Unlock a new family tradition!

ActivityKit

jabberwockykids.com

Before Santa can come to your house, his helpful elves need to get your gifts ready! Use this page to write your letter to Santa so he knows what to bring. Let him know if you’ve been naughty or nice this year, plus what you’re hoping to get.

Dear Santa,

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

________________________________________________________________________________________

From your friend, ___________________________________________

Unlock a new family tradition!

ActivityKit

jabberwockykids.com

Part of the magic of Santa’s key is that it is a bit different for every house. Below, draw out what the magic key to your house looks like.

Unlock a new family tradition!

ActivityKit

jabberwockykids.com

Find your way through this fun stocking maze!

Start

Finish

azcoloring.com

Unlock a new family tradition!

ActivityKit

jabberwockykids.com

ActivityKit

Cut the page along the dotted line. If you don’t have scissors, fold

back and forth across the dotted line multiple times and carefully

tear the page apart. Use the green square to complete the origami

Christmas pine tree.

Unlock a new family tradition!

ActivityKit

jabberwockykids.com

origami-fun.com

www.origami-fun.com

OrigamiPine Tree

1. Start with a square piece of paper, colored side up. Fold the paper in half, crease well and open, and then fold again in the other direction.

4. Fold toward cent er line and unfold.

10. Now you can adjustyour pine tree so it is even all the way around, and it stands up by itself!

2. Turn the paper over to the white side.Fold the paper in half, crease well and open, and then fold again in the other direction.Your creases should look like this.

3. Using the creases you have made, bring the top three corners of the model down to the bottom corner.Flatten model.

5. Using the crease you have just made, open and flatten this flap.

6. Repeat step 4 and 5 on the other three flaps of the model.

7. Now make sure there are equal flaps underneath the model and that the top flap

is showing full color, like this.

9. Fold each full -color flap backward underneath itself.

8. Fold whole model along this crease and unfold.

www.origami-fun.com

OrigamiPine Tree

1. Start with a square piece of paper, colored side up. Fold the paper in half, crease well and open, and then fold again in the other direction.

4. Fold toward cent er line and unfold.

10. Now you can adjustyour pine tree so it is even all the way around, and it stands up by itself!

2. Turn the paper over to the white side.Fold the paper in half, crease well and open, and then fold again in the other direction.Your creases should look like this.

3. Using the creases you have made, bring the top three corners of the model down to the bottom corner.Flatten model.

5. Using the crease you have just made, open and flatten this flap.

6. Repeat step 4 and 5 on the other three flaps of the model.

7. Now make sure there are equal flaps underneath the model and that the top flap

is showing full color, like this.

9. Fold each full -color flap backward underneath itself.

8. Fold whole model along this crease and unfold.

www.origami-fun.com

OrigamiPine Tree

1. Start with a square piece of paper, colored side up. Fold the paper in half, crease well and open, and then fold again in the other direction.

4. Fold toward cent er line and unfold.

10. Now you can adjustyour pine tree so it is even all the way around, and it stands up by itself!

2. Turn the paper over to the white side.Fold the paper in half, crease well and open, and then fold again in the other direction.Your creases should look like this.

3. Using the creases you have made, bring the top three corners of the model down to the bottom corner.Flatten model.

5. Using the crease you have just made, open and flatten this flap.

6. Repeat step 4 and 5 on the other three flaps of the model.

7. Now make sure there are equal flaps underneath the model and that the top flap

is showing full color, like this.

9. Fold each full -color flap backward underneath itself.

8. Fold whole model along this crease and unfold.

www.origami-fun.com

OrigamiPine Tree

1. Start with a square piece of paper, colored side up. Fold the paper in half, crease well and open, and then fold again in the other direction.

4. Fold toward cent er line and unfold.

10. Now you can adjustyour pine tree so it is even all the way around, and it stands up by itself!

2. Turn the paper over to the white side.Fold the paper in half, crease well and open, and then fold again in the other direction.Your creases should look like this.

3. Using the creases you have made, bring the top three corners of the model down to the bottom corner.Flatten model.

5. Using the crease you have just made, open and flatten this flap.

6. Repeat step 4 and 5 on the other three flaps of the model.

7. Now make sure there are equal flaps underneath the model and that the top flap

is showing full color, like this.

9. Fold each full -color flap backward underneath itself.

8. Fold whole model along this crease and unfold.

www.origami-fun.com

OrigamiPine Tree

1. Start with a square piece of paper, colored side up. Fold the paper in half, crease well and open, and then fold again in the other direction.

