costco wholesale toys/ hardlines product ion test …
TRANSCRIPT
Page 1 of 33
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
COSTCO WHOLESALE
TOYS/ HARDLINES
PRODUCTION TEST REPORT
LAB LOCATION: DONG GUAN, CHINA REPORT NUMBER: 63113-09010
DATE IN: December 02, 2013 DATE OUT: December 13, 2013
Costco QA Project Person: Frank OVERALL RATING
Applicant: Lifetime Products Inc
Department: 27 Lawn Garden PASS X
FAIL --
Address : PO Box 160010 Clearfield, UT 84016
E-mail: [email protected] Note: Rating based on laboratory tests. Final disposition determined by Costco. Copy To:
[email protected]; [email protected] [email protected]
TESTING FOR
FN - 022 – Costco Global Quality Outdoor Tables Protocol / FN - 058 – Costco Global General Outdoor Seating Protocol
/ SP - 000.4 – Costco Regulatory Furniture Protocol / SP - 100 - US / CN / UK Verify Master Carton Markings / PK-001 - Packaging
Performance Test / PK-900 Transit Test - ISTA 1A / 1B / SP - 014 - US – Costco CPSIA New Requirements / US Toxics in Packaging
Clearing House (TPCH) / Transit Test – ISTA 3B
Sample Information Item is CPSIA Regulated for US bound good (Including Mexico Depot 929)?
YES NO Inconclusive
If YES: CPSIA Regulations have been tested in this report. Refer to tests below.
Product includes Digital Devices? NO Yes - If YES, must fulfill either one of the following:
FCC/IC testing & labeling review is required OR
Exempted from FCC/IC (Vendor provided with declaration form – See attachment)
Not sold to USA / Canada
Sample Submitted By: Costco Vendor
Sample Selected by Third Party Lab: Yes No
63113-09010
Inspection Pull Test:
Done in Lab Test: Inspection Report No.:/
Purchase Order Number: /
Product Description: 6ft WFrame Picnic Table
With Packaging Without Packaging
Costco Item Number: 468475
Costco QA Code#: 52571304
Model Number: /
Assortment: no
Vendor: Lifetime Products Inc
Factory/Location: Lifetime Plastic Product Ltd / Fujian, China
Country of Destination: US / US.COM
Country of Origin: China
No. of Samples Submitted: 6 Boxes
Ship Date: 1/22/14
For and on behalf of
Modern Testing Services (Dongguan) Limited
_______________ LAU Kwok Ping, Leo Manager, Hardlines
Page 2 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Testing Status
Production Warehouse Pull
Retest Previous Report No.:
Revised Report: Reason for revision:
Amended Report Reason for addendum:
Rating Fed/State Regulation
Voluntary Standards
Costco Standards
Product Specifications
Test Property PASS FAIL Non-Compliance (Check All That Apply)
Labeling (Label Review) X -- -- -- -- --
Product Specifications X -- -- -- -- --
Construction Qualities X -- -- -- -- --
Performance X -- -- -- -- --
Flammability X -- -- -- -- --
Lead Test X -- -- -- -- --
TPCH X -- -- -- -- --
Packaging Performance X -- -- -- -- --
Other (Costco Plastic Bag Warning Statement)
X -- -- -- -- --
Executive Summary:
Protocol Tested Rating
FN - 058 – Costco Global General Outdoor Seating Protocol PASS
FN - 022 – Costco Global Quality Outdoor Tables Protocol PASS
SP - 014 - US – Costco CPSIA New Requirements PASS
SP - 000.4 – Costco Regulatory Furniture Protocol PASS
SP - 100 - US / CN / UK Verify Master Carton Markings DATA
US Toxics in Packaging Clearing House (TPCH) PASS
PK-001 Packaging Performance Test PASS
PK-900 Transit Test - ISTA 1A / 1B PASS
PK-907 Transit Test – ISTA 3A Not Request
Transit Test – ISTA 3B PASS
PK-066 Master Carton Compression Not Request
Page 3 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
1. Claimed Verification. (PASS)
Claim on the package Actual record Comment
72in x 30in x 29.75in 72in x 18-5/8in
PASS
GW:43.8kg NW:38.5kg
PASS
6 ft folding picnic table PASS
2. Product Specifications. (PASS)
Claimed on product specifications Actual Recorded Comment
GW: 43.09kg / 95lb NW: 37.6kg /82.89lb
GW:43.8kg NW:38.5kg
PASS
Part 1: Table Top / 1 Raw material: HDPE Dimensions/weight: L72” (182.88cm) x W30” (76.2cm) /6.4kg/14.1lb
Part 1: Table Top / 1 Raw material: PE Dimensions/weight: L72in x W30in /6.58kg
PASS
Part 2: Bench / 2 Raw material: HDPE Dimensions/weight: L72” (182.88cm) x W9” (22.86cm) /4.6kg/10.141lb (2 benches)
Part 2: Bench / 2 Raw material: PE Dimensions/weight: L72in x W9in (22.86cm) /4.68kg/ (2 benches)
PASS
Part 3: frame, assembly 1 Raw material: Mild steel (Low carbon c1008 steel) Dimensions/weight: 26.6kg / 58.5lbs
Part 3: frame, assembly 1 Raw material: Cannot be verified) Dimensions/weight: 27.28kg
PASS
Part 4: Hardware, screw, bolt & nut (16) Finish: Zinc plated. Raw material: Mild steel (Low carbon c1008 steel) Dimensions/weight: m6 screw 0.08kg (0.176lbs)
Part 4: Hardware, screw, bolt & nut (16) Finish: Zinc plated. Raw material: Cannot be verified M6 (Cannot be verified) Dimensions/weight: screw 0.08kg
PASS
Part 5: End cap (8) Raw material: Nylon 66 Dimensions/weight: Diameter 1.25” (3.175cm) 0.030kg (0.066lbs)
Part 5: End cap (8) Raw material: Nylon Dimensions/weight: Diameter 1-1/4in (0.030kg )
PASS
Page 4 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Remark: 1. It should be noted that pull sample was selected by MTS. (See Exhibit A1-A2)
Exhibit A1 (selected by MTS) Exhibit A2 (selected by MTS)
2. Only label review and transit test (ISTA 3B) were performed, all other test results are transferred from 63113-09011 (Mexico order).
