ctlgs.heliotextil.com · 2019. 11. 4. · ref (reflective) finishings removal point: cold peel....
TRANSCRIPT
-
PRESENTATION
-
Shown images are for demonstration purposes only. Trademarks or logos belong to the respective holder.
-
INTRODUCTION
HELIOTransfers® correspond to heat transfers produced by Heliotextil that allow to customize various products and substrates using hot application processes.
Technology used in printing processes and materials achieves the highest level. This constitutes a self know how that results from a continuous research and development strategy.
The range available can generally be classified as follows:
Each quality has associated technical specifications and special finishings, allowing its suitabil-ity for the end use.
Beyond existing qualities, adapted solutions can be developed by our technical and research & development departments (r&d).
Among other products, Heliotextil creates, develops, produces and sells heat transfers under the name HELIOTransfers® using modern technologies, innovation, environmental sustainability, respecting human rights and health, by the orders of its customers mainly from the industrial domains of the textile and garments, sports, work wear, underwear, shoes and promotional items, located throughout the world.
01
Range General Classification Qualities
TRP Decorative Transfer, for less performing uses.HNHOFLK
RTR Roll to roll Transfer, for mass productions.HPSHPL
SUB Sublimation Transfer paper. FLSD
HELIO Technical Transfer, for more performing uses.
SSVR
VRFCP
PLUS
-
HEAT TRANSFERS
02
-
HELIO
General Characteristics
Iron Use
Presentation
Quality Certification
Colours
Dimensions (Useful Printing Area)
Graphic Quality
Does not stick or melt using iron directly over the applied transfer up to 120ºC keeping theiron moving.
Presented on a transparent film allows 100% quality inspection, perfect visualization and thecorrect placing of the motif before application.
● Certified product by several norms (consult “Quality Certifications”), namely “OEKO-TEX®Standard 100 Class I”, among others.● Comply with the requirements of the main brands.
“Base colours chart” available combined with our colours mixing system allows to matchdesired PANTONE® colours with high accuracy. No limits on number of colours.
● Up to 670x1000mm. ● REF (Reflective) quality up to 460x650mm.
High definition print (4 colour process/halftones), fine details and sharp edges.
Minimum Quantity Low minimum quantities of only 25 units, making it possible to develop samples, collections orsmall productions.
03
HELIO VR
“Very Resistant”● Very good resistance to friction● Washing up to 90ºC
“Flame Retardant”● Resistance to heat and flame● Very good resistance to friction● Washing up to 90ºC
● Workwear● Industrial laundry
● Workwear● Industrial laundry
HELIO VRF HELIO PLUS
Main Characteristics
Recommended Use
HELIO CP
“Coated Products”● Suitable for coated materials only● Low temperatures application
● Rainwear● Seawear (fishing, sports)● Special coated products
HELIO SS
“Smart Solution”● High elasticity● Smooth● Resistant● Low temperatures application
“Polypropylene Supports”● Elasticity● Smooth● Resistant● Very low temperatures application
Suits almost all textile materials.● Sportswear● Underwear● Bathwear● Etc.
Suits almost all textile materials.● Sportswear● Underwear● Bathwear● Etc.
Application Conditions
Temperature: 120-160ºCTime: 8-14 sec.Pressure: 3-6 BarRemoval Point: Hot PeelREF (Reflective) finishings removal point: Cold Peel.
Temperature: 150-190ºCTime: 10-14 sec.Pressure: 6-7 BarRemoval Point: Hot PeelREF (Reflective) and BM (Bright Matt) finishingsremoval point: Cold Peel.
Temperature: 120-130ºCTime: 10-12 sec.Pressure: 3-4 BarRemoval Point: Cold PeelREF (Reflective)finishings removal point: Cold Peel.
Temperature: 100-120ºCTime: 12-18 sec.Pressure: 3-4 BarRemoval Point: Warm Peel
Temperature: 180-200ºCTime: 12-16 sec.Pressure: 6-7 BarRemoval Point: Hot PeelREF (Reflective) finishings removal point: Cold Peel.
