curriculum vitae a. personal detailsstructural dynamics, earthquake engineering, beam-column joint...
TRANSCRIPT
CURRICULUM VITAE
A. PERSONAL DETAILS
Name : Dr. Hjh Nor Hayati Binti Abdul
Hamid Current Position : Associate Professor Identity Card No. : 661105-10-5182
Office Address : Institute for Infrastructure Engineering and Sustainable
Management (IIESM), Level 3, Block 1, Engineering Complex, Universiti Teknologi MARA, 40450, Shah Alam,
Selangor Home Address : No 29, Jalan Vanadium Satu,
7/34A, Seksyen 7, 40 000 Shah Alam,
Selangor. Contact Number : 017- 315 9303 (Mobile) Office Number : 03 5543 6169
Fax No : 03 5543 5275 Nationality : Malaysian
Date of Birth : 05-11-1966 Race : Malay Religion : Muslim
Sex : Female Marital Status : Married
Language Proficiency : Bahasa Malaysia and English Email address : [email protected]
B. TITLE OF POSTGRADUATE THESES
(I) Hamid, N.H.A, (1992),”Line of Balance Programme – A repetitive work”, Master Thesis, Department of Civil Engineering, University of NewCastle Upon Tyne, United Kingdom.
(II) Hamid, N.H.A., (2006), “Seismic Damage Avoidance Design of Warehouse
Buildings Constructed Using Precast Hollow Core Panels”, PhD Thesis submitted in partial fulfillment of the requirement for Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand. Available online:
http://ir.canterbury.ac.nz/handle/10092/1153.
C. MAIN CURRENT RESEARCH AREAS Structural Dynamics, Earthquake Engineering, Beam-column joint with corbel, Tunnel
Form Buildings, Precast Hollow Core Wall and Slab, Damage Avoidance Design of Rocking
Wall, Precast Shear-key Wall Panel, Insulated Sandwich Panel, Wall-slab connection for
Industrialized Building System (IBS), Moment-resisting Frame using Eurocode 8 and Base
Isolation System (High Damping Rubber Bearing).
D. ACADEMIC QUALIFICATIONS
Qualification Year Institution
1.
PhD in Civil Engineering (Earthquake Engineering)
2006
University of Canterbury, Christchurch, New
Zealand.
2.
MSc in Civil Engineering (Construction Management
and Structural Engineering)
1991
University of NewCastle Upon Tyne, NewCastle,
United Kingdom
3.
BSc in Civil Engineering (Hons)
1989
University of Pittsburgh, Pennsylvania, United States of America
4.
Diploma in Engineering
Science
1986
Broome Community
College, Binghamton, New York,
United States of America.
5.
South Australian Matriculation
1985
Sri Inai College, Ipoh, Perak
Malaysia.
E. MEMBERSHIP OF PROFESSIONAL SOCIETIES
No
MEMBERSHIP
YEAR
INSTITUTION
1.
2.
3.
4.
5.
Lifetime membership
Lifetime
membership Members
Graduate
Members Associate
Members
1987
1988
1996
1994
1996
Golden Key National Honor Society, University of Pittsburgh, United State of America
Chi Epsilon, National Civil Engineering
Honor Society, University of Pittsburgh, U.S.A
Jurutera Malaysia
Institut Jurutera Malaysia
Persatuan Konkrit Malaysia
6.
7.
Members
Graduate
Members
2002
2003
New Zealand Society for Earthquake Engineering
Structural Engineering Society of New Zealand
Cement & Concrete Association of New Zealand Institution of Professional Engineers
New Zealand (INPENZ)
F. POSITION HELD PREVIOUSLY
No Position Year Organization/Employer
1. Deputy Director II 1 Mac 2018 Institute for Infrastructure
of Engineering and Sustainable Management
(IIESM), UiTM, Shah Alam, Selangor.
2.
Principle Researcher
27 Mac
2016
Institute for Infrastructure of Engineering and
Sustainable Management (IIESM), UiTM, Shah Alam,
Selangor.
3.
Associate Professor
1 Jan 2011
Fakulti Kejuruteraan Awam, UiTM, Shah Alam, Selangor
4.
Koordinator Pasca Siswazah
2 Feb 2008 Fakulti Kejuruteraan Awam, UiTM Shah Alam
5. Senior Lecturer 17 Nov 2007
Fakulti Kejuruteraan Awam,
UiTM, Shah Alam
6. Pensyarah (DM 45) 1 Nov 2002 UiTM, Shah Alam
7. Pensyarah (DM 2) 1 Okt 1999 UiTM, Shah Alam
8. Pensyarah (DT3) 17 Dis 1991
ITM, Shah Alam
9. Pensyarah (Kontrak)
12 Nov 1991
South Australian
Matriculation, PPP, UiTM, Shah Alam
10. Pensyarah 13 Feb 1990
Federal Institute of
Technology, Petaling Jaya, Selangor
11. Pensyarah 1989-1990
Stamford College, Petaling Jaya, Selangor
G. PUBLICATION OF BOOKS/MONOGRAPHS/CHAPTER IN BOOKS
1. Hamid, N.H., (2008), SEISMIC DAMAGE AVOIDANCE 'Seismic Damage Avoidance of
Warehouse Buildings Constructed Using Precast Hollow Core Panels, ISBN: 978-3-639-02267-4, VDM Verlag Dr. Muller, Saarbrucken, Germany.
2. Hamid, N.H., (2009), Seismic Performance and Design Criteria of Precast Wall
Panels, UPENA, ISBN:978-967-305-314-8, UiTM, Shah Alam, Selangor.
3. Hamzah, S.H., Hamid, N.H., Marwi, M.S, (2008), Understanding Reinforced Concrete
Through Experiment 2nd Edition, University Publication Centre (UPENA), UiTM, ISBN 978-967-305-137-3, UiTM, Shah Alam, Selangor.
4. Hamid, N.H., (2006), Student Project and Research Guidelines, Faculty of Civil Engineering, UiTM, ISBN No: 983-9414-76-3, December 2006, Shah Alam, Selangor.
5. Fook, S.K, Hamid, N.H. (2006), Structural Steelwork Design BS 5950:2000,
Monograph for Design Project, Faculty of Civil Engineering, UiTM, Shah Alam, Selangor.
6. Hamid, N.H., Hamid, T.A., Yahya, Z.,(2011), Final Year Project Guidelines, Penerbit UiTM Press, ISBN No: 978-967-363-225-1, Shah Alam, Selangor, Malaysia.
7. Che Maznah Mat Isa, Wardah Tahir, Nor Hayati Abdul Hamid, Hamidah Mohd Saman,
Juraidah Ahmad, Kamaruzzaman Mohamed, Hamidon Ahmad, “Obe Assessment
Guideline For Civil Engineering Programme”, Faculty of Civil Engineering, Universiti Teknologi MARA, 40450 Shah Alam, Selangor, Malaysia.
8. N.H. Hamid and S.A. Anuar, (2014), "Modeling of a Tunnel Form Building Using
Ruaumoko 2D program, Advanced Engineering and Technology, ISBN No: 978-1-
138-02636-0, CRC Press, Taylor and Francis Group, London, United Kingdom.
9. A.G. Kay Dora and N.H. Hamid, (2014), “Modeling hysteresis loops of corner beam-column joint using Ruaumoko program" Advanced Engineering and Technology, ISBN No: 978-1-138-02636-0, CRC Press, Taylor and Francis Group, London, United
Kingdom.
10.N.H. Hamid, M.E. Mohamad and M.A. Zainuddin, (2015), “Repair and Retrofitting Bridge Pier Using CFRP and Tested Under In-plane Lateral Cyclic Loading”, INCIEC 2015, ISBN No:978-981-10-0154-3, Springer, Singapore.
11.N.D. Hadi, A.G. Kay Dora and N.H. Hamid, (2015), “Comparison of Seismic
Performance Between Interior Beam-column Joint Designed Using BS8110 and Eurocode 8” , INCIEC 2015, ISBN No: 978-981-10-0154-3, Springer, Singapore.
12.S.A. Anudai, N.H. Hamid and M.H. Hashim, (2015), “Comparative Study of Seismic Behavior of Tunnel Form Building Between Experiment and Modeling”, INCIEC2015,
ISBN No: 978-981-10-0154-3, Springer, Singapore.
13.N.H. Hamid, M.S. Jaafar and N.S.U Othman, (2015), “Analysis of Multi-Column Pier of Bridge Using STAAD.Pro Under Static and Dynamic Loading”, INCIEC2015, ISBN
No: 978-981-0154-3, Springer, Singapore.
H. PUBLICATION OF JOURNALS
1. Nuruddin, M.F, Hamid, N.H., and Bahari, S., (1996),“Analysis of Concrete Strength
and Durability Tests’, Journal of the School of Engineering, ISSN No: 0126-8589, Vol.11, No.1, MARA Institute Technology, Shah Alam, Selangor
2. Hamid, N.H.A, (2006), “In-plane and Biaxial Performance of Seismic Precast Wall with
Different Types of Energy Dissipators”, Jurnal Teknologi, UTM, ISSN 0127-9696, No.
44, Jun 2006, pp 47-62.
3. Hamid, N.H.A, and Surdano, I (2006), “Dynamic Response of Slender/Thin
Reinforced Precast Concrete Walls Using Shaking Table”, IEM Journal, KDN PP5476/7/2006, ISSN No: 0126-513X, Vol. 67, No. 3, Sept 2006, pp 18-25.
4. Khare, R.K., Dhakal, R.P, Mander, J.B., Hamid, N.H.A, and Maniyar, M.M., (2007),
“Mitigation of Seismic Financial Risk of Reinforced Concrete Walls by Using
Damage Avoidance Design, ISET Journal of Earthquake Technology, ISSN 0972-0405, Vol. 44, No 3-4, Sept-Dec 2007, pp 391-407.
5. Hamid, N.H.A, Mander, J.B., and Surdano, I., (2007), “Dynamic Overturning
Capacity of Rocking Precast Thin Wall Structures”, IEM Journal, KDN
PP5476/7/2006, ISSN No: 0126-513X, Vol. 68, No. 3, Sept 2007, pp 48-55.
6. Hamid, N.H.A, and Linayage, L., (2007), “Biaxial Behaviour of Thin Concrete Walls with Rocking Base Connections”, IEM Journal, KDN PP5476/7/2006, ISSN No: 0126-513X, Vol. 68, No. 4, Dec 2007, pp 7-16.
7. Hamid, N.H.A, Linayage, L., and Mander, J.B., (2008), “Seismic Behaviour of
Thin/Slender Concrete Walls with Monolithic Emulation Base Connections Tested on Shaking Table”, IEM Journal, KDN PP5476/7/2006, ISSN No: 0126-513X, Vol. 69, No. 2, Jun 2008, pp 7-17.
8. Hamid, N.H.A, (2008), “Seismic Behaviour of Monolithic Wall Panel Subjected to
Quasi-Static Lateral Cyclic Loading”, IEM Journal, KDN PP5476/7/2006, ISSN No: 0126-513X, Vol. 69, No. 3, Sept 2008, pp 10-17.
9. Hamid, N.H.A, (2010), “A Concept Development and Proposed Design Procedure for Rocking Precast Hollow Core Wall in Warehouse”, IEM Journal, KDN PP5476/7/2006,
ISSN No: 0126-513X, Vol. 71, No. 2, Jun 2010, pp 18-26. 10. Hamid, N.H.A and John B. Mander, (2010), “Lateral Seismic Performance of
Multipanel Precast Hollowcore Walls”, Journal of Structural Engineering, ASCE, Vol. 136, No. 7, July 1, 2010, ISSN: 0733-9445/2010/7-1, United States of America.
11. Hamid, N.H.A. (2010), “Assess Seismic Performance of Three Types of Concrete Structural Wall Panels Using Fragility Curves”, Malaysian Construction Research
Journal (MCRJ), CREAM, CIDB, ISSN No: 1985-3807,pp13-28.
12. Hamid, N.H.A. (2010), “Seismic Performance of Beam-Column Joints Reinforced Concrete Buildings subjected to reversible Vertical Cyclic Loading, Malaysian Journal of Civil Engineering, Penerbit UTM, ISSN No: 1823-7843, Vol. 22, No. 2, pp 264-
290.
