cree edge™ series...2018/12/10 · pwy-edg-5m-**-02-e-ul-350-40k initial delivered lumens: 1,780...
TRANSCRIPT
-
† See http://creelighting.com/warranty for warranty terms
US: creelighting.com (800) 236-6800Canada: creelighting-canada.com (800) 473-1234
Rev. Date: V9 06/07/2021
THE EDGE® SeriesLED Pathway Luminaire
Ordering InformationExample: PWY-EDG-2M-P0-02-E-UL-SV-350
PWY-EDG 02 E
Product Optic Mounting LED Count (x9) Series VoltageColor Options
Drive Current
Options
PWY-EDG 2MType II Medium3MType III Medium5MType V Medium5SType V Short
P013" (330mm) landscape- Not available with TRLP118" (457mm) landscape- Not available with TRLP336" (914mm) pathwayP442" (1067mm) pathwayP896" (2438mm) pedestrian
02 E ULUniversal120-277VUH*Universal347-480V- Available with P3, P4, and P8 mounts only- Not available with TRL12120V- Available only with TL options 27277V- Available only with TL options
BKBlackBZBronzeSVSilver WHWhite
350350mA- Not available with TRL525525mA- Available with P1,P3, P4, and P8mounts only
F Fuse- Compatible only with 120V, 277V or 347V (phase to neutral)- Consult factory if fusing is required for 208V, 240V or 480V (phase to phase)- When code dictates fusing, use time delay fuse- Not available with TRL
HL Hi/Low (Dual Circuit Input)- Available with UL voltage and 525mA driver current only- Must specify 525mA drive current- Refer to HL spec sheet for details- Sensor not included - Not available with TRL
TL Two-Level (175/525 w/integrated sensor control)- Available with 12 or 27 voltages only- Must specify 525mA drive current - Refer to TL spec sheet for details - Not available with TRL
TL2 Two-Level (0/350 w/integrated sensor control)- Available with 12 or 27 voltages only- Must specify 350mA drive current- Refer to TL spec sheet for details- Not available with TRL
TL3 Two-Level (0/525 w/integrated sensor control)- Available with 12 or 27 voltages only- Must specify 525mA drive current- Refer to TL spec sheet for details
WB Welded Base Plate- Standard on P8 mount option, available with P3 and P4 mount- Includes welded base cover
40K 4000K Color Temperature- Minimum 70 CRI- Color temperature per luminaire
TRL Amber Turtle Friendly LEDs- Available only with P3, P4 and P8 mounts, 120-277 Volt, 525mA drive current,
and TL3 or WB options- Lumen multiplier from 5700K, 525mA: 0.41- Power multiplier from 525mA: 0.75- 600nm dominant wavelength- Additional shielding (by others) may be required for Florida Fish and Wildlife
Conservation Commission compliance
Product DescriptionDurable die-cast aluminum luminaire housing mounts directly to 4" (102mm) diameter pole (included) without visible mounting hardware for clean appearance. Pole mounts to rugged die cast aluminum internal flange secured by three 3/8" - 16x6" anchor bolts with 1-1/4" hook (provided). Note: T45 Torx 3/8" socket required for head installation. Top mounted LEDs for superior optical performance and light control.Applications: Landscape, walk-ways and general site lighting
Accessories
Field-Installed
Upgrade Kit- Used for replacement of existing bollards with a bolt hole circle of 5.75" (146mm)XA-XBP8RSV XA-XBP8RWHXA-XBP8RBK XA-XBP8RBZ
Patented NanoOptic® Product Technology
Assembled in the U.S.A. of U.S. and imported parts
CRI: Minimum 70 CRI
CCT: 4000K (+/- 300K), 5700K (+/- 500K) standard