3. Due to under estimation on the sample quantity required for testing during sample selection, the following sample was requested by MTS and re-submitted by the vendor: - 1 set ISTA 3B sample
Test Result:
Refer to the protocol pages and the following result:
COMPONENT BREAKDOWN LIST:
Test Item Component Description
A 6ft WFrame Picnic Table
A1 Dark brown coating ( On metal frame )
A2 Black plastic ( End cap ) ( Client claimed as Nylon )
A3 Beige plastic ( Table top ) ( Client claimed as HDPE )
A4 Beige plastic ( Bench ) ( Client claimed as HDPE )
A5 Light blue metal ( Screw ) ( Client claimed as Zinc plated )
B Packaging
B1 Multicolor coating ( On poster )
B2 Black / orange coating ( On warning label )
B3 White paper ( Excluding coating ) ( Poster )
B4 Khaki paper with black printing ( Retail carton )
B5 White paper with adhesive backing ( Excluding coating ) ( Warning label )
B6 Khaki paper with black printing ( Master carton )
Page 5 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Test Item Component Description
B7 Khaki paper ( Cardboard )
B8 White paper with black printing and adhesive backing ( Label )
B9 White paper with black printing ( Instruction sheet )
B10 Silvery metal ( Staples )
B11 White plastic ( Foam )
B12 Transparent plastic with adhesive backing ( Adhesive tape )
B13 Transparent plastic with black printing ( Big poly bag )
B14 Transparent plastic ( Big / small poly bag )
B15 Grey plastic ( Banding strap )
1. Total Lead Content in Paint or Similar Surface Coating – U.S. CPSC 16 CFR 1303
Test Item Accessibility (Remark 1)
Classification Total Lead (Pb) (ppm)
Conclusion Result Limit
A1 Accessible as
received Paint or similar surface
coating <10 90 PASS
Method: 1) Lead in paint and other similar surface coatings:
The test is conducted according to the US CPSC Standard Operating Procedure for Determining Lead (Pb) in Paint and Other Similar Surface Coatings, April 26, 2009 (CPSC-CH-E1003-09.1)
2) Lead in metals: The test is conducted according to the US CPSC Standard Operating Procedure for Determining Total Lead (Pb) in Children’s Metal Products (Including Children’s Metal Jewelry), December 4, 2008 (CPSC-CH-E1001-08.2)
3) Lead in other non-metal materials including plastics, glass and leather material: The test is conducted according to the US CPSC Standard Operating Procedure for Determining Total Lead (Pb) in Non-Metal Children’s Products, February 1, 2009 (CPSC-CH-E1002-08.1)
Remark: 1) The accessibility of the submitted sample after use and abuse is verified according to 16 CFR 1500.87 (e)
to (h). Note: ppm = part per million = mg/kg (milligram per kilogram) “<” = less than 2. Material Identification by Fourier Transform Infrared Spectroscopy
Test Item Result #A2 Nylon ( PA ) #A3 Polyethylene ( PE ) #A4 Polyethylene ( PE )
Method: The material is analyzed by Fourier Transform Infrared Spectroscopy (FT-IR) with or without
solvent extraction
Page 6 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
3. Toxics in Packaging – Model Toxics in Packaging Legislation of the Toxics in Packaging Clearinghouse (TPCH)
Test Item Result – Total Heavy Metals (mg/kg)
Conclusion Pb Cd Cr (VI) Hg Total
B1+B2 <10 <10 <10 <10 <40 PASS
B3+B4+B5+B6 <10 <10 <10 <10 <40 PASS
B7+B8+B9 <10 <10 <10 <10 <40 PASS
B10 <10 <10 <10 <10 <40 PASS
B11+B12+B13+B14+B15 <10 <10 <10 <10 <40 PASS
Limit 100 -
Pb = Lead, Cd = Cadmium, Cr (VI) = Chromium (VI), Hg = Mercury Method: Sample was digested completely and tested by EPA 3052. Note: mg/kg = milligram per kilogram “<” = less than 4. Test(s) in California Proposition 65 [SP-572-US](Protocol constructed accordingly to various
Consent Decrees)
Remark: Not applicable for the submitted sample.
5. Material Identification
Test Item A5
Majority metal Result (%)
Substrate Fe >95
Plating Zn Present
Method: With reference to ASTM E1476-04, the material composition was determined by energy dispersive X-ray fluorescence (EDXRF) spectrometer.
Note: % = percentage “>” = more than
Page 7 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit for TPCH
Exhibit 1. (Item B1, B3, B4) Exhibit 2. (Item B2, B5)
Exhibit 3. (ItemB6) Exhibit 4. (Item B7)
Exhibit 5. (Item B8) Exhibit 6. (Item B9, B10)
Page 8 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 7. (Item B11) Exhibit 8. (Item B12)
Exhibit 9. (Item B13) Exhibit 10. (Item B14)
Exhibit 11. (Item B15)
Page 9 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Transit Test - ISTA 1A Test Method: Total 14,200 vibratory impacts were performed to the master carton in normal position, and 90/180 degree horizontal rotation after half of vibration completed. After vibration test, 10 drops on master carton were conducted from a specific height in the following sequential drop identification: Drop 1: Most fragile corner or corner at manufacturing joint. Drop 2: Shortest edge radiating from that corner. Drop 3: Next longest edge radiating from that corner. Drop 4: Longest edge radiating from that corner.
