crysteel truck equipment jim wyatt 1130 73rd ave ne ... · for 1 buyers 1492115 4.6" round led...

Vendor Name: Crysteel Truck EquipmentContact Person: Jim Wyatt Street Address: 1130 73rd Ave NEP.O. Box:City, State, Zip Fridley, MN 55432Phone #: 763-571-1902Toll Free #: 800-795-1280Fax #: 763-571-5091Email Address: [email protected]: www.crysteeltruck.com

Version of Excel used: Microsoft Excel 2010

5.0 DUMP BODYMake CrysteelWarranty 5 yearDate & I.D. of Price List 9/28/2017Discount to be applied to Price List 0%

Hoist OptionsUse this section to offer hoist options. Number these options starting with 5.1,5.2, etc., until you have listed all hoist options.Installation of dump body and/or hoist as well as options -complete install cost See PricingPrice of FMVSS 108 lighting package IncludedInstallation of FMVSS 108 lighting package- complete install cost IncludedPrice of ICC bumper under ride protection $96.56Installation of ICC bumper under ride protection- complete install cost $105.05

Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWEDDelivery Starting Point Address Lake Crystal, MN 56055Price per loaded mile for delivery $2.75Delivery Time Frame in calendar days ARO

Shop Rate per HourShop Rate for Mechanical work $75.00Body Shop Rate $75.00

*Note: The "Discount to be Applied to Price List" must be a numeric percentage. Not listing a numeric percentage may result in your bid being rejected.

mailto:[email protected]

http://www.crysteeltruck.com/


State of Minnesota Pricing Page

5.0 Dump Body

Make Crysteel E-Series Mild SteelFord and Chev Application 40" front, 60" cab to Axle9' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ tapered window, 7 gauge A1011 Floor12 gauge sides and 10 gauge frontPainted one fleet color (no base coat/clear coat)Under coated included

$5,253.51

Warranty 1year

Date & I.D. of Price sheet N/A

Discount, if any, to be applied to price sheet N/A

Crysteel hoist LB500 $1,417.24

Crysteel Electric / Hydraulic Double acting $506.91Power unit w/ in cab controls and cover over solenoid valve

Installation of dump body $675.52

Installation of hoist $599.40

Installation of hydraulic power unit $294.90mounted outside of frame rails driver side w/ control wired in cab

Crysteel Hy-Flo Twin Electric Power Unit-Faster Cycle Time PN 900-1729874 $1,952.38

For quick install $6.85

For Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80Deduct for 84"/93" ILO 87"/96" -$69.39For Base coat / clear coat for paint $448.25

Price



For 8'1" body ILO 9' deduct -$135.26For 3/16" AR450 floor ILO 7GA A1011 Floor $635.11For 1/4" AR450 Floor ILO 7GA A1011 Floor $802.12For LED STT $104.55For 10 gauge sides ILO 12 gauge $55.28For 7 gauge sides ILO 12 gauge $109.38For 7 gauge front and tailgate ILO of 10 gauge $182.30For delete tailgate & tailgate hardware -$176.42For boxed top rails $182.30For 52" front ILO 40" $124.67For one oval cutout in front corner posts facing rear $61.16For straight bulkhead ILO tapered $121.14For 9" long sills ILO 7" $121.14For I-Beam long sills ILO tubular long sills $61.16For Manual Pull Tarp Kit P/N 1645714 $559.00For 6" black poly side board kit installed P/N 1645689 $312.99Deduct for rigid sides ILO folding -$348.13For LED Marker Lights ILO Incandescent $64.69For Sliding Patch Gate (must have 20" high tailgate to fit patch gate) $264.63For Install light boxes supplier furnished $151.72For 20" sides & 24" tailgate REF P/N 1925373 $163.48Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash sw$2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included

Delivery Starting point Fridley, MN

Price per loaded mile for delivery $2.75



5.0 Dump Body

Make Crysteel E-Series Stainless SteelFord and Chev Application 40" front, 60" cab to AxleAll 201 Stainless Steel Construction9' long x 96" wide OD x 84" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ tapered window, 3/16 AR450 Floor12 gauge 201 SS Sides, 10 gauge SS Front & RearStainless steel finish-no paint included

Price $6,965.15

Warranty 1year










For Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab $450.65For 8'1" body ILO 9' body -$135.26For painting stainless steel body non-base coat paint color $1,726.26