13. Hamid, N.H.A., (2011), “ Validation between Direct Displacement Based Approach and Experimental Work Using Precast Hollow Core Wall Panel, Australian Journal of Structural Engineering, Institution of Engineers Australia, ISSN No: 1823-7843.
14. Hamid, N.H.A., Masrom, M.A. (2012), “Seismic Performance of Wall-Slab Joints in Industrialized Building System (IBS), Under Of-plane Reversible Cyclic Loading, International Association of Computer Science and Information (IACSIT), ISSN No:
1973-8236, pp26-33.
15. Kay Dora, A.G. and Hamid, N.H.A, (2012). “ Seismic Performance of SFRC Beam-Column Joint with Corbel under Reversible Lateral Cyclic Loading”, International
Association of Computer Science and Information (IACSIT), ISSN No: 1793-8236, pp76-80.
16. Hamid, N.H. Hamid and Mander, J.B.,(2012). “A Comparative Seismic Performance Between Precast Hollow Core Walls and Conventional Walls Using Incremental
Dynamic Analysis” , Arabian Journal for Science and Engineering, October 2012, Volume 37, Issue 7, ISSN No: 1319-8025, Springer, pp1801-1815.
17. Al-Aghbari, A.N, Hamzah, S.H., Hamid, N.H, and Abdul Rahman, N. (2012), “Structural Performance of Two Types of Wall Slab Connection Under Out-of-Plane
Lateral Cyclic Loading, Journal of Engineering Science and Technology, Vol. 7, No.2, (2012),pp 394-397, Scopus Index.
18. Abdullah, S. and Hamid, N.H, (2012), “Modeling of Turbine-generator and Foundation as Single Degree of Freedom Using Ruaumoko Programme, International
Journal of Engineering and Advanced Technology (IJEAT), ISSN: 2249-8958, Vol. 2, Issue-2, December 2012, pp67-76.
19. Hamid, N.H.A., Mohamed, N.M.,Hamid, Z.A.,Ghani, S.H (2012), “Seismic Assessment of a full-scale bay double-storey House Using Fragility Curve”,
Malaysian Construction Research Journal, Volume 11, No.2, Scopus Elsevier, ISSN No: 1985-3807, pp65-77.
20. Abdul Rahman, N., Hamzah, S.H., and Hamid, N.H, (2012), “Seismic Behaviour of Wall-slab Connection with Steel Fibre subjected to Out-of-plane Lateral cyclic Load”,
Sustainability and Civil Engineering Journal, ISSN No: 2289-3253, Vol. 1, No.1 (July 2012), Faculty of Civil Engineering, Universiti Teknologi Mara, Shah Alam, Selangor, pp1-17.
21. Hamid, N.H, and Fudzee, M.F. (2013), “Seismic Performance of Insulated Sandwich
Wall Panel (IWSP) Under IN-plane Lateral Cyclic Loading”, International Journal of
Emerging Technology and Advanced Engineering, ISSN No: 2250-2459, Vol. 3, Issue 3, March 2013, pp1-7.
22. Hamid, N.H, and Mohamad, N.M., (2013), “ Seismic Assessment of a Full-scale
Double-Storey Residential House using Fragility Curve, Procedia Engineering, SciVerse Science Direct, ISSN No: 187-7058, 54(2013) pp 207-221. Elsevier.
23. N.H. Hamid, N.M. Mohamed, S.A. Anuar, (2013), “Modeling of Single Bay Precast Residential House Using Ruaumoko 2D program”, International Journal of Civil,
Architectural, Structural and Construction, Vol: 8, No:12, pp 928-932. 24. N.H. Hamid, N.D. Hadi, K.D. Ghani, (2013), “Retrofitting of Beam-Column Joint
Using CFRP and Steel Plate”, International Journal of Civil, Architectural, Structural and Construction, Vol: 7, No: 12, pp 783-788.
25. Patrick L.Y. Tiong, Azlan Adnan and Nor H.A. Hamid, (2013), “Behaviour Factor and
Displacement Estimation of Low-Ductility Precast Wall System Under Seismic
Actions”, Earthquakes and Structures Journal (ISI/SCOPUS/Q1/Impact Factor=0.789/ H-Index=11), Vol: 5, No: 6, pp 625-655.
26. N.H. Hamid and K.D. Ghani, (2013), "Seismic Behavior of a Precast Hollow Core
Wall Under Biaxial Lateral Cyclic Loading", Safety and Security Engineering V, ISBN No:978-1845647445, WITPress, Wit Transactions on the Built Environment/SCOPUS INDEXED/Q4/H-INDEX=14), Vol. 134, pp 815-825.
27. K.D. Ghani and N.H. Ghani, (2013), "Experimental Investigation on A non-seismic
Precast RC Beam-column Exterior Joint Under Quasi-static Lateral Cyclic Loading", Safety and Security Engineering V, ISBN No: 978-1845647445, Vol. 134, pp 827-837.
28. S.A. Anuar, N.H. Hamid and M.H. Hashim, (2014), “Retrofitting of Single Unit
Tunnel Form Building Using Steel Plate Under Out-Of-Plane Lateral Cyclic Loading”, Applied Mechanics and Materials/SCOPUS/Q3/H-Index=17), Vol: 661, pp 95-99.
29. Shamilah Anudai Anuar and Nor Hayati Abdul Hamid, (2014), “Comparison of Seismic Performance Between Single and Double Unit Tunnel”, Applied Mechanics
and Materials/SCOPUS/Q3/H-Index=17), Vol: 567, pp 687-692. 30. Hamid, N.H., Anuar, S.H. And Azmi, N.L., (2014), “Retrofitting of a Double Unit
Tunnel Form Building Using Additional RC Wall”, Applied Mechanics and Materials/SCOPUS/Q3/H-Index=17), Vol: 661, pp 123-127.
31. Tukiar, M.A., Kay Dora A.G. And Hamid, N.H, (2014), “Seismic Performance and
Assessment of Precast Beam-Column Corner Joint Subject to Reversible Lateral
Cyclic Loading”, Applied Mechanics and Materials/SCOPUS/Q3/H-Index=17), Vol: 661, pp 128-133.
32. S.A. Anuar, N.H. Hamid and M.H. Hashim, (2014), “Comparison of Seismic
Performance For Single Unit Tunnel Form Building Before and After Repaired”,
Applied Mechanics and Materials/SCOPUS/Q3/H-Index=17), Vol: 905, pp 254-258.
33. Kay Dora Abd Ghani, Nor hayati Abdul Hamid and Mulhd Salmizi Jaafar, (2014),”
Load Versus Displacement Validation Between Ruaumoko Hysteresis Program And Experimental Work on CFRP Retrofitted Precast beam-column Exterioe Joint”, Key
Engineering Materials/SCOPUS/Q3/H-Index =38, Vol: 594-595, pp 390-394.
34. S.A. Anuar, N.H. Hamid, M.H. Hashim, (2014), “Comparison of Seismic Behaviour for A Single Unit Tunnel Form RC Building Before and After Repaired”, Advanced Materials Research/SCOPUS/Q4/H-Index=22, Vol: 3, No: 905, pp 254-258.
35. Mohd faiz Md Fudzee and Nor Hayati Abdul Hamid, (2014), “Seismic Performance of
Insulated Sandwich Wall panel Subjected To Lateral Cyclic Loading”, Key Engineering Materials/SCOPUS/Q3/H-Index =38, Vol: 594-595, pp 1020-1024.
36. N.H. Hamid, S.M. Saleh and S.A. Anuar, (2014), "Seismic Performance of Double-unit Tunnel Form Building Under in-plane Lateral Cyclic Loading", Structures Under Shock and Impact XIII, ISBN: 978-1-84564-796-4, WITPress, Wit Transactions on
the Built Environment/SCOPUS INDEXED/Q4/H-INDEX=14), Vol. 141, pp 467-478.
37. N.H. Hamid and S.A. Anuar, (2014), "Seismic Risk Assessment of Three Types of Exterior Beam-column Joints Using Fragility Curves" Risk Analysis IX, ISBN No: 978-
1-84564-792-6, WITPress, Wit Transactions on the Built Environment/SCOPUS INDEXED/Q4/H-INDEX=14),Vol. 47, pp 85-96.
38. N.H. Hamid and John B. Mander, (2014), “Damage Avoidance Design For Buildings”, KSCE Journal of Civil Engineering/ISI/SCOPUS/Q3/Impact Factor=0.600/H-Index
=15, Vol:18, No:2, pp 541-548.
39. Nor Hayati Abdul Hamid, Nor Mayuze Mohamad, Zuhairi Abd Hamid and Syed Hazni
Abd Ghani, (2014), “Seismic Behaviour of Precast Shear Key Wall Under In-plane Lateral Cyclic”, Malaysian Construction Research Journal/SCOPUS INDEXED
JOURNAL/Q4/H-Index=3), Vol:15, No:2, pp 63-73.
40. N.H. Hamid, N.M. Mohamed, S.A. Anuar, (2014), “Modeling of Single Bay Precast
Residential House Using Ruaumoko 2D Program”, International Journal of Civil and Environmental Engineering, Vol:1, No.12 (2014), pp 100-106.
41. S.A. Anuar, N.H. Hamid, M.H. Hashim, S.M.D. Salleh, (2014), “Comparison of
Double Unit Tunnel Form Building Before and After Repair and Retrofit Under In-
plane Cyclic Loading”, International Journal of Civil and Environmental Engineering, Vol:1, No. 12, 2014 pp 1127-1130.
42. N.H. Hamid, A. Azmi, M.I. Adiyanto, (2015), “Seismic performance of Two-Storey
RC Frame Designed Using EC8 Under In-plane Cyclic Loading”, International
Journal of Civil and Environmental Engineering, Vol:2, No.9 (2015), pp 290-296.
43. N.H. Hamid, M.S. Syaref, M.I. Adiyanto, M. Mohamad, (2015), “ Experimental Study on Single Bay RC Frame Designed Using EC8 Under In-plane Lateral Cyclic Loading”, International Journal of Civil and Environmental Engineering, Vol:2,
No.12 (2015), pp 120-126.
44. Yee Hooi Min, Kay Dora Abd Ghani, N.H. Hamid, Mohd Nasir Abdul Hadi, (2016), “Architectural Tensioned Fabric Structure in Monkey Saddle Form”, International
Journal of Control Theory and Applications, International Science Press ISBN 0974-5572, pp 2753, Vol. 9, Issue 6. India.
45. S.A. Anuar, N.H. Hamid and Mohd Hisbany Mohd Hashim, (2016), “Experimental
Study on Seismic Behavior of Repaired Single and Double Unit Tunnel Form Building Under In-Plane Cyclic Loading”, Malaysian Construction Research Journal, CREAM, ISSN 1985-3807, Vol. 19, No.2, pp 19-28.
46. M.S. Jaafar, N.H. Hamid and Norma Hazira Mahmood, (2016), “The Behaviour of
Rocking Multi-column Pier of Unskewed Bridge Under Seismic Performance Using Quasi-Static Lateral Cyclic Loading”, Malaysian Construction Research Journal, CREAM, ISSN 1985-3807, Vol. 19, No.2, pp 29-37.
47. Mohd Ashaari Masrom, Nor Hayati Abdul Hamid and Mohd Elfie Mohamad, (2017),
“Experimental Study of Ductility Adequacy on Interior Wall-Slab Joint Subjected to Lateral Cyclic Loading”, ESTEEM Academic Journal, p-ISSBN 1675-7939, Vol.14, June 2017, 39-54.
48. M.A. Masrom, M.E. Mohamad, and N.H. Hamid (2017), “Seismic Performance of
Interior Wall-slab Joint in Tunnel-Form Building Designed to British Standard”, International Journal of Civil Engineering & Geo-Environment, ISSN No: 21802742,
Universiti Malaysia Pahang, Vol. 1, pp34-39.
49. Amin Mojiri, Wan Hui, Ahmad Kamil Arshad, Ahmad Ruslan Mohd Ridzuan, Nor
Hayati Abdul Hamid, Hossein Farraji, Ali Gholami and Amir Hossein Vakili (2017), “ Vanadium(V) removal from aqeous solutions using a new composite adsorbent
(BAZLSC): Optimization by response surface methodology”, Advances in Environmental Research Journal, Techno-press, Korea, Vol.6, No.3, pp 173-187.