Limited Warranty†: 10 years on luminaire/10 years on Colorfast DeltaGuard® finish
Performance Summary
“A”
10.0"(254mm)
4.0"(102mm)
7.0"(177mm)
Model Dim. "A" Weight*
Landscape (P0) 13" (330mm) 12.7 lbs. (5.8kg)
Landscape (P1) 18" (457mm) 13.3 lbs. (6.0kg)
Pathway (P3) 36" (914mm) 17.9 lbs. (8.1kg)
Pathway (P4) 42" (1068mm) 18.6 lbs. (8.4kg)
Pedestrian (P8) 96" (2438mm) 28.4 lbs (12.9kg)
* Add 4.5 lbs. (2.0kg) for 347-480V
* 347-480V utilizes magnetic step-down transformer. For input power for 347-480V, refer to the Electrical Data table
https://www.creelighting.com/warrantyhttps://www.creelighting.comhttps://www.creelighting-canada.com/https://www.creelink.com/exLink.asp?25171536OU98A64I41695680https://www.creelink.com/exLink.asp?25539724OF78E64I40994989https://www.creelink.com/exLink.asp?25539724OF78E64I40994989
-
US: creelighting.com (800) 236-6800Canada: creelighting-canada.com (800) 473-1234
Product Specifications
CONSTRUCTION & MATERIALS• Durable die-cast aluminum luminaire housing mounts directly to 4"
(102mm) diameter pole (included) without visible mounting hardware for clean appearance
• Pole mounts to rugged die cast aluminum internal flange secured by three 3/8"-16x6" anchor bolts with 1-1/4" hook(provided). Note: T45 Torx 3/8" socket required for head installation
• Top mounted LEDs for superior optical performance and light control
• Open design, passive thermal management for superior lumen maintenance
• Exclusive Colorfast DeltaGuard® finish features an E-Coat epoxy primer with an ultradurable powder topcoat, providing excellent resistance to corrosion, ultraviolet degradation and abrasion. Black, bronze, silver and white are available
• Weight: See Dimension and Weight Chart on pages 1 and 4
ELECTRICAL SYSTEM• Input Voltage: 120-277V or 347-480V, 50/60Hz, Class 1 drivers • Power Factor: > 0.9 at full load at 120V• Total Harmonic Distortion: < 20% at full load at 120V• Integral 10kV surge suppression protection standard
• When code dictates fusing, a slow blow fuse or type C/D breaker should be used to address inrush current
REGULATORY & VOLUNTARY QUALIFICATIONS• cULus Listed
• Suitable for wet locations
• Meets IP66 requirements per IEC 60598-1 when ordered without TL options
• ANSI C136.2 10kV surge protection, tested in accordance with IEEE/ANSI C62.41.2
• Luminaire and finish endurance tested to withstand 5,000 hours of elevated ambient salt fog conditions as defined in ASTM Standard B 117
• Meets Buy American requirements within ARRA
• RoHS compliant. Consult factory for additional details• CA RESIDENTS WARNING: Cancer and Reproductive Harm –
www.p65warnings.ca.gov
1 Lumen maintenance values at 25˚C (77˚F) are calculated per IES TM-21 based on IES LM-80 report data for the LED package and in-situ luminaire testing. Luminaire ambient temperature factors (LATF) have been applied to all lumen maintenance factors. Please refer to the Temperature Zone Reference Document for outdoor average nighttime ambient conditions.2 In accordance with IES TM-21, Reported values represent interpolated values based on time durations that areup to 6x the tested duration in the IES LM-80 report for the LED.3 Estimated values are calculated and represent time durations that exceed the 6x test duration of the LED.