For Base coat / clear coat for paint $438.61For LED STT $104.55For 10 SS gauge sides ILO 12 gauge SS sides $127.02For 7 gauge SS sides ILO 12 gauge SS sides $190.53For 7 gauge SS front and tailgate ILO 10 gauge SS $335.20For .190 aluminum sides ILO 10 gauge SS $1,293.74For delete tailgate & tailgate hardware -$176.42For 87"/96" ILO 84"/93" $176.42For 52" front ILO 40" $352.84For 3/16" AR450 floor ILO 7 gauge A1011 floor $751.55For 1/4" AR450 floor ILO 7 gauge A1011 floor $918.56For 7 gauge 201 SS floor ILO 7 gauge A1011 floor $1,429.00Deduct for rigid sides ILO folding -$348.13For LED Marker Lights ILO Incandescent $64.69For 9" long sills ILO 7" long sills $121.14For I-Beam Long sills ILO Tubular Long sills $242.28For one oval cutout in front corner posts facing rear $61.16For straight bulkhead ILO tapered $121.14For 6" black poly side board kit Installed P/N 1645689 $344.35For Manual Pull Tarp Kit Installed P/N 1645714 $559.00For Sliding Patch Gate (must have 20" Tailgate to fit patch gate) $382.24For Install light boxes supplier furnished $151.72Deduct for Alumna bright ILO wanding -$352.84Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel E-Series Mild SteelDodge Application 40" front, 60" cab to Axle9' 6" long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ Tapered Window, 7 gauge A1011 Floor10 gauge front and rear, 12 gauge sides A1011Painted one fleet color (no base coat/clear coat)Under coating included

Price $5,301.73

Warranty 1year













For 3/16" AR450 floor ILO 7 gauge A1011 floor $664.51For 1/4" AR450 Floor ILO 7 gauge A1011 floor $831.52For LED STT $104.55For 10 gauge sides ILO 12 gauge sides $58.81For 7 gauge sides ILO 12 gauge sides $115.26For 7 gauge front and tailgate ILO 10 gauge $182.30For delete tailgate & tailgate hardware -$176.42For 52" front ILO 40" $124.67Deduct for rigid sides ILO folding -$463.40For LED Marker Lights ILO Incandescent $64.69For Boxed top rails $182.30For 9" long sills ILO 7" $121.14For I-Beam long sills ILO tubular long sills $242.28For one oval cutout in front corner posts facing rear $61.16For straight bulkhead ILO tapered $121.14For 6" black poly side board kit Installed P/N 1645690 $344.35For Manual Pull Tarp Kit Installed P/N 1645714 $559.00For Sliding Patch Gate (must have 20" Tailgate to fit patch gate) $264.63For Install light boxes supplier furnished at factory $151.72Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel E-Series Stainless SteelDodge Application 40" front, 60" cab to AxleAll 201 Stainless Steel Construction9' 6"' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ tapered window, 7 gauge A1011 steel Floor12 gauge 201 SS Sides, 10 gauge SS Front & RearStainless steel finish-no paint included Under coating included

Price $7,047.48

Warranty 1year










For Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80Deduct for 87"/96" ILO 84"/93" -$176.42



For painting stainless steel body non-base coat paint color $1,752.65For Base coat / clear coat for paint $438.61For LED STT $104.55For 10 SS gauge sides ILO 12 gauge SS sides $134.08For 7 gauge SS sides ILO 12 gauge SS sides $201.12For 7 gauge SS front and tailgate ILO 10 gauge SS $335.20For .190 aluminum sides ILO 12 gauge SS sides $1,293.74For delete tailgate & tailgate hardware -$176.42For 52" front ILO 40" $352.84For 3/16" AR450 floor ILO 7 gauge A1011 floor $751.55For 1/4" AR450 floor ILO 7 gauge A1011 floor $918.56For 7 gauge 201 SS floor ILO 7 gauge A1011 floor $1,429.00Deduct for frigid sides ILO folding -$348.13For LED Marker Lights ILO Incandescent $64.69For 9" long sills ILO 7" long sills $121.14For I-Beam Long sills ILO Tubular Long sills $242.28For one oval cutout in front corner posts facing rear $61.16For straight bulkhead ILO tapered $121.14For 6" black Poly Side Board Kit Installed P/N 1645689 $344.35For Manual Pull Tarp Kit Installed P/N 1645714 $559.00For Sliding Patch Gate (must have 20" Tailgate to fit patch gate) $382.24For Install light boxes supplier furnished at factory $151.72Deduct for Alumna bright ILO wanding -$352.84Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73For 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel E-Series Mild SteelFord & Chev Application 40" front, 84" cab to Axle11' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ window, 7 gauge A1011 Floor10 gauge front, rear & 12 gauge sidesPainted one fleet color (no base coat/clear coat)Under Coating included

$5,771.05

Warranty 1year










For Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80Deduct for 84"/93" ILO 87"/96" -$69.39For 20" sides & 24" tailgate P/N 1925373 $163.48

Price



For Base coat / clear coat for paint $554.19For 3/16" AR450 floor ILO 7 gauge A1011 floor $751.55For 1/4" AR450 Floor ILO 7 gauge A1011 floor $918.56For LED STT $104.55For 10 gauge sides ILO 12 gauge sides $55.28For 7 gauge sides ILO 12 gauge sides $109.38For 7 gauge front and tailgate ILO 10 gauge A1011 $182.30For delete tailgate & tailgate hardware -$176.42For 52" front ILO 40" $124.67Deduct for rigid sides ILO folding -$348.13For LED Marker Lights ILO Incandescent $64.69For Boxed top rails $182.30For 9" long sills ILO 7" long sills $121.14For I-Beam Long sills ILO Tubular Long sills $242.28For one oval cutout in front corner post facing rear $61.16For straight bulkhead ILO tapered $121.14For 6" black poly side board kit Installed P/N 1645691 $363.95For Manual Pull Tarp Kit Installed P/N 1645714 $559.00For Sliding Patch Gate (must have 20" Tailgate to fit patch gate) $264.63For Install light boxes supplier furnished at factory $151.72Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel E-Series Stainless SteelFord and Chev Application 40" front, 84" cab to AxleAll 201 Stainless Steel Construction11' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield, 7 gauge A1011 Floor12 gauge 201 SS Sides, 10 gauge SS Front & RearUnder coating includedStainless steel finish-no paint included

