crn3-2 a-p-g-e-hqqe 1x220/240 50hz - lenntech · 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 q [m³/h] eta...

GRUNDFOS DATA BOOKLET

CRN3-2 A-P-G-E-HQQE 1x220/240 50HZ Grundfos Pump 96533250

Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttp://www.lenntech.com/grundfos/CRN03/96533250/CRN-3-2-A-P-G-E-HQQE.html

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

BE > THINK > INNOVATE

Company name: Lenntech BV - lenntech.comCreated by: [email protected]: +31 15 2610900Fax: +31 15 2616289Date: -

Printed from Grundfos CAPS [2013.03.059]

Position Qty. Description1 CRN 3-2 A-P-G-E-HQQE

Note! Product picture may differ from actual product

Product No.: 96533250

Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)enabling installation in a horizontal one-pipe system. Pump materials in contact with the liquid are inhigh-grade stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easyservice and access. Power transmission is via a split coupling. Pipework connection is via PJE(Victaulic®) couplings.

The pump is fitted with a 1-phase, fan-cooled asynchronous motor.

Further product detailsSteel, cast iron and aluminium components have an epoxy-based coating made in a cathodicelectro-deposition (CED) process. CED is a high-quality dip-painting process where an electricalfield around the products ensures deposition of paint particles as a thin, well-controlled layer on thesurface. An integral part of the process is a pretreatment. The entire process consists of theseelements:

1) Alkaline-based cleaning.2) Zinc phosphating.3) Cathodic electro-deposition.4) Curing to a dry film thickness 18-22 my m.The colour code for the finished product is NCS 9000/RAL 9005.

PumpA standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motorstool by means of two coupling guards.

The pump head and flange for motor mounting is made in one piece (cast iron). The pump headcover is a separate component (stainless steel). The pump head has a combined 1/2" priming plugand air vent screw.

1/8

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=96533250&freq=50&lang=ENU



Position Qty. DescriptionThe pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This sealtype is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,this seal type is suitable for high-pressure applications. The cartridge construction also protects thepump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.

Primary seal:- Rotating seal ring material: Silicon carbide (SiC)- Stationary seat material: Silicon carbide (SiC)

This material pairing is used where higher corrosion resistance is required. The high hardness ofthis material pairing offers good resistance against abrasive particles.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft seal is screwed into the pump head.

The chambers and impellers are made of stainless steel sheet. The chambers are provided with aPTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,and the shape of the blades ensure a high efficiency.

The pump has a stainless steel base mounted on a separate base plate. The base and base plateare kept in position by the tension of the staybolts which hold the pump together. The discharge sideof the base has a combined drain plug and bypass valve. The pump is secured to the foundation byfour bolts through the base plate. The base is prepared for connection by means of PJE (Victualic®)couplings.

MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DINstandards. The motor is flange-mounted with tapped-hole flange (FT).Motor mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).Electrical tolerances comply with IEC 60034.

The motor has built-in thermal protection (PTO current and temperature sensors) in accordance withIEC 60034-11 and requires no further motor protection. The protection reacts to both slow- andquick-rising temperatures, e.g. constant overload and stalled conditions.As the thermal protection incorporates automatic reset, the motor must be connected in a way whichensures that the automatic reset cannot cause accidents.

Technical data

Liquid:

2/8



Position Qty. DescriptionPumped liquid: WaterLiquid temperature range: 253 .. 393 KLiquid temp: 293 KDensity: 998.2 kg/m³

Technical:Speed for pump data: 2757 rpmRated flow: 3 m³/hRated head: 9.6 mShaft seal: HQQEApprovals on nameplate: CE,TRCurve tolerance: ISO 9906:1999 Annex A

Materials:Pump housing: Stainless steel

DIN W.-Nr. 1.4408ASTM A 351 CF 8M

Impeller: Stainless steelDIN W.-Nr. 1.4401AISI 316

Installation:Maximum ambient temperature: 313 KMax pressure at stated temp: 25 bar / 120 °C

25 bar / -20 °CFlange standard: PJEPipe connection: 42,2 mmFlange size for motor: FT85

