creating paper toys · back next 4. 5. 6. turn the helicopter over and then fold the other wing...
TRANSCRIPT
www.planbee.comNext
Creating Paper Toys
Today we will be...Learning how to make paper toys
www.planbee.comBack Next
Today we are going to look at different paper toys and how
to make them...
www.planbee.comBack Next
All of these toys have been made
from paper. What do you think each toy
does?
How do you think they were made? What looks easy? What looks difficult?
www.planbee.comBack Next
Let’s take a look at how to make the snail first...
www.planbee.comBack Next
1. 2. 3.
First, decorate the snail template. (You will have to decorate the other side of the snail’s body too.) Cut out both parts carefully.
Fold accurately along the dotted line so that the
snail’s head and eyes are facing forward!
Roll up the snail’s shell as tightly as you can, all the way to the end. Hold it
rolled up.
www.planbee.comBack Next
Now let go of the paper and it will uncurl. It will
start to look like the snail’s shell!
Decide where you want the shell to sit on the snail, and then tape it in place.
You have now made your very own paper snail!
4. 5. 6.
www.planbee.comBack Next
Let’s look at how to make
the helicopter
next...
www.planbee.comBack Next
1. 2. 3.
First, decorate the helicopter template. (You need to decorate one side of each ‘wing’.) Cut out
carefully.
Cut carefully along the black line to separate the two wings. Make sure you stop when you reach the
dotted line.
Fold the wing that you have decorated the back of along the dotted line.
You should now be able to see your design.
www.planbee.comBack Next
4. 6.5.
Turn the helicopter over and then fold the other
wing along the dotted line in the opposite direction to
the first wing.
Now fold along the dotted line at the bottom of the
helicopter. Put a paper clip on it to hold it in place.
Hold it in the centre (the ‘T’ shape part) then throw
it up in the air – you should see it spin!
www.planbee.comBack Next
Now let’s look at how to make the flapping
bird...
www.planbee.comBack Next
1. 3.2.
First, decorate the bird template. Cut out both
parts carefully.
Fold along the middle dotted line on the wings
so that they fold together.
Now fold along the other dotted lines so that the wings bend upwards.
www.planbee.comBack Next
4. 5. 6.
Put a piece of string through the wings, leaving a big loop before you tie it
at the top.
Place the wings on the body, and staple them
together, making sure the string is trapped between the paper and the staple.
Pull the string up and down to see the bird flap!
www.planbee.comBack Next
Next let’s look at how to make the
rolling dog...
www.planbee.comBack Next
1. 3.2.
First, decorate the dog template. Cut out
carefully.
Fold the dog in half accurately, using the black
line to help you. Make holes in the legs where
each circle is.
Carefully push a straw through the hole of one of
the legs.
www.planbee.comBack Next
4. 6.5.
Put a cotton reel on the straw, and then gently push the straw through the hole in the other leg.
Repeat this for the other pair of legs. Cut down the
straws if they are too long.
Push your dog and see him roll along!
www.planbee.comBack Next
Next let’s look at how to make the pecking bird...
www.planbee.comBack Next
1. 3.2.
First, decorate and then cut out your template.
Make sure you cut out the section between the beaks
and the feet carefully.
Fold along both dotted lines so that the front and
back of the bird come together.
Turn the template over. Cut a piece of straw the same length as the feet
section, and tape it securely in the middle.
www.planbee.comBack Next
5.4.
Fold again, and this time stick the two sides of the bird together. Make sure
you stick the feet together too.
Put some string through the straw.
Hold the string tightly and straight. Pull the bird to the top of the string, then let it go. He
should fall and peck all the way down the
string!
www.planbee.comBack Next
Finally let’s look at how to make the
circus rider...
www.planbee.comBack Next
1. 3.2.
First, decorate and then cut out both parts of the
template.
Carefully unfold a paper clip, making sure that the end on each side is still
curled.
Turn the template over. Fold up the white tab at the bottom of the shoe. Hook the paper clip in, and secure with tape.
www.planbee.comBack Next
4. 5.
Carefully, make a hole in the centre of the wheel.
Push the end of the paper clip that is attached to the
shoe through this hole.
Hold the other part of the paper clip straight, and push the wheel
along!
www.planbee.comBack Next
Are you ready to make your own paper toys now?
www.planbee.comBack
Plenary:
Which parts of making your toy
went well?
How do you think you
could improve your paper toy?
Which parts of making your toy were
tricky?
Look at your finished paper toy and think about these questions...