csiro verification services +61 (0)3 9545 2777 ... · production complies with the conformance...

13
CSIRO Verification Services Clayton, Victoria, Australia +61 (0)3 9545 2777 http://www.activfire.gov.au/ Certificate of Conformity Certificate num. Registration date Version Valid until Page 1 of 13 afp - 2801 26-Nov-2012 Number Issue date 30-Apr-2020 9 26-Apr-2019 Issued by David Whittaker Executive Officer – ActivFire Scheme © CSIRO Australia, 2019 This certificate remains the property of CSIRO and may be subject to amendment, suspension or withdrawal at any time. The validity and authenticity of this certificate can be verified by the certification register located at http://www.activfire.gov.au This certification is issued within the scope of CSIRO Verification Services – Rules governing ActivFire Scheme and is valid only for the product(s) as submitted for evaluation and verification of conformity, subject to the following conditions. Reference to details, limitations and requirements, where documented as a schedule/enclosure with this certificate. The Registrant is responsible for their attestation of conformity and ensuring that on-going production complies with the conformance criteria defined in this certificate. This certificate will not be valid if any changes or modifications are made to the product which have not been notified and validated by CSIRO Verification Services. This certificate is subject to periodical re-validation upon verification that all requirements, as determined by the conformity assessment body, continue to be satisfactorily met by the Registrant. This certificate may only be reproduced in its published form, without modification and inclusive of all schedules/enclosures. Any changes, errors or omissions, must be submitted in writing and if necessary or requested, substantiated with relevant evidence. Any representations, such as advertising or other marketing related activities or articles shall reflect the correct contents of this certificate and conform with all relevant trade practices .and consumer protection legislation and regulations. Any terms or conditions of use as applicable to content and documentation as published or accessed through web sites administered by the CSIRO Verification Services. Product designation Isotubi, Numepress, pressfitting System, stainless steel, pipe and fittings (Refer to the Schedule/enclosures for further specified details) Agent/distributor AusPress Systems 127 Corunna Avenue, MELROSE PARK, SA, AUSTRALIA, 5039 Registrant Isotubi, S.L. Costa i Deu, 87, SABADELL, BARCELONA, SPAIN, 08205 Producer Isotubi, S.L. Costa i Deu, 87, SABADELL, BARCELONA, SPAIN, 08205 Conformance criteria and evaluation The Isotubi, Numepress, pressfitting System, stainless steel, pipe and fittings has been evaluated and verified as conforming with the relevant requirements of the following criteria. 1. Australian Standard AS 4118.2.1-1995, 'Fire sprinkler systems - Piping - General' incl. Amdt 1 (22 June 2005). 2. Australian Standard AS 3688-2005, 'Water supply - Metallic fittings and end connectors' incl. Amdt 1 (4 October 2006). 3. Australian Standard AS 5200.053-2008, 'Plumbing and drainage products - Stainless steel pipes and tubes for pressure applications'. Limitations/conditions of conformance Limitations/conditions of conformance, where identified on this certificate, are derived from qualifications from evaluation(s) for conformity and/or other related technical documentation. All details with respect to design, assembly and installation instructions and restrictions should be checked against the producer's current technical manual/data sheets and the requirements of the Authority having Jurisdiction. (Limitations/conditions of conformance continue)

Upload: others

Post on 08-Jul-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

CSIRO Verification Services Clayton, Victoria, Australia

+61 (0)3 9545 2777 http://www.activfire.gov.au/

Certificate of Conformity Certificate num. Registration date Version Valid until

Page 1 of 13 afp - 2801 26-Nov-2012

Number Issue date 30-Apr-2020

9 26-Apr-2019

Issued by

David Whittaker Executive Officer – ActivFire Scheme

© CSIRO Australia, 2019

This certificate remains the property of CSIRO and may be subject to amendment, suspension or withdrawal at any time. The validity and authenticity of this certificate can be verified by the certification register located at http://www.activfire.gov.au

This certification is issued within the scope of CSIRO Verification Services – Rules governing ActivFire Scheme and is valid only for the product(s) as submitted for evaluation and verification of conformity, subject to the following conditions.

Reference to details, limitations and requirements, where documented as a schedule/enclosure with this certificate.

The Registrant is responsible for their attestation of conformity and ensuring that on-going production complies with the conformance criteria defined in this certificate.

This certificate will not be valid if any changes or modifications are made to the product which have not been notified and validated by CSIRO Verification Services.

This certificate is subject to periodical re-validation upon verification that all requirements, as determined by the conformity assessment body, continue to be satisfactorily met by the Registrant.

This certificate may only be reproduced in its published form, without modification and inclusive of all schedules/enclosures.

Any changes, errors or omissions, must be submitted in writing and if necessary or requested, substantiated with relevant evidence.

Any representations, such as advertising or other marketing related activities or articles shall reflect the correct contents of this certificate and conform with all relevant trade practices .and consumer protection legislation and regulations.

Any terms or conditions of use as applicable to content and documentation as published or accessed through web sites administered by the CSIRO Verification Services.

Product designation

Isotubi, Numepress, pressfitting System, stainless steel, pipe and fittings

(Refer to the Schedule/enclosures for further specified details)

Agent/distributor

AusPress Systems 127 Corunna Avenue, MELROSE PARK, SA, AUSTRALIA, 5039

Registrant

Isotubi, S.L. Costa i Deu, 87, SABADELL, BARCELONA, SPAIN, 08205

Producer

Isotubi, S.L. Costa i Deu, 87, SABADELL, BARCELONA, SPAIN, 08205

Conformance criteria and evaluation

The Isotubi, Numepress, pressfitting System, stainless steel, pipe and fittings has been evaluated and verified as conforming with the relevant requirements of the following criteria.

1. Australian Standard AS 4118.2.1-1995, 'Fire sprinkler systems - Piping - General' incl. Amdt 1 (22 June 2005).

2. Australian Standard AS 3688-2005, 'Water supply - Metallic fittings and end connectors' incl. Amdt 1 (4 October 2006).

3. Australian Standard AS 5200.053-2008, 'Plumbing and drainage products - Stainless steel pipes and tubes for pressure applications'.

Limitations/conditions of conformance

Limitations/conditions of conformance, where identified on this certificate, are derived from qualifications from evaluation(s) for conformity and/or other related technical documentation. All details with respect to design, assembly and installation instructions and restrictions should be checked against the producer's current technical manual/data sheets and the requirements of the Authority having Jurisdiction.

(Limitations/conditions of conformance continue)

Schedule to

Certificate of Conformity Certificate num. Registration date Version Valid until

Page 2 of 13 afp - 2801 26-Nov-2012

Number Issue date 30-Apr-2020

9 26-Apr-2019

Specified limitations/conditions, determined from the evaluation for conformity, include the following.

i. Fire sprinkler and hydrant equipment, system design and installation should be determined and verified in accordance with the performance and prescribed requirements of the regulations, standards and criteria as specified by the building code and authorities having jurisdiction. Due considerations include the occupancy fire loading, sprinkler/hydrant location, coverage, response, hydraulic characteristics and other specified requirements relevant to the conformance and effectiveness of the equipment and installed system.

ii. The dimensional and mechanical characteristics of this product must be verified against the design and installation requirements/standards of the specified system.