7,275.12$

Warranty 1year



Crysteel hoist LB510 1,584.25$







For Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For painting stainless steel body non-base coat paint color $2,002.60

Price



For Base coat / clear coat for paint $554.19For LED STT $104.55For 10 SS gauge sides ILO 12 gauge SS sides $154.33For 7 gauge SS sides ILO 12 gauge SS sides $232.87For 7 gauge SS front and tailgate ILO 10 gauge SS $317.56For .190 aluminum sides ILO 12 gauge SS sides $1,411.36For delete tailgate & tailgate hardware -$176.42For 52" front ILO 40" $352.84Deduct for rigid sides ILO folding -$476.46For 3/16" AR450 floor ILO 7 gauge A1011 floor $751.55For 1/4" AR450 floor ILO 7 gauge A1011 floor $918.56For 7 gauge 201 SS floor ILO 7 gauge A1011 floor $1,429.00For LED Marker Lights ILO Incandescent $64.69For 9" long sills ILO 7" long sills $121.14For I-Beam Long sills ILO Tubular Long sills $242.28For one oval cutout in front corner posts facing rear $61.16For straight bulkhead ILO tapered $121.14For 6" black poly side board kit installed P/N 1645691 $363.95For Manual Pull Tarp Kit Installed P/N 1645714 $559.00For Sliding Patch Gate (must have 20" Tailgate to fit patch gate) $382.24For Install light boxes supplier furnished at factory $151.72Deduct for Alumna bright ILO wanding -$352.84Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel E-Series Mild SteelDodge Application 40" front, 84" cab to Axle11' 6" long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ tapered window, 7 gauge A1011 Floor12 gauge sides and 10 gauge front and 10 gauge rearPainted one fleet color (no base coat/clear coat)Under coating included

Price $5,862.78

Warranty 1year













For 3/16" AR450 floor ILO 7 gauge A1011 floor $780.95For 1/4" AR450 Floor ILO 7 gauge A1011 floor $947.96For LED STT $104.55For 10 gauge sides ILO 12 gauge sides $70.57For 7 gauge sides ILO 12 gauge sides $139.96For 7 gauge front and tailgate ILO 10 gauge A1011 $182.30For delete tailgate & tailgate hardware -$176.42For 52" front ILO 40" $124.67Deduct for rigid sides ILO folding sides -$460.52For LED Marker Lights ILO Incandescent $64.69For Boxed top rails $182.30For 9" long sills ILO 7" long sills $121.14For I-Beam Long sills ILO Tubular Long sills $242.28For one oval cutout in front corner posts facing rear $61.16For straight bulkhead ILO tapered $121.14For 6" black poly side board kit Installed P/N 1645692 $399.24For Manual Pull Tarp Kit Installed P/N 1645716 $573.37For Sliding Patch Gate (must have 20" Tailgate to fit patch gate) $264.63For Install light boxes supplier furnished at factory $151.72Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0

Make Crysteel E-Series Stainless SteelDodge Application 40" front, 84" cab to AxleAll 201 Stainless Steel Construction11' 6"' long x 96" wide OD x 87" wide IDSide height 14"Tailgate height 20"Quick drop tailgate, Fold down sidesFold Down Side Stops, Boxed Top RailsDirt shedding top rail and corner post1/4 cab shield w/ window, 7 gauge A1011 steel floor12 gauge 201 SS Sides, 10 gauge SS Front & RearUnder coating includedStainless steel finish-no paint included

Price $7,359.80

Warranty 1year










For Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For painting stainless steel body non-base coat paint color $2,002.60

Dump Body



For Base coat / clear coat for paint $554.19For LED STT $104.55For 10 SS gauge sides ILO 12 gauge SS sides $162.31For 7 gauge SS sides ILO 12 gauge SS sides $243.46For 7 gauge SS front and tailgate ILO 10 gauge SS $317.56For .190 aluminum sides ILO 12 gauge SS sides $1,470.16For delete tailgate & tailgate hardware -$176.42For 52" front ILO 40" $352.84Deduct for rigid sides ILO folding sides -$476.46For 3/16" AR450 floor ILO 7 gauge A1011 floor $780.95For 1/4" AR450 Floor ILO 7 gauge A1011 floor $947.96For 7 gauge 201 SS floor ILO 7 gauge A1011 floor $1,723.03For LED Marker Lights ILO Incandescent $64.69For 9" long sills ILO 7" long sills $121.14For I-Beam Long sills ILO Tubular Long sills $242.28For one oval cutout in front corner post facing rear $61.16For straight bulkhead ILO tapered $121.14For 6" black poly side board kit Installed P/N 1645692 $399.24For Manual Pull Tarp Kit Installed P/N 1645716 $573.37For Sliding Patch Gate (must have 20" Tailgate to fit patch gate) $382.24For Install light boxes supplier furnished at factory $151.72Deduct for Alumna bright ILO wanding -$372.44Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included