Washing Instructions
Indicated Bases
Coated materials, special finishings like Repellants, PU,PVC, etc.
Mainly polypropylene, high sensitivity to temperature.
Polyester, Cotton ormixtures.
Polyester, Cotton ormixtures.
Wide variety of materials: natural fibers (Cotton, etc),leather, synthetic fibers (Polyamide-Elastane, Polyester), with high elasticity, sensitive to high temperatures, etc.
Qualities
-
Legend:
1. Base should be clean before application.
2. Put the base on the heat press and position the transfer on the desired place.
3. Use the heat press with control of time, temperature and pressure.
4. Follow recommended application conditions indicated for each quality.
Application Sequence
HELIO
Storage
Tests
Recommendations
● Use a press with control of time, pressure and temperature.● Transparent film can be hot peel or cold peel. Please note that on REF (Reflective) and CP qualities, removal time is: cold peel.● The transfer reaches its maximal resistance 36 hours after its application.
● It is recommended to perform tests over the materials to be used.● Heliotextil is available to perform tests.
● Stock in a dry place, without dust and preferably with controlled temperature.● Do not expose to direct solar light or other heat sources.● Do not stack with weight.● In normal conditions recommended durability to apply a transfer is one year from its production.
ApplicationConditions
04
-
TRP
Quality Certification
Iron Use
General Characteristics
Do not use iron directly over the transfer once applied.
Product tested by several norms, consult “Quality Certifications”.
Minimum Quantity Minimum quantities vary by design and cost efficiency to be analyzed case by case.
Main Characteristics
Qualities
TRP HN TRP HO TRP FLKS
● Decorative transfer forvery wide range of uses.● Applied over differentmaterials, without hightecnhical performance.
● Offset transfer.● High printing quality,indicated for photographicimages or half-tones.● Applied over differentmaterials, without hightechnical performance.
● Flock Mono ColourTransfer.● Applied over different materials, without hightechnical performance.
Presentation Paper or transparent film Paper Flock paper - 5mm high
Graphic Quality High Very high Medium/Low
ApplicationConditions
Washing Instructions
Temperature: 160-180ºC Time: 12-15 sec. Pressure: 2-3 Bar
TRP FLKM
● Flock Multi Colour Transfer● Applied over different materials, without hightechnical performance.
RecommendedUse
● Underwear● Sportswear● Bathwear
● Shoes● Promotional textiles
● Textile products
● Underwear● Sportswear● Bathwear● Shoes and insoles● Promotional textiles● Textile products
Flock paper - 3mm high
Indicated Bases
Colours Reproduction toPANTONE® colours
Limited to availableflock colours.
Reproduction to PANTONE® colours with medium/low accuracy.
Wide variety of materials (not coated): natural and synthetic fibers, mixtures, leather, etc.
05
-
TRP
Legend:
1. Base should be clean before application.
2. Put the base on the heat press and position the transfer on the desired place.
3. Use the heat press with control of time, temperature and pressure. Follow the recommended application conditions.
4. Let the transfer cool and remove the transfer support while tepid.
Application Sequence
06
Storage
Tests
Recommendations
● Use a press with control of time, pressure and temperature.● The transfer support should be removed while tepid.● The transfer reaches its maximal resistance 36 hours after its application.
● It is recommended to perform tests over the materials to be used.● Heliotextil is available to perform tests.
● Stock in a dry place, without dust and preferably with controlled temperature.● Do not expose to direct solar light or other heat sources.● Do not stack with weight.● In normal conditions recommended durability to apply a transfer is one year from its production.
ApplicationConditions
-
RTR
Type of transfer
Quality Certification
Iron Use
Presentation
General Characteristics
● Heat transfer for Roll to Roll application.● Automatic application with immediate hot release.● Competitive solution for mass productions.
Do not use iron directly over the transfer once applied.