Technical specification The following details are a representative extract of the technical specification for the Isotubi, Numepress, pressfitting System, stainless steel, pipe and fittings and may be subject to change. Complete and current details should be determined from the designated producer’s technical manual/data sheets.

Trade brand: Isotubi Material: Stainless steel, AISI 316

Designation details

Pipe

Trade brand Model Description

Numepress i331602 Annealed 316 stainless steel, 6m x 1.0 x 15mm

Numepress i331604 Annealed 316 stainless steel, 6m x 1.2 x 22mm

Numepress i331605 Annealed 316 stainless steel, 6m x 1.2 x 28mm

Numepress i331606 Annealed 316 stainless steel, 6m x 1.5 x 35mm

Numepress i331607 Annealed 316 stainless steel, 6m x 1.5 x 42mm

Numepress i331608 Annealed 316 stainless steel, 6m x 1.5 x 54mm

Numepress i331609 Annealed 316 stainless steel, 6m x 1.6 x 76.1mm

Numepress i331610 Annealed 316 stainless steel, 6m x 2.0 x 88.9mm

Numepress i331611 Annealed 316 stainless steel, 6m x 2.0 x 108mm

Numepress i331614 Annealed 316 stainless steel, 6m x 2.0 x 168.3mm

Numepress IPS31615 Imperial, Annealed 316 stainless steel, 6m x 1/2"

Numepress IPS31620 Imperial, Annealed 316 stainless steel, 6m x 3/4"

Numepress IPS31625 Imperial, Annealed 316 stainless steel, 6m x 1"

Numepress IPS31640 Imperial, Annealed 316 stainless steel, 6m x 1 1/2"

Numepress IPS31650 Imperial, Annealed 316 stainless steel, 6m x 2"