50. MA Masrom, HM Yee, ME Mohamed, NHA Hamid (2017), “Seismic Performance On Stiffness And Hysteresis Loop Of Interior Wall-Slab Joint For Tunnel Form Building
Designs To British Standard”, Journal of Fundamental and Applied Sciences, ISSN No:1112 9867, Vol. 9, No. 5S, pp 75-87.
51. M. I. Adiyanto and M. Mohamad N. H. Hamid (2017), “Seismic Performance Of Single-Bay Two-Storey Rc Frame Under In-Plane Lateral Cyclic Loading”, ARPN
Journal of Engineering and Applied Sciences, Asian Research Publishing Network, Vol. 12, No. 22, pp 6502-6510.
52. NH Hamid, SA Anuar, H Awang, ME Kori (2018), “Experimental study on seismic behavior of repaired tunnel form building under cyclic loading”, Asian Journal of Civil
Engineering, Springer International Publishing, Vol.19, No.3, pp 343-354.
I. TECHNICAL REPORT
1. Hamid, N.H.A and Mohd Ridzuan, A.H. (2003), “ The Structural Behaviour of Precast Prestressed Hollowcore Slabs Subjected to Static Loading”, Bureau of Research and Consultancy, UiTM, Shah Alam, Selangor.
2. Hamid, N.H.A and Surdano, I. (2003), “ Performance of Thin Precast Concrete Wall
Panels Under Dynamic Loading”, Technical Report, ISSN No: 0110-4538,
Department of Civil Engineering, University of Canterbury, Christchurch, New Zealand.
3. Hamid, N.H.A and Linayage, l., (2004), “Biaxial Lateral Loading Behaviour of Thin
Concrete Walls”, Technical Report, ISSN No: 0220-5674, Building Research Association of New Zealand (BRANZ), Wellington, New Zealand.
4. Hamid, N.H.A, Hamzah, S.H., Rosli, M.I and Amin, N.M., (2010), “Seismic Performance on Multi-Storey Precast Buildings (IBS) in Malaysia Subjected to Long-
distant Earthquake Excitation”, Technical Report, No. Project: 03-01-01-SF0189, Research Management Institute (RMI), Universiti Teknologi Mara, Shah Alam, Selangor, pp220.
5. Hamzah, S.H, Hamid, N.H, Mirshad, A. and Rahman, N., (2012), “Application of Steel
Fibres in inhibiting Crack Propragation in Reinforced Concrete Connections Under Action of Lateral Cyclic Loading in IBS Construction”, Research Management Institute, Technical Report, e-Science/06-01-01-SF0322, Universiti Teknologi MARA,
Shah Alam, Selangor, pp250.
6. Hamid, N.H, Mohamed, N.M and Ghani, K,D, (2013). “ Seismic Performance of Non-seismic Wall Panel of IBS Double-Storey House Under Quasi-Static Lateral Cyclic
Loading. Research Management Institute, Technical Report 600-RMI/ST/DANA 5/3/Dst(486/2011), Universiti Teknologi MARA, Shah Alam, Selangor, pp250.
7. Nor Hayati Abdul hamid, Siti Hawa Hamzah, Kay Dora Abd Ghani, (2013), “Seismic Performance of Beam-column with Corbel Connections (IBS) in the Existiong Precast
Reinforced Concrete Frame Under Reversible Lateral Cyclic Loading”, pg 46
8. Nor Hayati Abdul Hamid, Mohd Faiz Bin Md Fudzee, (2013), “Seismic Performance of
a Single Load Bearing Insulated Sandwich panel Under In-plane Lateral Cyclic Loading”, pg 38.
9. Nor Hayati Abdul Hamid, Kay Dora Abd Ghani, Nurzalina Harun, (2014), “Responses
of Rocking Wall Model Under Earthquake Excitations Using Newton's Second Law of
Motion”, pg 46.
10.Nor Hayati Abdul Hamid, Kay Dora Abd Ghani, Nurzalina Harun, Shaharin Hamid, Abdul Halim Abdul Ghani, Muhd Salmizi Jaafar, (2016), “Seismic Behaviour of Precast Beam-Column Joints Designed in Accordance To Eurocode 8 Under In-Plane Cyclic
Loading”, pg 163.
J. PROCEEDING AND CONFERENCES 1. Hamid, N.H.A and Mohd Ridzuan, A.R., (1996), “The Structural Behaviour of Precast
Prestressed Hollow Core Slabs Subjected to Static Loading”, The 6th Proceeding of International Conference APSEC’96, ISBN No: 983-4561-23-4. UTM on 17-19 June
1996,Sekudai, Johor. 2. Hamid, N.H.A and Endut, I.R., (2002), “Precast/Prestressed Concrete in Seismic
Regions”, Proceeding on WCCMS 2002, ISBN No: 983-9414-33-X, 14-16 May 2002, Concorde Hotel, Shah Alam, Selangor.
3. Hamid, N.H.A and Mander, J.B., (2003), “The Application Damage Avoidance Design Philosophy in Seismic Regions”, Proceeding on Asia Pacific Conference on
Earthquake Engineering on !3 July 2003, New Zealand Earthquake Commission, University of Canterbury, Christchurch, New Zealand.
4. Hamid, N.H.A and Mander, J.B., (2003), “Experimental Performance of Precast
Hollow Core Walls Subjected to Bi-lateral Loading, “Proceeding on the Symposium
Park and Paulay on 13-15 February 2003, New Zealand Earthquake Commission, University of Canterbury, Chrristchurch, New Zealand.
5. Hamid, N.H.A, (2004), “The Behaviour of Precast Hollow Core Walls Subjected To
Gravity and Uniaxial Quasi-static Cyclic Loading”, Proceeding of FIDC on 5-8 Oct 2004, ISBN No: 967-1245-06-3, Concorde Hotel, Shah Alam, Selangor.
6. Hamid, N.H.A., (2005), “The Seismic Performance (Resilience) Assessment of
Precast Hollow Core Wall and Monolithic Wall Using Incremental Dynamic Analysis”,
National Conference NACEC2005 on 19-20 December 2005, ISBN No: 983-2608-07-4, KUITTHO, Parit Raja, Batu Pahat, Johor.
7. Hamid, N.H.A., (2006),” Experimental Seismic Performance on Multi-panel Precast
Hollow Core Wall in Warehouse Buildings”, National Conference of STSS2006 on 30-31 May 2006, ISBN No: 963-2607-8, Swiss Garden Resort & SPA, Kuantan, Pahang.
8. Hamid, N.H.A., (2006), “Design and Construction of Precast Hollow Core Slabs in Multi-storey Buildings”, International Proceeding of ICiBE2006 on 13-15 June 2006,
ISBN No:984-891-23-4, Renaissance Kuala Lumpur Hotel, Kuala Lumpur.
9. Hamid. N.H.A., (2006), “ Seismic Assessment on Three Types of Precast Wall Panels
Using Fragility Curves”, International Conference of ISCIE’06 on 3-5 July 2006, ISBN No: 983-9414-74-7, Faculty of Civil Engineering, UiTM, Shah Alam, Selangor.
10.Hamid, N.H.A., and Mander, J.B., (2006), “Experimental Study on Bi-lateral Seismic
Performance of Precast Hollow Core Wall using Shaking Table”, Proceeding on the
10th East Asia-Pacific Conference and Structural Engineering and Construction (EASEC-10) on 3-5 August 2006, AIT, Bangkok, Thailand.
11. Hamid, N.H.A., (2006), “ The Seismic Performance of Multi-panel precast Hollow
Core Wall under reverse quasi-static cyclic loading” , Proceeding on the 6th Asia
Pacific Structural Engineering and Construction (APSEC2006) on 5-6 Sept 2006, Sunway Lagoon Convention Center, Bandar Sunway, Selangor.
12.Hamid, N.H.A., (2006), “ Seismic Performance of Multi-panel precast Hollow Core
Walls with Sealant and Rubber Spacer”, Proceeding on 24th Conference of Asean
Federations of Engineering Organisations (CAFEO-24) on 29 Nov-2 Dec 2006, Bandar Sunaway, Selangor.
13.Hamid, N.H.A., (2007), “Seismic Assessment of Precast Wall Panels Using Fragility
Curves and Incremental Dynamic Analysis”, World Engineering Congress 2007 and
Environmental Engineering Conference (WEC’07) on 5-9 August 2007, Penang, Malaysia.
14.Hamid, N.H.A., and Mander, J.B., (2007), “Damage Avoidance Design of Warehouse Buildings using the Precast Hollow core wall system”, Proceeding on the 9th
International Conference on Asia-Pacific Earthquake Engineering on 13-17 Nov 2007, Nanyang Technology University, Singapore.
15.Hamid, N.H.A., (2008), “ A Comparative Seismic Performance Assessment of
Precast Hollow Core and Conventional Precast Walls “ Proceeding on International
Seminar on Civil & Infrastructure Engineering (ISCIE 2008) on 11-12th June 2008, ISBN No: 978-983-9414-84-4, Faculty of Civil Engineering, UiTM, Shah Alam,
Selangor.
16. Hamid, N.H.A., and Hamzah, S.H., (2008), “ Seismic Performance of a Cantilever
Precast Hollow Core Slab subjected to Vertical Cyclic Loading”, International Conference on Civil Engineering (ICCE’08) on 12-14 May 2008, Hyatt Regency
Kuantan Resort, Kuantan, Malaysia.
17. Hamid, N.H.A., and Bashah, A.S., (2008), “ Damage Avoidance Design of
Warehouse Buildings Using the Precast Hollow Core Walls System”, Poster Presentation, Proceeding on the 14th World Conference on Earthquake Engineering
on 12-17 Oct 2008, Beijing, China.
18.Hamid, N.H.A., and Mander, J.B., (2008), “Lateral Seismic Performance of Multi-panel Precast Hollow Core Walls Subjected to Quasi-Static Cyclic Loading”, Proceeding on the 14th World Conference on Earthquake Engineering on 12-17 Oct
2008, Beijing, China.
19.Hamid, N.H.A., and Rahman, N.A., (2008), “ Dynamic Overturning Capacity of Rocking Precast Thin Wall Structures”, Proceeding on 2nd International Conference on Science & Technology: Applications in Industry and Education on 12th -13th Dec
2008, ISBN No: 979-983-42204-2-6, Universiti Teknologi Mara, Pulau Pinang Malaysia.
20.Hamid, N.H.A., Seifi, M. (2009), “ Seismic Performance of Reinforced Concrete
Beam-Column Connections Subjected to Vertical Cyclic Loading”, Proceeding on the
10th International Conference on Concrete Engineering and Technology, CONCET’09 on 2-4 March 2009, ISBN No: 978-983-9414-85-1, Intekma Resort, UiTM, Shah
Alam, Selangor.
21.Seifi, M. and Hamid, N.H.A., (2009), “Drawback of Sheer Relying on Equivalent
Static Analysis Approach”, Proceeding on the 10th International Conference on Concrete Engineering and Technology, CONCET’09 on 2-4 March 2009, ISBN No:
978-983-9414-85-1, Intekma Resort, UiTM, Shah Alam, Selangor.
22.Hamid, N.H.A., (2009), “Seismic Behaviour of Precast Hollowcore Wall Panel Using
Three Different Types of Energy Dissipators”, 2nd Construction Industry Research Achievement International Conference (CIRAIC), 3-5 November 2009, Legend
Hotel, Kuala Lumpur, Construction Research Institute of Malaysia (CREAM), IBS Center, Jalan Chan Sow Lin, Cheras, Kuala Lumpur.
23. Nurharniza Abdul Rahman, Siti Hawa Hamzah, Nor Hayati Abdul Hamid, (2011), “Wall-slab Connection Performance Under Lateral Reversible Cyclic Load”, IPGS2011
- International Post-graduate Seminar, Kompleks Kejuruteraan, UiTM Shah Alam , Selangor.
24.Nor Hayati Abdul Hamid, Nor Mayuze Mohamad, (2011), “A study on the Seismic
Behaviour of Non-seismic Precast Wall Panel of Double-storey House”, IPGS2011 - International Post-graduate Seminar, Kompleks Kejuruteraan, UiTM Shah Alam,
Selangor.