Product tested by several norms, consult “Quality Certifications”.
Paper or transparent film.
Colour Reproduction Reproduction to PANTONE® colours.
Graphic Quality High detail printing.
Minimum quantity
Dimensions
500 meters.
Width: 10mm up to 130mmLength: 10mm up to 250mm
No. of printing colours Front: up to 6 coloursReverse: 1 or 2 colours
Printing Colours Direct colours or 4 colour process.
Main Characteristics
Qualities
RTR HPS RTR HPL
“Hot Peel Strong”For strong colour supports.
“Hot Peel Light”For light colour supports.
Recommended Use ● Sportswear● Underwear
● Bath and swimming● Baby strollers
● Shoes and insoles● T-shirts
● Etc.
Application Conditions
Temperature: 170-200ºCTime: 1-5 sec.
Pressure: 2-3 Bar
Indicated Bases
Washing Instructions
Cotton, Polyamide, Polyester, no coated materials
07
-
RTR
Legend:
1. Follow the recommended application conditions and regulate the placement of the transfer on the base. Initiate the continuous application, placing the base on the press.
2. Remove the base from the press and continue the application.
Application Sequence
Storage
Tests
Recommendations
● Use a roll to roll press with control of time, pressure and temperature.● The transfer reaches its maximal resistance 36 hours after its application.
● It is recommended to perform tests over the materials to be used.● Heliotextil is available to perform tests.
● Stock in a dry place, without dust and preferably with controlled temperature.● Do not expose to direct solar light or other heat sources.● Do not stack with weight.● In normal conditions recommended durability to apply a transfer is one year from its production.
ApplicationConditions
08
-
SUB
Type of Heat Transfer
Iron Use
Presentation
General Characteristics
Transfer Paper for Sublimation.
Possible to iron the transferred motif after applied.
Paper in rolls or by piece.
Colour Reproduction Colour reproduction to required PANTONE®.
Graphic Quality Detailed printing with many colours.
Printing Colours Direct colours or 4 colours process.
Indicated Bases 100% Polyester or mainly Polyester composition.
Main Characteristics
Qualities
SUB FL SUB SD
● Flexo Printed Paper● Competitive solution for long runs in narrowapplications.
● Digital Printed Paper● Best solution for photographic or half tone images.● Competitive solution for small runs.
Recommended Use ● Sports outfits● Football equipments
● Cycling● Underwear
● Promotional Items● Etc.
Application Conditions Temperature: 190-210ºCTime: 20-30 sec.Pressure: 4-6 Bar
Dimensions Width: 10mm up to 150mmMotif Length: up to 250mm
Width: 10mm up to 1600mmMotif Length: up to 5 meters
Minimum Quantity 500 meters No minimums
Colours Direct colours or 4 colour processPANTONE® colours (Graphic or Textile)
No. of printing colours
Washing Instructions
Up to 6 colours No limits
09
-
SUB
Application Sequency
Storage
Tests
Recommendations
● Use a press with control of time, pressure and temperature.● The transfer reaches its maximal resistance 36 hours after its application.
● It is recommended to perform tests over the materials to be used.● Heliotextil is available to perform tests.
● Stock in a dry place, without dust and preferably with controlled temperature.● Do not expose to direct solar light or other heat sources.● Do not stack with weight.● In normal conditions recommended durability to apply a transfer is one year from its production.