Numepress 330402 Non Annealed 304 stainless steel, 6m x 1.0 x 15mm

Numepress 330404 Non Annealed 304 stainless steel, 6m x 1.2 x 22mm

Numepress 330405 Non Annealed 304 stainless steel, 6m x 1.2 x 28mm

Numepress 330406 Non Annealed 304 stainless steel, 6m x 1.5 x 35mm

Numepress 330407 Non Annealed 304 stainless steel, 6m x 1.5 x 42mm

Numepress 330408 Non Annealed 304 stainless steel, 6m x 1.5 x 54mm

Numepress 330409 Non Annealed 304 stainless steel, 6m x 1.6 x 76.1mm

Numepress 330410 Non Annealed 304 stainless steel, 6m x 2.0 x 88.9mm

Numepress 330411 Non Annealed 304 stainless steel, 6m x 2.0 x 108mm

Fittings

Trade brand Model Description

Numepress i32002 Press socket connection both ends, Coupling 15mm

Numepress i32004 Press socket connection both ends, Coupling 22mm

Schedule to

Certificate of Conformity Certificate num. Registration date Version Valid until

Page 3 of 13 afp - 2801 26-Nov-2012

Number Issue date 30-Apr-2020

9 26-Apr-2019

Fittings

Trade brand Model Description

Numepress i32005 Press socket connection both ends, Coupling 28mm

Numepress i32006 Press socket connection both ends, Coupling 35mm

Numepress i32007 Press socket connection both ends, Coupling 42mm

Numepress i32008 Press socket connection both ends, Coupling 54mm

Numepress i32009 Press socket connection both ends, Coupling 76.1mm

Numepress i32010 Press socket connection both ends, Coupling 88.9mm

Numepress i32011 Press socket connection both ends, Coupling 108mm

Numepress i32014 Press socket connection both ends, Coupling 168.3mm

Numepress i32102 Press socket connection both ends, Slip Coupling 15mm

Numepress i32104 Press socket connection both ends, Slip Coupling 22mm

Numepress i32105 Press socket connection both ends, Slip Coupling 28mm

Numepress i32106 Press socket connection both ends, Slip Coupling 35mm

Numepress i32107 Press socket connection both ends, Slip Coupling 42mm

Numepress i32108 Press socket connection both ends, Slip Coupling 54mm

Numepress i32109 Press socket connection both ends, Slip Coupling 76.1mm

Numepress i32110 Press socket connection both ends, Slip Coupling 88.9mm

Numepress i32111 Press socket connection both ends, Slip Coupling 108mm

Numepress i32305 One press socket, one tube end, Reducer M-F 22-15mm

Numepress i32307 One press socket, one tube end, Reducer M-F 28-15mm

Numepress i32309 One press socket, one tube end, Reducer M-F 28-22mm

Numepress i32310 One press socket, one tube end, Reducer M-F 35-15mm

Numepress i32312 One press socket, one tube end, Reducer M-F 35-22mm

Numepress i32313 One press socket, one tube end, Reducer M-F 35-28mm

Numepress i32314 One press socket, one tube end, Reducer M-F 42-15mm

Numepress i32316 One press socket, one tube end, Reducer M-F 42-22mm

Numepress i32317 One press socket, one tube end, Reducer M-F 42-28mm

Numepress i32318 One press socket, one tube end, Reducer M-F 42-35mm

Numepress i32319 One press socket, one tube end, Reducer M-F 54-15mm

Numepress i32321 One press socket, one tube end, Reducer M-F 54-22mm

Numepress i32322 One press socket, one tube end, Reducer M-F 54-28mm

Numepress i32323 One press socket, one tube end, Reducer M-F 54-35mm

Numepress i32324 One press socket, one tube end, Reducer M-F 54-42mm

Numepress i32331 One press socket, one tube end, Reducer M-F 76.1-54mm

Numepress i32338 One press socket, one tube end, Reducer M-F 88.9-54mm

Numepress i32339 One press socket, one tube end, Reducer M-F 88.9-76.1mm

Numepress i32345 One press socket, one tube end, Reducer M-F 108-54mm

Numepress i32346 One press socket, one tube end, Reducer M-F 108-76.1mm

Numepress i32348 One press socket, one tube end, Reducer M-F 108-88.9mm

Numepress i32378 One press socket, one tube end, Reducer M-F 168.3-88.9mm

Numepress i32379 One press socket, one tube end, Reducer M-F 168.3-108mm

Numepress i30102 Press socket connection both ends, 90º Bend F-F 15mm

Numepress i30104 Press socket connection both ends, 90º Bend F-F 22mm

Numepress i30105 Press socket connection both ends, 90º Bend F-F 28mm

Numepress i31106 Press socket connection both ends, 90º Bend F-F 35mm

Schedule to

Certificate of Conformity Certificate num. Registration date Version Valid until

Page 4 of 13 afp - 2801 26-Nov-2012

Number Issue date 30-Apr-2020

9 26-Apr-2019

Fittings

Trade brand Model Description

Numepress i31107 Press socket connection both ends, 90º Bend F-F 42mm

Numepress i31108 Press socket connection both ends, 90º Bend F-F 54mm

Numepress i31109 Press socket connection both ends, 90º Bend F-F 76.1mm

Numepress i31110 Press socket connection both ends, 90º Bend F-F 88.9mm

Numepress i31111 Press socket connection both ends, 90º Bend F-F 108mm

Numepress i31114 Press socket connection both ends, 90º Bend F-F 168.3mm

Numepress i30302 One press socket, one tube end, 90º Bend F-M 15mm

Numepress i30304 One press socket, one tube end, 90º Bend F-M 22mm

Numepress i30305 One press socket, one tube end, 90º Bend F-M 28mm

Numepress i33306 One press socket, one tube end, 90º Bend F-M 35mm

Numepress i33307 One press socket, one tube end, 90º Bend F-M 42mm

Numepress i33308 One press socket, one tube end, 90º Bend F-M 54mm

Numepress i33309 One press socket, one tube end, 90º Bend F-M 76.1mm

Numepress i33310 One press socket, one tube end, 90º Bend F-M 88.9mm

Numepress i33311 One press socket, one tube end, 90º Bend F-M 108mm

Numepress i33314 One press socket, one tube end, 90º Bend F-M 168.3mm

Numepress i30402 Tube connection both ends, 90º Bend M-M 15mm

Numepress i30404 Tube connection both ends, 90º Bend M-M 22mm

Numepress i30405 Tube connection both ends, 90º Bend M-M 28mm

Numepress i30406 Tube connection both ends, 90º Bend M-M 35mm

Numepress i30407 Tube connection both ends, 90º Bend M-M 42mm

Numepress i30408 Tube connection both ends, 90º Bend M-M 54mm

Numepress i30409 Tube connection both ends, 90º Bend M-M 76.1mm

Numepress i30410 Tube connection both ends, 90º Bend M-M 88.9mm

Numepress i30411 Tube connection both ends, 90º Bend M-M 108mm

Numepress i30862 Tube connection both ends, 75º Bend M-M 15mm

Numepress i30864 Tube connection both ends, 75º Bend M-M 22mm

Numepress i30865 Tube connection both ends, 75º Bend M-M 28mm

Numepress i30866 Tube connection both ends, 75º Bend M-M 35mm

Numepress i30867 Tube connection both ends, 75º Bend M-M 42mm

Numepress i30868 Tube connection both ends, 75º Bend M-M 54mm

Numepress i30869 Tube connection both ends, 75º Bend M-M 76.1mm

Numepress i30870 Tube connection both ends, 75º Bend M-M 88.9mm

Numepress i30871 Tube connection both ends, 75º Bend M-M 108mm

Numepress i30942 Tube connection both ends, 60º Bend M-M 15mm

Numepress i30944 Tube connection both ends, 60º Bend M-M 22mm

Numepress i30955 Tube connection both ends, 60º Bend M-M 28mm

Numepress i30956 Tube connection both ends, 60º Bend M-M 35mm

Numepress i30957 Tube connection both ends, 60º Bend M-M 42mm

Numepress i30958 Tube connection both ends, 60º Bend M-M 54mm

Numepress i30959 Tube connection both ends, 60º Bend M-M 76.1mm

Numepress i30960 Tube connection both ends, 60º Bend M-M 88.9mm

Numepress i30961 Tube connection both ends, 60º Bend M-M 108mm

Numepress i30602 Press socket connection both ends, 45º Bend F-F 15mm

Schedule to

Certificate of Conformity Certificate num. Registration date Version Valid until

Page 5 of 13 afp - 2801 26-Nov-2012

Number Issue date 30-Apr-2020

9 26-Apr-2019

Fittings

Trade brand Model Description

Numepress i30604 Press socket connection both ends, 45º Bend F-F 22mm

Numepress i30605 Press socket connection both ends, 45º Bend F-F 28mm

Numepress i32606 Press socket connection both ends, 45º Bend F-F 35mm

Numepress i32607 Press socket connection both ends, 45º Bend F-F 42mm

Numepress i32608 Press socket connection both ends, 45º Bend F-F 54mm

Numepress i32609 Press socket connection both ends, 45º Bend F-F 76.1mm

Numepress i32610 Press socket connection both ends, 45º Bend F-F 88.9mm

Numepress i32611 Press socket connection both ends, 45º Bend F-F 108mm

Numepress i32614 Press socket connection both ends, 45º Bend F-F 168.3mm

Numepress i30702 One press socket, one tube end, 45º Bend F-M 15mm