Drop 5: Flat on one of the smallest faces Drop 6: Flat on the opposite small face. Drop 7: Flat on one of the medium faces. Drop 8: Flat on the opposite medium face. Drop 9: Flat on one of the largest faces. Drop 10: Flat on the opposite large face. Test Details: Total vibration impacts: 14200 Vibration in normal position: 29 minutes at 251 rpm Vibration after 180 degree horizontal rotation: 29 minutes at 248 rpm Height of drop: 12 inches
Test Requirement: Sample shall without the following “significant” damage after transit test: a. Structural or functional damage of the product. b. Aesthetic damage of the product. c. Aesthetic damage of the package, except caused by Drop#1. d. Disorientation of the product in the package. e. Abrasion of the package. Result: No noticeable damage was found on the packaged carton and product after vibration and drop test. (PASS)
Page 10 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
(A) Description of Package:
1. The product is placed into a master carton which is made of double wall corrugated carton board, sealed by adhesive tape and tied by plastic strap. (See Exhibit 1 to 4 & 34)
2. Inside the master carton, instructions, hardware pack, two Styrofoam blocks and two benches are put on the top. Two W-Frame leg braces are packed by poly bag. One table top is placed on the bottom. (See Exhibit 5 to 14 & 25 to 33)
3. Inside the inner carton, two W-Frame legs are protected by Styrofoam and cardboard or shrunk film. (See Exhibit 15 to 24)
(B) Weight and Dimension of the master carton: Length: 73-1/4 inches Width: 30-1/2 inches Height: 7-3/4 inches Weight: 95.7 lbs
ISTA 1A Exhibit:
Exhibit 1. Exhibit 2.
Exhibit 3. Exhibit 4.
Page 11 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 5. Exhibit 6.
Exhibit 7. Exhibit 8.
Exhibit 9. Exhibit 10.
Page 12 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 11. Exhibit 12.
Exhibit 13. Exhibit 14.
Exhibit 15. Exhibit 16.
Page 13 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 17. Exhibit 18.
Exhibit 19. Exhibit 20.
Exhibit 21. Exhibit 22.
Page 14 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 23. Exhibit 24.
Exhibit 25. Exhibit 26.
Exhibit 27. Exhibit 28.
Page 15 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 29. Exhibit 30.
Exhibit 31. Exhibit 32.
Exhibit 33. Exhibit 34.
Page 16 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
(C) BURSTING STRENGTH OF MASTER CARTON Test Method: With Reference to TAPPI T810 om-06 Clause 7.2 (See Remark) Test Data:
Sample Burst Position
Burst 1 (kg/cm2)
Burst 2 (kg/cm2)
Burst 3 (kg/cm2)
Average (kg/cm2)
Carton board Face Side 7.12 6.70 6.90 6.91
Back Side 6.57 7.85 7.32 7.25
Remark:
The test method is modified as below: Sample was conditioned in 21 0C and 65% in relative humidity for 24 hours before test. (D) GRAMMAGE OF MASTER CARTON Test Method: Standard measurement. Test Data: 600 g/m2 Remark: It should be noted that the pull sample was selected by MTS. (See Exhibit A).
Exhibit A
Page 17 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Packaged Product Transit Testing ISTA 3B
Test Requirement: No significant damage on the product(s) and the master carton. Test Details:
Standard-Flat Packaged Product Test Atmospheric preconditioning: Ambient for at least 12 hours Drop test: 6 drops – Height varies with packaged-product weight Random vibration test (With top load): Overall Grms levels of 0.54 Drop test: 6 drops – Height varies with packaged-product weight Full rotational drop and concentrated edge impact Test.
Test Result: After a series of Free-Fall drop, Random Vibration Test, Free-Fall drop, full rotational drop and concentrated edge impact Test, no noticeable damage was found on the products and packaged carton. (PASS)
Description of Package:
4. The product is placed into a master carton which is made of double wall corrugated carton board, sealed by adhesive tape and tied by plastic straps. (See Exhibit 1 to 3 & 35)
5. Inside the master carton, instructions, hardware pack, two Styrofoam blocks and two benches are put on the top. Two W-Frame leg braces are packed by poly bag. One table top is placed on the bottom. (See Exhibit 5 to 14 & 28 to 34)
6. Inside the inner carton, two W-Frame legs are packed by poly bag, protected by Styrofoam and cardboard. (See Exhibit 15 to 27)
Weight and Dimension of the master carton: Length: 73-1/4 inches Width: 30-1/2 inches Height: 7-3/4 inches Weight: 96.4 lbs
Page 18 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit:
Exhibit 35. Exhibit 36.
Exhibit 37. Exhibit 38.
Exhibit 39. Exhibit 40.
Page 19 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 41. Exhibit 42.
Exhibit 43. Exhibit 44.
Exhibit 45. Exhibit 46.
Page 20 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 47. Exhibit 48.
Exhibit 49. Exhibit 50.
Exhibit 51. Exhibit 52.
Page 21 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 53. Exhibit 54.
Exhibit 55. Exhibit 56.
Exhibit 57. Exhibit 58.
Page 22 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 59. Exhibit 60.
Exhibit 61. Exhibit 62.
Exhibit 63. Exhibit 64.
Page 23 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 65. Exhibit 66.
Exhibit 67. Exhibit 68.
Exhibit 69.