5.0 Dump Body

Make Crysteel Deuce-Series Mild SteelFord and Chev Application 38" front, 84" cab to Axle9' long x 96" wide OD x 87" wide ID2 - 3 Yard capacitySide height 12"Tailgate height 18"Quick drop tailgate, passenger fold down sideDriver side and rear dump thru capableFold Down Side StopsDirt shedding top rail and corner post1/4 cab shield, 7 gauge A1011 Floor10 gauge front and 12 gauge sidesPainted one fleet color (no base coat/clear coat)Under coating includedIntegral Hoist, 2-way dump unload capabilityHoist mount & hingesHoist controls located outside cab/at front of body

Price $9,177.36

Warranty 5 years



Crysteel hoist Included

Crysteel Electric / Hydraulic Double acting IncludedPower unit w/ in cab controls and cover over solenoid valve

Installation of dump body $1,208.40

Installation of hoist Included

Installation of hydraulic power unit Includedmounted outside of frame rails driver side w/ control wired in cab

For Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For Base coat / clear coat for paint $448.25For 3/16" AR450 floor ILO 7 gauge A1011 floor $523.38For 1/4" AR450 Floor ILO 7 gauge A1011 floor $669.22For passenger side dump ILO driver's side $242.28For Light boxes in bulkhead installed at factory $151.72For LED Marker Lights ILO Incandescent $64.69



For delete tailgate & tailgate hardware -$176.42For one oval cutout in front corner posts facing rear $61.16For Box top rails $176.42For 48" front ILO 38" $124.67For 6" black poly side board kit Installed P/N 1645689 $389.11For Manual Pull Tarp Kit P/N 1645714 $711.25Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0

Make Crysteel Deuce-Series Stainless SteelFord and GM application 40" front, 60" CA9' long x 96" wide OD x 87" wide IDSide height 12"Tailgate height 18"Quick drop tailgate, driver side fold down sideFold Down Side StopsDirt shedding top rail and corner post1/4 cab shield, 7 gauge A1011 Floor10 gauge 201 SS front, 12 201 gauge SS sidesStainless steel finish-no paint includedUnder coating includedPassenger side dump thruIntegral Hoist, 2-way dump unload capabilityHoist mount & hingesHoist controls located outside cab/at front of body

Price $10,452.38

Warranty 5 years








For Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For painting SS body non-base coat paint color $1,752.65For Base coat / clear coat for paint $448.25

Dump Body



For 3/16" AR450 floor ILO 7 gauge A1011 floor $523.38For 1/4" AR450 Floor ILO 7 gauge A1011 floor $669.22For Light boxes in bulkhead installed at factory $151.72For LED marker lights ILO Incandescent $64.69For delete tailgate & tailgate hardware -$176.42For one oval cutout in front corner post facing rear $61.16For 6" black poly side board kit Installed 1645689 $389.11For Manual Pull Tarp Kit P/N 1645714 $711.25Deduct for DA finish ILO wanding -$310.37Deduct for Alumna bright ILO wanding -$372.44Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included




5.0 Dump Body

Make Crysteel Deuce-Series Mild SteelFord and Chev Application 38" front, 84" cab to Axle11' long x 96" wide OD x 87" wide ID2 - 3 Yard capacitySide height 10"Tailgate height 16"Quick drop tailgate, passenger side fold down sideDriver side and rear dump thru capableFold Down Side StopsDirt shedding top rail and corner post1/4 cab shield, 7 gauge A1011 Floor10 gauge front and 12 gauge sidesPainted one fleet color (no base coat/clear coat)Under coating includedIntegral Hoist, 2-way dump unload capabilityHoist mount & hingesHoist controls located outside cab/at front of body

Price $9,760.12

Warranty 5 years








For Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80Deduct for deleting painting for SS body non-base coat paint color -$1,827.16For Base coat / clear coat for paint $554.19For 3/16" AR450 floor ILO 7 gauge A1011 floor $621.00For 1/4" AR450 Floor ILO 7 gauge A1011 floor $762.13



For passenger side dump thru ILO driver side $242.28For straight bulkhead, less cabshield, ILO tapered integral cabshield $117.61For Light boxes in bulkhead installed at factory $147.02For LED marker lights ILO Incandescent $62.33For delete tailgate & tailgate hardware -$176.42For one oval cutout in front corner post facing rear $61.16For Box top rails $176.42For 48" front ILO 38" $58.81For 6" black poly side board kit Installed P/N 1645691 $440.08For Manual Pull Tarp Kit Installed P/N 1645714 $711.25Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included




