curriculum vitae eko apriansyah
TRANSCRIPT
D4 Teknik Pengelasan PPNS - ITS Page 1 of 5
Resume
Curriculum Vitae
Personal Data
Name
Eko Apriansyah
Place, Date of birth Gresik, April 19th,1991
Gender Male
Age 24 years old
Hight/Weight 168 / 52 kg
Religion Islam
Nationality Indonesian
Marriage Status Single
Phone +62 8138 2392 707 (Primary)
+62 8385 7925 773
Email [email protected] (Primary)
Academic Background
Diploma 4 Program (D4) Welding Engineering Majority at Politeknik Perkapalan Negeri Surabaya – Institut Teknlogi Sepuluh Nopember (ITS) with cumulative GPA 3.30 scale of 4.00
Technical High School of Semen Gresik
Junior High School at SMP Negeri 2 Manyar, Gresik
Elementary School at MINU Trate Putra, Gresik
2009 – 2013
2006 – 2009
2003 – 2006
1997 – 2003
Eko Apriansyah
Jl. Samarinda 1 no.30 GKB Sukomulyo,
Gresik 61151
Phone : +62 813 8239 2707 (Primary)
Email : [email protected]
Page 2 | +62 8138 2392 707
Resume: Eko Apriansyah
Training and Qualification
Training and Qualification Place Years
Radiography Interpreter Level II based on SNT-TC 1A (Cert No.
40800619)
Welding Inspector Certification (BNSP) (Jip. 024.0000354.2014)
Welding Inspector training and certification (Cert No.
19/PL19/WI-XXIX/12)
Welder BSNP 3G for plate
Surabaya
2014
Jakarta
2014
Surabaya
2012
Gresik
2009
On the job training / Internships
On The Job Training / Internships Place Years
On The Job Training at PT. Petro Jordan Abadi as Welding
Inspector (Project Plant)
Gresik
2012
Description
- Review Engineering Calculation for storage tank.
- Assist Construction manager for Supervision and inspect
material, fabrication and erection at H2SO4 tank, H2PO4
tank, H2O tank and Diesel tank Base on CODE API 650.
- Review contractor inspection report.
- Create inspection report for construction manager.
On The Job Training at PT. Petrokimia as Welding Inspector
Gresik
2012
Description
- Control and Supervision Welding Jobs at Maintenance dept
plant 2.
- Create Welding and production report
- Learn and presentation about material and their weldability
for screw conveyor.
Interenships at Pusat Pengembangan dan Pemberdayaan
Pendidik dan Tenaga Kependidikan/Vocational Education
Development Center (PPPPTK/VEDC ).
Malang
2008 Description
- Assist Welding jobs.
- Create Welding Report.
- Assist and Prepare Welder training and Qualification
Page 3 | [email protected]
Resume: Eko Apriansyah
Experiences
Work Experiences Location
Years/
Periode
PT Asuka Engineering Indonesia as Site Coordinator for TAM 15 on Chandra Asri Petrochemical
Cilegon
2015
(2 month)
Project on
going
Description
- Planning the maintenance project effectively, by ensuring that the project requirements, specification, design drawings, health and safety proposals are all read, understood and agreed.
- Supervise and manage all site based operatives, overseeing all aspects of their work, to include; carrying out safety inductions; tool box talks; controlling quality of work; ensuring method statement and order fulfilment; cleanliness & tidiness; the use of plant and tools, waste reduction.
- Produce TQ and resolve these with a client, ensuring directives are undertaken and also maintaining records of these items, including site instruction received.
- Check that materials used, including those used by subcontractors, are comply with technical and quality specifications.
- Ensure that all works carried out are undertaken within current codes
- Create Root Cause Analisys for corrective and preventive actions.
PT Asuka Engineering Indonesia as Engineer for TAM 15
on Chandra Asri Petrochemical
Cilegon
2015
(a month)
Project On
Going
Description - Review and check line drawing for construction and
comply with material supply from client. - Estimate material take off for construction as per
requirement at site. - Identification material specification and consumable for
construction. - Ensure project specification is comply and approve with
client specification. - Provide manufacturing data report form.
Page 3 | [email protected]
PT. Supra Surya Indonesia as QA & QC Structural,
Mechanical static and rotating for Tembang Gold Project Sumatra Copper and Gold, Dwinad Nusa Sejahtera
Lubuk Linggau
– Sumatera Selatan
2015 ( 7 Month)
(Project
Finished)
Description - Material receiving inspection as per client spec. - Visual Welding Inspection for structural and storage tank
as per Client spec and Australian Standard. - Create and Supervision all installation work and report
as per client spec. - Compiled support document for Quality inspection. - Support Superintendent for Quality concern. - Prepared requisition for inspection document with client. - Inspect all Equipment structural, Mechanical, and
Storage tank conform with vendor procedure. - Supervision all activity for Alignment, Bolt Tightening,
and installation Mechanical equipment work. - Prepare punch list for closing Worked area. - Prepared Quality Record ( Dimensional Inspection
Check, Alignment Inspection Report, Elevation Inspection Report )
- Ensure All welding work conform with WPS. - Create Root Cause Analisys for corrective and
preventive actions. - Support Site manager for update work progress.