Page 24 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
BURSTING STRENGTH OF MASTER CARTON Test Method: With Reference to TAPPI T810 om-06 Clause 7.2 (See Remark) Test Data:
Sample Burst Position Burst 1(kg/cm2) Burst 2(kg/cm
2) Burst 3(kg/cm
2) Average(kg/cm
2)
Carton board Face Side 6.91 7.32 6.87 7.03
Back Side 8.01 6.63 7.66 7.43
GRAMMAGE OF MASTER CARTON
Test Method: Standard measurement. Test Data: 610 g/m
2;
Page 25 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit for Quality and Labeling Test:
Exhibit 1. (Product review) Exhibit 2. (Support review)
Exhibit 3. (Master carton) Exhibit 4. (Master carton)
Exhibit 5. (Master carton) Exhibit 6. (Master carton)
Page 26 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 7. (Master carton) Exhibit 8. (Master carton)
Exhibit 9. (Information on packaging) Exhibit 10. (Information on packaging)
Exhibit 11. (Information on packaging) Exhibit 12. (UPC & Costco item number)
Page 27 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 13. (Information on packaging) Exhibit 14. (Information on packaging)
Exhibit 15. (Information on packaging) Exhibit 16. (Information on packaging)
Exhibit 17. (Information on packaging) Exhibit 18. (Information on packaging)
Page 28 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 19. (Information on packaging) Exhibit 20. (Information on packaging)
Exhibit 21. (Information on packaging) Exhibit 22. (Information on packaging)
Exhibit 23. (Label on the product) Exhibit 24. (Label on the product)
Page 29 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 25. (Label on the product) Exhibit 26. (Logo on product)
Exhibit 27. (Instruction) Exhibit 28. (Plastic bag)
Exhibit 29. (After corrosion test / 48hours) Exhibit 30. (After corrosion test / 48hours)
Page 30 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 31. (After corrosion test / 48hours) Exhibit 32. (After corrosion test / 48hours)
Exhibit 33. (After corrosion test / 48hours) Exhibit 34. (After corrosion test / 48hours)
Exhibit 35. (After corrosion test / 48hours) Exhibit 36. (After corrosion test / 48hours)
Page 31 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 37. (After corrosion test / 48hours) Exhibit 38. (After corrosion test / 48hours)
Exhibit 39. (Low carbon c1008 steel)
Page 32 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
Exhibit 40. (Low carbon c1008 steel)
Page 33 of 33 Report Number: 63113-09010
东莞现代产品整理服务有限公司 Modern Testing Services (Dongguan) Limited. 广东省东莞市寮步镇新旧围村良平路 76号 No.76, Liang Ping Lu, Xin Jiu Wei Cun, Liaobu, Dongguan, Guangdong, China
Tel: (86)769 8112 0818 Fax: (86)769 8112 0815 E-mail: [email protected] Website: www.mts-global.com
USA˙̇̇̇Hong Kong˙̇̇̇Shanghai˙̇̇̇Dongguan˙̇̇̇Taiwan˙̇̇̇India˙̇̇̇Bangladesh˙̇̇̇Indonesia˙̇̇̇Germany˙̇̇̇UK˙̇̇̇Turkey˙̇̇̇Cambodia˙̇̇̇Vietnam˙̇̇̇Korea˙̇̇̇Pakistan˙̇̇̇Egypt˙̇̇̇Thailand
NOTE:
If there is question or concern regarding the above results, please contact the appropriate lab person below: General question & concern: CAO Yan, Joy Customer Service Representative (86)769 8112 0818 Ext. 852 [email protected]
Technical question & concern: LAU Kwok Ping, Leo Manager (86)769 8112 0818 Ext. 816
The testing lab overall rating is provided to client as an aid in reviewing report data. The rating is based on lab results. Final product acceptance or rejection is per client only. Testing of vendor’s merchandise by client is not a substitute for vendor’s own testing and other quality assurance related obligations in connection with its sale of merchandise to client. Client testing shall not limit client’s rights, or diminish or remove any of vendor’s responsibilities.
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
SP-000.4
X Refer SP-000.4
SP - 011
-- --NA
No fabric
SP - 405
-- -- NA
* Indoor/Outdoor Upholstery/ Non Upholstery Fabric (Ifapplicable)
Must comply with requirements (Use ProtocolSP -011)
Result Reviewed by: LL
REQUIREMENT
Scope: This protocol should be used for these item types: Bed (Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
(A) Supplemental Protocol
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
* Outdoor Gas Fire Chart Must comply with requirements (Use ProtocolSP -405)
* Country SpecificRegulatory SupplementalProtocol
Must Comply With Requirements
ZTS MTS Report Number: 63113-09010
Lab Method
-- -- NR
Lab Method
-- -- NR
Visual
XItem number: 468475UPC: 841101001509
(B) Common Test
Note: Additional cost, sample size & TAT may be required if testing to 1 or more supplemental protocol is necessary.
Please refer to the above referenced supplemental protocol(s) for additional information.
B1. LABELING
Item number verification Must be present and list UPC and item numberper Costco Wholesale. Report placement andverify if placement meets any specifications.
RSL
* Costco RSL Core testingrequirement
The sample should be reviewed against therequirements of the Costco RSL Core testingrequirement to determine if additional testing orlabeling is required.
Note:- This supplemental testing will be done BYREQUEST ONLY.- When this supplemental is conducted, pleaseDO NOT perform the same Analytical tests inthe individual product protocol.
This is a Costco requirement
* Certificate ofAcknowledgement andAgreement
Supplier must provide completed Certificate ofAcknowledgement and Agreement (RSLCERTIFICATE OF ACKNOWLEDGEMENT ANDAGREEMENT) as part of the RSL policy.
** Attach to end of the report.This is a Costco requirement
Latest revision: 30 Apr, 2013 Page 1 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
Visual
X
Warning Symbols on MasterCarton
ITEM./ART. ?????COSTCO P.O. #GW______kg, ______lbNW______kg, ______lb_________m3______cbfMADE IN ????? (CHINA)FABRIQUÉ EN ????? (CHINE)HECHO EN ?????? (CHINA)Report if present and the location or locations ofthe Master CartonReport as DATA If no markings are present.
