crn3-4 a-p-g-v-hqqv 1x220/240 50hz - lenntech · grundfos data booklet crn3-4 a-p-g-v-hqqv...

GRUNDFOS DATA BOOKLET

CRN3-4 A-P-G-V-HQQV 1x220/240 50HZ Grundfos Pump 96558304

Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttp://www.lenntech.com/grundfos/CRN03/96558304/CRN-3-4-A-P-G-V-HQQV.html

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

BE > THINK > INNOVATE

Company name: Lenntech BV - lenntech.comCreated by: [email protected]: +31 15 2610900Fax: +31 15 2616289Date: -

Printed from Grundfos CAPS [2013.03.059]

Position Qty. Description1 CRN 3-4 A-P-G-V-HQQV

Note! Product picture may differ from actual product

Product No.: 96558304

Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)enabling installation in a horizontal one-pipe system. Pump materials in contact with the liquid are inhigh-grade stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easyservice and access. Power transmission is via a split coupling. Pipework connection is via PJE(Victaulic®) couplings.

The pump is fitted with a 1-phase, fan-cooled asynchronous motor.

Further product detailsSteel, cast iron and aluminium components have an epoxy-based coating made in a cathodicelectro-deposition (CED) process. CED is a high-quality dip-painting process where an electricalfield around the products ensures deposition of paint particles as a thin, well-controlled layer on thesurface. An integral part of the process is a pretreatment. The entire process consists of theseelements:

1) Alkaline-based cleaning.2) Zinc phosphating.3) Cathodic electro-deposition.4) Curing to a dry film thickness 18-22 my m.The colour code for the finished product is NCS 9000/RAL 9005.

PumpA standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motorstool by means of two coupling guards.

The pump head and flange for motor mounting is made in one piece (cast iron). The pump headcover is a separate component (stainless steel). The pump head has a combined 1/2" priming plugand air vent screw.

1/8

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=96558304&freq=50&lang=ENU



Position Qty. DescriptionThe pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This sealtype is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,this seal type is suitable for high-pressure applications. The cartridge construction also protects thepump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.

Primary seal:- Rotating seal ring material: Silicon carbide (SiC)- Stationary seat material: Silicon carbide (SiC)

This material pairing is used where higher corrosion resistance is required. The high hardness ofthis material pairing offers good resistance against abrasive particles.Secondary seal material: FKM (fluorocarbon rubber)FKM has excellent resistance to oils and chemicals. Above 90 °C, FKM should only be used inmedia without water.

The shaft seal is screwed into the pump head.

The chambers and impellers are made of stainless steel sheet. The chambers are provided with aPTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,and the shape of the blades ensure a high efficiency.

The pump has a stainless steel base mounted on a separate base plate. The base and base plateare kept in position by the tension of the staybolts which hold the pump together. The discharge sideof the base has a combined drain plug and bypass valve. The pump is secured to the foundation byfour bolts through the base plate. The base is prepared for connection by means of PJE (Victualic®)couplings.

MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DINstandards. The motor is flange-mounted with tapped-hole flange (FT).Motor mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).Electrical tolerances comply with IEC 60034.

The motor has built-in thermal protection (PTO current and temperature sensors) in accordance withIEC 60034-11 and requires no further motor protection. The protection reacts to both slow- andquick-rising temperatures, e.g. constant overload and stalled conditions.As the thermal protection incorporates automatic reset, the motor must be connected in a way whichensures that the automatic reset cannot cause accidents.

Technical data

2/8



Position Qty. DescriptionLiquid:Pumped liquid: WaterLiquid temperature range: 253 .. 363 KLiquid temp: 293 KDensity: 998.2 kg/m³

Technical:Speed for pump data: 2757 rpmRated flow: 3 m³/hRated head: 18 mShaft seal: HQQVApprovals on nameplate: CE,TRCurve tolerance: ISO 9906:1999 Annex A

Materials:Pump housing: Stainless steel

DIN W.-Nr. 1.4408AISI 316ASTM A 351 CF 8M

Impeller: Stainless steelDIN W.-Nr. 1.4401AISI 316

Installation:Maximum ambient temperature: 313 KMax pressure at stated temp: 25 bar / 90 °C

