ctg qualifications & capabilities presentationms ppt.pdfctg-psi’s corporate missionturn-key...
TRANSCRIPT
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Website: www.CTGPowerSystems.com Email: [email protected]
CTG Qualifications & Capabilities
Presentation
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
CTG Power Systems International, Inc. and its Affiliate Companies
Under the CTG Power Systems International (CTG-PSI) trademark we can offer our clients a distinct and obviousCompetitive Advantage including In-house Engineering, Procurement, Project & Construction ManagementServices for energy projects through CTG Power Systems International Inc. and RTC Power Systems Inc. Simplystated, we do it better, faster, safer and with greater quality and less cost than any other of our fellow serviceproviders.
Not only do we perform these services in-house through CTG Power Solutions LLC (CTG-PSL) and various other CTGaffiliate companies but we can also provide custom diesel and gas engine reciprocating packages up to 10 MWsuitable for black-start, emergency power or base-load power operating on standard or renewable fuels. CTG-PSLalso provides integrated remote or central control solutions for optimum operation. For the last 19 years, TheCamelot Technologies Group International, Inc. has been a reliable and trusted global leader in the supply of new
surplus, used and refurbished natural gas and reciprocating power generation equipment.
2
Our Tampa Florida 26000 SF Facility
CTG’s Family Of Companies
We Are a Company Deep in Experience and Diversified in Dimension…………
CTG Power Systems International, Inc. (CTG-PSI) is our flagship and corporate parent company providing full service engineering, procurement, construction, project management, logistics support, commissioning and maintenance services (EPCM) for the design, installation and modification of conventional fossil fuel fired and biomass power plants.
CTG Power Solutions, LLC, is a subsidiary company of CTG-PSI premier packager and remanufacturer of new used and remanufactured power generation systems utilizing medium reciprocating engines as the prime mover.
RTC Power Systems, LLC is a subsidiary company of CTG-PSI providing engineering and EPC services for the design, installation and modification of most any renewable energy power project.
The Camelot Technologies Group International, Inc. is a subsidiary company of CTG-PSI and
remains a world leader in the sale of new, used and refurbished heavy gas and diesel fired/reciprocating power generation equipment.
Together…… The CTG Power Systems Internatonal Family of Companies Provides The Complete Enterprise Solution For EPCM Services and Power Generation Equipment.
INTRODUCTION
3
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
Where We Fit Best ………
CTG Power Systems International, Inc. (CTG-PSI) www.CTGPowerSystems.com is the
parent flagship company of CTG Power Solutions LLC and several other energy services’
subsidiaries mentioned in this presentation, where we enjoy substantial opportunities,
penetration and success in several primary markets:
1. Utility: Peaking, combined-cycle, baseload power generation for utilities (e.g., IOUS, Municipals, RECs, CO-OPS).
2. Industrial/Commercial: Baseload, cogeneration and standby power generation for industrial and large commercial installations (e.g., paper and pulp, refining, heavy manufacturing, mining, hospitals, academia, shopping malls, resorts).
3. Emerging Grid: Baseload generation for remote locations where small increments of additional high-reliability power is required (e.g., islands, military, developing countries).
4. Blackstart Applications: For Large turbine power plants.
5. Biomass, CHP and Waste-to-Energy Power Plants (Renewable Technology): Gasification to biogas, syngas, methane, Combined Heat & Power
4
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
CTG-PSI’s CORPORATE MISSION
TURN-KEY SOLUTIONSFrom Concept to Reality
Utilizing internal resources, CTG-PSI provides in-house full service project services, including:
• Preliminary and Detailed Engineering & Design
• Procurement
• Project Management and Control
• Construction Management
• Start-up and Commissioning
• Plant Operation and Training
• O&M Services
5
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
5
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
Complete Project Design & FlowCTG offers a full complement of turn-key services as the complete enterprise solution for independent, merchant and distributed powerdevelopers. We address each phase of the plant building process thoughtfully and strategically.
ENGINEERING EXCELLENCE
CTG relies on the experience and expertise
of the CTG Engineering International, Inc.
(CTG-E) team which uses the latest
technology software and systems to provide:
• Feasibility Studies• Preliminary and Detailed Engineering & Design• 3-D Modeling and Laser Scan• Project & Configuration Control• Licensed Engineers in all major disciplines• Construction Bid Packages• Construction Engineering & Start-up Support
6
CTG Engineering Inc. is a CTG Power Systems International Company
2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
• Engineering
• Responsibility Matrix
• Procurement and Materials Management
• Project Schedule
• Construction Management
• Start-up and Commissioning
• Plant Operation and Training
• O&M Services
7
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
FLAWLESS EXECUTION
CTG Power Systems International, Inc. provides the high measure of excellence on project & construction management required to bring each project from concept to completion. Our team has experience leading international power projects with responsibility including:
RENEWABLE ENERGY SOLUTIONSRTC Power Systems International, Inc. (RTC-PSI)
RTC-PSI is a CTG Power Systems International company touching on many facets of the renewables sector. RTC-PSIprovides an excellent solution set corresponding to the emerging need for the delivery of a wide diversity ofrenewable energy services in today’s changing environmental landscape. We market and implement a veryinnovative and cost-effective renewable technologies program for most energy demands, together with energyefficiency strategies that provide our customers with long-term, progressive and sustainable solutions focused onbiomass power.
Cogeneration and CHP Facilities Existing Plant Upgrades Plants Utilizing Process Steam and Boiler Technologies Gasification Technologies Fuels including rice hulls, chipped tires, MSW, bagasse Geothermal Projects
8
RTC Power Systems International, Inc. is a division of CTG Power Systems International, Inc.