Electrical data:Motor type: 71BIE Efficiency class: NANumber of poles: 2Rated power - P2: 0.37 kWPower (P2) required by pump: 0.37 kWMains frequency: 50 HzRated voltage: 1 x 220-230/240 VRated current: 2,95/2,70 AStarting current: 280 %Cos phi - power factor: 0,99Rated speed: 2770 rpmMotor efficiency at full load: 60,0-56,0 %Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)Insulation class (IEC 85): F

Others:Minimum efficiency index, MEI ≥: 0.7Net weight: 17.1 kgGross weight: 19.7 kgShipping volume: 0.04 m3

3/8



96533250 CRN 3-2 50 Hz

H[m]

0

1

2

3

4

5

6

7

8

9

10

11

12

13

14

Q [m³/h]0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 4.2 4.4

eta[%]

0

10

20

30

40

50

60

70

80

90

CRN 3-2, 1*230 V, 50Hz

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P[W]

0

100

200

300

400

500

NPSH[m]

0

1

2

3

4

5P1

P2

4/8



H[m]

0123456789

10111213

Q [m³/h]0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0

eta[%]

0102030405060708090

CRN 3-2, 1*230 V, 50Hz

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P[W]

0

200

400

NPSH[m]

0

2

4

P1

P214

1

133

210

150

100

180

210

G 1

/2G

1/2

G 1

/2

4 x

13

191 257

50

42.2

22

AUX

MAIN

NL

LOW

VO

LTA

GE

DIR

EC

TIO

N O

F R

OTA

TIO

N

AUX

MAIN

NL

HIG

H V

OLT

AG

E

DIR

EC

TIO

N O

F R

OTA

TIO

N

Description ValueProduct name: CRN 3-2 A-P-G-E-HQQEProduct No: 96533250EAN number: 5700397438268

Technical:Speed for pump data: 2757 rpmRated flow: 3 m³/hRated head: 9.6 mImpellers: 2Shaft seal: HQQEApprovals on nameplate: CE,TRCurve tolerance: ISO 9906:1999 Annex AStages: 3Pump version: AModel: A

Materials:Pump housing: Stainless steel

DIN W.-Nr. 1.4408ASTM A 351 CF 8M

Impeller: Stainless steelDIN W.-Nr. 1.4401AISI 316

Material code: GCode for rubber: E

Installation:Maximum ambient temperature: 313 KMax pressure at stated temp: 25 bar / 120 °C

25 bar / -20 °CFlange standard: PJEConnect code: PPipe connection: 42,2 mmFlange size for motor: FT85

Liquid:Pumped liquid: WaterLiquid temperature range: 253 .. 393 KLiquid temp: 293 KDensity: 998.2 kg/m³

Electrical data:Motor type: 71BIE Efficiency class: NANumber of poles: 2Rated power - P2: 0.37 kWPower (P2) required by pump: 0.37 kWMains frequency: 50 HzRated voltage: 1 x 220-230/240 VRated current: 2,95/2,70 AStarting current: 280 %Cos phi - power factor: 0,99Rated speed: 2770 rpmMotor efficiency at full load: 60,0-56,0 %Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)Insulation class (IEC 85): FMotor protec: PTOMotor No: 85215102

Others:Minimum efficiency index, MEI ≥: 0.7Net weight: 17.1 kgGross weight: 19.7 kgShipping volume: 0.04 m3

5/8

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=96533250&freq=50&lang=ENU



Description ValueSales region: GB

6/8



Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

96533250 CRN 3-2 50 Hz

141

133

210150100 180

210

G 1/2G 1/2

G 1/2

4 x 13

191

257

50

42.2

22

7/8



Note! All units are in [mm] unless others are stated.

96533250 CRN 3-2 50 Hz

AU

X

MA

IN

NL

LOW VOLTAGE

DIRECTION OF ROTATION

AU

X

MA

IN

NL

HIGH VOLTAGE

DIRECTION OF ROTATION

8/8

Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

crn3-2 a-p-g-e-hqqe 1x220/240 50hz - lenntech · 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 q [m³/h] eta...

Documents