25.Shamilar Anudai@Anuar, Nor Hayati Abdul Hamid, (2012), “Seismic Assessment of
Beam-column Connection Damage Using Fragility Curve”, IPGS2012- International Post-graduate Seminar, Kompleks Kejuruteraan, UiTM Shah Alam, Selangor.
26.Tukiar, M.A., N.H. Abd Hamid, (2012), “Performance of Precast Beam-column
Corner Joint With Corbel Subjected to Reversible Lateral Cyclic Loading”, IPGS2012-
International Post-graduate Seminar, Kompleks Kejuruteraan, UiTM Shah Alam, Selangor
27.Shafii Abdullah, Nor Hayati Abdul Hamid, (2012), “Modeling of Turbine-generator
and Foundation as Single Degree Freedom Using Ruaumoko Program”, IPGS2012-
International Post-graduate Seminar, Kompleks Kejuruteraan, UiTM Shah Alam, Selangor
28.Che Mohd Lukman Khalid, Nor Hayati Abdul Hamid, Kay Dora Abdul Ghani, (2012),
“Modeling of Hysteresis Loops of Precast Concrete Beam-column Joint Subjected to the Lateral cyclic Loading Using Ruaumoko Hysteresis program”, IPGS2012- International Post-g,raduate Seminar, Kompleks Kejuruteraan, UiTM Shah Alam,
Selangor
29.Kay Dora Abd Ghani and Nor Hayati Abdul Hamid, (2012), “Comparison of Ultimate Load, Moment Displacement between Analytical and Experimental of Beam-column Corner Joint Under Lateral Cyclic Loading”, IPGS2012- International Post-graduate
Seminar, Kompleks Kejuruteraan, UiTM Shah Alam, Selangor
30.A. Adnan, P.L.Y Tiong and A.B.A Rahman, (2012), “Ductility Factor RC Building Frames with Different Infill Wall Configurations Under Low Intensity Far Field Earthquakes Effects”, IPGS2012- International Post-graduate Seminar, Kompleks
Kejuruteraan, UiTM Shah Alam, Selangor.
31.N.D. Abdul Hadi And N.H. Abdul Hamid, (2013), “Lesson Learnt From Past Earthquakes in Malaysia”, Seminar Bencana Alam 2013, Adutorium Perpustakaan, Universiti Malaysia Sabah, Malaysia, pp 40-46.
32.Nurzalina harun, Nor hayati Abdul Hamid, Liza Nurul Fazila OK Rahmat, (2013),
“Dynamic Response of Two-storey Precast Concrete Building Under Peak Ground Acceleration”, SHUSER2013-Symposium on Humanities, Science and Engineering, Pulau Pinang.
33.Abdul Hamid, N.H., Nor Mayuze, M., (2013), “Modeling of Single-Bay Residential
House Using Ruaumoko 2D Program”, CAFEO31-Conference of Asean Federation of Engineering Organisations, Jakarta, Indonesia.
34.A.A. Shamilah and N.H. Hamid, (2013), “Seismic Performance of 3-storey Tunnel Form Building System Subjected Under Out-of-plane Cyclic Loading”, CAFEO31-
Conference of Asean Federation of Engineering Organisations, Jakarta, Indonesia.
35.Kay Dora A.G. And Hamid, N.H., (2013), “The usage of Precast beam-column Joint in Precast School Building Towards Green Buildings: A Comparison of Hysteresis
Loops Between Experimental and Modeling Work”, CAFEO31-Conference of Asean Federation of Engineering Organisations, Jakarta, Indonesia.
36.Mohd Faiz Md Fudzee and N.H. Hamid, (2013), “The Lateral capacity of Insulated
Sandwich Wall Panel Under Static Lateral Loading”, CAFEO31-Conference of Asean
Federation of Engineering Organisations, Jakarta, Indonesia.
37.N.D. Abdul Hadi, N.H. Abdul Hamid, K.D. Ghani, (2013), “Sustainability and Strengthening of beam-column Joint with Corbel Using CFRP and Steel Plate”, CAFEO31-Conference of Asean Federation of Engineering Organisations, Jakarta,
Indonesia.
38.A.G. Kay Dora and N.H. Abdul Hamid, (2013),” Experimental Investigation on Non-seismic Precast Beam-column Interior Joint Subjected to Lateral Cyclic Loading”, CECAR'2013- Civil Engineering Conference in Asia Region, TS16-17-TS16-23, 20-22
August 2013, Jakarta, Indonesia.
39.Nor Hayati Abdul hamid, che Mohd Lukman Khalid, Kay Dora Abdul Ghani, (2013),” Comparison Seismic Performance of Corner Beam-column Joint Between
Experimental and Modeling”, CECAR'2013- Civil Engineering Conference in Asia Region, TS1-88 -TS193, 20-22 August 2013, Jakarta, Indonesia.
40.Tarmizi L.H., Hamid, N.H. And Ghani K.D., (2013), “Modelling of 2-storey Precast School Building Using Ruaumoko Program “, IPGS2013- International Post-graduate
Seminar, Kompleks Kejuruteraan, UiTM Shah Alam, Selangor.
41.N.D. Abdul Hadi, N.H. Abdul Hamid, K.D. Ghani, (2013), “Seismic Retrofitting of Beam-column Joint Using CFRP and Steel Plate “,IPGS2013- International Post-
graduate Seminar, Kompleks Kejuruteraan, UiTM Shah Alam, Selangor.
42.Md Fudzee M.F. and Abdul Hamid, (2013), “Flexural Strength of Polyurethane
Sandwich Wall Panel For Industralized”, IPGS2013- International Post-graduate Seminar, Kompleks Kejuruteraan, UiTM Shah Alam, Selangor.
43.Shamilah Anudai@Anuar, Nor Hayati Abdul Hamid, (2013), “Seismic Performance of
3-torey Tunnel Form System Subjected to in-plane cyclic loading “,IPGS2013-
International Post-graduate Seminar, Kompleks Kejuruteraan, UiTM Shah Alam, Selangor.
44.Shamilah Anuar, Nor hayati Abdul Hamid, (2014), “Seismic Performance of High
Rise Buildings Constructed Using Tunnel Form System Subjected to Out-of-plane
Load”, IPGS 2014- International Post-graduate Seminar, Kompleks Kejuruteraanm UiTM, Shah Alam, Selangor.
45.Shamilah Anuar, Nor hayati Abdul Hamid and Mohd Hisbany Mohd Hashim, (2015),
“Strengthening of Single Bay Tunnel Form Building Using Steel Angle, Steel Plate
and CFRP Under Out-of-plane Cyclic Loading”, ICDMCE'2015 (International Conference on Disaster Management in Civil Engineering), page 21-26, 1-2 October
2015, Phuket, Thailand.
46.Hadi, N.D. and Hamid, N.H., (2015), “Stress-strain Relationship of Unbonded Fuse-bars Subjected to In-plane Lateral Cyclic Loading, ICDMCE'2015 (International
Conference on Disaster Management in Civil Engineering), page 27-32, 1-2 October 2015, Phuket, Thailand.
47.S.Y. Muhammad, N.H. Hamid and N.F. Hadi, (2015), “Seismic Performance of Interior Beam-Column Joint with Fuse-Bar Designed Using EC8 Under In-plane
Lateral Cyclic Loading”, ICDMCE'2015 (International Conference on Disaster Management in Civil Engineering), page 1-7, 1-2 October 2015, Phuket, Thailand.
48.N.H. Hamid, M.S. Jaafar, S.A. Anuar and N.H. Mahmood, (2015), “Seismic Behaviour of Unskewed Two Bridge Pier Under In-plane Lateral Cyclic Loading,
ICDMCE'2015 (International Conference on Disaster Management in Civil Engineering), page 8-13, 1-2 October 2015, Phuket, Thailand.
49.Nur Rusydiana Rusdin, Nor hayati Abdul Hamid, Taksiah A. Majid, Mohd Irwan Adiyanto and Mazlina Mohamad, (2015), “Hysteresis Loops and Equivalent Viscous
Damping of Single Bay Double Storey of RC Frame Subjected to In-plane Lateral Cyclic Loading”, 5th International Symposium on Technology for Sustainability,
ISTS 2015.
50.Nurain Rashidin Nor hayati Abdul Hamid, Taksiah A. Majid, Mohd Irwan Adiyanto
and Mazlina Mohamad, (2015), “Stiffness and Ductility of Single Bay Double Storey RC Frame Designed using Eurocode 8 Under In-plane Lateral Cyclic Loading”, 5th
International Symposium on Technology for Sustainability, ISTS 2015.
51.N.H. Hamid, M.F. Hussin, N.D. Hadi, M. Mohamad, (2015), “Validation Between
Experimental Work and Modeling of an Interior Beam-column Joint with Fuse-bars Using Hysteres Program”, ACEE2015 - International Conference on Advances in Civil
and Environmental Engineering, 3-5 March 2015, Bukit Mertajam, Pulau Pinang.
52.Mohamad Sakdun N.S., Abdul Hamid, N.H., Jamari N.A., (2015), “Seismic Energy
Dissiptaion of Insulated Sandwich Wall Panel Under Reversible Cyclic Load”, ACEE2015 - International Conference on Advances in Civil and Environmental
Engineering, 3-5 March 2015, Bukit Mertajam, Pulau Pinang.
53.N.H. Hamid, M.E. Mohamad, M.A. Masrom, S.A. Anuar, (2016), “ Seismic Behaviour
of Unrepaired and Repaired Tunnel Form Building Under In-plane Lateral Cyclic Loading”, International Conference on Concrete Engineering and Technology
(CONCET’2016), 31st May-2nd June 2016, Hotel UiTM, 40450 Shah Alam, Selangor.
54.R. Ismail, N.H Shamsudin, N.H. Hamid, (2016), “Modeling of Two-Storey Precast
School Building Using Ruaumoko 2D Program Using Bakun, Sarawak and Tawau, Sabah Earthquakes Records”, International Conference on Concrete Engineering and
Technology (CONCET’2016), 31st May-2nd June 2016, Hotel UiTM, 40450 Shah Alam, Selangor.
55.N. Saleh, N.H. Hamid, A.A. Azlin, N.H Yasim, (2016),”Modeling of Two-Storey Precast School Building Using Ruaumoko 2D Program (Case Study: Bukit Tinggi, Pahang)”,
International Conference on Concrete Engineering and Technology (CONCET’2016), 31st May-2nd June 2016, Hotel UiTM, 40450 Shah Alam, Selangor.
56.N.H. Hamid, A. Azmi, M.I Adiyanto, M. Mohamed, (2016), ‘ Seismic Behaviour of Two-
Bay Two-Storey RC Frame Under In-plane Lateral Cyclic Loading”, International Conference on Concrete Engineering and Technology (CONCET’2016), 31st May-2nd
June 2016, Hotel UiTM, 40450 Shah Alam, Selangor.
57.N.H. Hamid, M., Mohamed, N.H. Yasim, (2016) “Experimental Study on Single-Bay
Two-Storey RC Frame Under In-plane Lateral Cyclic Loading”, International Conference on Concrete Engineering and Technology (CONCET’2016), 31st May-2nd
June 2016, Hotel UiTM, 40450 Shah Alam, Selangor.
58.N.H. Hamid, N. Saleh, H, Awang,(2017), “Dynamic Performance and Modeling School
Building Using Ruaumoko 2D Program (Case Study: The 2007 Bukit Tinggi Earthquakes)”, International Congress on Innovations in Civil Engineering 2017 (ICE
2017), 15-16 November 2017, UTHM, Politeknik Port Dickson, Negeri Sembilan.
59.N.S. Mohamad Sakdun, N.A. Jamari, N.F. Imran, H. Muhamad Azlan, N.H. Hamid,
“Failure Modes of Insulated Sandwich Panel Under In-plane Static Loading”, Engineering, Science and Technology Colloquium (ESTEC’ 2017), Faculty of
Mechanical Engineering, UiTM, Pulau Pinang.
60.M.A. Masrom, M.E. Mohamad, N.H. Hamid, (2017), “Experimental Study on Lateral Strength of Wall-slab Joint Subjected To Lateral Cyclic Load, IGNITE-AICCE17, 8-10 August 2017, Toyohashi University Technology (TUT) and Universiti Sains Malaysia,
Park Royal Hotel, Pulau Pinang.