CWCCWC
Costco SilicaGel PackStatement
-- -- NA
EN 581-3 foroutdoor table
-- --NA
Ship to USA
H-20001
XSee ExecutiveSummary 1
H-20001X
See ExecutiveSummary 1
Weight (Kgs / lbs) Report overall weight; shall meet label claims (-0%; +3%).
Dimensions (L x W x H)B2. PHYSICAL CHARACTERISTICS
Instruction for use (section 7) Shall be headed "IMPORTANT, RETAIN FORFUTURE REFERENCE: READ CAREFULLY" inletters no less than 5 mm high.- Name and address of the producer (manufacturer or supplier);- information regarding maintenance;- For tables which are not intended to support a parasol , a warning that a parasol shall not be placed on it, or shall be used with a separate base;- Conditions for use of the product (camping, domestic or contract).
Report as DATA If no markings are present.FAIL If the master carton markings are suppliedbut incorrect.
UK
Silica Gel Pack Statement The following statements in English, French,Spanish shall be printed on silica gel pack.
Desiccant drying packet. Discard with care.Paquet Dessicatif. En disposer prudemment.Saco con preparación descecante para evitarhumedad.Remover con cuidado.
Report overall dimensions; shall meet labelclaims (-0%; +3%).
Summary 1
H-20001-- -- Non adjustment
Leg Height Adjustment Report Actual; shall meet label claims (-0%;+3%). Latest revision: 30 Apr, 2013 Page 2 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
H-10004
X Comply with parts list
H-10004
-- -- 44.75mm dia
H-10004-- -- Record: 0
H-10004-- -- Record: 0
Number of Stops Report Actual; shall meet label claims.
Umbrella Hole Diameter Report Actual; shall meet label claims (-0%;+3%). (Report all the holes diameter and with orW/O inserts)
Number of Drawers Report Actual; shall meet label claims.
Accessories Report All submitted accessories such ascarrying bags, carrying straps, pouches, holecovers, end caps, casters, levelers, drawerglides, drawer stops, mounting hardware, hooks,pegs, hardware provided, anchors, etc... Shallcomply with any claims.
-- -- Record: 0
H-10004-- -- Record: 0
H-10004-- -- Record: 0
H-20001-- --
NANo keyboard tray
H-10004
X
H-10004
X
H-10004
X
Visual
X
Visual -- -- Metal, plastic
Visual -- -- Surface coating
B3. CONSTRUCTION QUALITIES
Type of Material
Type of Finishing Report actual, Shall meet Specific claimed
Shall have no components missing, malformed,and/or fractured. Shall not wobbling when placeon the flat surface.
Wobbling in use/Level No wobbling in use when place on the flat glasssurface.
After visual evaluation of all metal-metal weldsthat are visible after assembly, report subjectivescale the weld quality. (0 Is worst possible, 5 isbest possible)
Quality of Welds
Keyboard Tray Size Report Actual; shall meet label claims (Ifapplicable within -0%; +3%).
Report Actual; shall meet label claims.
Number of Shelves Report Actual; shall meet label claims.
Number of Doors
Report actual, Shall meet Specific claimed
Workmanship
Defects Shall have no discernible surface degradation,including crazing, shivering, denting, bubbles,cracks, stains, deformations, chips, fractures,heavy lines, waves, shear marks, scratches,scuff marks, indentations, or blisters.
Latest revision: 30 Apr, 2013 Page 3 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
CostcoWholesale
XSee ExecutiveSummary 2
H-10004
-- --NA
All applicable physical characteristics (i.eLength, Width, height, weight, thread count) areto be reported in the physical characteristicssection of this protocol. If product spec aresupplied, then the information on thespecifications for each of these physicalcharacteristics only must be reported here andindicated as conforming to the actual sample. Ifthere is a difference between the actual sampleand the specification then this difference mustbe reported.
Report if Marble or stone surface is uniformlypolished with no abrasive areas or pits on
Marble/Stone
Product Specifications
-- --NA
No marble / stone
H-10004
-- -- No glass
H-10004
-- -- No glass
H-10004
-- -- No glass
H-10004
-- -- No glass
BS EN 581-1: 2006clause 5.1modified
X
* Glass top Fit
The edges and corners which are directly incontact with the user shall be rounded orchamfered.
All other edges and corners accessible duringuse shall be free from burrs or/and sharp edges.
Modification = expanded scope to other regionsand both indoor / outdoor products
Edges and corners
Must have Uniform spacing on all edgesbetween glass and Frame. (Report ChannelWidth on all sides).
* Tempered Glass Report if glass is tempered or non-tempered.(I.e. Broken Glass has rounded edges).
* Glass top thickness (mm)Encased
< 4.6 mm, Tempered Glass Required; > 4.6 mmtempered glass not required.
polished with no abrasive areas or pits onsurface.
* Glass top thickness (mm)Raw edges
< 7.6 mm, Tempered Glass Required; > 7.6 mmtempered glass not required.
Latest revision: 30 Apr, 2013 Page 4 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
BS EN 581-1: 2006clause 5.2modified
X
Tubular components - holesand gaps accessible duringuse
Tubular components, holes and gaps accessibleduring use shall be covered if a 7 mm or 12 mmtest probe (Clause 4) can be pushed into them inany direction with a maximum force of 30 N(6.6lbs) to a depth of more than 10 mm andcannot be pulled out again in the reversedirection by a maximum force of 30 N (6.6lbs)..Bottom of tubular legs shall be capped orplugged.
