creating a standard operation for a wsm enabled organization_spd

8/14/2019 Creating a Standard Operation for a WSM Enabled Organization_SPD

1/21

System Process DocumentCreating a Standard Operation for a WSM Enabled

Organization

Department

Responsibility/Role

File Name 27760459.doc

Revision

Document Generation Date 18/01/2010 09:39:00

Date Modified 1/18/2010 09:39:00 AM

Last Changed by

Status

Creating a Standard Operation for a WSM Enabled OrganizationTrigger:

Concept

Standard operations are commonly used operations you can define as a template for use in

defining future routing operations. If you assign the operation code of standard operation in a

routing, the standard operation information is copied into the operation you are currently

defining. You can then modify the operation information in your new operation.

The following fields in the Standard Operation page are enabled only for a Shop Floor

Management enabled organization:

Lowest Acceptable Yield.

Use Organization Settings.

Queue Mandatory Flag.

Run Mandatory Flag.

To Move Mandatory Flag.

Show Next Operation by Default.

Show Lot Attributes.

Show Scrap Codes.

In this topic, you will create a standard operation for a Shop Floor Management enabled

organization.

Required Field(s) Comments

Output - Result(s) Comments

Last changed on: 1/18/2010 09:39:00 AM Page 1


2/21

System Process DocumentCreating a Standard Operation for a WSM EnabledOrganization

Additional Information

Page 2 Last changed on: 1/18/2010 09:39:00 AM


3/21


Organization

Procedure

Step Action

1. Begin by navigating to the Standard Operations page.

Click the vertical scrollbar.



4/21


Step Action

2. Click the Manufacturing and Distribution Manager link.



5/21


Organization

Step Action

3. Click the vertical scrollbar.

Step Action

4. Click the Standard Operations link.



6/21


Step Action

5. Use the Organizations page to select a Shop Floor enabled Organization.



7/21


Organization

Step Action

6. Click the M4 Minneapolis Manufacturing list item.

Step Action

7. Click the OKbutton.

orPress [Alt+O].



8/21


Step Action

8. Use the Standard Operations page to create a standard operation for a Shop FloorManagement enabled organization.



9/21


Organization

Step Action

9. Click the New button.

Step Action

10. Enter the desired information into the Code field. Enter "RT10".



10/21


Step Action

11. Click in the Description field.



11/21


Organization

Step Action

12. Enter the desired information into the Description field. Enter "Load Laser Saw".

Step Action

13. Click in the Department field.



12/21


Step Action

14. Enter the desired information into the Department field. Enter "FAB".



13/21


Organization

Step Action

15. This option indicates whether the operation is dependant on the choice of an

optional component.

Click the Option Dependent option.

Step Action

16. Click the horizontal scrollbar.



14/21


Step Action

17. Click in the Yield field.



15/21


Organization

Step Action

18. Enter the desired information into the Yield field. Enter ".85".

Step Action

19. Click the Shop Floor Transaction tab.



16/21


Step Action

20. All the fields that you see when you click the Shop Floor Transaction tab areenabled only for Shop Floor Management enabled organizations.



17/21


Organization

Step Action

21. Low Yield is a situation when the actual scrap quantity in an operation is higher

than the quantity derived from the Lowest Acceptable Yield. You can put a job onhold by defining the lowest acceptable yield for a given standard operation.

Click in the Lowest Acceptable Yield field.

Step Action

22. Enter the desired information into the Lowest Acceptable Yield field. Enter

".313".



18/21


Step Action

23. Click the Queue Mandatory option.



19/21


Organization

Step Action

24. Click the Run Mandatory option.

Step Action

25. Click the To Move Mandatory option.



20/21


Step Action

26. Click the horizontal scrollbar.



21/21


Organization

Step Action

27. Click the Save button.

Step Action

28. You have completed the Creating a Standard Operation for a WSM EnabledOrganization procedure.

End of Procedure.


creating a standard operation for a wsm enabled organization_spd

Documents