Numepress i30704 One press socket, one tube end, 45º Bend F-M 22mm

Numepress i30705 One press socket, one tube end, 45º Bend F-M 28mm

Numepress i32706 One press socket, one tube end, 45º Bend F-M 35mm

Numepress i32707 One press socket, one tube end, 45º Bend F-M 42mm

Numepress i32708 One press socket, one tube end, 45º Bend F-M 54mm

Numepress i32709 One press socket, one tube end, 45º Bend F-M 76.1mm

Numepress i32710 One press socket, one tube end, 45º Bend F-M 88.9mm

Numepress i32711 One press socket, one tube end, 45º Bend F-M 108mm

Numepress i32714 One press socket, one tube end, 45º Bend F-M 168.3mm

Numepress i30872 Tube connection both ends, 45º Bend M-M 15mm

Numepress i30874 Tube connection both ends, 45º Bend M-M 22mm

Numepress i30875 Tube connection both ends, 45º Bend M-M 28mm

Numepress i30876 Tube connection both ends, 45º Bend M-M 35mm

Numepress i30877 Tube connection both ends, 45º Bend M-M 42mm

Numepress i30878 Tube connection both ends, 45º Bend M-M 54mm

Numepress i30879 Tube connection both ends, 45º Bend M-M 76.1mm

Numepress i30880 Tube connection both ends, 45º Bend M-M 88.9mm

Numepress i30881 Tube connection both ends, 45º Bend M-M 108mm

Numepress i30932 Tube connection both ends, 30º Bend M-M 15mm

Numepress i30934 Tube connection both ends, 30º Bend M-M 22mm

Numepress i30935 Tube connection both ends, 30º Bend M-M 28mm

Numepress i30936 Tube connection both ends, 30º Bend M-M 35mm

Numepress i30937 Tube connection both ends, 30º Bend M-M 42mm

Numepress i30938 Tube connection both ends, 30º Bend M-M 54mm

Numepress i30939 Tube connection both ends, 30º Bend M-M 76.1mm

Numepress i30940 Tube connection both ends, 30º Bend M-M 88.9mm

Numepress i30941 Tube connection both ends, 30º Bend M-M 108mm

Numepress i30892 Tube connection both ends, 15º Bend M-M 15mm

Numepress i30894 Tube connection both ends, 15º Bend M-M 22mm

Numepress i30905 Tube connection both ends, 15º Bend M-M 28mm

Numepress i30906 Tube connection both ends, 15º Bend M-M 35mm

Numepress i30907 Tube connection both ends, 15º Bend M-M 42mm

Numepress i30908 Tube connection both ends, 15º Bend M-M 54mm

Numepress i30909 Tube connection both ends, 15º Bend M-M 76.1mm

Schedule to

Certificate of Conformity Certificate num. Registration date Version Valid until

Page 6 of 13 afp - 2801 26-Nov-2012

Number Issue date 30-Apr-2020

9 26-Apr-2019

Fittings

Trade brand Model Description

Numepress i30910 Tube connection both ends, 15º Bend M-M 88.9mm

Numepress i30911 Tube connection both ends, 15º Bend M-M 108mm

Numepress i31002 Press socket connection all ends, Tee Equal 15mm

Numepress i31004 Press socket connection all ends, Tee Equal 22mm

Numepress i31005 Press socket connection all ends, Tee Equal 28mm

Numepress i31006 Press socket connection all ends, Tee Equal 35mm

Numepress i31007 Press socket connection all ends, Tee Equal 42mm

Numepress i31008 Press socket connection all ends, Tee Equal 54mm

Numepress i31009 Press socket connection all ends, Tee Equal 76.1mm

Numepress i31010 Press socket connection all ends, Tee Equal 88.9mm

Numepress i31011 Press socket connection all ends, Tee Equal 108mm

Numepress i31014 Press socket connection all ends, Tee Equal 168.3mm

Numepress i31206 Press socket connection all ends, Tee Reduced 22-15-22mm

Numepress i31 20 Press socket connection all ends, Tee Reduced 28-15-28mm

Numepress i31211 Press socket connection all ends, Tee Reduced 28-22-28mm

Numepress i31212 Press socket connection all ends, Tee Reduced 35-15-35mm

Numepress i31214 Press socket connection all ends, Tee Reduced 35-22-35mm

Numepress i31215 Press socket connection all ends, Tee Reduced 35-28-35mm

Numepress i31216 Press socket connection all ends, Tee Reduced 42-15-42mm

Numepress i31218 Press socket connection all ends, Tee Reduced 42-22-42mm

Numepress i31219 Press socket connection all ends, Tee Reduced 42-28-42mm

Numepress i31220 Press socket connection all ends, Tee Reduced 42-35-42mm

Numepress i31221 Press socket connection all ends, Tee Reduced 54-15-54mm

Numepress i31223 Press socket connection all ends, Tee Reduced 54-22-54mm

Numepress i31224 Press socket connection all ends, Tee Reduced 54-28-54mm

Numepress i31225 Press socket connection all ends, Tee Reduced 54-35-54mm

Numepress i31226 Press socket connection all ends, Tee Reduced 54-42-54mm

Numepress i31229 Press socket connection all ends, Tee Reduced 76.1-22-76.1mm

Numepress i31230 Press socket connection all ends, Tee Reduced 76.1-28-76.1mm

Numepress i31231 Press socket connection all ends, Tee Reduced 76.1-35-76.1mm

Numepress i31232 Press socket connection all ends, Tee Reduced 76.1-42-76.1mm

Numepress i31233 Press socket connection all ends, Tee Reduced 76.1-54-76.1mm

Numepress i31236 Press socket connection all ends, Tee Reduced 88.9-22-88.9mm

Numepress i31237 Press socket connection all ends, Tee Reduced 88.9-28-88.9mm

Numepress i31238 Press socket connection all ends, Tee Reduced 88.9-35-88.9mm

Numepress i31239 Press socket connection all ends, Tee Reduced 88.9-42-88.9mm

Numepress i31240 Press socket connection all ends, Tee Reduced 88.9-54-88.9mm

Numepress i31241 Press socket connection all ends, Tee Reduced 88.9-76.1-88.9mm

Numepress i31244 Press socket connection all ends, Tee Reduced 108-22-108mm

Numepress i31245 Press socket connection all ends, Tee Reduced 108-28-108mm

Numepress i31246 Press socket connection all ends, Tee Reduced 108-35-108mm

Numepress i31247 Press socket connection all ends, Tee Reduced 108-42-108mm

Numepress i31248 Press socket connection all ends, Tee Reduced 108-54-108mm

Numepress i31249 Press socket connection all ends, Tee Reduced 108-76.1-108mm

Schedule to

Certificate of Conformity Certificate num. Registration date Version Valid until

Page 7 of 13 afp - 2801 26-Nov-2012

Number Issue date 30-Apr-2020

9 26-Apr-2019

Fittings

Trade brand Model Description

Numepress i31250 Press socket connection all ends, Tee Reduced 108-88.9-108mm

Numepress i31279 Press socket connection all ends, Tee Reduced 168.3-76.1-168.3mm

Numepress i31280 Press socket connection all ends, Tee Reduced 168.3-88.9-168.3mm

Numepress i31281 Press socket connection all ends, Tee Reduced 168.3-108-168.3mm

Numepress i31304 Press socket to BSP female thread, FI Tee F-BSP 15mm-1/2"

Numepress i31307 Press socket to BSP female thread, FI Tee F-BSP 22mm-1/2"

Numepress i31308 Press socket to BSP female thread, FI Tee F-BSP 22mm-3/4"

Numepress i31309 Press socket to BSP female thread, FI Tee F-BSP 28mm-1/2"

Numepress i31310 Press socket to BSP female thread, FI Tee F-BSP 28mm-3/4"

Numepress i31311 Press socket to BSP female thread, FI Tee F-BSP 28mm-1"

Numepress i31312 Press socket to BSP female thread, FI Tee F-BSP 35mm-1/2"

Numepress i31313 Press socket to BSP female thread, FI Tee F-BSP 35mm-3/4"

Numepress i31316 Press socket to BSP female thread, FI Tee F-BSP 42mm-1/2"

Numepress i31317 Press socket to BSP female thread, FI Tee F-BSP 42mm-3/4"

Numepress i31320 Press socket to BSP female thread, FI Tee F-BSP 54mm-1/2"

Numepress i31321 Press socket to BSP female thread, FI Tee F-BSP 54mm-3/4"

Numepress i31324 Press socket to BSP female thread, FI Tee F-BSP 54mm-2"

Numepress i31326 Press socket to BSP female thread, FI Tee F-BSP 76.1mm-3/4"

Numepress i31329 Press socket to BSP female thread, FI Tee F-BSP 76.1mm-2"

Numepress i31331 Press socket to BSP female thread, FI Tee F-BSP 88.9mm-3/4"

Numepress i31334 Press socket to BSP female thread, FI Tee F-BSP 88.9mm-2"

Numepress i31336 Press socket to BSP female thread, FI Tee F-BSP 108mm-3/4"

Numepress i31339 Press socket to BSP female thread, FI Tee F-BSP 108mm-2"

Numepress i31401 Press socket to BSP male thread, MI Tee F-BSP 15mm-3/8"

Numepress i31454 Press socket to BSP male thread, MI Tee F-BSP 15mm-1/2"

Numepress i31458 Press socket to BSP male thread, MI Tee F-BSP 22mm-3/4"

Numepress i31459 Press socket to BSP male thread, MI Tee F-BSP 22mm-1"

Numepress i31461 Press socket to BSP male thread, MI Tee F-BSP 28mm-1"

Numepress i31464 Press socket to BSP male thread, MI Tee F-BSP 35mm-1 1/4"

Numepress i35350 Press socket to BSP female thread, FI Union F-BSP 15mm-1/2"