61.N.H. Hamid, K.D. Ghani and M.A. Masrom (2017), “Fragility Curve and Capacity-demand Spectrum Analysis for Two-storey Precast School Building”, IIESM and UNNES, InCIEC’2017, 7-8 August 2017, Gracia Hotel, Semarang, Indonesia.
62.M.A. Masrom, M.E. Mohamad, and N.H. Hamid (2017), “Comparative Study: Seismic
Performance Of Interior Wall-slab Joint Between Eurocode 8 and British Standard (BS8110) in tunnel form building”, IIESM and UNNES, InCIEC’2017, 7-8 August 2017, Gracia Hotel, Semarang, Indonesia.
63.M.K. Effendi and N.H. Hamid (2017), “ Three Dimensional Finite Element Study On
The Effect of Different Static Loading Position On Flexural Behaviour In Concrete Filled Square Steel Tubular Member”, IIESM and UNNES, InCIEC’2017, 7-8 August 2017, Gracia Hotel, Semarang, Indonesia.
64.M.Mohamad and N.H. Hamid (2017), “Ground Response Analysis In Offshore
Terengganu”, IIESM and UNNES, InCIEC’2017, 7-8 August 2017, Gracia Hotel, Semarang, Indonesia.
65.N.H. Hamid, N.F. Hadi and M. Mohamad (2017), “Validation Between Experimental and Modelled Hysteresis loops of corner beam-column joint using HYSTERES
Program”, IIESM and UNNES, InCIEC’2017, 7-8 August 2017, Gracia Hotel, Semarang, Indonesia.
66.N.H. Hamid and S.A. Anuar, (2017), “Seismic Performance Of Unrepaired Tunnel Form Building Under In-plane And Out-of-plane Lateral Cyclic Loading”, IIESM and
UNNES, InCIEC’2017, 7-8 August 2017, Gracia Hotel, Semarang, Indonesia.
67.S.A. Anuar and N.H. Hamid, (2017), “Seismic Performance Tunnel Form Building Under Ten Past Earthquake Records”, IIESM and UNNES, InCIEC’2017, 7-8 August
2017, Gracia Hotel, Semarang, Indonesia.
68.M.A. Masrom, M.E. Mohamad, N.H. Hamid, A. Yusuff and M.A. Tukiar, (2017),
“Seismic Resistance (SR) Joint For Tunnel-form Structures”, Engineering, Science and
Technology Colloquium (ESTEC’ 2017), Faculty of Mechanical Engineering, UiTM, Pulau Pinang.
69.Mohd Asha’ari Masrom, Mohd Elfie Mohamad, Nor Hayati Abdul Hamid, Amer Yusuff,
(2017), “Experimental study on lateral strength of wall-slab joint subjected to lateral
cyclic load”, AIP Conference Proceeding, AIP Publishing, Vol. 1892, No.1, pp 120001.
70.Kay Dora Abd Ghani, Mohd Azuan Tukiar, Nor Hayati Abdul Hamid,(2017), “Assessment of precast beam-column using capacity demand response spectrum subject to design basis earthquake and maximum considered earthquake”, AIP
Conference Proceeding, AIP Publishing, Vol. 1875, No.1, pp 030011.
K. RESEARCH GRANTS
1. The effectiveness of Water Tanks Positions as Multiple Tuned Liquid Damper, Grant
Bestari, UiTM, Shah Alam, Selangor, Total Fund: RM30,000.00; Duration = 2 years
(January 2018- December 2018).
2. Formulation Of Equivalent Viscous Damping Using Principle Of Conservation Of Energy, FRGS, MoHE; Total Fund : RM129,000; Duration = 3 years ( August 2016 -July 2019).
3. Disaster Mitigation And Prevention Research Group, DANA UiTM, Total Fund
=RM32,000 ; Duration = 3 years (Mei 2015 – April 2018).
4. Application of Steel Fibres in Inhibiting Crack Propagations in Reinforced Concrete
Wall Connections Under Action of Lateral Cyclic Loading in IBS Construction by e-Science Fund, MOSTI, Total Fund : RM210,000 ; Duration = 2 years (Dec 2009 –
October 2011). 5. Seismic Performance on Multi-storey Precast Buildings (IBS) in Malaysia Subjected
to Long-Distant Earthquake Excitation by eScience Fund, MOSTI, Total Fund: RM271,500; Duration = 2 years (Jan 2008- Dec 2009).
6. Seismic Behaviour and Performance of Precast Hollow Core Slab Seating on
Supporting Beam in Multi-Storey Buildings funded by IRDC, UiTM, Shah Alam with
Total Fund : RM 20,000. Duration = 1 year (Jan 2006 – Dec 2006)
7. Seismic performance of precast hollow core wall panels under bi-lateral, reverse quasi-static lateral cyclic loadings and simulated with gravity loading funded by FRST (Fundation Research,Science and Technology) Level 8, Price Waterhouse
Coopers Center, 119 Armagh Street, Christchurch, New Zealand Total Fund : RM 80,000, Duration = 2 year (2002-2004).
8. The Structural Behaviour of Precast Prestressed Hollow Core Slabs Subjected to Static Loading funded by BRC, ITM, Shah Alam, Total Fund : RM10,000, Duration
=1 year (Jan 1996- Dec 1997).
9. Investigation on the Physical Properties of Bricks as Load Bearing wall – Phase 1
funded by BRC, ITM, Shah Alam, Total Fund: RM10,000, Duration = 1 year ( Jan
1995-Dec 1996).
10.Seismic Behaviour Of Precast Beam-Column Joints Designed In Accordance To Eurocode 8 (EC8) Under Lateral Cyclic Loading, eScience Fund, MOSTI, Total Fund :RM336,300, Duration = 2 years ( April 2012- Mei 2014).
11.Responses Of Rocking Wall Model Under Earthquake Excitations Using Newton
Second Law Of Motion, FRGS, MoHE, Total Fund = RM119, 500, Duration= 2 years (July 2011- June 2013).
12.Sustainable Development Of Green Technology Tensioned Fabric Structures, RAGS, MoHE, Total Fund = RM80,000 , Duration = 2 years (Dec 2014 – Nov 2016).
13.Earthquake Response Of Multi-Panel Using Virtual Work Principle, RAGS, MoHE,
Total Fund = RM80, 000, Duration = 2 years (Dec 2014- Nov 2016).
14.Response Of Interior Wall-Slab Joints Subjected To Out-Of-Plane Loading Using
Ductility Theory, RAGS MoHE, Total Fund = RM75,000, Duration = 2 years (Dec 2014 – Nov 2016).
15.Seismic Performance Of Insulated Sandwich Wall Panel Using St Venant's Principle
And Kinematic Rigid Body Motion, ERGS, MoHE, Total Fund = RM80, 000, Duration
= 3 years ( July 2012 – Dec 2015)
16.Fast Non-Linear Dynamic Fem Software For The Rational Design Of Seismic Isolated Bridge, ERGS, MoHE, Total Fund : RM50,000, Duration = 3 years (July 2012 – June 2015)
17.Mathematical Modeling On The Dynamics Of Double-Storey Reinforced Concrete
Buildings Under Earthquake Attack, DANA UiTM, Total Fund = RM32,000, Duration = 2 years (June 2012 – Mei 2014)
18.Newton's Second Law Motion Of Rocking Multi-Column Pier Of Unskewed Bridge Under Seismic Performance Using Quasi-Static Lateral Cyclic Loading, FRGS, MoHE,
Total Fund = RM87,120 ; Duration = 2 years (April 2012- Mac 2014)
19.Seismic Performance Of Non-Seismic Wall Panel Of IBS Double-Storey House Under
Quasi-Static Lateral Cyclic Loading, DANA Kecemerlangan, UiTM, Total Fund = RM10,000 ; Duration = 2 years (Dec 2011 – Nov 2013)
20.Seismic Performance Of Beam-Column Corbel Connections (Ibs) In The Existing
Precast Reinforced Concrete Frame Under Reversible Lateral Cyclic Loading, DANA
Kecemerlangan, UiTM, Total Fund = RM9,000; Duration = 2 years ( June 2011- Mei 2013)
21.RC Wall-Slab Connection Enchanced With Steel Fibres Under Lateral Cyclic Load, DANA Kecemerlangan, UiTM, Total Fund = RM8,000; Duration = 2 years (Jan 2011
– Dec 2013)
22.Seismic Performance Of Load Bearing Insulated Sandwich Panel Under Quasi-Static Lateral Cyclic Loading, DANA Kecemerlangan, UiTM, Total Fund = RM8,000; Duration = 2 years (Dec 2010 – Nov 2013)
L. CONTRACT AND COLLABORATION RESEARCH
1. Research Collaborations with CREAM/JKR/LLM/MMD/UTM/IEM on “Seismic
Behaviour of Two-Storey Wall Panels Using IBS Under Reversible Lateral Cyclic Loading” conducted at CREAM, Makmal Kerja Raya Malaysia, Jalan Chan Sow Lin,
Kuala Lumpur. 2. Contract Research with Zenbes Sdn Bhd with project entitled “ Flexural and Shear
Capacities of In-filled CMU Blocks, Registered No: 100-RMI-p37/7/2122, Research Management Institute (RMI), Universiti Teknologi MARA, Shah Alam, Selangor.
3. Research Collaborations with Faculty of Civil Engineering, Universiti Sains Malayssia
entitled “Seismic Performance of Reinforced Concrete Frame Designed Using EC8 Under In-plane Lateral Cyclic Loading” with Faculty of Civil Engineering, Universiti Teknologi MARA on Dec 2014.
4. Research Collaborations with USM, UTM, UMS, UTHM and UKM entitled “ Kajian
Gempabumi di Ranau, Sabah on Jun 2015.
M. CONSULTATION WORKS
1. Beam-Column Joint Under In-Plane Lateral Cyclic Loading ; Cost Of The Project : RM14,000.00; Name Of Client: Fakulti Kejuruteraan Awam, Unversiti Kebangsaan Malaysia, Bangi; Duration : 06/01/2017 - 08/02/2017 ; Type Of Service : Testing
Maintenance.
2. Kajian Resistivity Untuk Air Tanah Di Jegor, Gual Ipoh Dan Batang Merbau, Tanah Merah, Kelantan; Cost Of The Project: RM19,080.00; Name Of Client: Jabatan Air Negeri Kelantan; Duration: 02/08/2017 - 04/09/2017; Type Of Service : Professional
Services.
3. Kajian Electrical Resistivity Test For Sub Surface Profiling At UiTM-MTDC UiTM Shah Alam Selangor; Cost Of The Project: RM14,734.00: Name Of Client: MTDC, Ground Floor, Menara Yayasan Tun Razak, Jalan Bukit Bintang, Kuala Lumpur: Duration:
26/12/2017-30/1/2018; Type of Service : Professional Services.
4. Geotechnical Site Investigation For Detail Design Stage For Tekai Hydroelectric Project- Additional Phase; Cost of Project: RM10,080.00; Name of Client: Ideal Engineering Laboratory Sdn Bhd; Duration: 01/12/2015 - 31/12/2016; Type of
Service: Professional Services.
5. Kerja-Kerja Penyiasatan Sub-Permukaan Tanah Dengan Menggunakan Kaedah
Pengimejan 2-D Resistivity Di Bagan, Sekinchan Selangor; Cost of Project: RM 1,000.00; Name of Client: Geores Resources; Duration: 15/09/2017 - 18/09/2017;
Type of Service : Professional Services.
6. Kajian Menggunakan Kaedah Electricity Resistivity Imaging Bagi Air Bawah Tanah Di
Lra Pintu Geng, Kota Bharu , Kelantan; Cost of the Project : RM7,500.00; Name of Client : Air Kelantan Sdn Bhd; Duration: 26/02/2017 - 25/03/2017; Type of Service:
Professional Services.
7. Kajian Sumber Air Bawah Tanah Di Wilayah Persekutuan-Resistivity Survey Work At
Jalan Kolam Air, Kuala Lumpur; Cost of Project: RM11,500.00; Name of Client: Geo Strata Sdn Bhd; Duration of project: 03/01/2017 - 31/12/2017; Type of Service:
Professional Services.