5.0 Dump Body

Make Crysteel Deuce-Series Stainless SteelFord and Chev Application 38" front, 84" cab to Axle11' long x 96" wide OD x 87" wide ID2 - 3 Yard capacitySide height 12"Tailgate height 18"Quick drop tailgate, passenger side fold down sideDriver side and rear dump thru capableFold Down Side StopsDirt shedding top rail and corner post1/4 cab shield, 7 gauge A1011 Floor10 gauge 201 SS front and 12 gauge 201 SS sides10 gauge 201 SS rearStainless steel finish-no paint includedUnder coating includedIntegral Hoist, 2-way dump unload capabilityHoist mount & hingesHoist controls located outside cab/at front of body

Price $11,044.62

Warranty 5 years








For Whelen L21HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For painting SS body non-base coat paint color $2,002.60For Base coat / clear coat for paint $554.19For 3/16" AR450 floor ILO 7 gauge A1011 floor $621.00For 1/4" AR450 Floor ILO 7 gauge A1011 floor $817.41For Light boxes in bulkhead installed at factory $151.72



For LED marker lights ILO Incandescent $64.69For delete tailgate & tailgate hardware -$176.42For one oval cutout in corner post facing rear $61.16For 48" front ILO 38" $58.81For 6" black poly side board kit Installed P/N 1645689 $389.11For Manual Pull Tarp Kit Installed P/N 1645714 $711.25Deduct for DA finish ILO wanding -$310.37Deduct for Alumna bright ILO wanding -$372.44Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0

Make Crysteel Contractor 9' Mild Steel 60" cab to Axle9' long x 96" wide OD Cab shield priced separatelySide height 14"Tailgate height 20"Quick drop tailgate, Lever Action drop typeFold Down Side, 1" type latches Board Pockets Front and rearWindow Opening on Head board12 gauge sides, 10 gauge front7 gauge floorPainted one fleet color (no base coat/clear coat)Under coating included

Price $6,558.11

Warranty 5year










For Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80

Dump Body



For Whelen L21HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For 1/4" 10 gauge A1011 cabshield shipped loose $648.25For Base coat / clear coat for paint $448.25For 3/16" AR450 floor ILO 7 gauge A1011 floor $590.61For 1/4" AR450 floor ILO 7 gauge A1011 floor $737.17For LED STT $104.55For delete tailgate & tailgate hardware -$176.42For boxed top rails $182.30For one oval cutout in front corner post facing rear $61.16For I-Beam Long sills ILO Tubular Long sills $242.28For Manual Pull Tarp Kit Installed P/N 1644930 $688.37For 6" black poly side board kit installed P/N 1645689 $312.99For LED Marker Lights ILO Incandescent $64.69For Sliding Patch Gate (must have 20" high tailgate to fit patch gate) $264.63For Install light boxes supplier furnished at factory $151.72Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel Contractor 9' 6" Mild Steel 60" cab to Axle9'6" long x 96" wide OD Cab shield priced separatelySide height 14"Tailgate height 20"Quick drop tailgate, Lever Action drop typeFold Down Side, 1" type latches Board Pockets Front and rearWindow Opening on Head board12 gauge sides, 10 gauge front7 gauge floor and tailgatePainted one fleet color (no base coat/clear coat)Under coating included

Price $6,675.45

Warranty 5 year













For Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For 1/4" 10 gauge A1011 cabshield shipped loose $648.25For Base coat / clear coat for paint $448.25For 3/16" AR450 floor ILO 7 gauge A1011 floor $590.61For 1/4" AR450 Floor ILO 7 gauge A1011 floor $737.17For LED STT $104.55For delete tailgate & tailgate hardware -$176.42For boxed top rails $182.30For one oval cutout in corner post facing rear $61.16For I-Beam Long sills ILO Tubular Long sills $242.28For Manual Pull Tarp Kit Installed P/N 1644930 $688.37For 6" black poly side board kit Installed P/N 1645689 $312.99For LED Marker Lights ILO Incandescent $64.69For Sliding Patch Gate (must have 20" high tailgate to fit patch gate) $264.63For Install light boxes supplier furnished at factory $151.72Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel Contractor 11' Mild Steel84" cab to Axle11' long x 96" wide OD Cab shield priced separatelySide height 14"Tailgate height 20"Quick drop tailgate, Lever Action drop typeFold Down Side, 1" type latches Board Pockets Front and rearWindow Opening on Head board12 gauge sides, 10 gauge front7 gauge floor and tailgatePainted one fleet color (no base coat/clear coat)Under coating included

Price $7,347.34

Warranty 5year













For Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For 1/4 10 gauge A1011 cabshield shipped loose $648.25For Base coat / clear coat for paint $554.19For 3/16" AR450 floor ILO 7 gauge A1011 floor $628.25For 1/4" AR450 Floor ILO 7 gauge A1011 floor $774.81For LED STT $104.55For delete tailgate & tailgate hardware -$176.42For boxed top rails $182.30For one oval cutout in corner post facing rear $61.16For I-Beam Long sills ILO Tubular Long sills $242.28For Manual Pull tarp Kit Installed P/N 1644930 $688.37For 6" black poly side board kit Installed P/N 1645689 $312.99For LED Marker Lights ILO Incandescent $64.69For Sliding Patch Gate (must have 20" high tailgate to fit patch gate) $264.63For Install light boxes supplier furnished at factory $151.72Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Crysteel Contractor 11' 6" Mild Steel84" cab to Axle11 6"' long x 96" wide OD Cab shield priced separatelySide height 14"Tailgate height 20"Quick drop tailgate, Lever Action drop typeFold Down Side, 1" type latches Board Pockets Front and rearWindow Opening on Head board12 gauge sides, 10 gauge front7 gauge floor and tailgatePainted one fleet color (no base coat/clear coat)Under coating included

