cs6/8 series
TRANSCRIPT
CS6/8 SERIESC L U T C H S H I F T P O W E R T A K E - O F F
Designed to work on Allison 1000 and 2000 Series automatics
and many other current manual transmissions, the CS6/8
Series power take-offs offer direct mount pump options and a
drag brake. Upgrading to a multi-disk clutch brake allows for
absolute shaft stoppage.
DESIGNED FOR VERSATILITY
KEY FEATURES• Transmission input gears: Fits most popular
automatic and manual transmissions• Muncie drag brake prevents shaft rotation in the
OFF mode
• Versatility for remote pump drives: Three remote mount output shafts in keyed and flange types
• Optional pulse generator: System Protection Device monitors PTO shaft speed
• Fits most popular pumps: SAE “A”, “B”, and “BB”; DIN 5462 direct mount pump options
• Available with integral solenoid for use with automatic transmissions
• Rotatable direct mount flanges allows pump to be positioned for maximum clearance
PTO TORQUE & HORSEPOWER RATINGSSPEEDRATIO
INTERMITTENTHP (KW) @ 1,000 RPM
INTERMITTENTTORQUE LBS.FT. (NM)
CONTINUOUSTORQUE LBS.FT. (NM)
03 57 (43) 300 (407) 210 (285)
04 57 (43) 300 (407) 210 (285)
05 57 (43) 300 (407) 210 (285)
06 57 (43) 300 (407) 210 (285)
07 57 (43) 300 (407) 210 (285)
09 52 (39) 275 (373) 193 (261)
12 52 (39) 275 (373) 193 (261)
14 52 (39) 275 (373) 193 (261)
Approximate Weights: 47–49 lbs. (21.3–22.2 Kg.)
TARGET MARKETS• Dump• Refuse• Snow and Ice
• Tow and Recovery• Utility
CS6 DIMENSIONS
3.3685.3
3.1379.4
3.1379.4
1.2531.8
4.22107.3
8.54217.0
7.30185.5
4.33110.0
4.04102.7
4.57116.0
2.2657.5
6.92175.8
CL MOUNTING FLANGE
1.1729.7
3.3384.6
1.3634.7
3.3685.3
1.2531.8
3.0878.2
3.98101.2
2.5765.4
4.57116.0
6.92175.8
6.25158.8
7.58192.5
SAE 8-BOLT MOUNTING PAD
CL MOUNTING FLANGE
D
C
B
AA
B
C
D
12345678
8 7 6 5 4 3 2 1
E
F
E
F
REV
CS8
S-XX
XXX-
X1BX
D00
3.3685.3
3.1379.4
3.1379.4
1.2531.8
4.22107.3
8.54217.0
7.30185.5
4.33110.0
4.04102.7
4.57116.0
2.2657.5
6.92175.8
CL MOUNTING FLANGE
CS8 DIMENSIONS
CS6S DIMENSIONS
4.80121.9
3.0276.7
3.9299.7
0.225.6
5.18131.6
0.4310.9
4.87123.7
OUTPUT OPTIONS
3.536 89.8
3.536 89.8
5.750 146
½ -13 UNC-2B4 PLCS½-13 UNC-2B
2 PLCS
2.0 50
4.0 102
0.9 22
SAE “B” 7⁄ 8 "-13TSPLINED SHAFT
5.750 146
3.536 89.8
3.536 89.8
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 101.6
7⁄ 8 " ROUND SHAFT W/ ¼" KEYWAY
4.749 120.6
3.535 89.8
2.374 60.3
4.113 104.5
3.535 89.8
½ -13 UNC-2B4 PLCS
.406 DIA THRU6 PLCS ON 4.75 DIA B.C.