Modification = expanded scope to other regionsand both indoor / outdoor products
BS EN 581-1: 2006clause 5.3.1modified
X
BS EN 581-1: 2006clause 5.3.2modified
-- --NA
No poweredmechanism
Shear and squeeze pointswhen setting up and folding
Unless 5.3.2 or 5.3.3 are applicable, shear andsqueeze points that are created only duringsetting up or folding are acceptable providing theuser can be assumed to be in control of his/hermovements and to be able to cease applying theforce immediately on experiencing pain.
The edges of parts moving relative to each otherand creating shear and squeeze points shall beas specifiedin 5.1.
Modification = expanded scope to other regionsand both indoor / outdoor products
There shall be no accessible shear and squeezepoints created by parts of the furniture operatedby poweredmechanisms, e.g. mechanical springs, gas lifts.
Modification = expanded scope to other regionsand both indoor / outdoor products
Shear and squeeze pointsunder the influence ofpowered mechanisms
Latest revision: 30 Apr, 2013 Page 5 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
BS EN 581-1: 2006clause 5.3.3modified All
X
Shear and squeeze pointsduring use
There shall be no accessible shear and squeezepoints created by loads applied during normaluse.
For seating, the loads applied during normal usecan be found in ENV 581-2, and for tables in EN581-3.
Shear and squeeze points are not acceptable ifa hazard is created by the weight of the userduring normal movements and actions, e.g.attempting to move the seating by lifting the seator by adjusting the backrest.
Modification = expanded scope to other regions
H-10004X
H-41012
X Test for all components
H-41012
-- -- NR
Modification = expanded scope to other regionsand both indoor / outdoor products
B4. PERFORMANCE
* Effects of extremetemperature change(Bathroom Use)(By Request Only)
Functionality (If Appropriate) Shall function as intended as received
BATHROOM USE, EXTENDED TESTING:Two 24 Hours at -32° F and 140° F - No failureor visual change (Report piece/section/ wholeunit placed in Chamber) Note: Whenpieces/Section were tested, to be sure the
tested part should be properly
cover/protected in cutting process.
24 Hours at -32° F and 140° F - No failure orvisual change (Report piece/section/ whole unitplaced in Chamber) Note: Whenpieces/Section were tested, to be sure the
tested part should be properly
cover/protected in cutting process.
Effects of Extremetemperature
Latest revision: 30 Apr, 2013 Page 6 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
ASTM B117-07 modified /CostcoWholesaleRequirement
XOutdoor use
Test for all metalcomponents
Resistance to Corrosion -Metal Products orComponents
TEST LAB: Before proceeding, refer to Costco “Test and Inspection Request Form” (TRF) –Page 1 “Product Use” section. If “INDOOR USE” selected on the TRF, performcorrosion testing as below:-Shall withstand 24 hours in 1% salt spray (fog)with no corrosion or visual changeModification = 1% salt fog spray. If “OUTDOOR, GARAGE, BATHROOM USE”selected on TRF, or when there is a claim orpicture of outdoor, garage or bathroom usemade on the product, packaging, specificationsor other documents perform as below:
XOutdoor use
Test for all metalcomponents
or other documents perform as below:-Shall withstand 48 hours in 1% salt spray (fog)with no corrosion or visual changeModification = 1% salt fog spray. NOTE ON 48 HOURS SALT SPRAY TESTING:Costco requires reporting at 2 stages as follows.Report shall document results at 24 hours AND48 hours.
Resistance to Corrosion -Metal Products orComponents (Continued)
CUTTING OF TEST SAMPLES: Costco DOESNOT permit cutting or dismantling of samples forcorrosion testing. If cutting or dismantling isunavoidable due to product type, size or shape,this must be recorded. If cut, sample shall becompletely covered to prevent metal shavingcontamination. If pieces/sections were tested,list which pieces/sections, indicate pass or failfor each piece/section, and include before andafter pictures of each piece/section. Item shallbe placed in test chamber in a manner that mostclosely resembles orientation during INTENDEDUSE. VISUAL CHANGES: Report whether the productshows tarnishing or rusting (and the color) asdefined:Tarnishing = Discoloration of the finish over themetal (usually on copper, brass, silver andaluminum)Oxidization/Rust = Usually a powdery substancethat can be easily flaked off ( Fe = red, Cu =green, Al = white) REPORTING OF FAILURES: Only REDRUSTING shall be reported as a failure.(photograph ALL visual changes in report) DISPOSABLE ASSEMBLY TOOLS: One-Time-Use tools provided by manufacturers forassembly (such as hex or open ended wrench)shall not be tested.Latest revision: 30 Apr, 2013 Page 7 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
H-41007
X Test for all components
H-41007
Effect of Humidity
BATHROOM USE, EXTENDED TESTING:No change after 48 hours @ 95% RH and 100degrees F - also report if entire item was placedin the chamber or if only certain pieces/sections.If pieces/sections were tested, list which pieces
No Change after 24 Hours at 95% RH and 100 °F - Also. If pieces/sections were tested, listwhich piece/section, indicate pass or fail for eachpiece/section, and include before and afterpictures of each piece/section. Note: Whenpieces/Section were tested, to be sure the
tested part should be properly
cover/protected in cutting process.
* Humidity exposure(Bathroom Use) (By RequestOnly)
-- -- NR
ASTMD3359B(Mod)
X
H-41015
X Oil, sauce, mastard
H-41055X
H-41063
-- --NA
No wood
Actual use
X
Resistance to scratchingother surfaces
Stain Resistance ( Do nottest on any outdoor solidwood: Furniture / outdoorracks / picnic table / benches/ storage racks)
If pieces/sections were tested, list which piecesand include before and after pictures of thepieces.Modification = Exposure time changed from 24hours to 48 hours; relative humidity changedfrom 88% to 95%;temperature changed form 90 degrees F to 100degrees F. Note: When pieces/Section weretested, to be sure the tested part should be
properly cover/protected in cutting process.
* Cross Cut Adhesion [NOT APPLICABLE TO WOOD]
All the surface finish/coating must stay affixed-Cut a grid of 16 squares by using utility knife andapply the 3M masking tape (#202) to the grid.The surface finish/plating must remain intactafter the tape were removed.
Moisture Content ( SolidWood Products)
Should resist permanent staining - Various foodmaterials (list food used).
No Scratching of surface – 3 cycles of 6” backand forth.
Within equilibrium point of 8% - 12 %. (ReportComponents measured, Legs; Bottom of tabletop; Apron)
Cycle test - movingcomponents - drawersor doors or keyboard trays ordrop leaf or
100 times / cycles use of moving components –no failure and all components must have andmaintain a smooth uniform movementthroughout each cycle. (All functional parts must Xdrop leaf or
locking devicethroughout each cycle. (All functional parts mustbe evenly aligned at the start of the test andremain evenly aligned.)Latest revision: 30 Apr, 2013 Page 8 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
Fed. SpecAA-H-001895B-80section4.4.1.2
X
Actual Use
X #409
Tensile Force
X
Shall result in no adverse change to surface.Spray solvent onto surface and leave for 15seconds. Wipe with non marring pad (3 cycles)(List the Solvent use)
Resistance to Hot Water.
Attachment Strength-CapRemoval Strength (on endtubes) or (Cap covers onScrew Ends)
Pour 25 mL of boiling water and allow cooling.Dry surface. Shall be no graying or spotting.
Effect of Cleaning Solvent(Applicable for Hardmaterials Only)
Shall not separate minimum holding force @ 5.0lbs.
Actual Use-- --
NANo caster
By Visual
-- -- See exhibit 2
Actual use
-- --NA
Product withoutshelves / drawers
Actual use
-- --NA
No drawer
Actual use
-- --NA
No drawer
Max 1/4 inch deformation @ 10 lbs distributeload/drawer(PRODUCTS WITH SHELVES/DRAWERS)
Caster Performance Max 5 lbs pull to move under 200 lbs load.
* Load capacity - drawer
Cross Sectioning Review
(A review ofsupport/reinforcements foritems that are extrudedconstruction or have internalsupport.)
* Furniture - draweroperability
Max 10 lbs pull force with 10 lbs distributeddrawer load Modification = Maximum pullingforce changed form 11.2 lbs to 10 lbs(PRODUCTS WITH SHELVES/DRAWERS)
* Loading capacity - shelf Max 1/4 inch deformation. Test load dependanton shelf width and depth: Report deformation,shelf width and load applied to shelf
<8 inch depth, (3 lbs x shelf width-inch)8-16 inch depth, (5 lbs x shelf width-inch)>16 inch depth (7 lbs x shelf width-inch)(PRODUCTS WITH SHELVES/DRAWERS)
Cut each structural support only. This mayrequire all connecting members of the product tobe cut for analysis. Provide labeled exhibitphotos of the cross sections for each support.Review and rate the cross section forconformance to product specifications. If nospecifications are supplied, then the pictures areto be supplied as documentation of the testedsample.
Note: If non-compliant with first cut, then cutfailing support a total of 3 times to ensurereinforcement meets claims.
Latest revision: 30 Apr, 2013 Page 9 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
H-41011
X
Actual use
-- --NA
No keyboard tray
16 CFR
Tilt resistance Use this section for table with all componentssuch as leaves, levelers.*If levelers are provided, test with and without levelers at additional cost.*If leaves are provided, test additionally in largest configuration at additional cost.*If both are provided, test with and without leaf & levelers in place bistro table only:Shall remain stable when tipped 8 degrees.
* Operability - keyboard tray
Flammability Shall not burn with a self-sustaining flame at a
After distributed load of 10 lbs is applied to thetray, it should open with a maximum 5 lbs pullforce(PRODUCTS WITH SHELVES/DRAWERS)
16 CFR1500.44 X
BS EN 581-1
X
BS EN 581-1
X
Outdoor furniture —Seating and tables for camping, domestic and
contract use — BS EN 581 Part 1: General safety requirements and BS
EN 581 Part 3: Mechanical safety requirements and test methods for
tables
Note: If the type of product Category is not applicable to the one of the following test requirement, write down the NA on
each head title only and delete the rest of test table in test report.
1. Shear and squeeze points when
setting up and folding - Acceptable.2. Shear and squeeze points under the
influence of powered mechanisms - There shall be no accessible shear and squeeze points created by parts e.g. mechanical springs, gas lifts.3. Shear and squeeze points during use - There shall be no accessible shear and squeeze points created by loads applied during normal use.
Tubular components, holesand gaps accessible duringuse (section 5.2)
Tubular components, holes and gaps accessibleduring use shall be covered if a 7 mm or 12 mmtest probe can be pushed into them in anydirection with a maximum force of 30 N (6.6lbs)to a depth of more than 10 mm and cannot bepulled out again in the reverse direction by amaximum force of 30N (6.6lbs)Bottom of tubular legs shall be capped orplugged.
Shear and squeeze points(section 5.3)
Flammability Shall not burn with a self-sustaining flame at arate greater than 0.1 inch per second along itsmajor axis.
All Countries
Latest revision: 30 Apr, 2013 Page 10 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
BS EN 581-3
X
BS EN 581-3 There shall be no structural damage or otherdeterioration that affects safety, and the tableshall fulfill its functions.
Vertical static load test onthe table top (section 6.3.1).
There shall be no structural damage or otherdeterioration that affects safety, and the tableshall fulfill its functions.
Camping: 500 N (110lbs)Domestic: 750 N (165lbs)
Contract: 1000N (220lbs)Load: 9 x 30 s + 1 x 30 min
Vertical static load test onend extensions (section6.3.2).