2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
Features
Proven prime movers (over 60 years field
experience with certain engine
technology and electrical components)
High fuel efficiency and heat rate
Modular design
Remote operation and monitoring
Mobility
Benefits
High reliability
Low capital and operating cost
Quick start (2 sec), loading to 110%
Fast track installation
50,000 EMD units installed worldwide
Low life cycle cost
30,000+ hours duty cycle
Financing / Leasing Options available
DISTRIBUTED GENERATION
9
CTG Power Solutions LLC is a division of CTG Power Systems International, Inc.
2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
CTG-PSL will provide state-of-the-
art CONTROL SYSTEM monitoring
sensors, enhanced computer with
synchronization controls and
emissions systems, providing a best
of breed solution in both operation
and reliability as well as cost of
maintenance.
CTG-PSL offers a number of
packaging solutions including
weatherization and noise
abatement options.
10
Our Chacabuco Chile 10MW Installation
A CTG Power Systems International Company 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
• Diesel and Gas Reciprocating Engines
• Liquid and Gas Fired Combustion Turbines
• Biomass and Gasification Systems
• Complete Power Plants
POWER GENERATION EQUIPMENT SALESThe Camelot Technologies Group International, Inc.
Since 1995, CTG-I has been world leader in providing it’sclients with a reliable and cost effective supply of newsurplus, used and refurbished power generationequipment.
From small diesel generators and gas turbines to completepower plants, CTG provides clients with cost-effectivesolutions to meet the requirements of their projects.
Over $500MM USD purchased and sold by (CTG-I).
11
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
KEY PAST PERFORMANCE PROJECTS286MW CGT
BNYCP Facility US240MW CGT
Plant Venezuela60MW CGT
Plant Venezuela
50MW Diesel Plant Chile
34 MW Wind Plant
Big Springs TX.
225 MW CGT Plant
Trinidad & Tobago
International Experience * * * * * *
Mobilization/Demobilization * * * * * *
Assessing Power Needs * * * * * *
Providing Generator Equipment * * * * * *
Preparing Generator Sets * * * * * *
Hauling Generator Sets * * * * * *
Installing Generator Sets * * * * * *
Preventative Maintenance In process In process * * *
Service of Generator Sets N/A *
Fueling Operations * *
Distribution Systems * * *
Safety Plan * * * * * *
QC Plan * * * * * *
Program/Project/Construction Management * * * * * *
CTG-PSI PROJECT
EXPERIENCE
12
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
CTG PROJECT
EXPERIENCEPOWER PROJECT EXPERIENCECTG Power Systems
13
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
CTG PROJECT EXPERIENCE
RENEWABLE PROJECT EXPERIENCERTC Power Systems, LLC
RTC Engineers have amassed a great deal of technical experience providing design and construction support for many conventional and renewable energy projects.
RTC has the ability to determine the best-fit technology for optimizing the use of the client’s feedstock or bio-fuel. Whether it is for power generation or production of salable products, RTC will provide the safest and most economical facility solution for the client.
14
RTC Power Systems LLC 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
• MSW and Biomass Facilities
• Tire Pyrolysis Facilities
• Digester Gas and Low-Btu Fuel Applications
• Gasification Applications
Project Engineer
ResidentConstruction
Manager
SafetyCraft
SupervisorsProject
ControlsQuality Control
ProcurementProject
ControlsDiscipline
Leads
Team ProjectManager
ResidentEngineer
ElectricalCivil/StructuralMechanicalI & C
CostSchedule
CostSchedule
CivilStructuralMechanicalElectricalI & E
OUR PROJECT ORGANIZATION CHART
Start-up, Training,
Commissioning
Client
CTG PROJECT EXECUTION
Overview
15
CTG Power Systems International 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
16
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
CTG-PSI’s COMPETITIVE ADVANTAGE
Full service provider – EPCM (Engineering, Balance of plant equipment Procurement,
Construction and Project Management, Operating and Maintenance service);
In-house packaging of 500kW to 4MW reciprocating medium speed 50/60 Hz. power
packages;
Ability to work with most fuel sources (liquid, gas, biomass, MSW) and production
technologies (gasification, combustion and steam turbines, reciprocating engines, boilers);
Meet and exceed customer expectations; attention to safety, quality and engineering
detail.
Why Choose Our Team?
Our Team combines engineering, procurement, project & construction management and equipmentmanufacturing experience which enables us to provide seamless project execution and clientinterface. It’s all about trust, commitment and partnership. A better way to do business.
• Through the combination of our companies, our multi-disciplined team and affiliate companies provide the most comprehensive project services such as:o Power generation equipment manufacture and procurement o Engineering and detailed designo Field and Site services and constructiono Start-up and commissioningo Plant operation and maintenance services
• Attention to detail ( “getting it right the first time”)• The right size partner – customer focus• Design and construction experience• Global reach with local response
Our Advantage
17
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
Proposed Next Steps
18
Identify Project Goals & Objectives
Conduct or Review Feasibility Study
Formalize and Confirm Proposal
Devise Division of Responsibilities
Devise Acceptable Project Schedule
Execute Master Services Agreement
Project Award & Commencement
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]
Learn More about Our Family of
Global Energy Service Companies
Prepared To Meet Your Power Project Needs
[email protected] or Call Us at: 1.334-359-1700 USA
19
CTG Power Systems International, Inc. 2415 Moores Mill Road, Ste. 265-203 Auburn Alabama 36830
Tel: (334) 359-1700 / Fax: (334) 370-4030 Email: [email protected]