crn10-12 a-p-g-e-hqqe 3x400d 50 hz … · crn10-12 a-p-g-e-hqqe 3x400d 50 hz ... a cartridge shaft...

GRUNDFOS DATA BOOKLET

CRN10-12 A-P-G-E-HQQE 3x400D 50 HZ Grundfos Pump 96501282

Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttp://www.lenntech.com/grundfos/CRN10/96501282/CRN-10-12-A-P-G-E-HQQE.html

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

BE > THINK > INNOVATE

Company name: Lenntech BV - lenntech.comCreated by: [email protected]: +31 15 2610900Fax: +31 15 2616289Date: -

Printed from Grundfos CAPS [2013.03.059]

Position Qty. Description1 CRN 10-12 A-P-G-E-HQQE

Note! Product picture may differ from actual product

Product No.: 96501282

Vertical, multistage centrifugal pump with suction and discharge ports on same the level (in-line)enabling installation in a horizontal one-pipe system. Pump materials in contact with the liquid are inhigh-grade stainless steel. A cartridge shaft seal ensures high reliability, safe handling and easyservice and access. Power transmission is via a split coupling. Pipework connection is via PJE(Victaulic®) couplings.

The pump is fitted with a 3-phase, fan-cooled asynchronous motor.

Further product detailsThe product carries the Grundfos Blueflux® label. It represents the best from Grundfos withinenergy-efficient motors and frequency converters. Grundfos Blueflux® solutions either meet orexceed legislative requirements such as the EuP IE3 grade.

Steel, cast iron and aluminium components have an epoxy-based coating made in a cathodicelectro-deposition (CED) process. CED is a high-quality dip-painting process where an electricalfield around the products ensures deposition of paint particles as a thin, well-controlled layer on thesurface. An integral part of the process is a pretreatment. The entire process consists of theseelements:

1) Alkaline-based cleaning.2) Zinc phosphating.3) Cathodic electro-deposition.4) Curing to a dry film thickness 18-22 my m.The colour code for the finished product is NCS 9000/RAL 9005.

PumpA standard split coupling connects the pump and motor shaft. It is enclosed in the pump head/motorstool by means of two coupling guards.

1/9

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=96501282&freq=50&lang=ENU



The pump head and flange for motor mounting is made in one piece (cast iron). The pump head cover is aseparate component (stainless steel). The pump head has a combined 1/2" priming plug and air vent screw.

The pump is fitted with a balanced O-ring seal unit with rigid torque transmission system. This sealtype is assembled in a cartridge unit which makes replacement safe and easy. Due to the balancing,this seal type is suitable for high-pressure applications. The cartridge construction also protects thepump shaft from possible wear from a dynamic O-ring between pump shaft and shaft seal.

Primary seal:- Rotating seal ring material: Silicon carbide (SiC)- Stationary seat material: Silicon carbide (SiC)

This material pairing is used where higher corrosion resistance is required. The high hardness ofthis material pairing offers good resistance against abrasive particles.Secondary seal material: EPDM (ethylene-propylene rubber)EPDM has excellent resistance to hot water. EPDM is not suitable for mineral oils.

The shaft seal is screwed into the pump head.

The chambers and impellers are made of stainless steel sheet. The chambers are provided with aPTFE neck ring offering improved sealing and high efficiency. The impellers have smooth surface,and the shape of the blades ensure a high efficiency.

The pump has a stainless steel base mounted on a separate base plate. The base and base plateare kept in position by the tension of the staybolts which hold the pump together. The discharge sideof the base has a drain plug. The pump is secured to the foundation by four bolts through the baseplate. The base is prepared for connection by means of PJE (Victualic®) couplings.

MotorThe motor is a totally enclosed, fan-cooled motor with principal dimensions to IEC and DINstandards. The motor is flange-mounted with tapped-hole flange (FT).Motor mounting designation in accordance with IEC 60034-7: IM B 14 (Code I) / IM 3601 (Code II).

2/9



Position Qty. DescriptionElectrical tolerances comply with IEC 60034.

The motor efficiency is classified as IE3 in accordance with IEC 60034-30.

The motor has thermistors (PTC sensors) in the windings in accordance with DIN 44081/DIN 44082.The protection reacts to both slow- and quick-rising temperatures, e.g. constant overload and stalledconditions.Thermal switches must be connected to an external control circuit in a way which ensures that theautomatic reset cannot cause accidents. The motors must be connected to a motor-protective circuitbreaker according to local regulations.

The motor can be connected to a variable speed drive for adjustment of pump performance to anyduty point. Grundfos CUE offers a range of variable speed drives. Please find more information inWin-/WebCAPS.

Technical data

Liquid:Pumped liquid: WaterLiquid temperature range: 253 .. 393 KLiquid temp: 293 KDensity: 998.2 kg/m³

Technical:Speed for pump data: 2917 rpmRated flow: 10 m³/hRated head: 96.7 mShaft seal: HQQEApprovals on nameplate: CE,TRCurve tolerance: ISO 9906:1999 Annex A

Materials:Pump housing: Stainless steel

DIN W.-Nr. 1.4408ASTM A 351 CF 8M

Impeller: Stainless steelDIN W.-Nr. 1.4401AISI 316

Installation:Maximum ambient temperature: 333 KMax pressure at stated temp: 25 bar / 120 °C

25 bar / -20 °CFlange standard: PJEPipe connection: 60,1 mmFlange size for motor: FT130

Electrical data:Motor type: 112MCIE Efficiency class: IE3Number of poles: 2Rated power - P2: 4 kWPower (P2) required by pump: 4 kWMains frequency: 50 HzRated voltage: 3 x 380-415 D VRated current: 7.9 AStarting current: 1000-1110 %

3/9



Position Qty. DescriptionCos phi - power factor: 0,87-0,87Rated speed: 2920-2940 rpmEfficiency: IE3 88,1%Motor efficiency at full load: 88,1-88,1 %Motor efficiency at 3/4 load: 88,6-88,2 %Motor efficiency at 1/2 load: 85,2-88,1 %Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)Insulation class (IEC 85): F

Others:Label: Grundfos BluefluxMinimum efficiency index, MEI ≥: 0.7Net weight: 67 kgGross weight: 71 kgShipping volume: 0.12 m3

4/9



96501282 CRN 10-12 50 Hz

H[m]

0

10

20

30

40

50

60

70

80

90

100

110

120

130

Q [m³/h]0 1 2 3 4 5 6 7 8 9 10 11 12 13

eta[%]

0

10

20

30

40

50

60

70

80

90

100

CRN 10-12, 3*400 V, 50Hz

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P[kW]

0

1

2

3

4

5

NPSH[m]

0

2

4

6

8

10P1

P2

5/9



H[m]

0102030405060708090

100110120130

Q [m³/h]0 2 4 6 8 10 12

eta[%]

0102030405060708090100

CRN 10-12, 3*400 V, 50Hz

Pumped liquid = WaterLiquid temperature = 293 KDensity = 998.2 kg/m³

P[kW]

0

2

4

NPSH[m]

0

5

10P1

P2

134

220

130

200

261

215

248

G 1

/2G

1/2

G 1

/2

4 x

13

372 678

80

60.1

26

L3L2

L1

+T+T

+T

TO A

MP

LIFI

ER

RE

LAY

IEC TP211 THERMALLY PROTECTED WHEN THE THERMISTORS ARECONNECTED TO AMPLIFIER RELAY FOR CONTROL OF MAIN SUPPLYTHERMISTORS PTC ACCORDING TO DIN 44082

TO A

MP

LIFI

ER

RE

LAY

+T+T

+T

L1L2

L3

Description ValueProduct name: CRN 10-12 A-P-G-E-HQQEProduct No: 96501282EAN number: 5700396218991

Technical:Speed for pump data: 2917 rpmRated flow: 10 m³/hRated head: 96.7 mImpellers: 12Shaft seal: HQQEApprovals on nameplate: CE,TRCurve tolerance: ISO 9906:1999 Annex AStages: 12Pump version: AModel: A

Materials:Pump housing: Stainless steel

DIN W.-Nr. 1.4408ASTM A 351 CF 8M

Impeller: Stainless steelDIN W.-Nr. 1.4401AISI 316

Material code: GCode for rubber: E

Installation:Maximum ambient temperature: 333 KMax pressure at stated temp: 25 bar / 120 °C

25 bar / -20 °CFlange standard: PJEConnect code: PPipe connection: 60,1 mmFlange size for motor: FT130

Liquid:Pumped liquid: WaterLiquid temperature range: 253 .. 393 KLiquid temp: 293 KDensity: 998.2 kg/m³

Electrical data:Motor type: 112MCIE Efficiency class: IE3Number of poles: 2Rated power - P2: 4 kWPower (P2) required by pump: 4 kWMains frequency: 50 HzRated voltage: 3 x 380-415 D VRated current: 7.9 AStarting current: 1000-1110 %Cos phi - power factor: 0,87-0,87Rated speed: 2920-2940 rpmEfficiency: IE3 88,1%Motor efficiency at full load: 88,1-88,1 %Motor efficiency at 3/4 load: 88,6-88,2 %Motor efficiency at 1/2 load: 85,2-88,1 %Enclosure class (IEC 34-5): 55 (Protect. water jets/dust)Insulation class (IEC 85): FMotor protec: PTCMotor No: 85U15413

Others:Label: Grundfos Blueflux

6/9

http://net.grundfos.com/Appl/WebCAPS/Details?productnumber=96501282&freq=50&lang=ENU



Description ValueMinimum efficiency index, MEI ≥: 0.7Net weight: 67 kgGross weight: 71 kgShipping volume: 0.12 m3

7/9



Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

96501282 CRN 10-12 50 Hz

134

220

130200261

215248

G 1/2 G 1/2

G 1/2

4 x 13

372

678

80

60.1

26

8/9



Note! All units are in [mm] unless others are stated.

96501282 CRN 10-12 50 Hz

L3L2L1

+T +T+T

TO AMPLIFIERRELAY

IEC

TP

211

THE

RM

ALL

Y P

RO

TEC

TED

WH

EN

TH

E T

HE

RM

ISTO

RS

AR

EC

ON

NE

CTE

D T

O A

MP

LIFI

ER

RE

LAY

FO

R C

ON

TRO

L O

F M

AIN

SU

PP

LYTH

ER

MIS

TOR

S P

TC A

CC

OR

DIN

G T

O D

IN 4

4082

TO AMPLIFIERRELAY

+T +T+T

L1 L2 L3

9/9

Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

[email protected]. +31-15-261.09.00fax. +31-15-261.62.89

crn10-12 a-p-g-e-hqqe 3x400d 50 hz … · crn10-12 a-p-g-e-hqqe 3x400d 50 hz ... a cartridge shaft...

Documents