Electrical Data*
LED Count (x9)
System Watts120-277V
System Watts347-480V
Total Current (A)
120V 208V 240V 277V 347V 480V
350mA
02 22 28 0.18 0.12 0.10 0.10 0.09 0.13
525mA
02 34 40 0.29 0.19 0.17 0.15 0.12 0.13
THE EDGE® LED Pathway Luminaire
* Electrical data at 25˚C (77˚F). Actual wattage may differ by +/- 10% when operating between 120-277V or 347-480V +/- 10%
THE EDGE® Series Ambient Adjusted Lumen Maintenance1
Ambient CCT InitialLMF
25K hrReported2LMF
50K hrReported2LMF
75K hrEstimated3LMF
100K hrEstimated3LMF
5˚C (41˚F)
40K/57K 1.04 1.01 0.99 0.98 0.96
TRL 1.06 1.06 1.06 1.06 1.06
10˚C (50˚F)
40K/57K 1.03 1.00 0.98 0.97 0.95
TRL 1.04 1.04 1.04 1.04 1.04
15˚C (59˚F)
40K/57K 1.02 0.99 0.97 0.96 0.94
TRL 1.03 1.03 1.03 1.03 1.03
20˚C (68˚F)
40K/57K 1.01 0.98 0.96 0.95 0.93
TRL 1.01 1.01 1.01 1.01 1.01
25˚C (77˚F)
40K/57K 1.00 0.97 0.95 0.94 0.92
TRL 1.00 1.00 1.00 1.00 1.00
https://www.creelighting.comhttps://www.creelighting-canada.com/http://www.p65warnings.ca.govhttps://www.creelink.com/exLink.asp?28941892OJ75F58I45607275
-
US: creelighting.com (800) 236-6800Canada: creelighting-canada.com (800) 473-1234
PhotometryAll published luminaire photometric testing performed to IES LM-79-08 standards. To obtain an IES file specific to your project consult: http://creelighting.com/products/outdoor/bollards-and-pathway/cree-edge-pathway
THE EDGE® LED Pathway Luminaire
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
2M
RESTL Test Report #: PL5758-001PWY-EDG-2M-**-02-E-UL-350-40KInitial Delivered Lumens: 1,549
283
567
850
1134
60˚
90˚ 90˚
60˚
30˚
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
120˚120˚
150˚ 150˚
PWY-EDG-2M-**-02-E-UL-350-40KMounting Height: 3' (0.9m) A.F.G.Initial Delivered Lumens: 1,565Initial FC at grade
70˚
Position of vertical planeof maximum candlepower.
0'
0m
0m
1.5
1.5
1.5
1.5 3.0
3.0
3.0
3.0 4.6
4.6
4.6
4.6 6.16.1
6.1
6.1 7.67.6
0'
5'5'
5'
5'
10'10'
10'
10'
15'15'
15'
15'
20'20'
20'
21.2.1
20'
25'25'
CURB LINE
.5
Type II Medium Distribution
LED Count (x9)
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
350mA
02 1,565 B1 U0 G1 1,625 B1 U0 G1
525mA
02 2,191 B1 U0 G1 2,276 B1 U0 G1
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
3M
RESTL Test Report #: PL5698-001PWY-EDG-3M-**-02-E-UL-350-40KInitial Delivered Lumens: 1,470
219
439
658
878
60˚
90˚ 90°
60˚
30˚
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
120˚120˚
150˚ 150˚
PWY-EDG-3M-**-02-E-UL-350-40KMounting Height: 3' (0.9m) A.F.G.Initial Delivered Lumens: 1,389Initial FC at grade
60˚
Position of vertical planeof maximum candlepower.
0'
0m
0m
1.5
1.5
1.5
1.5 3.0
3.0
3.0
3.0 4.6
4.6
4.6
4.6 6.16.1
6.1
6.1 7.67.6
0'
5'5'
5'
5'
10'10'
10'
10'
15'15'
15'
15'
20'20'
20'
21.2
20'
25'25'
CURB LINE
.1.5
Type III Medium Distribution
LED Count (x9)
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
350mA
02 1,389 B1 U0 G1 1,442 B1 U0 G1
525mA
02 1,944 B1 U0 G1 2,019 B1 U0 G1
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
5M
RESTL Test Report #: PL5798-001PWY-EDG-5M-**-02-E-UL-350-40KInitial Delivered Lumens: 1,780
164
328
492
656
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
90˚ 90˚
60˚60˚
30˚
120˚
150˚ 150˚
120˚
PWY-EDG-5M-**-02-E-UL-350-40KMounting Height: 3' (0.9m) A.F.G.Initial Delivered Lumens: 1,666Initial FC at grade
Position of vertical planeof maximum candlepower.