8. Geotechnical Assessment For Building And Slope At ICRACU Building International
Islamic University Malaysia, Kuantan Campus, Pahang; Cost of Project: RM38,796.00 Name of Client: Kumpulan Ikram Sdn Bhd; Duration : 29/07/2016 -
31/12/2017; Type of Service : Professional Services.
9. Kerja-Kerja Electrical Resistivity Survey Dengan Menggunakan Empat Kabel, Cost of Project: RM2,000.00; Name of Client: Geores Resources Sdn Bhd; Duration: 11/1/2018-20/1/2018; Type of Service : Professional Service.
10.Soil Investigation Di Atas Lot 3443 Kampung Sungai Pusu, Mukim Setapak, Selangor;
Cost of Project: RM5,000.00; Name of Client: GAC Builders Sdn Bhd; Duration: 4/4/2018 – 10/4/2018; Type of Service: Professional Services.
11. Workshop And Training On Geotechnical Laboratory Testing At IIESM, Cost of Project: RM3,392.00; Name of Client: BTS Engineering Sdn Bhd; Duration:
18/4/2018 – 19/4/2018; Type of Service: Seminar/Conference.
12. Lateral Load Test For Corrugated Shear Wall, Cost of Project: RM8,480.00; Name
of Client: Fakulti Kejuruteraan dan Alam Bina, Universiti Kebangsaan Malaysia, Duration: 1/5/2018 – 31/8/2018; Type of Service: Professional Service.
N. TEACHING AND SUPERVISION TEACHING
Subjects for Undergraduate : Structural Steelwork Design
Static and Dynamic Reinforced Concrete Design Multi-Storey Design Project
Prestressed Concrete Design
Subjects for Postgraduate: Structural Dynamic and Earthquake Engineering Seismic Design of Reinforced Concrete Buildings Using Eurocode 8
Advanced Mechanics of Concrete and Precast Structures
SUPERVISION:
PhD/Sarjana/
Sarjana Muda/
(Title and Student’s name)
Completed
PhD Structural Performance of Hybrid Wall Panels Under Axial Load and In-plane Lateral Cyclic Loading – Muhammad Asyraf Ahmad
PhD Seismic Performance of Beam-column joint
using SFRC under in-plane lateral cyclic loading – Saleh Yhya Saleh Laseima
PhD Based Isolation System for Hybrid RC Frame to
Resist Seismic Load-Ili Farhana Azmi
PHD Seismicity Of Malaysia Continental Shelf And Its Impact On Offshore – Mazlina Mohamad
PHD Seismic Performance Of Beam-Column Joint With Fuse-Bar Under In-Plane Lateral Cyclic
Loading – Nurfarhana Diyana Abdul Hadi
PHD Investigation On Potential Usage Of Water Tank As A Passive Tune Liquid Damper – Izzul Syazwan Ishak
PhD Seismic Performance Of Load Bearing
Insulated Sandwich Panel Under Quasi-Static Lateral Cyclic Loading – Mohd Faiz bin Mohd
Fudzee
PhD Structural Performance of Wall-Slab Connection in Steel Fabric Reinforced Concrete Wall Panel System – Nurhaniza Abdul Rahman
August 2012
PhD
Seismic Performance Between Unrepaired and
Repaired of Tunnel Form Building Under Lateral Cyclic Loading – Shamilah Bt Anudai @ Anuar
October 2016
PhD Seismic Performance of Full-scale Precast Non-
Seismic Beam-column Joints with Corbels Under In-plane Lateral Cyclic Loading – Kay Dora Abd Ghani
January
2015
PhD Seismic Behaviour of Beam-column steel
connection subjected to lateral cyclic loading – Azli Shah Azli Basha
-
Sarjana
(Research)
Repair and Retrofitting of RC Frame Using CFRP,
Steel Plate and Enlarged Column-Nurul Hawa Fatin Mohd Yasim
Sarjana
(Research)
Validation of Experimental and Modelling of
Single-storey Tunnel Form Building Under Earthquake Loads- Najia Karimi
Sarjana (Research)
Seismic Performance of IBS Using Ruomouko Program
-Wan Eika Tanukasih Wan Che Daud
-
Sarjana (Research)
Seismic Behaviour of Two Storey Precast Wall Panels Using IBS under Reversible Lateral Cyclic
Loading – Nor Mayuze binti Mohamed
April 2014
Sarjana (Research)
Modeling of Two Storey Precast Wall Panels Using Ruaumoko Program – Noriizati Bin Ibrahim
-
Sarjana
(Research)
Seismic Response Of Haunched Interior Wall-
Slab Joint Under Out-Of-Plane Cyclic Loading – Mohd Elfie Mohamad
-
Sarjana
(Research)
Development On New Forms Of Tensioned
Fabric Structures – Mohd Nasir Abdul Masri
April 2016
Sarjana
(Research)
Modelling Of 24-Storey Tunnel Form Building
Which Designed Using Bs8110 Using Ruaumoko 2D – Nor Aznina Syafira Mohd Azmi
-
Sarjana
(Research)
Optimal Damages Prediction Model For Concrete
Building Due To Seismic Zonation – Nurhanis Shamsudin
-
Sarjana (Research)
Seismic Performance Of Single Bay Double Storey Rc Frame With Insulated Sandwich Panel
Under In-Plane Lateral Cyclic Loading- Nur Rusydiana Rusdin
-
Sarjana
(Coursework)
Modeling Of Hysteresis Loops For 2-Storey
Single Bay Of Reinforced – Ahmad Effendi Mohamad
Sept 2015
Sarjana (Coursework)
Modeling Of Hysteresis Loops For Two-Storey Double Bay Of Reinfroced Concrete Frane Using
Hysteres Program – Allim Abdullah
Sept 2015
Sarjana (Coursework)
Seismic Performance Double Bay Two-Storey RC Frame Under In-Plane Lateral Cyclic Loading
– Anis Azmi
Mac 2015
Sarjana (Coursework)
Seismic Performance Of Single Bay Storey RC Frame Under In-Plane Lateral Cyclic Loading – Muhammad Syazwan Muhammad Syaref
Mac 2015
Sarjana
(Coursework)
Seismic Performance Of Interior Beam-Column
Joint Designed According To Eurocode 8 Subjected To In-Plane Lateral Cyclic Loading – Syed Muhammad Syed Yahya
Mac 2014
Sarjana
(Coursework)
Hysteresis Loops Analysis Between
Experimental And Modeling Using Hysteres Program – Muhd Faiz Hussin
Mac 2014
Sarjana
(Coursework)
Retrofitting Of Double Unit Three Storey Tunnel
Form Building Using Additional Shear Wall And Steel Angle – Farah Wahida Arif
Sept 2013
Sarjana (Coursework)
Retrofitting Of A Double Unit Tunnel Form Building Using Additional RC Wall, Steel Angle
And CFRP – Nurliyana Azmi
Sept 2013
Sarjana (Coursework)
Seismic Performances Of 3-Storey Tunnel Form System Building With Double Units Subjected to
Lateral Cyclic Loading- Saleha Md Saleh
Sept 2013
Sarjana (Coursework)
Retrofitting Of Beam-Column Joint With Corbel Using Cfrp And Steel Plate Bonding – Nurfarhana Diyana Abdul Hadi
Mac 2013
Sarjana
(Coursework)
The Performance Of Non-Seismic Interior
Precast Beam-Column Joint With Corbel Using Ruaumoko 2d Modeling – Mohd Rashid Ya’acob
Mac 2013
Sarjana (Coursework)
Modeling Of Two-Storey Precast School Using Ruaumoko 2d Program – Luqmanul Hakim
Tarmizi
Sept 2013
Sarjana (Coursework)
Modeling Of Hysteresis Loops Of Precast Concrete Beam-Column Joint Subjected To The
Lateral Cyclic Loading Using Hysteres Program – Che Mohd Lukman Khalid
Mac 2012
Sarjana (Coursework)
Performance Of Precast Beam-Column Corner Joint Subjected To Reversible Lateral Cyclic
Loading – Mohd Azuan Tukiar
Mac 2012
Sarjana
(Coursework)
Modelling Of Beam-Column Corner Joint With
SFRC At Corbel Area Using Ruaumoko 2d Program – Amir Hossein Ghazanfari
Mac 2012
Sarjana
(Coursework)
Modelling Single Degree Of Freedom For
Turbine Foundation Using Ruaumoko 2d Program – Shafii Abdullah
Sept 2011
Sarjana (Coursework)
Seismic Performance Of Insulated Sandwich Wall Panel Under Reversible Cyclic Loading –
Noor Syafeekha Mohamad Sakdun
Sept 2011
Sarjana (Coursework)
Strength Capacity Of Insulated Sandwich Panel Under In-Plane Static Loading – Nurul Ain
Jamari
Sept 2011
Sarjana (Coursework)
Strength Of Precast Beam-Column Corner Joint With Steel Fiber Using Direct Displacement Based Method – Milad Aminmansour
Mac 2011
Sarjana
(Coursework)
Seismic Performance of Wall-slab Connection in
IBS (Industrialized Building System) Subjected to Lateral Cyclic Loading – Mohd Ashaari Bin
Masrom
Jun 2010
Sarjana (Coursework)
Assessment of Reinforced Concrete Beam-Column Joint using Fragility Curve – Shamilah Binti Anudai@Anuar
Jun 2010
Sarjana
(Coursework)
Modelling of Wall-slab connection of IBS using
Ruaumoko Program – Emilia
Dec 2010
Sarjana (Coursework)
Seismic Performance of Three-Storey Precast wall panel using Tunnel Form system – Mohd Samsudin
Dec 2010
Sarjana
(Coursework)
Modelling IBS building in Putrajaya using
Ruaumoko Programm –Diana Murni Binti Mohamad@Mohd Ghazi
Dec 2010
Sarjana (Coursework)
Modelling of Kondominum Crystal, Seksyen 7 using Ruaumoko Program – Iberahim bin Jantan
Dec 2010
Sarjana (Coursework)
Seismic performance of precast hollow core-slab supporting beam under vertical cyclic
loading-Mazlina Mohamad
July 2009
Sarjana (Coursework)
Seismic Behaviour of reinforced concrete wall panel design according to BS 8110 subjected to
lateral cyclic loading-Mohd Faiz MD Fudzee
July 2009
Sarjana (Coursework)
Current trends of beam-column connection and wall-slab using IBS in Malaysia-Mohd Arafat bin Muhamad Ariffin
Julai 2009
Sarjana
(Coursework)
Modeling of reinforced concrete wall panels
which design according to BS 8110 using RUAUMOKO-Emmy Sherina Ismail Hashim
July 2009
Sarjana Muda Ductility And Equivalent Viscous Damping Of
Single Bay Rc Frame Infilled With Mansory Wall Mac 2016
Under In-Plane Lateral Cyclic Loading – Mohd
Faris Azmi Razak
Sarjana Muda Capacity Strength Of Single Bay Rc Frame Infilled With Masonry Wall Under In-Plane Lateral Cyclic Loading – Nur Atiqah Nadzrulizan
Mac 2016
Sarjana Muda Repair And Retrofitting Of Single Bay RC Frame
Using Cfrp, Enlarge Column And Steel Plate – Muhammad Azeem Azlan
Mac 2016
Sarjana Muda Hysteresis Loops And Lateral Strength Of Wall-
Slab Joint Design Using Bs8110 Under Out-Of-Plane Cyclic Loading – Nur Adibah
Mac 2016
Sarjana Muda Ductility And Equivalent Viscous Damping Of Wall-Slab Joint Design Using Bs8110 Under
Out-Of-Plane Lateral Cyclic Loading- Mendrick Taangtorun Tisen
Mac 2015
Sarjana Muda Modelling Of Two-Storey School Building Under
Moderate Seismic Earthquake Excitation Using Ruaumoko 2D Program – Mohamad Fairuz Mohamad
Mac 2015
Sarjana Muda Modelling Of Two-Storey School Building Under
High Seismic Earthquake Excitation Using Ruaumoko 2D Program – Dinie Adree Mohamad
Mac 2015
Sarjana Muda Modeling Of Two-Storey Precast School Building Using Ruaumoko 2d Program (Case Study:
Sarawak Earthquake) – Mohammed Azauddin Bahari
Sept 2015
Sarjana Muda Modelling Of Two-Storey Precast School
Building Using Ruaumoko 2D Program (Case Study:Bukit Tinggi, Pahang – Asyyati Anis Azlin