3 ⁄ 8 -16 UNC-2B4 PLCS
2.16 55
3.25 83
0.4 10
SAE “B” 7⁄ 8 "-13T SPLINED SHAFT
2.815 71.5
1.625 41.3
60°
3/8-16 UNC-2B4 PLCS
1.4 35
2.63 66.8
0.4 11
¾" ROUND SHAFTW/ 3/16" KEYWAY
5.750 146
3.536 89.8
3.536 89.8
½-13 UNC-2B2 PLCS
½-13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 102
SAE “BB” 1"-15TSPLINED SHAFT
4.188 106.4
1.2 29
0.27 7
3.25 83
SAE “B” 7⁄ 8 "-13TSPLINED SHAFT
4.188 106.4
1.2 29
3.25 83
0.3 7
SAE “A” 5/8"-9TSPLINED SHAFT
5.750 146.1
½-13 UNC-2B2 PLCS1.2 31
0.4 10
4.0 101
SAE ”B” 7⁄ 8 "-13TSPLINED SHAFT
“K” OUTPUT - SAE “B” 2/4-BOLT“L” OUTPUT - SAE “B” 2/4-BOLT FLANGE
7⁄8" ROUND SHAFT W/ ¼" KEYWAY
“M” OUTPUT - SAE “A” 2/6-BOLT FLANGESAE “B” 7⁄8"-13T SPLINED SHAFT
“N” OUTPUT - 6-BOLT ROUND FLANGE¾" ROUND SHAFT W/ 3⁄16" KEYWAY
“Q” OUTPUT - SAE “A” 2-BOLT FLANGESAE “B” 7⁄8"-13T SPLINED SHAFT
“P” OUTPUT - SAE “B” 2/4-BOLT FLANGESAE “BB” 1"-15T SPLINED SHAFT
“R” OUTPUT - SAE “A” 2-BOLT FLANGESAE “A” 5⁄8"-9T SPLINED SHAFT
“S” OUTPUT - SAE “B” 2-BOLT
0.32 8.1ON 3.31 [84] DIA B.C.
60°
3.1 79
2.24 57
0.08 1.9
5.750 146.1
½ -13 UNC-2B2 PLCS
2.0 51
4.00 101.6
0.9 23
SAE “B” 7⁄8"-13TSPLINED SHAFT
5.750 146.1
2.0 51
4.00 101.6
0.9 23
SAE “BB” 1"-15TSPLINED SHAFT
2.5 63
1.25 31.7
5⁄16" KEYWAY
0.46 11.7ON 3.75 [95.3] DIA B.C.
80°
4.188 106.4
5⁄16 -18 UNC-2B2 PLCS
1.2 29
0.27 6.7
3.25 82.6
SAE “A” 5⁄8" SHAFTWITH 5/32" KEYWAY
2.626 66.7
2.626 66.7
1.122 28.5
1.9 49
0.25 6.4
2.75 69.9
SAE “B” "-13TSPLINED SHAFT
3.150 80
3.150 80
M12 X 1.754 PLCS
2.7 67
0.43 10.8
3.13 79.6
DIN 5462 36MM 8SPLSPLINED SHAFT
3.2 81
0.08 2.1
2.75 69.9
“2” OUTPUT - DIN 100 COMP FLANGE “6” OUTPUT - SAE “B” 2-BOLT SPECIAL
“7” OUTPUT - SAE “B” 2-BOLT SPECIAL FLANGESAE “BB” 1"-15T SHAFT
“B” OUTPUT - 1.25" RD SHAFT W/ 5⁄16" KEY
“C” OUTPUT - 1410 COMP FLANGE “F” OUTPUT - SAE “A” 2-BOLT
“G” OUTPUT - SPECIAL 4-BOLT DANA MOUNT FLANGESAE “B” 7⁄8-13T SPLINED SHAFT “I” OUTPUT - DIN 5462
0.32 8.1ON 3.31 [84] DIA B.C.
60°
3.1 79
2.24 57
0.08 1.9
5.750 146.1
½ -13 UNC-2B2 PLCS
2.0 51
4.00 101.6
0.9 23
SAE “B” 7⁄8"-13TSPLINED SHAFT
5.750 146.1
2.0 51
4.00 101.6
0.9 23
SAE “BB” 1"-15TSPLINED SHAFT
2.5 63
1.25 31.7
5⁄16" KEYWAY
0.46 11.7ON 3.75 [95.3] DIA B.C.
80°
4.188 106.4
5⁄16 -18 UNC-2B2 PLCS
1.2 29
0.27 6.7
3.25 82.6
SAE “A” 5⁄8" SHAFTWITH 5/32" KEYWAY
2.626 66.7
2.626 66.7
1.122 28.5
1.9 49
0.25 6.4
2.75 69.9
SAE “B” "-13TSPLINED SHAFT
3.150 80
3.150 80
M12 X 1.754 PLCS
2.7 67
0.43 10.8
3.13 79.6
DIN 5462 36MM 8SPLSPLINED SHAFT
3.2 81
0.08 2.1
2.75 69.9
“2” OUTPUT - DIN 100 COMP FLANGE “6” OUTPUT - SAE “B” 2-BOLT SPECIAL
“7” OUTPUT - SAE “B” 2-BOLT SPECIAL FLANGESAE “BB” 1"-15T SHAFT
“B” OUTPUT - 1.25" RD SHAFT W/ 5⁄16" KEY
“C” OUTPUT - 1410 COMP FLANGE “F” OUTPUT - SAE “A” 2-BOLT
“G” OUTPUT - SPECIAL 4-BOLT DANA MOUNT FLANGESAE “B” 7⁄8-13T SPLINED SHAFT “I” OUTPUT - DIN 5462
0.32 8.1ON 3.31 [84] DIA B.C.
60°
3.1 79
2.24 57
0.08 1.9
5.750 146.1
½ -13 UNC-2B2 PLCS
2.0 51
4.00 101.6
0.9 23
SAE “B” 7⁄8"-13TSPLINED SHAFT
5.750 146.1
2.0 51
4.00 101.6
0.9 23
SAE “BB” 1"-15TSPLINED SHAFT
2.5 63
1.25 31.7
5⁄16" KEYWAY
0.46 11.7ON 3.75 [95.3] DIA B.C.
80°
4.188 106.4
5⁄16 -18 UNC-2B2 PLCS
1.2 29
0.27 6.7
3.25 82.6
SAE “A” 5⁄8" SHAFTWITH 5/32" KEYWAY
2.626 66.7
2.626 66.7
1.122 28.5
1.9 49
0.25 6.4
2.75 69.9
SAE “B” "-13TSPLINED SHAFT
3.150 80
3.150 80
M12 X 1.754 PLCS
2.7 67
0.43 10.8
3.13 79.6
DIN 5462 36MM 8SPLSPLINED SHAFT
3.2 81
0.08 2.1
2.75 69.9
“2” OUTPUT - DIN 100 COMP FLANGE “6” OUTPUT - SAE “B” 2-BOLT SPECIAL
“7” OUTPUT - SAE “B” 2-BOLT SPECIAL FLANGESAE “BB” 1"-15T SHAFT
“B” OUTPUT - 1.25" RD SHAFT W/ 5⁄16" KEY
“C” OUTPUT - 1410 COMP FLANGE “F” OUTPUT - SAE “A” 2-BOLT
“G” OUTPUT - SPECIAL 4-BOLT DANA MOUNT FLANGESAE “B” 7⁄8-13T SPLINED SHAFT “I” OUTPUT - DIN 5462
“B” OUTPUT – 1.25" RD SHAFT W/ ⁵⁄₁₆" KEY
“C” OUTPUT – 1410 COMPANION FLANGE
“I” OUTPUT – DIN 5462
“K” OUTPUT – SAE “B” 2/4-BOLT
3.536 89.8
3.536 89.8
5.750 146
½ -13 UNC-2B4 PLCS½-13 UNC-2B
2 PLCS
2.0 50
4.0 102
0.9 22
SAE “B” 7⁄ 8 "-13TSPLINED SHAFT
5.750 146
3.536 89.8
3.536 89.8
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 101.6
7⁄ 8 " ROUND SHAFT W/ ¼" KEYWAY
4.749 120.6
3.535 89.8
2.374 60.3
4.113 104.5
3.535 89.8
½ -13 UNC-2B4 PLCS
.406 DIA THRU6 PLCS ON 4.75 DIA B.C.