0'
0m
0m
1.5
1.5
1.5
1.5 3.0
3.0
3.0
3.0 4.6
4.6
4.6
4.6 6.16.1
6.1
6.1 7.67.6
0'
5'5'
5'
5'
10'10'
10'
10'
15'15'
15'
15'
20'20'20'
20'
25'25'
21.2
.1
.5CURB LINE
60˚ Type V Medium Distribution
LED Count (x9)
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
350mA
02 1,666 B1 U2 G1 1,730 B1 U2 G1
525mA
02 2,333 B2 U2 G2 2,422 B2 U2 G2
https://www.creelighting.comhttps://www.creelighting-canada.com/https://www.creelighting.com/products/outdoor/bollards-and-pathway/cree-edge-pathwayhttps://www.creelighting.com/products/outdoor/bollards-and-pathway/cree-edge-pathwayhttps://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdfhttps://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdfhttps://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
-
© 2021 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content is subject to change. Patent www.creelighting.com/patents. Cree® and the Cree Lighting logo are registered trademarks of Cree, Inc. THE EDGE®, NanoOptic®, and Colorfast DeltaGuard® are registered trademarks of Cree Lighting, A company of IDEAL INDUSTRIES. The UL logo is a registered trademark of UL LLC.
US: creelighting.com (800) 236-6800Canada: creelighting-canada.com (800) 473-1234
PhotometryAll published luminaire photometric testing performed to IES LM-79-08 standards. To obtain an IES file specific to your project consult: http://creelighting.com/products/outdoor/bollards-and-pathway/cree-edge-pathway
THE EDGE® LED Pathway Luminaire
10.0"(254mm)
7.0"(177mm)
"A"
4.0"(102mm)
8.9"(226mm)
Model Dim. "A" Weight*
Pathway (P3) 36" (914mm) 17.9 lbs. (8.1kg)
Pathway (P4) 42" (1068mm) 18.6 lbs. (8.4kg)
Pedestrian (P8) 96" (2438mm) 28.4 lbs (12.9kg)
* Add 4.5 lbs. (2.0kg) for 347-480V
with Welded Base
* Initial delivered lumens at 25˚C (77˚F). Actual production yield may vary between -10 and +10% of initial delivered lumens** For more information on the IES BUG (Backlight-Uplight-Glare) Rating visit: https://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
5S
RESTL Test Report #: PL5759-001PWY-EDG-5S-**-02-E-UL-350-40KInitial Delivered Lumens: 1,897
229
459
688
917
Candlepower Trace: Vertical plane throughhorizontal angle of maximum candlepower.
90˚ 90˚
60˚60˚
30˚
120˚
150˚ 150˚
120˚
PWY-EDG-5S-**-02-E-UL-350-40KMounting Height: 3' (0.9m) A.F.G.Initial Delivered Lumens: 1,868Initial FC at grade
1.2.1
.5
Position of vertical planeof maximum candlepower.
0'
0m
0m
1.5
1.5
1.5
1.5 3.0
3.0
3.0
3.0 4.6
4.6
4.6
4.6 6.16.1
6.1
6.1 7.67.6
0'
5'5'
5'
5'
10'10'
10'
10'
15'15'
15'
15'
20'20'20'
20'
25'25'
CURB LINE
2
90˚Type V Short Distribution
LED Count (x9)
4000K 5700K
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
InitialDeliveredLumens*
BUGRatings** Per TM-15-11
350mA
02 1,868 B1 U2 G1 1,940 B1 U2 G1
525mA
02 2,615 B1 U2 G1 2,716 B1 U2 G1
https://www.creelighting.comhttps://www.creelighting-canada.com/https://www.creelighting.com/products/outdoor/bollards-and-pathway/cree-edge-pathwayhttps://www.creelighting.com/products/outdoor/bollards-and-pathway/cree-edge-pathwayhttps://www.ies.org/wp-content/uploads/2017/03/TM-15-11BUGRatingsAddendum.pdf
LED Count 4: Voltage 4: Color Options: Drive Current 4: Options : Optic 3: Notes: