Interactions in a Generic Scramjet Inlet-isolator. In Proceedings of the 29th International Symposium on Shock Waves, Madison, WI, USA, 14-19 July 2013, 2013.
International
16
6
M.R. Saad, A. Che Idris, and K. Kontis. Experimental Studies on Micro-Vortex Generators in Hypersonic Flow. In Proceedings of the 28th Congress of the International Council of the Aeronautical Sciences, Brisbane Australia, 23-28 September 2012. ICAS 2012-3.5.2. 2012.
International
7
A. Che Idris, M.R. Saad, H. Zare-Behtash and K. Kontis. Performance Analysis of a Scramjet Inlet Isolator using Experimental & Numerical Methods. In Proceedings of the 28th Congress of the International Council of the Aeronautical Sciences, Brisbane Australia, 23-28 September 2012. ICAS 2012-P4.12. 2012.
International
8
M.R. Saad, A. Che Idris, H. Zare-Behtash, and K. Kontis. Micro-Ramps in Mach 5 Hypersonic Flow. In Proceedings of the 50th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Nashville, TN, USA, 9-12 January 2012. AIAA 2012-0676, 2012.
International
9 M.R. Saad, E. Erdem, L. Yang, and K. Kontis. Experimental Studies on Micro-Ramps in Mach 5. In Proceedings of the 28th International Symposium on Shock Waves, Manchester, UK, 17-22 July 2011, 2011.
International
3.0 ACADEMIC RECOGNITION AND LEADERSHIP, CONSULTANCY, SERVICE TO THE UNIVERSITY AND SERVICE TO THE COMMUNITY
(a) Academic Recognition and Leadership
Academic recognition and leadership such as Academic Award, Academic Assessor/External Examiner/Ph.D. Thesis Examiner, Master’s Thesis Examiner/Promotion Assessor (External), Internal Thesis Examiner, Visiting Professor/Fellowship, Invited Speaker, Editorial Board and other academic recognition. (Please list in chronological order and state: Academic Recognition (e.g. award name, invited speakers etc.), year, level and awarding body/ name of institution)
No Academic Recognition
Year Level Awarding Body / Name of Institution
1
Anugerah Perkhidmatan Cemerlang (APC) UPNM 2018
2018 University Universiti Pertahahnan Nasional Malaysia (UPNM)
2 Member of Local Organising Committee
2018 International 32nd International Symposium on Shock
Waves 2019 (ISSW32)
17
3 Reviewer 2018 International AEROTECH VII Conference 2018
4 Member of Advisory Committee
2018 International International Conference on Aviation Technology and Management 2018
(ICATEM 2018)
5 Reviewer 2018 International International Conference on Aviation Technology and Management 2018
(ICATEM 2018)
6 Speaker 2017 National Thesis Writing Workshop for Research
Project Course, Masters of Process Safety, Universiti Putra Malaysia
7 Reviewer 2017 International Journal of Mechanical Engineering (JMechE) in conjunction with ReCAR 2017
8 Reviewer 2017 International AEROS Conference 2017, Putrajaya
9 Reviewer 2017 International The International Conference on
Engineering and Technology (INTCET 2017), Putrajaya
10 Reviewer 2017 International Jurnal Kejuruteraan (UKM)
11 Visiting Scholar 2017 International The University of Texas at Arlington, USA
12 Visiting Researcher 2016 International University of Glasgow, United Kingdom
13 Speaker 2016 National Journal Writing Workshop for Research
Project Course, Masters of Process Safety, Universiti Putra Malaysia
14 Reviewer 2016 International Journal of Aerospace Science and Technology
15 Associate ASEAN Engineer (AAE) 2016 -now International ASEAN Engineering Register
16 Member (MRAeS) 2016 -now International Royal Aeronautical Society (RAeS) United
Kingdom
17 Member (MIET) 2016 - now International The Institution of Engineering and Technology (IET) United Kingdom
18
18 Member (Mbr. AIAA)
2016 – now International The American Institute of Aeronautics and
Astronautics (AIAA)
19 Graduate Member (Grad I.E.M.)
2014 – now National The Institution of Engineers, Malaysia (IEM)
20 Conference Organizing Committee
2011 International 28th International Symposium on Shock Waves (ISSW 29), Manchester UK.
21 Graduate Engineer (Grad.Eng.) 2009 National Board of Engineers Malaysia (BEM)
(b) Consultancy - Consultancy work that benefited to the University.
(Please list in chronological order and state: title, year, sponsor, value, main researchers and duration of consultancy)
No. Title Year Sponsor Value Duration
1 Ruggedization of Wing-in-Ground Craft Airfish 8 for Defence & Security Application
2017 A.S. Aero Services
Sdn. Bhd. -
2017 - now
2
Development via 3D Printing Technology of Shroud and Duct Cooling System for King Air Beechcraft B200T Avionics Mission System
2017 AIROD
Sdn. Bhd - 2017
(c) Service to the University
Service to the university such as Vice Chancellor/Deputy Vice Chancellor/Dean/Director, Deputy Dean/Deputy Director/Unit Coordinator/Hostel Warden, Programme Chairperson/ Assistant Warden/Fellow. Representing University in Sports and Other Non-Academic Activities. Professional/Academic Association (Committee Member). (Please list in chronological order and state: position/membership, committee and duration)
No Position/ Membership
Committee Duration
1 Ahli Jawatankuasa Penilaian Sebut Harga Fakulti Kejuruteraan UPNM/FKJ/SH04/08/2017
2017
19
2 Ahli Jawatankuasa Rundingan Harga Universiti (Rundingan Terus Bagi Kerja Pembaikan Lif Jenama EITA di Asrama Tuah UPNM)
2017
3 Penilai Program Kolokium Siswazah anjuran Pusat Pengajian Siswazah (PPS)
2017
4 Urusetia Karnival Pendidikan Tinggi Negara, Kota Bharu (11-12 Feb ’17), Bahagian Pengurusan Akademik
2017
5 Research Fellow Pusat Penyelidikan & Teknologi Pertahanan (CODRAT) 2017
6 Ahli Jawatankuasa Akreditasi Makmal FESEM, Fakulti Kejuruteraan
2017
7 Ahli Jawatankuasa Rundingan Harga Bagi Perolehan Secara Rundingan Terus (Senggaraan Lif)
2016
8 Ahli Jawatankuasa Penyediaan Dokumen SAR, Jabatan Kejuruteraan Mekanikal
2016
9 Yang Di Pertua (YDP)
Kelab Kebajikan & Sukan Fakulti Kejuruteraan (KESUTERA) 2015 -
kini
10 Penceramah Karnival Pendidikan Kerjaya Program Matrikulasi Teknikal Johor (KPM)
2015
11 Penilai Defense, Security and Sustainability Colloquium & Exhibition (DSS 2015) anjuran PPPI
2015
12 Ahli Jawatankuasa Rundingan Harga Bagi Perolehan Secara Rundingan Terus (Lestari & Tuah) 2015
13 Fasilitator Academic Special Program Fakulti Kejuruteraan, Kem Kongkoi, Jelebu
2015
14 Ahli Jawatankuasa E-Pembelajaran Fakulti Kejuruteraan 2015
15 Ketua Panel Aeronautikal, Jabatan Kejuruteraan Mekanikal, Fakulti Kejuruteraan
2014 - kini
16 Penasihat Akademik
Pelajar Sarjana Muda Kejuruteraan Mekanikal Kemasukan 2014/2015
2014 - kini
20
17 Ahli Jawatankuasa Program Sarjana Muda Teknologi Kejuruteraan (Pertahanan), Fakulti Kejuruteraan
2014 - 2015
18 Ahli Jawatankuasa Program Sarjana Muda Kejuruteraan Mekanikal (Mod Separuh Masa)
2014 - 2015
19 Pengerusi Jawatankuasa Penilaian Harga Sebut Harga UPNM(PB)03.02/01(2014)(15) 2014
20 Ahli Jawatankuasa Penilaian Spesifikasi dan Teknikal Tender UPNM UPNM(PB)03.03/01(2014)(6)
2014
21 Penyelaras Master Programme Aeronautic, Jabatan Kejuruteraan Mekanikal
2014 - 2015
22 Ketua Makmal Wind Tunnel, Fakulti Kejuruteraan 2014 -
kini
23 Ketua Makmal Computer Aided Engineering (CAE), Fakulti Kejuruteraan
2014 - 2016
24 Ahli Jawatankuasa Penilaian Sebut Harga Fakulti Kejuruteraan 2014 - 2016
25 Auditor Aset Makmal, Fakulti Kejuruteraan 2014
26 Ahli Jawatankuasa Penilaian Harga Sebut Harga UPNM(PB)03.02/01(2013)(36)
2013
27 Ahli Jawatankuasa Penilaian Harga Sebut Harga UPNM(PB)03.02/01(2013)(34) 2013
21
(d) Service to the community
(Please list in chronological order and state: level of involvement, activity, organiser, venue, date/ year/ duration)
No Level of
involvement Activity Organiser Venue Date/Year/Duration
1 Chairman JK
Pembangunan Mahasiswa
Pertubuhan IKRAM Bandar Tun Razak, KL
Bandar Tun Razak, KL
2016-2018
2018-2020
2 Head of Section
Unit Tarbiah JK Seberang
Laut
Pertubuhan IKRAM
Malaysia
Seri Kembangan,
Selangor 2018-2020
3 Chairman
Surau Al-Jalil, PPA1M Bukit Jalil, Kuala
Lumpur
PPA1M Bukit Jalil, KL
Kuala Lumpur
2018-2020
4 Participant MQA Run
2017
Malaysian Qualifications Agency (MQA)
Mercu MQA, Cyberjaya 11th November 2017
5 Fasilitator & Pensyarah Pengiring
Medal of Honour:
Murabbi in the Making 2017
Biro Eksekutif Surau &
Tarbiah, KTDI, PPUKM
Hulu Langat, Selangor
17-18th March 2017
6 Participant Love Myself Run 2017
Mothers Against
Pornography (MAP)
Padang Merbok, KL
22nd October 2017
7 Participant IEM
Engineer’s Run 2017
The Institution of Engineers
Malaysia (IEM)
Taman Botani, KL
20th August 2017
8 Speaker
Program Motivasi Pelajar &
Pengenalan kepada
Aeroangkasa
MRSM Parit, Perak
MRSM Parit, Perak
19th August 2015
22
9 Speaker & Forum Panelist
Sharing of Experience on PhD Journey
Pusat Pembangunan
Akademik (PPA) UPNM
UPNM 28th February 2014
10 Speaker
Career in Academia &
Higher Learning
Education
MRSM Tun Abdul Razak,
Pekan, Pahang
Pekan, Pahang 9th August 2014
I declare that all the information in this form is true and correct. The University has the right to withdraw or reject the application if any information in this form found to be untrue.
Signature : Name : Dr. Mohd Rashdan bin Saad Faculty/Department : Department of Mechanical Engineering Faculty of Engineering Date : 23th October 2018