Numepress i35357 Press socket to BSP female thread, FI Union F-BSP 15mm-3/4"

Numepress i35352 Press socket to BSP female thread, FI Union F-BSP 22mm-3/4"

Numepress i35359 Press socket to BSP female thread, FI Union F-BSP 22mm-1"

Numepress i35353 Press socket to BSP female thread, FI Union F-BSP 28mm-1"

Numepress i35354 Press socket to BSP female thread, FI Union F-BSP 35mm-1 1/4"

Numepress i35355 Press socket to BSP female thread, FI Union F-BSP 42mm-1 1/2"

Numepress i35356 Press socket to BSP female thread, FI Union F-BSP 54mm-2"

Numepress i35360 Press socket to BSP male thread, MI Union F-BSP 15-1/2"

Numepress i35361 Press socket to BSP male thread, MI Union F-BSP 15-3/4"

Numepress i35364 Press socket to BSP male thread, MI Union F-BSP 22-1/2"

Numepress i35365 Press socket to BSP male thread, MI Union F-BSP 22-3/4"

Numepress i35366 Press socket to BSP male thread, MI Union F-BSP 22-1"

Numepress i35367 Press socket to BSP male thread, MI Union F-BSP 28-1"

Numepress i35368 Press socket to BSP male thread, MI Union F-BSP 35 1 1/4"

Schedule to

Certificate of Conformity Certificate num. Registration date Version Valid until

Page 8 of 13 afp - 2801 26-Nov-2012

Number Issue date 30-Apr-2020

9 26-Apr-2019

Fittings

Trade brand Model Description

Numepress i35369 Press socket to BSP male thread, MI Union F-BSP 42-1 1/2"

Numepress i35370 Press socket to BSP male thread, MI Union F-BSP 54-2"

Numepress i33833 Press socket to BSP male thread, MI 90º Bend F-BSP 15mm-1/2"

Numepress i33835 Press socket to BSP male thread, MI 90º Bend F-BSP 22mm-3/4"

Numepress i33836 Press socket to BSP male thread, MI 90º Bend F-BSP 28mm-1"

Numepress i33837 Press socket to BSP male thread, MI 90º Bend F-BSP 35mm-1 1/4"

Numepress i33838 Press socket to BSP male thread, MI 90º Bend F-BSP 42mm-1 1/2"

Numepress i33839 Press socket to BSP male thread, MI 90º Bend F-BSP 54mm-2"

Numepress i33803 Press socket to BSP female thread, FI 90º Bend F-BSP 15mm-1/2"

Numepress i33805 Press socket to BSP female thread, FI 90º Bend F-BSP 22mm-3/4"

Numepress i33806 Press socket to BSP female thread, FI 90º Bend F-BSP 28mm-1"

Numepress i33807 Press socket to BSP female thread, FI 90º Bend F-BSP 35mm-1 1/4"

Numepress i33403 Press socket to BSP with wall plate - With no wall plate offset, FI 90º Bend-Wall F-BSP 15mm-1/2"

Numepress i33407 Press socket to BSP with wall plate - With no wall plate offset, FI 90º Bend-Wall F-BSP 22mm-3/4"

Numepress i33423 Press socket to BSP with wall plate - With extended wall plate offset, FI 90º Bend-Wall F-BSP 15mm-1/2"

Numepress i33427 Press socket to BSP with wall plate - With extended wall plate offset, FI 90º Bend-Wall F-BSP 22mm-3/4"

Numepress i33702A Press socket connection to flange, Adaptor Flange 15mm-ANSI 150

Numepress i33702E Press socket connection to flange, Adaptor Flange 15mm-Table E

Numepress i33704A Press socket connection to flange, Adaptor Flange 22mm-ANSI 150

Numepress i33704E Press socket connection to flange, Adaptor Flange 22mm-Table E

Numepress i33705A Press socket connection to flange, Adaptor Flange 28mm-ANSI 150

Numepress i33705E Press socket connection to flange, Adaptor Flange 28mm-Table E

Numepress i33706A Press socket connection to flange, Adaptor Flange 35mm-ANSI 150

Numepress i33706E Press socket connection to flange, Adaptor Flange 35mm-Table E

Numepress i33707A Press socket connection to flange, Adaptor Flange 42mm-ANSI 150

Numepress i33707E Press socket connection to flange, Adaptor Flange 42mm-Table E

Numepress i33708A Press socket connection to flange, Adaptor Flange 54mm-ANSI 150

Numepress i33708E Press socket connection to flange, Adaptor Flange 54mm-Table E

Numepress i33709A Press socket connection to flange, Adaptor Flange 76.1mm-ANSI 150

Numepress i33709E Press socket connection to flange, Adaptor Flange 76.1mm-Table E

Numepress i33709H Press socket connection to flange, Adaptor Flange 76.1mm-Table H

Numepress i33710A Press socket connection to flange, Adaptor Flange 88.9mm-ANSI 150

Numepress i33710E Press socket connection to flange, Adaptor Flange 88.9mm-Table E

Numepress i33710H Press socket connection to flange, Adaptor Flange 88.9mm-Table H

Numepress i33711A Press socket connection to flange, Adaptor Flange 108mm-ANSI 150

Numepress i33711D Press socket connection to flange, Adaptor Flange 108mm-Table D

Numepress i33711E Press socket connection to flange, Adaptor Flange 108mm-Table E

Numepress i33711H Press socket connection to flange, Adaptor Flange 108mm-Table H

Numepress i33714A Press socket connection to flange, Adaptor Flange 168.3mm-ANSI 150

Numepress i33714E Press socket connection to flange, Adaptor Flange 168.3mm-Table E

Numepress i33714H Press socket connection to flange, Adaptor Flange 168.3mm-Table H

Schedule to

Certificate of Conformity Certificate num. Registration date Version Valid until

Page 9 of 13 afp - 2801 26-Nov-2012

Number Issue date 30-Apr-2020

9 26-Apr-2019

Fittings

Trade brand Model Description

Numepress i33212 End cap with press socket, Cap 15mm

Numepress i33214 End cap with press socket, Cap 22mm

Numepress i33215 End cap with press socket, Cap 28mm

Numepress i33216 End cap with press socket, Cap 35mm

Numepress i33217 End cap with press socket, Cap 42mm

Numepress i33218 End cap with press socket, Cap 54mm

Numepress i33219 End cap with press socket, Cap 76.1mm

Numepress i33220 End cap with press socket, Cap 88.9mm

Numepress i33221 End cap with press socket, Cap 108mm

Numepress i37402 Press socket to roll groove, Roll Groove Adapt 15mm-1/2"

Numepress i37404 Press socket to roll groove, Roll Groove Adapt 22mm-3/4"

Numepress i37405 Press socket to roll groove, Roll Groove Adapt 28mm-1"

Numepress i37406 Press socket to roll groove, Roll Groove Adapt 35mm-1 1/4"

Numepress i37407 Press socket to roll groove, Roll Groove Adapt 42mm-1 1/2"

Numepress i37408 Press socket to roll groove, Roll Groove Adapt 54mm-2"