25 bar / -20 °CFlange standard: PJEPipe connection: 42,2 mmFlange size for motor: FT85

Electrical data:Motor type: 71BIE Efficiency class: NANumber of poles: 2Rated power - P2: 0.37 kWPower (P2) required by pump: 0.37 kWMains frequency: 50 HzRated voltage: 1 x 220-230/240 VRated current: 2,95/2,70 AStarting current: 280 %Cos phi - power factor: 0,99Rated speed: 2770 rpmMotor efficiency at full load: 60,0-56,0 %Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)Insulation class (IEC 85): F

Others:Minimum efficiency index, MEI ≥: 0.7Net weight: 17.6 kgGross weight: 20.3 kgShipping volume: 0.05 m3

3/8



96558304 CRN 3-4 50 Hz

H[m]

0

2

4

6

8

10

12

14

16

18

20

22

24

26

28

Q [m³/h]0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2

eta[%]

0

10

20

30

40

50

60

70

80

90

100

CRN 3-4, 1*230 V, 50Hz

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P[W]

0

100

200

300

400

500

600

NPSH[m]

0

1

2

3

4

5

6P1

P2

4/8



H[m]

02468

101214161820222426

Q [m³/h]0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0

eta[%]

0102030405060708090100

CRN 3-4, 1*230 V, 50Hz

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P[W]

0

200

400

NPSH[m]

0

2

4

P1

P2

141

133

210

150

100

180

210

G 1

/2G

1/2

G 1

/2

4 x

13

191 275

50

42.2

22

AUX

MAIN

NL

LOW

VO

LTA

GE

DIR

EC

TIO

N O

F R

OTA

TIO

N

AUX

MAIN

NL

HIG

H V

OLT

AG

E

DIR

EC

TIO

N O

F R

OTA

TIO

N

Description ValueProduct name: CRN 3-4 A-P-G-V-HQQVProduct No: 96558304EAN number: 5700399155040

Technical:Speed for pump data: 2757 rpmRated flow: 3 m³/hRated head: 18 mImpellers: 4Shaft seal: HQQVApprovals on nameplate: CE,TRCurve tolerance: ISO 9906:1999 Annex AStages: 4Pump version: AModel: A

Materials:Pump housing: Stainless steel

DIN W.-Nr. 1.4408AISI 316ASTM A 351 CF 8M

Impeller: Stainless steelDIN W.-Nr. 1.4401AISI 316

Material code: GCode for rubber: V

Installation:Maximum ambient temperature: 313 KMax pressure at stated temp: 25 bar / 90 °C

25 bar / -20 °CFlange standard: PJEConnect code: PPipe connection: 42,2 mmFlange size for motor: FT85

Liquid:Pumped liquid: WaterLiquid temperature range: 253 .. 363 KLiquid temp: 293 KDensity: 998.2 kg/m³

Electrical data:Motor type: 71BIE Efficiency class: NANumber of poles: 2Rated power - P2: 0.37 kWPower (P2) required by pump: 0.37 kWMains frequency: 50 HzRated voltage: 1 x 220-230/240 VRated current: 2,95/2,70 AStarting current: 280 %Cos phi - power factor: 0,99Rated speed: 2770 rpmMotor efficiency at full load: 60,0-56,0 %Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)Insulation class (IEC 85): FMotor protec: PTOMotor No: 85215102

Others:Minimum efficiency index, MEI ≥: 0.7Net weight: 17.6 kgGross weight: 20.3 kg

5/8

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=96558304&freq=50&lang=ENU



Description ValueShipping volume: 0.05 m3

6/8



Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

96558304 CRN 3-4 50 Hz

141

133

210150100 180

210

G 1/2G 1/2

G 1/2

4 x 13

191

275

50

42.2

22

7/8



Note! All units are in [mm] unless others are stated.

96558304 CRN 3-4 50 Hz

AU

X

MA

IN

NL

LOW VOLTAGE

DIRECTION OF ROTATION

AU

X

MA

IN

NL

HIGH VOLTAGE

DIRECTION OF ROTATION

8/8

Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

crn3-4 a-p-g-v-hqqv 1x220/240 50hz - lenntech · grundfos data booklet crn3-4 a-p-g-v-hqqv...

Documents