ApplicationConditions
10
PAPER
FABRIC
-
1 - BADGE2 - SPONSOR SLEEVE3 - MAIN SPONSOR4 - NUMBER5 - BADGE
1 - NAME2 - MAIN SPONSOR3 - SPONSOR SLEEVE4 - NUMBER
1
2
3
4
1
2
4
3
5
COMMON DECORATION
-
INLINE
Heights:
- 100 mm
- 150 mm
- 250 mm
Heights:
- 100 mm
- 150 mm
- 250 mm
ROUND
Heights:
- 100 mm
- 150 mm
- 250 mm
CLASSIC
Height:
- 48 mm
CONDENSED
Height:
- 65 mm
ROUND
AVAILABLE COLORS
WHITE BLACK PMS 348 PMS 286 PMS 485 PMS 012 PMS 873 PMS 877
NUMBERS & LETTERS
-
BADGES: FLAT QUALITIES
COMMON SIZES (UP TO)
DIRECT COLORS HIGH DEFINITION
INTERACTIVE
EMBROIDERY EFFECT
SERIALIZATION NUMBERING SERIALIZATION + RFID CHIP
80mm 160mm
110mm
210mm
70mm
SPONSORS FRONT
SPONSORS BACK
BADGES
80mm 250mm
40mm
50mm
315mm
00
80mm
260mm
-
USER GUIDE
APPLICATION SEQUENCE
LEGEND:
1 - Base should be clean before application.
2 - Put the base on the heat press and position the transfer on the desired place.
3 - Use the heat press with control of time, temperature and pressure.
4 - Follow recommended application conditions indicated for each quality.
APPLICATION CONDITIONS
- Use a press with control of time, pressure and temperature.- The transfer reaches its maximal resistence 36 hours after its application.- Removal point: hot peel.
STORAGE
- Stock in a dry place, without dust and preferably with controlled temperature.- Do not expose to direct solar light or other heat sources.- Do not stack with weight.- In normal conditions recommended durability to apply a transfer is one yearafter its production.
TESTS - It is recommended to perform tests over the materials to be used.- Heliotextil is available to perform tests.
1 2
43
-
FINISHINGS
SP (Sports) REF (Reflective)
FLU (Fluorescent)
UV (Ultraviolet)PER (Pearlscent)
MET (Metallic)
16
-
FINISHINGS
GD (Glow in Dark) HD (High Definition)
GL (Glitter)
BM (Bright Matt)BTH (Breathable)
EB (Embroidery)
18
-
FINISHINGS
Resume
HELIOSS
HELIOCP
SP(Sports)
REF.
REF(Reflective)
MET(Metallic)
FLU(Fluorescent)
PER(Pearlescent)
UV(Ultraviolet)
GD(Glow in Dark)
HD(High Definition)
EB(Embroidery)
GL(Glitter)
BTH(Breathable)
BM(Bright Matt)
DESCRIPTION
Anti-migrationResistant to pigments migration of the bases.
ReflectiveCan be reproductedon desired colouror multicolours onthe same motif.
Metallic ColoursGold or Silver, bright or matt.
Fluorescent EffectsFluorescent colours.
Pearlescent Effects
UV Sensitive
Glow in the Dark
High DefinitionFine detail printing.
EmbroideryReproduction ofthe traditional textile embroidery, giving the thread look.
Metallic Sparkles
Micro Printed Holes
Bright and MattCombination of effects on the same motif.
USE
Materials with low fastness on colours that represent risk of sublimation, like for instance some sports fabrics.
High visibility and decoration, details or logo reproduction on several colours.
Metallic look.
Fashion or visibilityeffects.
Pearl look for several uses.
Discrete mark, visible with UV light. Possible solution for brands protection elements.
Phosphorescentfinishing to use on mixed environments with light and dark.
High resolution inreproducing photographic or half tones images.
Suitable for logos with many colours or light bases, where traditional embroidery is difficult to apply.
Decorative and fashion.
Ideal for bigger area prints that require breathable characteristics or aesthetics.
Different uses, allows to combine bright and matt effects on the same motif.
TRPHN
HELIOVR
TRPFLK
RTRHPL
RTRHPS
SUBLT
SUBSD
TRPHO
HELIOVRF
HELIOPLUS
19
-
QUALITY CERTIFICATIONS
20
-
QUALITY CERTIFICATIONS
21
* Our Heat-Transfers are tested to ensure high reliability on quality and performance according to the main textile standards.Results of tested norms are available upon demand.Interpretation:- Signed norms mean: tests were performed on those product qualities and submitted products comply with those norms.- Absence of sign mean: tests were not performed on those product qualities.- New tests and Norms can be at any time performed, meaning regular updates of this document are processed and available upon consult of dynamic presentations (Heat-Transfers Platform or website) or upon request.