Price $7,468.48

Warranty 5year













For Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For 1/4 10 gauge A1011 cabshield shipped loose $648.25For Base coat / clear coat for paint $554.19For 3/16" AR450 floor ILO 7 gauge A1011 floor $628.25For 1/4" AR450 Floor ILO 7 gauge A1011 floor $774.81For LED STT $104.55For delete tailgate & tailgate hardware -$176.42For Boxed top rails $182.30For one oval cutout in corner post facing rear $61.16For I-Beam Long sills ILO Tubular Long sills $242.28For Manual Pull Tarp Kit Installed P/N 1644930 $688.37For 6" black poly side board kit Installed P/N 1645689 $312.99For LED Marker Lights ILO Incandescent $64.69For Sliding Patch Gate (must have 20" high tailgate to fit patch gate) $264.63For Install light boxes supplier furnished at factory $151.72Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 6" Oval Light Boxes fitted for Stainless Steel E-Series Bulkhead PN 00002 $296.73For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0

Make Crysteel E-Series AluminumFord 40" front, 60" cab to Axle9'4" long x 96" wide OD x 87" wide IDSide height 16"Tailgate height 22"Rigid sides w/single panel reverse bindCrossmemberless understructureDirt shedding top rail and corner post8" long sills, 3/16" 6061-T6 aluminum floor1/4 cab shield w/ front V-braceManual tailgate releaseAluminum finish-no paint included

Price $6,468.72

Warranty 1year






Installation of hoist w/ steel long sills $903.90



For folding sides ILO rigid sides $835.05

For painting stainless steel body non-base coat paint color $1,752.65For Base coat / clear coat for paint $448.25For Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80

Dump Body



Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0

Make Crysteel E-Series AluminumFord 40" front, 84" cab to Axle11'4" long x 96" wide OD x 87" wide IDSide height 16"Tailgate height 22"Rigid sides w/single panel reverse bindCrossmemberless understructureDirt shedding top rail and corner post8" lonsills, 3/16" 6061-T6 aluminum floor1/4 cab shield w/ front V-braceManual tailgate releaseAluminum finish-no paint included

Price 7,350.82$

Warranty 1year






Installation of hoist w/steel long sills $903.90



For folding sides ILO rigid sides $835.05

For painting stainless steel body non-base coat paint color $2,002.60For Base coat / clear coat for paint $554.19For Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80

Dump Body



Con Slip Liner Application-Per foot Floor only $185.00Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For 1 set ECCO 3510A Surface Mt Strobes $226.89For Poly Fenders 19.5 985-1901 $532.84For 1 Buyers 1492115 4.6" round LED flood light installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73Add for 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included



Vendor Name:Contact Person:Street Address:P.O. Box:City, State, ZipPhone #: 763-571-1902Toll Free #: 800-795-1280Fax #: 763-571-5091Email Address: [email protected]: www.crysteeltruck.com


5.0 DUMP BODYMake TafcoWarranty 5 yearsDate & I.D. of Price List 9/27/2017Discount to be applied to Price List 0%

Hoist OptionsUse this section to offer hoist options. Number these options starting with 5.1,5.2, etc., until you have listed all hoist options.Installation of dump body and/or hoist as well as options -complete install cost See PricingPrice of FMVSS 108 lighting package IncludedInstallation of FMVSS 108 lighting package- complete install cost IncludedPrice of ICC bumper under ride protection See PricingInstallation of ICC bumper under ride protection- complete install cost See Pricing

Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWEDDelivery Starting Point Address Blue Earth, MN 56013Price per loaded mile for delivery $2.75Delivery Time Frame in calendar days ARO


Crysteel Truck EquipmentJim Wyatt1130 73rd Ave NE

Fridley, MN 55432





5.0 Dump Body

Make Tafco Aluminum Dump Body w/ Aluminum floor 141-238 42" front, 60" cab to Axle9' 8" long x 96" wide OD Side height 12" - 3/16" Aluminum Tailgate height 23" - 3/16" AluminumQuick drop tailgate, rigid sidesNo Cross members6" Aluminum Long sills1 1/4" Aluminum plank floorFMVSS 108 lights42" Tapered Bulk head w/ windowAluminum finish-no paint

Price $5,863.31

Warranty 1 year






Installation of hoist with steel long sills added $903.90



For Cab Shield 12' PN 141-085 $282.37For 11'4" ILO 9'8" PN 141-239 $344.82For Tarp Kit 139-088 Installed $1,006.41For Paint aluminum body one standard color non-base coat $1,751.13For LB510 hoist for a 11'4" body $174.58For Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80



For Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For Base coat / clear coat for paint $448.25For LED STT P/N 139-077 $82.81For delete tailgate & tailgate hardware -$796.89For Con Slip Liner Application-Per foot Floor only $185.00For Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $868.53For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For ECCO 3510A Surface Mt Strobes Installed $150.76For Poly Fenders 19.5 985-1901 Installed $532.84For 1 Buyers 1492115 4.6" round LED flood light Installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73For 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Tafco Lite Aluminum Contractor Body w/ Aluminum floorPN 1142-570 40" front, 60" cab to Axle9' long x 94" wide OD x 90" wide IDSide height 16"Tailgate height 16"Quick drop tailgate, Fold down sidesFold Down Side StopsDirt shedding top rail and corner post6" Aluminum Long sills3" I-Beam 16" on center Aluminum cross membersFMVSS 108 lights40" Tapered Bulk head w/ windowAluminum finish-no paint

Price $4,160.93

Warranty 1 year






Installation of hoist with steel long sills $903.90



For 12' ILO 9' $828.11For 10' ILO 9' $228.07For 94" skirt $180.56For Paint aluminum body one standard color non-base coat $1,752.65



For LB510 hoist for a 12' body $174.58For Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For Base coat / clear coat for paint $448.25For LED STT P/N 139-077 $82.81For delete tailgate & tailgate hardware $796.89For Con Slip Liner Application-Per foot Floor only $185.00For Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For ECCO 3510A Surface Mt Strobes Installed $226.89For Poly Fenders 19.5 985-1901 Installed $532.84For 1 Buyers 1492115 4.6" round LED flood light Installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73For 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 Dump Body

Make Tafco Magnum Aluminum Contractor Body w/ Aluminum floorPN 139-06942" Std. tapered bulkhead w/punched window, 60" cab to Axle9' long x 94" wide OD x 90" wide IDSide height 14"Tailgate height 23"Quick drop tailgate, Fold down sidesFold Down Side StopsDirt shedding top rail and corner post6" Aluminum Long sills3" I-Beam 12" on center Aluminum cross membersFMVSS 108 lights1-1/4" aluminum extruded floor with a 6.85" aluminum extruded side railsAluminum finish-no paint

Price $6,631.69

Warranty 5 years






Installation of hoist with steel long sills $903.90



For 10' PN 140-218 ILO 9' $217.21For 11' PN 139-078 ILO 9' $617.69For 12' PN 140-211 ILO 9' $862.05For bulkhead stop light kit PN 139-077 $197.00For 12" cab shield PN 141-085 $434.62



For Paint aluminum body one standard color non-base coat $1,771.68For LB510 hoist for a 11' or 12' body $181.36For Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For Base coat / clear coat for paint $448.25For LED STT P/N 139-077 $82.81For delete tailgate & tailgate hardware $796.89For manual Tarp Mesh style 1645714 $571.84For Con Slip Liner Application-Per foot Floor only $185.00For Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For ECCO 3510A Surface Mt Strobes Installed $226.89For Poly Fenders 19.5 985-1901 Installed $532.84For 1 Buyers 1492115 4.6" round LED flood light Installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73For 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0 DUMP BODYMake Buyers Dumper DoggWarranty 2 yearsDate & I.D. of Price List 11/15/2017Discount to be applied to Price List 0%


Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWEDDelivery Starting Point Address Mentor, Ohio 44060Price per loaded mile for delivery $2.75Delivery Time Frame in calendar days ARO



Fridley, MN 55432





5.0

Make Dumper Dogg Dump Inserts (5531000)8' long Steel ConstructionPower up and down12 gauge steel powder coated blackTethered control box 9' cordGrease fittings20' battery cablesTailgate chains3/4" diameter tailgate hinge pins6" Aluminum Long sillsbody-up indicator (kit SK10)Dump angle 0 - 45 degreePayload capacity 6000 lbs.

Price $2,976.13

Warranty 1 year



6' Mild Steel P/N 5531006 $2,976.13

8' Stainless Steel P/N 5534000 $3,926.43

6' Stainless Steel P/N 5534006 $3,926.43

Add for Bolt-on mild steel cab Guards for 6' & 8' Steel $490.44Add for Bolt-on stainless steel cab Guards for 6' & 8' Steel $646.56Add for mild steel wall extension bracket kit for 6' &8' steel insert $400.84(hardware and 2 brackets per side) accepts one 2" x 12" per side Part number 5531020Add for stainless steel wall extension bracket kit for 6' &8' steel insert $429.35(hardware and 2 brackets per side) accepts one 2" x 12" per side Part number 5534020Add for Stainless Steel Tailgate Sander $3,115.96



Dump Body





5.0

Make Dumper Dogg Dump Inserts (5532000)8' long Poly ConstructionPower up and down12 gauge steel powder coated blackTethered control box 9' cordGrease fittings20' battery cablesTailgate chains3/4" diameter tailgate hinge pinsbody-up indicator (kit SK10)Dump angle 0 - 45 degreePayload capacity 6000 lbs.