3 ⁄ 8 -16 UNC-2B4 PLCS
2.16 55
3.25 83
0.4 10
SAE “B” 7⁄ 8 "-13T SPLINED SHAFT
2.815 71.5
1.625 41.3
60°
3/8-16 UNC-2B4 PLCS
1.4 35
2.63 66.8
0.4 11
¾" ROUND SHAFTW/ 3/16" KEYWAY
5.750 146
3.536 89.8
3.536 89.8
½-13 UNC-2B2 PLCS
½-13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 102
SAE “BB” 1"-15TSPLINED SHAFT
4.188 106.4
1.2 29
0.27 7
3.25 83
SAE “B” 7⁄ 8 "-13TSPLINED SHAFT
4.188 106.4
1.2 29
3.25 83
0.3 7
SAE “A” 5/8"-9TSPLINED SHAFT
5.750 146.1
½-13 UNC-2B2 PLCS1.2 31
0.4 10
4.0 101
SAE ”B” 7⁄ 8 "-13TSPLINED SHAFT
“K” OUTPUT - SAE “B” 2/4-BOLT“L” OUTPUT - SAE “B” 2/4-BOLT FLANGE
7⁄8" ROUND SHAFT W/ ¼" KEYWAY
“M” OUTPUT - SAE “A” 2/6-BOLT FLANGESAE “B” 7⁄8"-13T SPLINED SHAFT
“N” OUTPUT - 6-BOLT ROUND FLANGE¾" ROUND SHAFT W/ 3⁄16" KEYWAY
“Q” OUTPUT - SAE “A” 2-BOLT FLANGESAE “B” 7⁄8"-13T SPLINED SHAFT
“P” OUTPUT - SAE “B” 2/4-BOLT FLANGESAE “BB” 1"-15T SPLINED SHAFT
“R” OUTPUT - SAE “A” 2-BOLT FLANGESAE “A” 5⁄8"-9T SPLINED SHAFT
“S” OUTPUT - SAE “B” 2-BOLT
3.536 89.8
3.536 89.8
5.750 146
½ -13 UNC-2B4 PLCS½-13 UNC-2B
2 PLCS
2.0 50
4.0 102
0.9 22
SAE “B” 7⁄ 8 "-13TSPLINED SHAFT
5.750 146
3.536 89.8
3.536 89.8
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 101.6
7⁄ 8 " ROUND SHAFT W/ ¼" KEYWAY
4.749 120.6
3.535 89.8
2.374 60.3
4.113 104.5
3.535 89.8
½ -13 UNC-2B4 PLCS
.406 DIA THRU6 PLCS ON 4.75 DIA B.C.
3 ⁄ 8 -16 UNC-2B4 PLCS
2.16 55
3.25 83
0.4 10
SAE “B” 7⁄ 8 "-13T SPLINED SHAFT
2.815 71.5
1.625 41.3
60°
3/8-16 UNC-2B4 PLCS
1.4 35
2.63 66.8
0.4 11
¾" ROUND SHAFTW/ 3/16" KEYWAY
5.750 146
3.536 89.8
3.536 89.8
½-13 UNC-2B2 PLCS
½-13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 102
SAE “BB” 1"-15TSPLINED SHAFT
4.188 106.4
1.2 29
0.27 7
3.25 83
SAE “B” 7⁄ 8 "-13TSPLINED SHAFT
4.188 106.4
1.2 29
3.25 83
0.3 7
SAE “A” 5/8"-9TSPLINED SHAFT
5.750 146.1
½-13 UNC-2B2 PLCS1.2 31
0.4 10
4.0 101
SAE ”B” 7⁄ 8 "-13TSPLINED SHAFT
“K” OUTPUT - SAE “B” 2/4-BOLT“L” OUTPUT - SAE “B” 2/4-BOLT FLANGE
7⁄8" ROUND SHAFT W/ ¼" KEYWAY
“M” OUTPUT - SAE “A” 2/6-BOLT FLANGESAE “B” 7⁄8"-13T SPLINED SHAFT
“N” OUTPUT - 6-BOLT ROUND FLANGE¾" ROUND SHAFT W/ 3⁄16" KEYWAY
“Q” OUTPUT - SAE “A” 2-BOLT FLANGESAE “B” 7⁄8"-13T SPLINED SHAFT
“P” OUTPUT - SAE “B” 2/4-BOLT FLANGESAE “BB” 1"-15T SPLINED SHAFT
“R” OUTPUT - SAE “A” 2-BOLT FLANGESAE “A” 5⁄8"-9T SPLINED SHAFT
“S” OUTPUT - SAE “B” 2-BOLT
OUTPUT OPTIONS (CONT)