Description
ISO 14184-1
ISO 105-B02
EN 71-3
EN 1122
EN 15777
ISO 15797
EN 14362-1
ISO 6330
ISO 105-E02
ISO 105-E03
EN ISO 20471
PVC FREE
EN 14704-1
EN ISO 11612
OEKO-TEXSTANDARD 100 - CLASS I
Textiles - Determination of formaldehyde.
Colour fastness to artificial light: xenon arc fading lamp test.
Safety of toys - Specification for migration of certain elements.
Plastics - Determination of cadmium. Wet composition method.
Textiles - Test method for phthalates.
Textiles - Industrial washing and finishing procedures for testing of workwear.
Textiles - Methods for determination of certain aromatic amines derived from azo colorants.
Textiles - Domestic washing and drying procedures for textile testing.
Colour fastness to sea water.
Colour fastness to chlorinated water (swimming pool water).
High visibility clothing.
HelioTransfers are certified as PVC free.
Determination of the elasticity of fabrics.
Protective clothing - Clothing to protect against heat and flame.
Testing for harmful substances to the human health, including babies and toddlersup to 3 years old, meeting the needed human-ecological requirements.
QualityISO
14184-1ISO
105-B02
Norms*EN
14362-1EN
1122ISO6330
EN15777
ISO15797
EN14704-1
ENISO
11612
ISO105-E02
ISO105-E03
EN 71-3 OEKO-TEXSTANDARD 100
EN ISO20471
HELIO SS
HELIO VR
HELIO CP
RTR
HELIO REF
HELIO VRF
HELIO PLUS
PVC FREE
Print with care
PVC free
HELIOTranfers by Helio
textil
S.A
.
-
22
-
23
Quality and Environment: Our commitment!
Implemented Quality management system provides framework tools to comply with all applicable statutory laws and regulations, as well as customers' requirements.We, therefore, also strive to reduce environmental pollution to the absolute minimum, using environmentally friendly raw-materials and reducing water consumption.These are commitments taken by our company and its products in order to prevent any risks to human health and environment.
Certifications: Our recognition!
Heliotextil is certified in accordance with ISO 9001, being thus a pioneer company in this business area to achieve this. Our Company is also certified by Oeko-Tex Standard 100 product class I. This means our products are tested for harmful substances, showing the results of the inspection that the products meet the human ecological standard requirements.Many other certifications are implemented and some represent unique products. Please consult our quality certifications shown ahead.
PVC Free: Our Environment!
Innovation: Our Inspiration!
Our own R&D workgroup manages specific projects that promote the research and development of better and innovative solutions on products and processes, being this aligned with company’s strategic objectives and considered as Our Inspiration or Driven Force.Our in-house testing labs and personnel training programs allows us to better focus on improving and developing new and innovative technologies, being critical factors to guarantee the best quality and performance of our products.
We continuously seek out for improving our organization and products with new and innovative solutions that contribute to ours and to customer’s business success.
We have implemented a PVC Free Certification. Our products are PVC Free based not only on the selection and development of “clean” raw materials as well on the highly controlled environment conditions within production facilities, guaranteeing no possible contaminations from outside sources. These detailed approach demonstrates our exigency to eliminate any potential risk of our products to contain PVC.
-
23
-
IGUAL CAPA
Shown images are for demonstration purposes only. Trademarks or logos belong to the respective holder.
-
HELIOTEXTILETIQUETAS E PASSAMANARIAS, S.A.Rua dos Combatentes do Ultramar - P.O.Box 4673701-914 S. João da Madeira - PORTUGALTel.: +351 256 201 100 - Fax: +351 256 832 [email protected] - www.heliotextil.com