Numepress i37409 Press socket to roll groove, Roll Groove Adapt 76.1mm-3"

Numepress i37410 Press socket to roll groove, Roll Groove Adapt 88.9mm-3"

Numepress i37411 Press socket to roll groove, Roll Groove Adapt 108mm-3"

Numepress i37414 Press socket to roll groove, Roll Groove Adapt 168.3mm-3"

Numepress i31726 Press socket to BSP male thread, MI Adaptor F-BSP 15mm-3/8"

Numepress i31703 Press socket to BSP male thread, MI Adaptor F-BSP 15mm-1/2"

Numepress i31714 Press socket to BSP male thread, MI Adaptor F-BSP 15mm-3/4"

Numepress i31715 Press socket to BSP male thread, MI Adaptor F-BSP 22mm-1/2"

Numepress i31707 Press socket to BSP male thread, MI Adaptor F-BSP 22mm-3/4"

Numepress i31716 Press socket to BSP male thread, MI Adaptor F-BSP 22mm-1"

Numepress i31717 Press socket to BSP male thread, MI Adaptor F-BSP 28mm-3/4"

Numepress i31708 Press socket to BSP male thread, MI Adaptor F-BSP 28mm-1"

Numepress i31718 Press socket to BSP male thread, MI Adaptor F-BSP 28mm-1 1/4"

Numepress i31719 Press socket to BSP male thread, MI Adaptor F-BSP 35mm-1"

Numepress i31709 Press socket to BSP male thread, MI Adaptor F-BSP 35mm-1 1/4"

Numepress i31720 Press socket to BSP male thread, MI Adaptor F-BSP 35mm-1 1/2"

Numepress i31721 Press socket to BSP male thread, MI Adaptor F-BSP 42mm-1 1/4"

Numepress i31710 Press socket to BSP male thread, MI Adaptor F-BSP 42mm-1 1/2"

Numepress i31722 Press socket to BSP male thread, MI Adaptor F-BSP 54mm-1 1/2"

Numepress i31711 Press socket to BSP male thread, MI Adaptor F-BSP 54mm-2"

Numepress i31713 Press socket to BSP male thread, MI Adaptor F-BSP 76.1mm-2 1/2"

Numepress i31730 Press socket to BSP male thread, MI Adaptor F-BSP 76.1mm-3"

Numepress i31724 Press socket to BSP male thread, MI Adaptor F-BSP 88.9mm-3"

Numepress i31833 Press socket to NPT male thread, MI Adaptor F-NPT 15mm-1/2"

Numepress i31837 Press socket to NPT male thread, MI Adaptor F-NPT 22mm-3/4"

Numepress i31838 Press socket to NPT male thread, MI Adaptor F-NPT 28mm-1"

Numepress i31839 Press socket to NPT male thread, MI Adaptor F-NPT 35mm-1 1/4"

Numepress i31840 Press socket to NPT male thread, MI Adaptor F-NPT 42mm-1 1/2"

Numepress i31841 Press socket to NPT male thread, MI Adaptor F-NPT 54mm-2"

Schedule to

Certificate of Conformity Certificate num. Registration date Version Valid until

Page 10 of 13 afp - 2801 26-Nov-2012

Number Issue date 30-Apr-2020

9 26-Apr-2019

Fittings

Trade brand Model Description

Numepress i31802 Press socket to BSP female thread, FI Adaptor F-BSP 15mm-1/2"

Numepress i31823 Press socket to BSP female thread, FI Adaptor F-BSP 15mm-3/4"

Numepress i31805 Press socket to BSP female thread, FI Adaptor F-BSP 22mm-1/2"

Numepress i31806 Press socket to BSP female thread, FI Adaptor F-BSP 22mm-3/4"

Numepress i31824 Press socket to BSP female thread, FI Adaptor F-BSP 22mm-1"

Numepress i31807 Press socket to BSP female thread, FI Adaptor F-BSP 28mm-1/2"

Numepress i31819 Press socket to BSP female thread, FI Adaptor F-BSP 28mm-3/4"

Numepress i31809 Press socket to BSP female thread, FI Adaptor F-BSP 28mm-1"

Numepress i31825 Press socket to BSP female thread, FI Adaptor F-BSP 28mm-1 1/4"

Numepress i31820 Press socket to BSP female thread, FI Adaptor F-BSP 35mm-1"

Numepress i31811 Press socket to BSP female thread, FI Adaptor F-BSP 35mm-1 1/4"

Numepress i31826 Press socket to BSP female thread, FI Adaptor F-BSP 35mm-1 1/2"

Numepress i31821 Press socket to BSP female thread, FI Adaptor F-BSP 42mm-1 1/4"

Numepress i31814 Press socket to BSP female thread, FI Adaptor F-BSP 42mm-1 1/2"

Numepress i31822 Press socket to BSP female thread, FI Adaptor F-BSP 54mm-1 1/2"

Numepress i31818 Press socket to BSP female thread, FI Adaptor F-BSP 54mm-2"

Numepress i31932 Tube end to BSP male thread, MI Adaptor M-BSP 15mm-1/2"

Numepress i31936 Tube end to BSP male thread, MI Adaptor M-BSP 22mm-3/4"

Numepress i31937 Tube end to BSP male thread, MI Adaptor M-BSP 28mm-1"

Numepress i31938 Tube end to BSP male thread, MI Adaptor M-BSP 35mm-1 1/4"

Numepress i31939 Tube end to BSP male thread, MI Adaptor M-BSP 42mm-1 1/2"

Numepress i31940 Tube end to BSP male thread, MI Adaptor M-BSP 54mm-2"

Numepress i90932 Tube end to BSP female thread, FI Adaptor M-BSP 15mm-1/2"

Numepress i90935 Tube end to BSP female thread, FI Adaptor M-BSP 22mm-1/2"

Numepress i90936 Tube end to BSP female thread, FI Adaptor M-BSP 22mm-3/4"

Numepress IPS50715 Press Socket - Press Socket, IPS Coupling, 1/2"

Numepress IPS50720 Press Socket - Press Socket, IPS Coupling, 3/4"

Numepress IPS50725 Press Socket - Press Socket, IPS Coupling, 1"

Numepress IPS50740 Press Socket - Press Socket, IPS Coupling, 1 1/2"

Numepress IPS50750 Press Socket - Press Socket, IPS Coupling, 2"

Numepress IPS50815 Press Socket - Press Socket, IPS Slip Coupling, 1/2"

Numepress IPS50820 Press Socket - Press Socket, IPS Slip Coupling, 3/4"

Numepress IPS50825 Press Socket - Press Socket, IPS Slip Coupling, 1"

Numepress IPS50840 Press Socket - Press Socket, IPS Slip Coupling, 1 1/2"

Numepress IPS50850 Press Socket - Press Socket, IPS Slip Coupling, 2"

Numepress IPS58310 Tube End - Press Socket, IPS Reducer M-F, 3/4"-1/2"

Numepress IPS58311 Tube End - Press Socket, IPS Reducer M-F, 1"-1/2"

