cqb sereis teflon lined magnetic drive pump
TRANSCRIPT
Structure and material
Pump housing
Impeller
Mouth ring
Seal ring
Spacer sleeve
Bearing
External magnet
Fluoroplastic
Alumina ceramic
Fluorubber
/1Cr18Ni9Ti
Fill
Fluoroplastics alloy/Permanent magnet
Polyethylene / Permanent magnet
Pump housing
Impeller
Mouth ring
Bearing
Main shaft
Seal ring
Media axis socket
Spacer sleeve
Rotor
Stainless cap
Bracket
External magnet
HT200 lined by
Fluoroplastics alloy
Alumina ceramic
Fill
Alumina ceramic
Fluorubber /
Fluoroplastic
Fluoroplastic
/ FeB
1Cr18Ni9Ti
Ht200
HT200 NdFeB
Pump housing
Impeller
Impeller nut
Mouth ring
Seal ring
Pump cover
Spacer sleeve
Rotor
Main shaft
External magnet
Bracket
HT200 lined by
Fluoroplastic
Fill
Alumina ceramic
Fluorubber
HT200
F46/ NdFeB
Silicon carbide
HT200 NdFeB
Ht200
F46/Reinforced carbon fibre
1 2
The products are widely appl icable to:
petrochemical industry, acid or base making, non-
ferrous metal metallurgy, acid-cleaning technique in
car-manufacturing, rare earth separation, pesticides,
dyes, medicines, papermaking, galvanization, and
radio industry, etc.
Service temperature: -20 ~100 .℃ ℃
Application
Magnetic Pump Series
Leak-proof design
Operating principle
Strong and sturdy pump housing
No shaft seal. Utilize magnetic coupling indirect driving, which
free you from the leak problem and will not contaminate the
site.
Because the pump's liquid carrying part is made of
Fluoroplastic alloy it can continually carry acid, base, or
strong oxidizer at any concentration without any damage.
In the driving device the initiative magnet junction box is
directly installed onto the motor shaft. The pump chamber is
totally sealed, and is propelled to rotate by the magnetic
impeller on the magnetic coupling indirect driving pump shaft,
its structure tight, safe, and energy-saving.
Though the liquid-touching part is made of fluoroplastics, the
pump enclosure is made of metal, so the pump can sustain
the pipe's weight and mechanical shock.
Design feature
Structure and material
Pump housing
Seal ring
Bearing
Impeller
Main shaft
Thrust plate
Spacer sleeve
External magnet
Fluoroplastic
Fluorubber /
High-density carbon
Fluoroplastic
Alumina ceramic
High-density carbon
Fluoroplastics
Permanent magnet
Pump housing
Auxiliary impeller
Seal ring
Impeller
Main shaft
Mouth ring
Bearing
Gasket
Spacer sleeve
External magnet
Fluoroplastic
Fluoroplastic
Fluorubber /
45# Steel,
Alumina ceramic
Alumina ceramic
Fluorubber /
F46/1Cr18Ni9Ti
Permanent magnet
Fluoroplastics alloy/Permanent magnet
Structure and material
WOLONG WOLONG
PTFE
PTFE
PTFE
PTFE
FEP
PTFE
FEP
PTFE
PTFE
FEP
cast iron
FEP
PTFE
cast iron lining PTFE
cast iron
CQB16-12-50FCQB15-15-65FCQB20-15-75FCQB25-20-100F
CQB32-20-110F
CQB40-40-100F
CQB50-32-125F
CQB40-40-125F
Applicable model: Applicable model: Applicable model:
1 CQB16-12-50F*0.6 2 8
0.8 1.5 109.0 16×12 2900 0.025 5
2 CQB15-15-65F
3 CQB20-15-75F
4 CQB25-20-100F
5 CQB32-20-110F
*0.8 3.2 16
1 2.8 18
1 7 20
*1.6 7 22
1 10.5 25
*2.5 10.5 28
4 13.5 30
*5.5 13 35
6.0 15×15 2900 0.180 7
6.0 20×15 2900 0.180 8
6.0 25×20 2900 0.370 12
6.0 32×20 2900 0.550 18
6 CQB40-25-120F
7 CQB40-40-100F
8 CQB40-40-125F
9 CQB50-32-125F
10 CQB50-32-125FA
11 CQB50-32-160FA
12 CQB50-32-200FA
13 CQB65-50-150F
14 CQB65-50-160F
15 CQB65-50-180F
16 CQB65-50-160FL
17 CQB65-40-200FA
18 CQB80-65-160FA
19 CQB80-50-200FA
20 CQB100-80-160FL
4 15 36
5.0 40×25 2900 0.750 35*6.3 15 42
8 12 42
4 11 38
5.0 40×40 2900 0.550 20*6 11 43
8 9 45
4 19 35
3.7 40×40 2900 1.1 40*6.5 17.5 42
9 16 40
7 22 28
3.5 50×32 2900 1.5 45*12 20 42
15 19 46
7 22 28
3.5 50×32 2900 2.2 105*12.5 20 42
15 19 46
7 33 30
3.5 50×32 2900 4.0 140*12.5 32 39
15 29 417 52 20
3.5 50×32 2900 7.5 210*12.5 50 31
15 48 35
15 26 40
4.0 65×50 2900 4.0 100 *20 25 48
25 24 52
15 32 38
4.0 65×50 2900 4.0 100 *17.5 32 40
20 29 47
6 37 22
4.0 65×50 2900 5.5 120 *8 36 28
10 33 30
15 33 41
4.0 65×50 2900 7.5 210 *25 32 51
30 29 55
15 51 41
4.0 65×40 2900 11.0 250*25 50 48
30 49 54
35 34 45
4.0 80×65 2900 11.0 285*50 32 60
60 28 52
35 52 50
4.0 80×50 2900 18.5 320*50 50 60
60 45 60
70 34 53
5.0 100×80 2900 18.5 300*100 32 58
120 30 60
3 4
1 2 4 6 8 10
20
15
10
5
3
40-40-125
40-25-12032-20-110
40-40-10025-20-100
20-15-75
15-15-65
m3m /h
H
Q
16-12-50
8 10 15 20 30 50 80 100 120
m
3m /h Q
H
50
30
20
10
50-32-200
65-50-180
50-32-160
50-32-125(L)
65-40-200
65-50-160(L)
65-50-150
80-50-200
80-65-160100-80-160
3m /h m % m mm r/min kw kgNumber Model
Flow rate Pump lift EfficiencyNet positivesuction head Inlet×Outlet
Rotationalspeed Power of motor
Weight of complete machine
Model and parameter
Note: 1. * stands for standard specifications; please choose parameters the same as or similar to what are in the table as much as possible, and if
the parameters are not included in the table, our factory can realize them by improving the impeller.
2. If the status point flow rate is too small, the inlet should be connected to the return pipe, and for more specific information you can
consult the company's technical department.
Performance curve diagram
CQB Magnet Pump (Figure 1)CQB Magnet Pump (Figure 2)
The medium is clear water(20℃) The medium is clear water(20℃)
CQB65-50-160FL(A)
CQB
65
50
160
F
L
A
Model meaning
Centrifugal pump drived by CQB magnet
The pump's inlet diameter is 65mm
The inlet diameter is 50mm
The impeller's norminal diameter is 160mm
It means the long bracket with underplate
It means distinction code
The material of the liquid carrying part is fluoroplastic alloy
Pictures of some products
WOLONG WOLONG
5 6
L S P f W T H h a g x
CQB16-12-50F
CQB15-15-65F
CQB20-15-75F
CQB25-20-100F
200 56 80 30 90 71 100 45 24 17 22
290 71 115 40 112 90 125 2056 20 25
316 71 120 55 112 90 138 56 27 20 38
360 80 150 60 125 100 165 63 34 26 49
430
435
510
430
65
50
85
65
60
67
76
60
CQB32-20-110F
CQB40-25-120F
CQB50-32-125F
CQB40-40-100F
200
270
225
200
125
65
65
125
148
175
192
148
115
150
158
115
216
244
268
216
105
113
128
105
120
140
130
130
90 90
100 100
120 100
130 100
65
75
90
100
4-φ13
4- M12
4-φ13
4-φ13
4-φ11
4-φ11
4-φ11
4-φ13
4-φ12
4-φ12
4-φ13
4-φ12
n-φd n-φt n-φD
n-φd n-φt
CQB50-32-125FA
CQB50-32-160FA
CQB50-32-200FA
CQB65-50-160FL
CQB65-40-200FA
CQB80-65-160FA
CQB80-50-200FA
CQB100-80-160FL
950
1025
1040
1180
1305
1420
1035
1255
895
920
990
1130
1160
1160
990
1130
590
590
650
720
730
730
650
720
75
100
90
105
130
130
170
130
80
80
80
80
100
100
80
100
395
390
450
500
480
480
150
485
352
392
440
440
420
440
392
500
212
232
260
260
240
240
232
280
24
24
25
24
24
24
24
24
165
165
165
185
200
200
185
220
125
125
125
145
160
160
145
180
100
100
100
110
145
125
125
160
330
330
380
435
430
430
380
435
140
140
140
150
185
165
165
200
4-φ18
4-M16
4- M16
4- M16
4- M16
8- M16
4- M16
8- M16
4- M16
4-φ18
4-φ18
4-φ18
4- M16
8- M16
8-φ18
8- M16
IMD40-25-165FAIMD50-40-165F
IMD65-50-130FIMD80-65-140F
IMD80-65-140FIMD100-80-180F
Dimension diagram for installation
Table 1:
Model
Applicable model: (For dimension see table 1)
Applicable model: (For dimension see diagram)Applicable model: (For dimension see diagram)
(For dimension see table 2)Applicable model:
CQB50-32-125FA CQB65-40-200FA
CQB50-32-160FA CQB80-65-160FA
CQB50-32-200FA CQB80-50-200FA
CQB65-50-160FL CQB100-80-160FL
Applicable model: (For dimension see table 3)
Table 2:
Model
Table 3:
Model
The IMD series magnetic drive pump is without shaft seal and utilizes the magnetic coupling indirect driving, totally eliminating leakage. The IMD series magnetic drive pump employs separation sleeve made of the state-of-the-art materials and has high-strength mechanical property, eliminating the magnetic eddy current phenomenon of general magnetic pump. The IMD series magnetic drive pump employs the exclusive pull-back structure, and a single person can easily conduct inner inspection and component changing, with no need to disassemmble the pipes, wich greatly helps daily inspection and maintaining work.
Magnetic pump series
Application3 IMD series magnetic pump, flow rate: 1~160 m /h; pump lift:
17~62m, applicable to the carrying of caustic, inflammable, explosible, toxic, or volatile chemical mediums.
Service temperature: -20 ~100 . Idle running is forbidden.℃ ℃
Design feature
Structure and materials
Pump housing seal ring
Impeller
Pump housing mouth ring
Impeller nut
Main shaft
Shaft spacer seal ring
Pump housing
Pump cover
bearing
Rotary assembly
Spacer sleeve assembly
External manget
Bracket
Fluorubber
Fluoroplastic alloy
Silicon nitride
Fill F4
Silicon carbide
Fluorubber
HT200 lined with F46
HT200 lined with F46
Fill F4
F46 /NdFeB
HT200 /NdFeB
HT200
F46 / Reinforced carbon fibere
Pump housing seal ring
Impeller
Pump housing mouth ring
Impeller nut
Main shaft
Shaft spacer seal ring
Pump housing
Pump cover
bearing
Rotary assembly
Spacer sleeve assembly
External manget
Bracket
Pedestal
Fill F4
Fluoroplastic alloy
Silicon carbide
Fill F4
Silicon carbide
Fill F4
HT200 lined with F46
Fluoroplastic alloy
Fill F4
F46 /NdFeB
HT200 /NdFeB
HT200
F46 / Reinforced carbon fibere
HT200
WOLONG WOLONG