“P” OUTPUT – SAE “B” 2/4-BOLT FLANGESAE “BB” 1" - 15T SPLINED SHAFT
“Q” OUTPUT – SAE “A” 2-BOLT FLANGESAE “B” ⁷⁄₈" - 13T SPLINED SHAFT
“L” OUTPUT – SPECIAL (USED WITH LOW-BOX)
3.536 89.8
3.536 89.8
5.750 146
½ -13 UNC-2B4 PLCS½-13 UNC-2B
2 PLCS
2.0 50
4.0 102
0.9 22
SAE “B” 7⁄ 8 "-13TSPLINED SHAFT
5.750 146
3.536 89.8
3.536 89.8
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 101.6
7⁄ 8 " ROUND SHAFT W/ ¼" KEYWAY
4.749 120.6
3.535 89.8
2.374 60.3
4.113 104.5
3.535 89.8
½ -13 UNC-2B4 PLCS
.406 DIA THRU6 PLCS ON 4.75 DIA B.C.
3 ⁄ 8 -16 UNC-2B4 PLCS
2.16 55
3.25 83
0.4 10
SAE “B” 7⁄ 8 "-13T SPLINED SHAFT
2.815 71.5
1.625 41.3
60°
3/8-16 UNC-2B4 PLCS
1.4 35
2.63 66.8
0.4 11
¾" ROUND SHAFTW/ 3/16" KEYWAY
5.750 146
3.536 89.8
3.536 89.8
½-13 UNC-2B2 PLCS
½-13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 102
SAE “BB” 1"-15TSPLINED SHAFT
4.188 106.4
1.2 29
0.27 7
3.25 83
SAE “B” 7⁄ 8 "-13TSPLINED SHAFT
4.188 106.4
1.2 29
3.25 83
0.3 7
SAE “A” 5/8"-9TSPLINED SHAFT
5.750 146.1
½-13 UNC-2B2 PLCS1.2 31
0.4 10
4.0 101
SAE ”B” 7⁄ 8 "-13TSPLINED SHAFT
“K” OUTPUT - SAE “B” 2/4-BOLT“L” OUTPUT - SAE “B” 2/4-BOLT FLANGE
7⁄8" ROUND SHAFT W/ ¼" KEYWAY
“M” OUTPUT - SAE “A” 2/6-BOLT FLANGESAE “B” 7⁄8"-13T SPLINED SHAFT
“N” OUTPUT - 6-BOLT ROUND FLANGE¾" ROUND SHAFT W/ 3⁄16" KEYWAY
“Q” OUTPUT - SAE “A” 2-BOLT FLANGESAE “B” 7⁄8"-13T SPLINED SHAFT
“P” OUTPUT - SAE “B” 2/4-BOLT FLANGESAE “BB” 1"-15T SPLINED SHAFT
“R” OUTPUT - SAE “A” 2-BOLT FLANGESAE “A” 5⁄8"-9T SPLINED SHAFT
“S” OUTPUT - SAE “B” 2-BOLT “R” OUTPUT – SAE “A” 2-BOLT FLANGESAE “A” ⁵⁄₈" - 9T SPLINED SHAFT
5.750 [146.1]
½"-13 UNC-2B(2 PLC’s)
1.975 [50.2]
Ø4.629 [117.6]
SAE “B-B” 1"-15TSPLINED SHAFT
Ø4.012 [101.9]
0.386 [9.8]0.850 [21.6]
OUTPUT OPTIONS (CONT)
4.188 106.4
3⁄8-16 UNC-2B2 PLCS1.2 29
0.3 7
3.25 83
SAE “A” ¾"-11T SPLINED SHAFT
3.536 89.8
3.536 89.8
½-13 UNC-2B4 PLCS2.0 51
2.8 71
0.5 13
SAE “C” 1 ¼"-14TSPLINED SHAFT
2.6 65
1 ½" - 10TSTRAIGHT SPLINE SHAFT
5.770 146.6
3.540 89.9
3.540 89.9
½-13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.8 71
4.0 102
0.9 22
SAE “C” 1 ¼"-14TSPLINED SHAFT
“T” OUTPUT - SAE “A” 2-BOLT FLANGESAE “A” ¾"-11T SPLINED SHAFT
“V” OUTPUT - FOR MUNCIE EXTENDED SHAFT
“X” OUTPUT - 1 ½"-10T SHAFTFOR COMP FLANGE
“Z” OUTPUT - SAE “B” 2/4-BOLT FLANGESAE “C” 1 ¼"-14T SHAFT
0.32 8.1ON 3.31 [84] DIA B.C.
60°
3.1 79
2.24 57
0.08 1.9
5.750 146.1
½ -13 UNC-2B2 PLCS
2.0 51
4.00 101.6
0.9 23
SAE “B” 7⁄8"-13TSPLINED SHAFT
5.750 146.1
2.0 51
4.00 101.6
0.9 23
SAE “BB” 1"-15TSPLINED SHAFT
2.5 63
1.25 31.7
5⁄16" KEYWAY
0.46 11.7ON 3.75 [95.3] DIA B.C.
80°
4.188 106.4
5⁄16 -18 UNC-2B2 PLCS
1.2 29
0.27 6.7
3.25 82.6
SAE “A” 5⁄8" SHAFTWITH 5/32" KEYWAY
2.626 66.7
2.626 66.7
1.122 28.5
1.9 49
0.25 6.4
2.75 69.9
SAE “B” "-13TSPLINED SHAFT
3.150 80
3.150 80
M12 X 1.754 PLCS
2.7 67
0.43 10.8
3.13 79.6
DIN 5462 36MM 8SPLSPLINED SHAFT
3.2 81
0.08 2.1
2.75 69.9
“2” OUTPUT - DIN 100 COMP FLANGE “6” OUTPUT - SAE “B” 2-BOLT SPECIAL
“7” OUTPUT - SAE “B” 2-BOLT SPECIAL FLANGESAE “BB” 1"-15T SHAFT
“B” OUTPUT - 1.25" RD SHAFT W/ 5⁄16" KEY
“C” OUTPUT - 1410 COMP FLANGE “F” OUTPUT - SAE “A” 2-BOLT
“G” OUTPUT - SPECIAL 4-BOLT DANA MOUNT FLANGESAE “B” 7⁄8-13T SPLINED SHAFT “I” OUTPUT - DIN 5462
0.32 8.1ON 3.31 [84] DIA B.C.
60°
3.1 79
2.24 57
0.08 1.9
5.750 146.1
½ -13 UNC-2B2 PLCS
2.0 51
4.00 101.6
0.9 23
SAE “B” 7⁄8"-13TSPLINED SHAFT
5.750 146.1
2.0 51
4.00 101.6
0.9 23
SAE “BB” 1"-15TSPLINED SHAFT
2.5 63
1.25 31.7
5⁄16" KEYWAY
0.46 11.7ON 3.75 [95.3] DIA B.C.
80°
4.188 106.4
5⁄16 -18 UNC-2B2 PLCS
1.2 29
0.27 6.7
3.25 82.6
SAE “A” 5⁄8" SHAFTWITH 5/32" KEYWAY
2.626 66.7
2.626 66.7
1.122 28.5
1.9 49
0.25 6.4
2.75 69.9
SAE “B” "-13TSPLINED SHAFT
3.150 80
3.150 80
M12 X 1.754 PLCS
2.7 67
0.43 10.8
3.13 79.6
DIN 5462 36MM 8SPLSPLINED SHAFT
3.2 81
0.08 2.1
2.75 69.9
“2” OUTPUT - DIN 100 COMP FLANGE “6” OUTPUT - SAE “B” 2-BOLT SPECIAL
“7” OUTPUT - SAE “B” 2-BOLT SPECIAL FLANGESAE “BB” 1"-15T SHAFT
“B” OUTPUT - 1.25" RD SHAFT W/ 5⁄16" KEY
“C” OUTPUT - 1410 COMP FLANGE “F” OUTPUT - SAE “A” 2-BOLT
“G” OUTPUT - SPECIAL 4-BOLT DANA MOUNT FLANGESAE “B” 7⁄8-13T SPLINED SHAFT “I” OUTPUT - DIN 5462
“Z” OUTPUT – SAE “B” 2/4-BOLT FLANGESAE “C” 1¼" - 14T SHAFT
“6” OUTPUT – SAE “B” 2-BOLT SPECIAL
“2” OUTPUT – DIN 100 COMPANION FLANGE
3.536 89.8
3.536 89.8
5.750 146
½ -13 UNC-2B4 PLCS½-13 UNC-2B
2 PLCS
2.0 50
4.0 102
0.9 22
SAE “B” 7⁄ 8 "-13TSPLINED SHAFT
5.750 146
3.536 89.8
3.536 89.8
½ -13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 101.6
7⁄ 8 " ROUND SHAFT W/ ¼" KEYWAY
4.749 120.6
3.535 89.8
2.374 60.3
4.113 104.5
3.535 89.8
½ -13 UNC-2B4 PLCS
.406 DIA THRU6 PLCS ON 4.75 DIA B.C.
3 ⁄ 8 -16 UNC-2B4 PLCS
2.16 55
3.25 83
0.4 10
SAE “B” 7⁄ 8 "-13T SPLINED SHAFT
2.815 71.5
1.625 41.3
60°
3/8-16 UNC-2B4 PLCS
1.4 35
2.63 66.8
0.4 11
¾" ROUND SHAFTW/ 3/16" KEYWAY
5.750 146
3.536 89.8
3.536 89.8
½-13 UNC-2B2 PLCS
½-13 UNC-2B4 PLCS
2.0 51
0.9 22
4.0 102
SAE “BB” 1"-15TSPLINED SHAFT
4.188 106.4
1.2 29
0.27 7
3.25 83
SAE “B” 7⁄ 8 "-13TSPLINED SHAFT
4.188 106.4
1.2 29
3.25 83
0.3 7
SAE “A” 5/8"-9TSPLINED SHAFT
5.750 146.1
½-13 UNC-2B2 PLCS1.2 31
0.4 10
4.0 101
SAE ”B” 7⁄ 8 "-13TSPLINED SHAFT
“K” OUTPUT - SAE “B” 2/4-BOLT“L” OUTPUT - SAE “B” 2/4-BOLT FLANGE
7⁄8" ROUND SHAFT W/ ¼" KEYWAY
“M” OUTPUT - SAE “A” 2/6-BOLT FLANGESAE “B” 7⁄8"-13T SPLINED SHAFT
“N” OUTPUT - 6-BOLT ROUND FLANGE¾" ROUND SHAFT W/ 3⁄16" KEYWAY
“Q” OUTPUT - SAE “A” 2-BOLT FLANGESAE “B” 7⁄8"-13T SPLINED SHAFT
“P” OUTPUT - SAE “B” 2/4-BOLT FLANGESAE “BB” 1"-15T SPLINED SHAFT
“R” OUTPUT - SAE “A” 2-BOLT FLANGESAE “A” 5⁄8"-9T SPLINED SHAFT
“S” OUTPUT - SAE “B” 2-BOLT
4.188 106.4
3⁄8-16 UNC-2B2 PLCS1.2 29
0.3 7
3.25 83
SAE “A” ¾"-11T SPLINED SHAFT
3.536 89.8
3.536 89.8
½-13 UNC-2B4 PLCS2.0 51
2.8 71
0.5 13
SAE “C” 1 ¼"-14TSPLINED SHAFT
2.6 65
1 ½" - 10TSTRAIGHT SPLINE SHAFT
5.770 146.6
3.540 89.9
3.540 89.9
½-13 UNC-2B2 PLCS
½ -13 UNC-2B4 PLCS
2.8 71
4.0 102
0.9 22
SAE “C” 1 ¼"-14TSPLINED SHAFT
“T” OUTPUT - SAE “A” 2-BOLT FLANGESAE “A” ¾"-11T SPLINED SHAFT
“V” OUTPUT - FOR MUNCIE EXTENDED SHAFT
“X” OUTPUT - 1 ½"-10T SHAFTFOR COMP FLANGE