Numepress IPS58312 Tube End - Press Socket, IPS Reducer M-F, 1"-3/4"

Numepress IPS58316 Tube End - Press Socket, IPS Reducer M-F, 1 1/2"-1/2"

Numepress IPS58317 Tube End - Press Socket, IPS Reducer M-F, 1 1/2"-3/4"

Numepress IPS58318 Tube End - Press Socket, IPS Reducer M-F, 1 1/2"-1"

Numepress IPS58320 Tube End - Press Socket, IPS Reducer M-F, 2"-1/2"

Numepress IPS58321 Tube End - Press Socket, IPS Reducer M-F, 2"-3/4"

Numepress IPS58322 Tube End - Press Socket, IPS Reducer M-F, 2"-1"

Schedule to

Certificate of Conformity Certificate num. Registration date Version Valid until

Page 11 of 13 afp - 2801 26-Nov-2012

Number Issue date 30-Apr-2020

9 26-Apr-2019

Fittings

Trade brand Model Description

Numepress IPS58324 Tube End - Press Socket, IPS Reducer M-F, 2"-1 1/2"

Numepress IPS56815 Press Socket - Press Socket, IPS 90 Bend F-F, 1/2"-1/2"

Numepress IPS56820 Press Socket - Press Socket, IPS 90 Bend F-F, 3/4"-3/4"

Numepress IPS56825 Press Socket - Press Socket, IPS 90 Bend F-F, 1"-1"

Numepress IPS56840 Press Socket - Press Socket, IPS 90 Bend F-F, 1 1/2"-1 1/2"

Numepress IPS56850 Press Socket - Press Socket, IPS 90 Bend F-F, 2"-2"

Numepress IPS30315 Tube End - Press Socket, IPS 90 Bend M-F, 1/2"-1/2"

Numepress IPS30320 Tube End - Press Socket, IPS 90 Bend M-F, 3/4"-3/4"

Numepress IPS30325 Tube End - Press Socket, IPS 90 Bend M-F, 1"-1"

Numepress IPS30340 Tube End - Press Socket, IPS 90 Bend M-F, 1 1/2"-1 1/2"

Numepress IPS30350 Tube End - Press Socket, IPS 90 Bend M-F, 2"-2"

Numepress IPS57115 Press Socket - Press Socket, IPS 45 Bend F-F, 1/2"-1/2"

Numepress IPS57120 Press Socket - Press Socket, IPS 45 Bend F-F, 3/4"-3/4"

Numepress IPS57125 Press Socket - Press Socket, IPS 45 Bend F-F, 1"-1"

Numepress IPS57140 Press Socket - Press Socket, IPS 45 Bend F-F, 1 1/2"-1 1/2"

Numepress IPS57150 Press Socket - Press Socket, IPS 45 Bend F-F, 2"-2"

Numepress IPS30715 Tube End - Press Socket, IPS 45 Bend M-F, 1/2"-1/2"

Numepress IPS30720 Tube End - Press Socket, IPS 45 Bend M-F, 3/4"-3/4"

Numepress IPS30725 Tube End - Press Socket, IPS 45 Bend M-F, 1"-1"

Numepress IPS30740 Tube End - Press Socket, IPS 45 Bend M-F, 1 1/2"-1 1/2"

Numepress IPS30750 Tube End - Press Socket, IPS 45 Bend M-F, 2"-2"

Numepress IPS57215 Press Socket - Press Socket - Press Socket, IPS Tee Equal F-F-F, 1/2"-1/2"-1/2"

Numepress IPS57220 Press Socket - Press Socket - Press Socket, IPS Tee Equal F-F-F, 3/4"-3/4"-3/4"

Numepress IPS57225 Press Socket - Press Socket - Press Socket, IPS Tee Equal F-F-F, 1"-1"-1"

Numepress IPS57240 Press Socket - Press Socket - Press Socket, IPS Tee Equal F-F-F, 1 1/2"-1 1/2"-1 1/2"

Numepress IPS57250 Press Socket - Press Socket - Press Socket, IPS Tee Equal F-F-F, 2"-2"-2"

Numepress IPS57310 Press Socket - Press Socket - Press Socket, IPS Tee Reduced F-F-F, 3/4"-1/2"-3/4"

Numepress IPS57311 Press Socket - Press Socket - Press Socket, IPS Tee Reduced F-F-F, 1"-1/2"-1"

Numepress IPS57312 Press Socket - Press Socket - Press Socket, IPS Tee Reduced F-F-F, 1"-3/4"-1"

Numepress IPS57316 Press Socket - Press Socket - Press Socket, IPS Tee Reduced F-F-F, 1 1/2"-1/2"-1 1/2"

Numepress IPS57317 Press Socket - Press Socket - Press Socket, IPS Tee Reduced F-F-F, 1 1/2"-3/4"-1 1/2"

Numepress IPS57318 Press Socket - Press Socket - Press Socket, IPS Tee Reduced F-F-F, 1 1/2"-1"-1 1/2"

Numepress IPS57320 Press Socket - Press Socket - Press Socket, IPS Tee Reduced F-F-F, 2"-1 1/2"-2"

Numepress IPS57321 Press Socket - Press Socket - Press Socket, IPS Tee Reduced F-F-F, 2"-3/4"-2"

Numepress IPS57322 Press Socket - Press Socket - Press Socket, IPS Tee Reduced F-F-F, 2"-1"-2"

Numepress IPS57324 Press Socket - Press Socket - Press Socket, IPS Tee Reduced F-F-F, 2"-1 1/2"-2"

Numepress IPS57810 Press Socket - FI BSP - Press Socket, IPS FI Tee, 1/2"-1/2"-1/2"

Numepress IPS57811 Press Socket - FI BSP - Press Socket, IPS FI Tee, 1/2"-3/4"-1/2"

Numepress IPS57812 Press Socket - FI BSP - Press Socket, IPS FI Tee, 3/4"-1/2"-3/4"

Numepress IPS57813 Press Socket - FI BSP - Press Socket, IPS FI Tee, 3/4"-3/4"-3/4"

Numepress IPS57814 Press Socket - FI BSP - Press Socket, IPS FI Tee, 3/4"-1"-3/4"

Numepress IPS57815 Press Socket - FI BSP - Press Socket, IPS FI Tee, 1"-1/2"-1"

Numepress IPS57816 Press Socket - FI BSP - Press Socket, IPS FI Tee, 1"-3/4"-1"

Numepress IPS57824 Press Socket - FI BSP - Press Socket, IPS FI Tee, 1 1/2"-1/2"-1 1/2"

Schedule to

Certificate of Conformity Certificate num. Registration date Version Valid until

Page 12 of 13 afp - 2801 26-Nov-2012

Number Issue date 30-Apr-2020

9 26-Apr-2019

Fittings

Trade brand Model Description

Numepress IPS57825 Press Socket - FI BSP - Press Socket, IPS FI Tee, 1 1/2"-3/4"-1 1/2"

Numepress IPS57826 Press Socket - FI BSP - Press Socket, IPS FI Tee, 1 1/2"-1"-1 1/2"

Numepress IPS57828 Press Socket - FI BSP - Press Socket, IPS FI Tee, 1 1/2"-1 1/2"-1 1/2"

Numepress IPS57830 Press Socket - FI BSP - Press Socket, IPS FI Tee, 2"-1/2"-2"

Numepress IPS57831 Press Socket - FI BSP - Press Socket, IPS FI Tee, 2"-3/4"-2"

Numepress IPS57832 Press Socket - FI BSP - Press Socket, IPS FI Tee, 2"-1"-2"

Numepress IPS57835 Press Socket - FI BSP - Press Socket, IPS FI Tee, 2"-1 1/2"-2"

Numepress IPS33215 Press Socket, IPS End Cap, 1/2"

Numepress IPS33220 Press Socket, IPS End Cap, 3/4"

Numepress IPS33225 Press Socket, IPS End Cap, 1"

Numepress IPS33240 Press Socket, IPS End Cap, 1 1/2"

Numepress IPS33250 Press Socket, IPS End Cap, 2"

Numepress IPS57911 Press Socket - FI BSP, IPS FI Adaptor, 1/2"-3/4"

Numepress IPS57912 Press Socket - FI BSP, IPS FI Adaptor, 1/2"-1"

Numepress IPS57914 Press Socket - FI BSP, IPS FI Adaptor, 3/4"-3/4"

Numepress IPS57915 Press Socket - FI BSP, IPS FI Adaptor, 3/4"-1"

Numepress IPS57919 Press Socket - FI BSP, IPS FI Adaptor, 1"-1"

Numepress IPS57921 Press Socket - FI BSP, IPS FI Adaptor, 1"-1 1/2"

Numepress IPS57932 Press Socket - FI BSP, IPS FI Adaptor, 1 1/2" -1 1/2"

Numepress IPS57933 Press Socket - FI BSP, IPS FI Adaptor, 1 1/2"-2"

Numepress IPS57939 Press Socket - FI BSP, IPS FI Adaptor, 2"-1 1/2"

Numepress IPS57940 Press Socket - FI BSP, IPS FI Adaptor, 2"-2"

Numepress IPS57610 Press Socket - MI BSP, IPS MI Adaptor, 1/2"-1/2"

Numepress IPS57611 Press Socket - MI BSP, IPS MI Adaptor, 1/2"-3/4"

Numepress IPS57612 Press Socket - MI BSP, IPS MI Adaptor, 1/2"-1"

Numepress IPS57614 Press Socket - MI BSP, IPS MI Adaptor, 3/4"-3/4"

Numepress IPS57615 Press Socket - MI BSP, IPS MI Adaptor, 3/4"-1"

Numepress IPS57619 Press Socket - MI BSP, IPS MI Adaptor, 1"-1"

Numepress IPS57621 Press Socket - MI BSP, IPS MI Adaptor, 1"-1 1/2"

Numepress IPS57632 Press Socket - MI BSP, IPS MI Adaptor, 1 1/2"-1 1/2"

Numepress IPS57639 Press Socket - MI BSP, IPS MI Adaptor, 2"-1 1/2"

Numepress IPS57640 Press Socket - MI BSP, IPS MI Adaptor, 2"-2"

Numepress IPS57515A-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 1/2"-ANSI

Numepress IPS57520A-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 3/4"-ANSI

Numepress IPS57525A-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 1"-ANSI

Numepress IPS57540A-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 1 1/2"-ANSI

Numepress IPS57550A-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 2"-ANSI

Numepress IPS57515D-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 1/2"-Table D

Numepress IPS57520D-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 3/4"-Table D

Numepress IPS57525D-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 1"-Table D

Numepress IPS57540D-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 1 1/2"-Table D

Numepress IPS57550D-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 2"-Table D

Numepress IPS57515E-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 1/2" -Table E

Numepress IPS57520E-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 3/4"-Table E

Schedule to

Certificate of Conformity Certificate num. Registration date Version Valid until

Page 13 of 13 afp - 2801 26-Nov-2012

Number Issue date 30-Apr-2020

9 26-Apr-2019

Fittings

Trade brand Model Description

Numepress IPS57525E-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 1"-Table E

Numepress IPS57540E-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 1 1/2" -Table E

Numepress IPS57550E-FF Press Socket - Flat Face Flange, IPS Adaptor Flange-FF, 2"-Table E

Numepress IPS57515A-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 1/2"-ANSI

Numepress IPS57520A-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 3/4"-ANSI

Numepress IPS57525A-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 1"-ANSI

Numepress IPS57540A-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 1 1/2"-ANSI

Numepress IPS57550A-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 2"-ANSI

Numepress IPS57515D-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 1/2"-Table D

Numepress IPS57520D-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 3/4" -Table D

Numepress IPS57525D-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 1"-Table D

Numepress IPS57540D-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 1 1/2" -Table D

Numepress IPS57550D-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 2"-Table D

Numepress IPS57515E-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 1/2" -Table E

Numepress IPS57520E-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 3/4"-Table E

Numepress IPS57525E-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 1"-Table E

Numepress IPS57540E-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 1 1/2" -Table E

Numepress IPS57550E-RF Press Socket - Raised Face Flange, IPS Adaptor Flange-RF, 2"-Table E

Supplementary information

Schedule of relevant articles

The following schedule is an extract of articles significant and/or related as evidence of conformity.

Reference

Title / description Date issued

(or date validated) Source Ident. type Ident.

Certificate of Conformity

101594 (40133)

ATS 5200.053-2008 : Technical Specification for plumbing and drainage products - Stainless steel pipes and tubes for pressure applications (globalMark-CoC_101594-40133_i_2011-10-03.pdf)

29-Oct-2012

Global –Mark, NSW, AU

Certification Schedule

101594 Schedule1-RevA

ATS 5200.053-2008 : Technical Specification for plumbing and drainage products - Stainless steel pipes and tubes for pressure applications (globalMark-CS_101594-40133_i_2012-10-29.pdf)

29-Oct-2012

Certificate of Conformity

101594 (40133)

AS 3688-2005 : Water supply - Metallic fittings and end connectors - Including Amendment 1 (globalMark-CoC_101594-40134_i_2012-10-29.pdf)

29-Oct-2012

Certification Schedule

101594 Schedule2-RevA

ATS 5200.053-2008 : Technical Specification for plumbing and drainage products - Stainless steel pipes and tubes for pressure applications (globalMark-CS_101594-40134_i_2012-10-29.pdf)

29-Oct-2012

Certificate of Approval

101594 (40133)

ATS 5200.053-2008 : Technical Specification for plumbing and drainage products - Stainless steel pipes and tubes for pressure applications (globalMark-CA_101594-40133_i_2013-07-05.pdf)

5-Jul-2013

Report number HHI 2586

Testing & evaluation to AS 3688:2005 of Isotubi (Numepress) 304 stainless steel press-fit and pipework for drainage and pressure pipe application, Heated and cold water up to DN100.

30-May-2013

CSIRO Materials Science and Engineering, Hydraulics Plumbing Laboratory, AU

Product Catalogue

2009 Stainless steel tubes and fittings 2009 Isotubi, S.L, ES.