Sept 2015
Sarjana Muda Modelling Of Two-Storey Precast School Building Using Ruaumoko 2d Program (Case
Study: Tawau, Sabah) – Nur Shamimi Rosli
Mac 2014
Sarjana Muda Lateral Strength Capacity And Equivalent Viscous Damping Of Interior Beam-Column
Joint Designed According Eurocode 8 Subjected To Lateral Cyclic Loading – Fuzai Syaffiq Mohd Fuad
Mac 2014
Sarjana Muda Modeling Of Hysteresis Loops Of Unskewed
Multi-Column RC Bridge Pier System Using Hysteresis Program – Nurul Hazwana Mohamad
Zain
Mac 2014
Sarjana Muda Repair And Retrofitting Of Unskewed Multi-Column Reinforced Concrete Bridge Pier Using
Cfrp Under In-Plane Lateral Cyclic Loading – Mohamad Ali Zainuddin
Sept 2015
Sarjana Muda Ductility And Stiffness Of Interior Beam-Column Joint Designed According To Eurocode 8
Subjected To Lateral Cyclic Loading – Muhammad Hamdan Yaacob
Sept 2014
Sarjana Muda Seismic Performance Of Three-Storey Tunnel
Form Building System Subjected To In-Plane Lateral Cyclic Loading – Yazeed Abdul Malek Mohd Al-Radhi
Sept 2012
Sarjana Muda Comparison Of Seismic Retrofitting Of One Unit
Tunnel Form Building Before And After Retrofitting Using Steel Plate Under Out-Of-
Plane Lateral Cyclic Loading – Farrah Wahida Saari
Sept 2013
Sarjana Muda The Seismic Performance Of Three-Storey Tunnel Form Building Subjected To Out-Of-
Plane Subjected To Out-Of-Plane Lateral Cyclic Loading – Maged Mohammad Ahmad
Sept 2012
Sarjana Muda Comparison Of Seismic Retrofitting Of One Unit
Tunnel Form Building Before And After Retrofitting Using CFRP Under In-Plane Lateral Cyclic Loading – Muhamad Syauqi Sukri
Sept 2013
Sarjana Muda Design Of Interior Beam-Column Joint
According To Eurocode 8 – Muhammad Noor Hazwan Sapuan
Mac 2014
Sarjana Muda Hysteresis Loops And Stress-Strain Relationship
Of Exterior Precast Beam-Column Joint In RC Building Under Lateral Cyclic Loading – Mustafa Yahya Ahmed
Sept 2012
Sarjana Muda The Strength And Ductility Of Precast Beam
Column Joint With Corbel Under Lateral Cyclic Loading – Fashihah Ghazali
Sept 2012
Sarjana Muda The Stiffness And Equivalent Viscous Damping Of Precast Beam-Column Joint With Corbel Area
Under Lateral Cyclic Loading – Siti Irani Mokhtar
Sept 2012
Sarjana Muda Ductility And Energy Dissipation At Interior Joint With Corbel Under Lateral Cyclic Loading –
Fazilah Azua Shapie
Mac 2012
Sarjana Muda Hysteresis Loops And Stress-Strain Relationship Of Precast Beam-Column At Interior Joint With
Corbel – Nur Farrah Ain Shamsuddin
Mac 2012
Sarjana Muda Stiffness And Strength Analysis On Precast Beam-Column At Interior Joint Wth Corbel Under Lateral Cyclic Loading – Siti Aishah Talib
Mac 2012
Sarjana Muda Flexural Strength Of Insulated Sandwich Panel
For Industralized Building System (IBS) – Nurul Suhaida Mohammad
Sept 2011
Sarjana Muda Tensile Strength On Cement Fiber Board Of
Insulated Sandwich Panel – Nur Ilya Farhana Md Noh
Sept 2011
Sarjana Muda Buckling Behaviour Of Insulated Sandwich Panel Under Pure Axial Load Only – Nur Hikmah
Kamarulzaman
Sept 2011
Sarjana Muda Buckling Behaviour Of Insulated Sandwich Panel Under Axial Load With Eccentricity – Nurul Zahirah Zulkipli
Sept 2011
Sarjana Muda Modelling Seismic Performance of Wall-slab
Connection of IBS under Lateral Cyclic Loading – Siti Hajar Abu Zaharin
April 2010
Sarjana Muda Modelling 8-storey Reinforced Concrete Building
Under Earthquake Excitation Using 2D Ruaumoko Programming – Khodijah Binti Abu Bakar
April 2010
Sarjana Muda Design of Wall-slab Connection of IBS using
BS8110 – Siti Norhidah Bt Mohd Naser April 2010
Sarjana Muda Experimental Work of Precast Wall-Slab
Connection of IBS Under Reversible Lateral Cyclic Loading – Nor Izzani Binti Zulkifli
April 2010
Sarjana Muda Seismic Performance of Reinforced Concrete
Column-Foundation Connection under Lateral Cyclic Loading using Cross-Bracing Reinforcement Bar - Mohd Ridzuwan Bin
Tingkun
Nov 2009
Sarjana Muda Seismic Performance of Column-Foundation Connection using Bend-up Bars subjected to
Lateral Cyclic Loading – Mohd Mahadi Bin Salleh
Nov 2009
Sarjana Muda Seismic Performance of Reinforced Concrete Column-Foundation Connection Designed using
Nov 2009
BS8110 Subjected to Lateral Cyclic Loading –
Nor Azuwan bin Ahyad
Sarjana Muda Modelling of A Cantilever Precast Hollow Core Slabs Subjected to Vertical Cyclic Loading Using LUSAS – Izzadin Ali Ahmed al-Shaez
April 2008
Sarjana Muda Seismic performance on Beam-column steel
connection subjected to Vertical Cyclic Loading – Ummu Hayati
April 2008
Sarjana Muda Modelling of Seismic Behaviour on Beam-
column steel Connection Subjected to Vertical Cyclic Loading Using LUCAS - Nur Syaferra Bt Mad Yusoff
April 2008
Sarjana Muda Seismic Behaviour of beam-column joint with
confined reinforcement bar subjected to cyclic loading according to BS8110-Nor Maslina bt
Nordin
November
2008
Sarjana Muda Seismic Behaviour of beam-column joint with bracing reinforcement bar subjected to cyclic loading (Construction) -Ahmad Ihsan Bin Awang
Noor
November 2008
Sarjana Muda Seismic Behaviour of beam-column joint with
bracing reinforcement bar subjected to cyclic loading according to BS 8110 (Analysis)- Faiza
Noor Binti Mahmud
November 2008
Sarjana Muda Seismic performance/behaviour of beam-column joint with bracing reinforcement bar
subjected to cyclic loading- Mohd Zubairi Bin Yusoff
November
2008
Sarjana Muda Seismic behaviour of beam-column joint design
according to BS 8110: subjected to cyclic loading (testing/analysis)- Nadhirah Binti Mohd
Najib
November
2008
Sarjana Muda Seismic behaviour of beam-column joint design
according to BS 8110: subjected to cyclic loading (testing/analysis)- Noor Azland Bin
Jainudin
November 2008
Sarjana Muda Seismic Behaviour of beam-column joint with confined reinforcement bar subjected to cyclic loading according to BS8110 – Ramdan Bin
Othman
November 2008
Sarjana Muda Seismic behaviour of headed stud between precast slabs and supporting beam under
vertical cyclic loading- Intan Lydia Mohd Adnan
April 2007
Sarjana Muda Experimental study on the behaviour of shear connectors between steel beam and precast
hollow core slabs under vertical cyclic loading - Ida Marlinda Muzahar
April 2007
Sarjana Muda Flexural strength of precast hollow core slabs under vertical loading - Helmiza Mohamad
April 2007
Sarjana Muda Seicmic behaviour of solid slab designed
according to BS 8110 under vertical cyclic loading - Mohd al Hafiz bin Zulkefly
April 2007
Sarjana Muda Design of reinforced concrete strong floor for structural dynamic testing - Mohd Aizuddin
Mohd Ramlan
April 2007
Sarjana Muda Modelling of seismic behaviour of fixed-base monolithic precast wall panels using Ruamouko
program - Abdool Abu Muttallif Abu Seman
Nov 2006
Sarjana Muda The seismic performance of a new design connection between beam and precast hollow
core slabs under vertical cyclic loading –Khairul Anuar Mohd Fuze
Nov 2006
Sarjana Muda Modelling of connection for precast hollow core slabs under vertical cyclic loading using
Ruamouko program - Ahmad Kamal Abdollah
Nov 2006
Sarjana Muda A study on Controlling and Monitoring delayed project – a case study on Pumphouse Power
Station ( Ahmad Tarmizi bin Mat Taib)
Nov 1999
Sarjana Muda A study on the control and monitoring project – a case study : oil unloading Jetty for 35000 DWT Vesel (Mohd Rosli bin Ishak)
Nov 1999
Sarjana Muda Computer program Design on Precast
Prestressed Hollow Slab (Mohd Azmri Abdullah)
(May 1997)
Sarjana Muda The comparative study between solid slab with
prestressed hollow core slab under static loading (Udzer bin Abdul Karim)
(Nov, 1996)
Sarjana Muda Line of Balance programme on repetitive works –Case study (Shaharuddin Abdul Samad)
(Nov 1996)
Sarjana Muda The study on the structural behaviour of
precast prestressed hollow core slab without topping under uniformly distributed load in service condition – Mohd Rizal Yusof
Mei 1995
Sarjana Muda A comparative study on the behaviour of one
way hollow core slab using ANSYS – Rozita bt Aris
Nov 1994
Sarjana Muda A comparative study on the behaviour of one
way hollow core slabs using ANSYS – Sharifah Raha bte Wan Abdul Rahman
Nov 1994
O. ACADEMIC AWARDS/MEDALS
No
NAMA ORGANISASI
PEMBERI ANUGERAH/PENGHARGAAN
TARIKH/ TAHUN
ANUGERAH/ PENGHARGAAN
PERINGKAT
1.
Institute of Research Development and
Commercialisation, UiTM (IDD Competition)
27.3.2008
Gold Medal
Universiti
2..
Malaysian Invention and Design
Society, ITEX’08, Competition
11.5.2008
Bronze Medal
Kebangsaan
3. Patent the product by the name “equakeWPS” wall panel
21.8.2008
UiLC, Universiti
Teknologi Mara, Shah Alam, Selangor
Kebangsaan
4.
Commercialize the product
“equakeWPS” wall panels
19.12.2008 CiDB, Malaysia Kebangsaan
5.
IID Competition organized by
Research Management Institute (RMI), UiTM, Shah Alam, Selangor. (13-15 January 2009)
13-15 January
2009
Gold Medal Universiti
6.
Exhibition Booth, MIIE’09 by
Malaysian International IBS Exhibition, IBS Convention
Center, IBS, Jalan Chan Siow
21-23 January
2009
Exhibitor Kebangsaan
Lin, Kuala Lumpur (21-23
January 2009)
7.
MTE’09 (Malaysian Technology Expo 2009) at Putra World Trade Centre, Kuala Lumpur.
(19-21 February 2009)
19-21 February
2009
Gold Medal Kebangsaan
8.
British Invention Show (BIS 2009)
Alexandra Palace, London
11-18 Oktober
2009
Silver Medal Antarabangsa
9.
IID 2009 (Faculty of Civil Engineering), Universiti Teknologi MARA, Shah Alam,
Selangor
27-30 Oktober 2009
Gold Medal Fakulti
10.
IID 2010 – Pertandingan
RekaCipta UiTM, Dewan Sri Budiman, UiTM, Shah Alam, Selangor
12-14 January 2010
Gold Medal Universiti
11.
MTE’10 (Malaysian Technology
Expo 2009) at Putra World Trade Centre, Kuala Lumpur.
(3-6 February 2010)
3-6 February
2010
Silver Medal Kebangsaan
12.
ITEX’10 (Innovation, Invention and Technology Exhibition, 2010), 14-16 May 2010 at
Kuala Lumpur Convention Center, KLCC.
14-16 May
2010 Gold Medal Kebangsaan
13.