4. Fold toward cent er line and unfold.

10. Now you can adjustyour pine tree so it is even all the way around, and it stands up by itself!

2. Turn the paper over to the white side.Fold the paper in half, crease well and open, and then fold again in the other direction.Your creases should look like this.

3. Using the creases you have made, bring the top three corners of the model down to the bottom corner.Flatten model.

5. Using the crease you have just made, open and flatten this flap.

6. Repeat step 4 and 5 on the other three flaps of the model.

7. Now make sure there are equal flaps underneath the model and that the top flap

is showing full color, like this.

9. Fold each full -color flap backward underneath itself.

8. Fold whole model along this crease and unfold.

www.origami-fun.com

OrigamiPine Tree

1. Start with a square piece of paper, colored side up. Fold the paper in half, crease well and open, and then fold again in the other direction.

4. Fold toward cent er line and unfold.

10. Now you can adjustyour pine tree so it is even all the way around, and it stands up by itself!

2. Turn the paper over to the white side.Fold the paper in half, crease well and open, and then fold again in the other direction.Your creases should look like this.

3. Using the creases you have made, bring the top three corners of the model down to the bottom corner.Flatten model.

5. Using the crease you have just made, open and flatten this flap.

6. Repeat step 4 and 5 on the other three flaps of the model.

7. Now make sure there are equal flaps underneath the model and that the top flap

is showing full color, like this.

9. Fold each full -color flap backward underneath itself.

8. Fold whole model along this crease and unfold.

www.origami-fun.com

OrigamiPine Tree

1. Start with a square piece of paper, colored side up. Fold the paper in half, crease well and open, and then fold again in the other direction.

4. Fold toward cent er line and unfold.

10. Now you can adjustyour pine tree so it is even all the way around, and it stands up by itself!

2. Turn the paper over to the white side.Fold the paper in half, crease well and open, and then fold again in the other direction.Your creases should look like this.

3. Using the creases you have made, bring the top three corners of the model down to the bottom corner.Flatten model.

5. Using the crease you have just made, open and flatten this flap.

6. Repeat step 4 and 5 on the other three flaps of the model.

7. Now make sure there are equal flaps underneath the model and that the top flap

is showing full color, like this.

9. Fold each full -color flap backward underneath itself.

8. Fold whole model along this crease and unfold.

www.origami-fun.com

OrigamiPine Tree

1. Start with a square piece of paper, colored side up. Fold the paper in half, crease well and open, and then fold again in the other direction.

4. Fold toward cent er line and unfold.

10. Now you can adjustyour pine tree so it is even all the way around, and it stands up by itself!

2. Turn the paper over to the white side.Fold the paper in half, crease well and open, and then fold again in the other direction.Your creases should look like this.

3. Using the creases you have made, bring the top three corners of the model down to the bottom corner.Flatten model.

5. Using the crease you have just made, open and flatten this flap.

6. Repeat step 4 and 5 on the other three flaps of the model.

7. Now make sure there are equal flaps underneath the model and that the top flap

is showing full color, like this.

9. Fold each full -color flap backward underneath itself.

8. Fold whole model along this crease and unfold.

www.origami-fun.com

OrigamiPine Tree

1. Start with a square piece of paper, colored side up. Fold the paper in half, crease well and open, and then fold again in the other direction.

4. Fold toward cent er line and unfold.

10. Now you can adjustyour pine tree so it is even all the way around, and it stands up by itself!

2. Turn the paper over to the white side.Fold the paper in half, crease well and open, and then fold again in the other direction.Your creases should look like this.

3. Using the creases you have made, bring the top three corners of the model down to the bottom corner.Flatten model.

5. Using the crease you have just made, open and flatten this flap.

6. Repeat step 4 and 5 on the other three flaps of the model.

7. Now make sure there are equal flaps underneath the model and that the top flap

is showing full color, like this.

9. Fold each full -color flap backward underneath itself.

8. Fold whole model along this crease and unfold.

www.origami-fun.com

OrigamiPine Tree

1. Start with a square piece of paper, colored side up. Fold the paper in half, crease well and open, and then fold again in the other direction.

4. Fold toward cent er line and unfold.

10. Now you can adjustyour pine tree so it is even all the way around, and it stands up by itself!

2. Turn the paper over to the white side.Fold the paper in half, crease well and open, and then fold again in the other direction.Your creases should look like this.

3. Using the creases you have made, bring the top three corners of the model down to the bottom corner.Flatten model.

5. Using the crease you have just made, open and flatten this flap.

6. Repeat step 4 and 5 on the other three flaps of the model.

7. Now make sure there are equal flaps underneath the model and that the top flap

is showing full color, like this.

9. Fold each full -color flap backward underneath itself.

8. Fold whole model along this crease and unfold.