Price $3,251.72

Warranty 1 years



Add for bracket kit for side wall extensions $400.84Add for Stainless Steel Tailgate Sander $3,115.96



Dump Body





5.0 DUMP BODYMake Future Line Aluminum Warranty 1 yearDate & I.D. of Price List 11/10/2017Discount to be applied to Price List 0%


Delivery SEE SPECIAL TERMS AND CONDITIONS - NO FLAT RATE ALLOWEDDelivery Starting Point Address Lake Crystal MNPrice per loaded mile for delivery $2.25Delivery Time Frame in calendar days ARO


*Note: The "Discount to be Applied to Price List" must be a numeric percentage. Not listing a numeric percentage may result in your bid being rejected.


Fridley, MN 55432





5.0

Make Aluminum Contractor AMM85805168.5' long x 80" wideLED lights, rubber grommets and sealed wire harness3/16" 5052 H34 Aluminum floors, inside sides, rear post and bulkhead1/8" 5052 H34 Aluminum floors, inside tailgate5" long sills .190 Extruded aluminum channel 6061-T6 material4" Cross sills .160 extruded aluminum channel 6061-T6 on 16" centerLED lighting FMVSS108Double panel sides and tailgate with quick releaseDouble Acting tailgate16" sides and tailgate12' body only no side door on 9' bodiesAluminum finish-no paint included

Price $5,135.77

Warranty 1year







Installation of hoist w/ steel long sills $903.90


For 9'4" x 96" ILO Std AMM0996515 Add $1,475.39For 11'4" x 96" ILO Std AMM1196515 Add $3,026.58For 12'4 x 96" ILO Std AMM1296516 Add $3,408.17For 1/4" Cab Shield 12" x 90" $755.05For Cab Shield weld on CSW1000 $446.61

Dump Body



For Coal chute installed ACC1000 $544.94For Paint aluminum body one standard color non-base coat $1,771.68For LB510 hoist for a 11'4" or 12'4" body $174.58For Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in cab $457.80For Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For Base coat / clear coat for paint $448.25For delete tailgate & tailgate hardware -$457.38For Ovals in front posts facing rear $133.29For Con Slip Liner Application-Per foot Floor only $185.00For Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For ECCO 3510A Surface Mt Strobes Installed $226.89For Poly Fenders 19.5 985-1901 Installed $532.84For 1 Buyers 1492115 4.6" round LED flood light Installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switch $439.73For 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash switch $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included





5.0

Make Aluminum Dump Body 3 -4 yard ARM85805168.5' long x 80" wideLED lights, rubber grommets and sealed wire harness3/16" 5052 H34 Aluminum floors, inside sides, rear post and bulkhead1/8" 5052 H34 Aluminum floors, inside tailgate5" long sills .190 Extruded aluminum channel 6061-T6 material4" Cross sills .160 extruded aluminum channel 6061-T6 on 16" centerLED lighting FMVSS108Double panel sides and tailgate Double Acting tailgate16" sides and tailgateAluminum finish-no paint included

Price $4,737.20

Warranty 1year







Installation of hoist w/steel long sills $903.90


For 9'4" x 96" ILO Std ARM0996515 Add $1,472.78For 11'4" x 96" ILO Std ARM1196516 Add $3,026.58For 12'4 x 96" ILO Std ARM1296516 Add $3,408.17For 1/4" cab shield 12" x 90" ACS1290 $773.32For Cab Shield weld on CSW1000 $446.55For Coal chute installed ACC1000 $546.12

Dump Body



For Paint aluminum body one standard color non-base coat $1,771.68For LB510 hoist for a 11'4" or 12'4" body $174.58For Whelen L21 HAP strobe w/ self leveling bracket on cab shield and switch in ca $457.80For Whelen L21 HAP strobe w/hard mount bracket on cab shield and switch in cab $457.80For Base coat / clear coat for paint $448.25For delete tailgate & tailgate hardware -$457.38For Ovals in front posts facing rear $133.29For Con Slip Liner Application-Per foot Floor only $185.00For Pull Plate Protection Spray ILO Paint $233.70For 560-STA20502-G Back up Alarm Installed $66.18For R10HDPA Whelen Mini Light bar With self leveling bracket Installed $1,424.05For Branch guard for R10HDPA Light Bar Installed $180.76For Whelen L31HAF Super Led Installed $754.35For 605-STL211RB LED STT Installed $187.51For LED 6" Oval Warning Light 605-SL66AO Installed $111.41For 6" Oval Lite Box Enclosed Type PN 605-LB383 Installed $173.54For ECCO 3510A Surface Mt Strobes Installed $226.89For Poly Fenders 19.5 985-1901 Installed $532.84For 1 Buyers 1492115 4.6" round LED flood light Installed $217.42For 1 ECCO 5580A Mini Light Bar installed on cab shield, wired to in dash switch $461.93For 1 Buyers 8891060 Mini Light Bar installed on cab shield, wired to in dash switc $439.73For 1 Whelen TA87OL Traffic Advisor installed on cab shield, wired to in dash swit $2,020.73For ICC Bumper $101.82For installation of ICC Bumper $114.19For FMVSS 108 lights IncludedFor Installation of FMVSS 108 lights Included



crysteel truck equipment jim wyatt 1130 73rd ave ne ... · for 1 buyers 1492115 4.6" round led...

Documents