IID’2011 (Innovation, Invention
and Design), 10th – 11th September 2011, Universiti Teknologi MARA Pulau Pinang
10-11 Sept
2011 Silver Medal Kebangsaan
14.
i-ENVEX 2013 (International
Engineering Invention & Innovation Exhibition, 16th -19th
April 2013, Universiti Malaysia Perlis
16-19 April
2013 Gold Medal Antarabangsa
15.
PIID 2014 (Penang Invention, Innovation and Design), Dewan
Bankuet, Hotel UiTM, UiTM Pulau Pinang
3-4
December 2014
Bronze Medal Kebangsaan
16. IIDEX2015 (Invention,
Innovation, Design Exposition
27-30 April
2015 Gold Medal Kebangsaan
2015), 27-30 April 2015,
Dewan Agung Tuanku Canselor (DATC), UiTM, Shah Alam, Selangor
17.
ITEX’15 (International,
Invention and Technology Exhibition), KL Convention
Center, Malaysia
21-23 May
2015 Silver Medal Kebangsaan
18.
IIDEX2016 (Invention, Innovation, Design Exposition 2015), 27-30 Sept 2016,
Dewan Agung Tuanku Canselor (DATC), UiTM, Shah Alam,
Selangor
27-30
September 2016
Silver Medal Kebangsaan
19.
PIID 2017 (Penang Invention, Innovation and Design), Dewan Bankuet, Hotel UiTM, UiTM
Pulau Pinang
25-26 April 2017
Gold Medal Kebangsaan
20.
MTE ‘2017 (Invention and Innovation Awards 2017) at
Putra World Trade Centre, Kuala Lumpur.
16-18
February 2017
Gold Medal Antarabangsa
21.
ITEX’2017 (International Invention, Innovation and
Technology Exhibition) at Kuala Lumpur Invention Center, Kuala
Lumpur
11-13 May 2017
Silver Medal Antarabangsa
22.
IIDEX2017 (Invention, Innovation, Design Exposition 2017), DATC, Universiti
Teknologi MARA, Shah Alam, Selangor
25-29 Sept 2017
Gold Medal Universiti
23.
IIDEX2017 (Invention, Innovation, Design Exposition
2017), DATC, Universiti Teknologi MARA, Shah Alam, Selangor
25-29 Sept 2017
Gold Medal Universiti
24.
IIDEX2017 (Invention, Innovation, Design Exposition
2017), DATC, Universiti Teknologi MARA, Shah Alam,
Selangor
25-29 Sept 2017
Silver Medal Universiti
25.
26. Outstanding Contribution for Raja Tan Sri Ir. Zainal Prize
(Certificate and Trophy)
April 2011 Trophy Kebangsaan
23. Kakitangan Perkhidmatan Cemerlang
December 1996
Certificate Universiti
24. Kakitangan Perkhidmatan
Cemerlang Jun 2011 Certificate Universiti
P. ASSESOR/EXAMINER
1. Internal Examiner for Ruzitah Binti Supinyeh, “ Structural Behaviour of Steel Fabric
Concrete Wall panel Under Eccentric Loading”, Master by Research (EC 780- 19 Mac 2009), Faculty of Civil Engineering, Universiti Teknologi Mara, Shah Alam Selangor.
2. Internal Examiner for Wan Muhammad Faris Wan Yusoff, “ Compressive Strength and Chloride Resistant by WPSA Geopolymer Concrete Containing RCA”, Master by
Research (EC780 -14 Mei 2015), Faculty of Civil Engineering, Universiti Teknologi MARA, Shah Alam, Selangor.
3. Internal Examiner for Mohd Suhelmiey Sobri, “ Structural Performance of Male-female Interlocking panel (M-FIP) Connection Using Crushed Concrete Waste Aggregate (CCWA), PhD, (EC990-29 September 2016), Faculty of Civil Engineering, Universiti
Teknologi MARA, Shah Alam, Selangor.
4. Internal Examiner for Mohd Hafiz Md Ali, “ Utilization of Used Cooking Oil as Foaming Agent in Lightweight Foamed Concrete Application”, Master by Research (EC780 – 5
Ogos 2016), Faculty of Civil Engineering, Universiti Teknologi MARA, Shah Alam, Selangor.
5. Internal Examiner for Hasnawi Khalid,”Development of High Quality Oil Palm Stem (OPS) Plywood for Structural Use”, ), PhD, (EC990-4 July 2017), Faculty of Civil
Engineering, Universiti Teknologi MARA, Shah Alam, Selangor. 6. External Examiner for Nabila Bt Rossley, “ The Behavior of Precast Wall Frame
Connection”, Master by Research (GS31104- 21 February 2014), Faculty of Civil Engineering, Universiti Putra Malaysia, Serdang, Selangor.
7. Panels for Master Programme by coursework for the following topics:
(i) Force deformation behaviour of deep cold-formed channel purlin with
Intermediate bridging
(ii) Structural Behaviour of Lightweight foamed concrete wall panel
(iii) Stress Analysis of steel fibre reinforced concrete wall
(iv) Development of Plastic Yield Surface for equal angle
(v) Performance of precast concrete wall to wall connection subject to shear test
(vi) Bridging of Deep Purlins in roof Construction : Numerical & Experimental
Investigations
(vii) Steel Chevron Bracing for Precast Reinforced Concrete Structure
(viii) Analysis on lightweight concrete wall panel with opening
(ix) Stress Analysis of steel fibre reinfroced concrete wall Panel
(x) Mechanical Properties of Palm Oil Fruit Bunch ASH(POFBA) Grade 30
Concrete by Using Destructive and Non-Destructive Testing
(xi) Estimating Seismic Characteristics and Vulnerability Indices of Ground (K-
value) for Bukit Tinggi, Pahang
(xii) Structural Behaviour of Lightweight Concrete Wall panel with Opening Under
Axial Load
(xiii) Stress Analysis of Steel Fibre Reinforced Concrete Wall Panel under Axial
Load
(xiv) Shear Strength of Girders with Profiled Webs with Web Openings
(xv) The study on the Behaviour of Plate Girder with Profiled Web Subjected to
Shear and Patch Load
(xvi) Study on Behaviour of Steel Plate Girder with Double Corrugated Webs
Under Patch Loading Using LUCAS.
Q. COMMITTEE MEMBERS 1. Technical Committee on Household Fittings and Buildings Accessories, Jabatan
Pengurusan Standard, SIRIM Berhad, Shah Alam, Selangor.
2. Member of the Reconstituted IEM Technical Committee on Earthquake Engineering,
Institute Engineers Malaysia, Petaling Jaya, Selangor.
3. Member of Journal/Sub-committee IEM Journal, Institute Engineers Malaysia,
Petaling Jaya, Selangor.
4. Committee Member for Malaysian Qualification Accreditation (MQA), Universiti Teknologi Mara, Shah Alam, Selangor.
5. Committee Member for Preparation Document for UiTM as Institutional Self Review
Portfolio, Universiti Teknologi MARA, Shah Alam, Selangor.
6. Core-Trainers for OBE-SCL, Faculty of Civil Engineering, UiTM, Shah Alam,
Selangor.
7. Ahli Jawatankuasa Penilai Kertas Cadangan Penyelidikan, Fakulti Kejuruteraan Awam, UiTM, Shah Alam.
8. Ahli Jawatankuasa CONCET2016 di Hotel UiTM, Shah Alam, Selangor.
9. Pegawai Perhubungan Perpustakaan 2017/2018, IIESM, Kompleks Kejuruteraan, Universiti Teknologi MARA, 40450 Shah Alam, Selangor
10.Chairman for INCIEC2017 at Hotel Gracia, Semarang, Indonsia on 7th to 8th August 2017 and co-organized by Universitas Negeri Semarang, Indonesia.
11. Internship at Inha University, Seoul, South Korea for the duration of one month
starting from 2nd February 2018 until 3rd Mac 2018.
R. REVIEWING ARTICLES IN JOURNAL/WORKING PAPER
1. Reviewer for Article of IEM Journal entitled "Lightweight Foamed Concrete Wall
Panel: Development and Implementation in Housing Industry'.
2. Reviewer for Article of IEM Journal entitled " Development of Design Response
Spectra for Northern Peninsular Malaysia Based on UBC 97 Code
3. Reviewer for Article of IEM Journal entitled "Improved Prediction of Pre-camber of
Post-Tensioned Prestressed I-Beam.
4. Reviewer for Article of IEM Journal entitled " Dynamic Response of Buildings
Equipped with Dissipation Energy System"”.
5. Reviewer for Article of IEM Journal entitled “Use of Recycled Cement - Based Slurry Water for Making Concrete"
6. Reviewer for Article of IEM Journal entitled "The performance of a Prefabricated
Vertical Drains Trial Embankment".
7. Reviewer for Article of IEM Journal entitled “ Modulus of Elasticity of Cement
Composites in Flexure.
8. Reviewer for Article of IEM Journal entitled “ Computational Modeling Method of
Wind Loads Prediction and Structure Interaction.
9. Reviewer for Article of CSSR 2010 entitled “ Effect of Aggressive Media on
Stabilization of Peat with Cement and Slag”.
10. Reviewer for Article of CSSR 2010 entitled “ Numerical Study on the Dynamic Response of a Semi-submersible Platform with Experimental Validation”.
11. Reviewer for Earthquake and Structures Journal 2013 entitled “Effects Of
Multi-Plastic Hinge On The Behavior Of High-Rise Rc Wall Buildings”.
12. Reviewer for IEM Journal 2011 entitled “ An Investigation On Recycling Of
Demolished Concrete”.
13. Reviewer for Earthquake and Structures Journal 2014 entitled “Seismic
Behaviour Of Beam-Column Joint Retrofitted With Ferrocement”.
14. Reviewer for IEM Journal 2011 entitled “The Performance Of A Prefabricated
Vertical Drains Trial Embankment”.
15. Reviewer for Malaysian Construction Research Journal 2012 entitled “ Structural Behavior Of 20-Storey Reinforced Concrete Buildings With Seismic, Wind
And Notional Loads”.
16. Reviewer for JESTEC Journal 2013 entitled “Fragmentation Issue In Malaysian Industrialised Building System (IBS) Projects”.
17. Reviewer for Journal of Zhejiang University 2014 entitled “Pseudo-Static Test
Research On Seismic Performance Of Precast Hollow Bridge Piers”.
18. Reviewer for Malaysian Construction Research Journal 2016 entitled “Statistical Forecast Model Of Internal Waves In Sulu Sea”.
19. Reviewer for Malaysian Construction Research Journal 2016 entitled
“Malaysian Bridges And The Influence Of Sumatran Earthquake In Bridge Design”.
20. Reviewer for International Conference On Advances In Civil And
Environmental 2015 Entitled “Study On The Base Isolator That Use To Reduce The Earthquake Risk”
21. Reviewer for International Conference On Advances In Civil And
Environmental 2015 Entitled “Study On Structural Behaviour Of Half-Scaled Precast Lightweight Foamed Concrete Sandwich Panel Subjected To Axial Load”.
22. Reviewer for KSCE Journal 2016 entitled “Experimental Study On Emulative
Hybrid Precast Concrete Shear Walls”.
23. Reviewer for E-Academica Journal entitled “Combined Effect Of Steel Slag As
A Partially Replaced Material For Coarse Aggregrates And Water-Cement Ratio On The Chloride Resistance Of Concrete”.
24. Reviewer for Malaysian Construction Research Journal 2015 entitled
“Dynamic Properties Of Elastometric Bearing Via Finite Element And Experimental Modal Analysis And Strength, Chloride Permeability Of Self Consolidating Concrete Using Waste Materials”.
25. Reviewer for International Conference On Advances In Civil And
Environmental 2015 Entitled “Black Hush Ash In Brick Application”.
26. Reviewer for International Conference On Advances In Civil And
Environmental 2015 Entitled “Ultimate Moment Capacity Of Thin-Walled Composite-Filled Beams At
Internal Support”.
S. PATENT OF PRODUCTS
1. Name of Product : Seismic Wall Panel Date of Filing : 22 January 2009
Application No: PI 2009 0290 Agent : Norizan Group of Companies Agent’s/Applicant’s File Ref. : RR/NI/203/IP-P/09/RR