PT. Barata Indonesia as Surveillance inspector for Matindok Gas Development Project Rekayasa Industri, Pertamina EP
Dongin –
Sulawesi tengah
2014 – 2015 (2 Month)
(Project
Finished)
Description - Material receiving inspection - Visual Welding for storage tank as per API 650 last ed. - Prepare Welding and NDE Maps - Prepare Request for inspection - Support QC Rekind for Quality Concern - Prepared NDT Requisitions for Radiography test,
Magnetic Particle, and Penetrant Test. - Compile support Document QC for inspection. - Create Welder Rejection Rate.
Page 3 | [email protected]
PT. Cahaya Hidup Primakarya as Welding Inspector for
Senoro Gas Development Project Tripata – Samsung
Consortium, J.O.B Pertamina – Medco E.P.
Tomori –
Sulawesi
Tengah
2014 – 2015
(3 Month) (Project
Finished)
Description - Material receiving inspection as per API 650 and client
spec. - Welder Performance Qualification Test - Visual Welding inspection. - Compiled document QC. - Create and Supervision welding traceability report. - Create and Prepare Document for Support Fabrication
(e.i. Work Instruction, QC Package, and etc). - Supervision welding parameters as per WPS. - Prepare Manufacturer’s Data Report. - Prepared welder rejection rate - Prepared request for inspection
PT. Gearindo Prakarsa as Project Engineer for PHE
ONWJ project.
Bekasi
2013 – 2014 (14 Month)
(Project Finished)
Description - Calculate Cost Estimation Work Execution. - Prepare Manufacture Data Report. - Create and Supervision progress Daily Report
Fabrication. - Create Cutting Plan for fabrication piping and structure. - Create and Supervision Welding Traceability report. - Create and Prepare Document for Support Fabrication
(e.i. Work Instruction, QC Package, and etc) - Assist Supervisor and Planning Engineer to supervision
fabrication. - Create Quality Plan and Onshore / Offshore Manual
Procedure as per Client Contract. - Create Root Cause Analisys for corrective and
preventive actions. - Create Welding Rejected Rate as per Welder
Progression
- Assist QC inspector works to create Request For Inspection.
Page 5 | +62 8138 2392 707
Resume: Eko Apriansyah
PT. Swadaya Cipta as QC Inspector(Sub Cont).
Tuban
2013
(4 Month) (Project
Finished)
Description
- Supervision and inspection welding jobs at PT. Semen
Indonesia tuban’s base on Conveyor Trash Project
plant 4.
- Create and doing Material, Dimention Check and
Inspection report.
- Ensure Welding jobs as per WPS
- Create Welding Progress Report, NDT report, dan
Painting Inspection.
PT. Aneka Jasa Ghrdika (PT. AJG) as QC Inspector.
Gresik
2013 (1 Month)
(Project Finished)
Description - Supervision welding jobs at PT. Petrokimia Gresik on
manufacturing H2PO4 tank Project
- Create and doing Material, Dimention Check and
Inspection report.
- Ensure Welding jobs as per WPS
- Create Welding Progress and NDT Report
- Create and Prepare Manufacturing Data Report
PT. Satyamitra Surya Perkasa (SSP) as QC Inspector (sub Cont.)
Gresik
2011 – 2012 (10 Month) (Project Finished)
Description
- Supervision and reported pipe weldng at PT Media
Karya Sentosa on LPG Project Plant II.
- Create welding progression report
- Create and doing Material, Dimention Check and
Inspection report.
- Ensure Welding jobs as per WPS
- Create and Prepare Document for Support Fabrication
(e.i. Work Instruction, QC Package, and etc)
Page 6 | [email protected]
Resume: Eko Apriansyah
Organization Experiences
Organization Location Tahun
Committee of Welding Procedure Specification Seminar
Committee of Aplikasi NDT dalam Inspeksi
Pengelasan Seminar
Originator of Forum Komunikasi dan Informasi
Mahasiswa PPNS-ITS
Committee of charities PRAY FOR MERAPI
Committee of Open House Campus Expo PPNS-ITS
Committee of Guest lectures Welding Technology of
Overlay Cladding and Welding Experiance
Committee of National Polytechnic English Olimpic I
2010
2010
2010
PPNS 2010
2011
2012
2013
Computer Skills
MS Office Package (i.e. Ms Word, Ms Excel, Ms Power Point, Ms, Project)
Auto CAD 2D and 3D
Patran Nastran
Adobe Software (i.e. Photoshop, reader, etc)
Corel Draw
OS Knowledge (windows, iOS, Android)