“Z” OUTPUT - SAE “B” 2/4-BOLT FLANGESAE “C” 1 ¼"-14T SHAFT
“T” OUTPUT – SAE “A” 2-BOLT FLANGESAE “A” ¾" - 11T SPLINED SHAFT
“S” OUTPUT – SAE “B” 2-BOLT
MODEL NUMBER CONSTRUCTION
Special FeaturesX – NoneC – Pulse Generator/Pressure Lube/SPD-1001DD – Pulse Generator & SPD-1001DP – Pressure LubeR – Pulse Generator/No Pressure Lube S – Pulse Generator/Pressure Lube2 – 2021 & Later Hino (S Shift Type Only)
CS 6S-M65 07-E 1 B X
Mountings6S – SAE 6-Bolt Std. Mtg.6D – SAE 6-Bolt Non-Std. Mtg.6N – SAE 6-Bolt Non-Std. Mtg. – Deep6B – SAE 6-Bolt Std. Mtg. – Metric6C – SAE 6-Bolt Non-Std. Mtg. – Metric8S – SAE 8-Bolt Std. Mtg.8B – SAE 8-Bolt Std. Mtg. – Metric8D – SAE 8-Bolt Non-Std. Mtg.8S – SAE 8-Bolt Non-Std. Mtg. – Metric
PTO TypesCS – Clutch Shift (Standard Drag Brake)CB – Clutch Shift (Optional Shaft Brake)
Transmission (Input Gear Options)I84 – AisinI85 – JATCOA67 – AllisonC61 – Clark/FullerC70 – Clark/FullerF10 – FullerF63 – FullerF66 – FullerF70 – FullerF86 – FullerM65 – MackM83 – MercedesS60 – SpicerS70 – SpicerS71 – SpicerU60 – UniversalS68 – UniversalU68 – Universal
Speed Ratios*03 – 0.33:104 – 0.44:105 – 0.47:106 – 0.56:107 – 0.70:109 – 0.87:112 – 1.15:114 – 1.44:1 (8-Bolt only)
Shifter TypesA – Manual AirE – Electric/Air 12 VF – Electric/Air 24 VH – Electric/Hyd. 12 V (Auto Trans Only)J – Electric/Hyd. 24 V (Auto Trans Only)P – Air Shift Less Activation ControlsS – 12 V Drop in SolenoidR – 24 V Drop in SolenoidU – Hyd. Shift Less Activation Controls2 – 12 V Elec/Hyd. GM 4500–6500 (2019 & Later) & International CV
Assembly Arrangements1 – Right Side Shaft Low2 – Right Side Shaft Low, Gear to Rear3 – Left Side Shaft Low4 – Left Side Shaft Low, Gear to Rear
Output TypesB – 1¼" Round Keyed ShaftC – 1410 Companion Flange I – DIN 5462K – SAE “B” 7∕8" -13T, SAE “B” 2- & 4-BoltL – Low-Box MountP – SAE “BB” 1" -15T, SAE “B” 2- & 4-BoltQ – SAE “A” 7∕8” -13T, SAE “A” 2-BoltR – SAE “A” 5∕8” -9T, SAE “A” 2-BoltS – SAE “B” 7∕8” -13T, SAE “B” 2-BoltT – ¾" -11T, SAE “A” 2-BoltZ – SAE 1¼" -14T, SAE “B” 2- & 4-Bolt2 – DIN 100 Companion Flange6 – SAE 7∕8” -13T, SAE “B” 2-Bolt
31
ARRANGEMENT
42
Note: *Not all combinations are available for input gear options. Refer to application catalog or service parts list for additional information.
201 East Jackson Street, Muncie, Indiana 47305800-367-7867 • Fax: 765-284-6991 • [email protected]
Specifications are subject to change without notice. Visit www.munciepower.com for warranties and literature. All rights reserved. © Muncie Power Products, Inc. (2015)
MP15-25 (Rev. 03-22)
A Member of the Interpump Group