-- -- NA
BS EN 581-3
X
BS EN 581-3
X
BS EN 581-3
X
Camping: 100 N (22lbs)Domestic: 200 N (44lbs)Contract: 350 N (77lbs)Load: 9 x 30 s + 1 x 30 min
Horizontal fatigue test(section 6.4).
Stability under verticalload (section 6.2.1).
The table shall not overturn Table Length Test Force Camping Domestic ContractL < 800mm 200N 200 N 200 N (44lbs) (44lbs) (44lbs)L 800 to 200 N L / 4N L-600N1000mm (44lbs) (L / 0.88lbs) (L-132lbs)L > 1000mm 200 N L / 4N 400N (44lbs) (L / 0.88lbs) (88lbs)L > 1600mm 200 N 400N 400N (44lbs) (88lbs) (88lbs)
There shall be no structural damage or otherdeterioration that affects safety, and the tableshall fulfill its functions.
Camping: Up to 50kg (110lbs) mass / test force100N (22lbs) / 5000 cycles
Domestic: Up to 50kg (110lbs) mass / test
force 150N (33lbs) / 10000 cycles
Contract: Up to 75kg (165lbs) mass / test force150N (33lbs) / 20000 cycles
Stability of tables whichare intended to support aparasol (section 6.2.2).
The table shall not overturn.
Camping: 30 N (6.6lbs) test forceDomestic: 30 N (6.6lbs) test forceContract: 30 N (6.6lbs) test forceContract: 30 N (6.6lbs) test force
Latest revision: 30 Apr, 2013 Page 11 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
-- -- NA
BS EN 1729-1 -- -- NA
BS EN 1729-1 -- -- NA
BS EN 1729-1 -- -- NA
Furniture - Chairs and tables for educational institutions
BS EN 1729 -1 Functional Dimension
BS EN 1729-2 Safety Requirements and test methods
Annex C
Functional dimensions for standing height tables
Annex B
Functional dimensions for high chairs with double-slope
seats and associated tables
Annex A
Functional dimensions for chairs with slopes between -5 °
and + 5 °and associated tables
BS EN 1729-2 -- -- NA
AppropriateAnalyticalMethod
-- -- NR
AATCC 30-- -- NR
AATCC 8
-- -- NA
AATCC 116
XDry: 4.5Wet: 4.5
AATCC 107
-- --NA
AATCC 16
X20AFU: All: 4.5
100AFU: All 4.5
B5. ANALYTICAL
Class 4.0 @ 20 AFU & Class 3.0 @ 100 AFU.Test up to 5 major / main components (notminor or small components such as plastic footcaps) of the item regardless of material (do nottest plain non-painted metal or plain non-painted/ non-stained wood such as most teak). Listeach component (By Material and/or Color) thatis tested and the final rating for each testedcomponents.
(Optional Test- By Request Only):No growth on 6x6 inch swatch
Colorfastness to crocking Min. Class 4.0 (Dry); Class 3.0 (Wet) forcrocking
CS. Class 3.0 min at the base/main surfacearea/up to 2 materials.
* Colorfastness to light(Outdoor use, hard materialonly)
* Material Identification(By Request Only)
Report actual. Shall comply with any claims.Allow 2 weeks for wood identification (Notcapable of determining regrind)
B6. COLORFASTNESS
Colorfastness to water
BS EN 1729-2 Safety Requirements and test methods
Colorfastness to rotarycrocking
* Antifungal activity on textileAATCC 30(By Request Only)
Min. Class 4.0 (Dry); Class 3.0 (Wet) forcrocking
Latest revision: 30 Apr, 2013 Page 12 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
Key:**Mandatory Requirement*Additional Charge For This Test
Note: It is the Vendor's responsibility to ensure that the products comply with all United States Federal, States,
and local laws, regulations, and ordinances. A Pass Lab test result does not constitute a certification that a
vendor's products meet all legal requirements. It is the vendor's responsibility to manufacture their items to
comply with all applicable laws and in conformance with the purchase order terms and conditions.
IMPORTANT NOTICE: Please review the Actual Products against the updated Requirements/Regulation. Prior to testing and communicate
with clients if additional test required. This protocol is the basic guidelines to follow and does not replace the content of the standard.
Appendix 1
EN 12521 Table 1 - Sequence of tests and test loads
Latest revision: 30 Apr, 2013 Page 13 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
Appendix 2
BS EN 1729-1 Functional dimensions and size marks for tables
Appendix 3
Appendix 4Latest revision: 30 Apr, 2013 Page 14 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
Appendix 5
Latest revision: 30 Apr, 2013 Page 15 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Result Reviewed by: LL
REQUIREMENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
Global Quality Outdoor Tables Protocol
(This protocol should be used for these item types: Outdoor table, for the following styles: Dining, Camping,
Occasional and Coffee Tables, Potting Bench, Storage Bench.)
FN - 022 - Costco
13-Dec-13
TESTED PROPERTY RESULTS
ZTS MTS Report Number: 63113-09010
Appendix 6
Latest revision: 30 Apr, 2013 Page 16 of 16
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
SP-000.4
X Refer SP-000.4
Note:
A. Implementation date of this protocol is Sep 01, 2012.
B. When completing stability testing on rockers for all countries (except the UK), implement the following process:
1) Complete testing following the EN requirement.
2) If a failure occurs, move to a retest using the old protocol (Test with BIFMA stanard). Inform Costco and the vendor that
MTS doing this.
3) If the item meets the old standards, nothing further will be required.
4) If the item still does not comply, report the failure for both standards.
5) This procedure will be allowed throughout 2013 testing season. After that, only the EN standard will be applied.
(A) Supplemental Protocol
* Country SpecificRegulatory SupplementalProtocol
Must Comply With Requirements
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
Scope: This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing.)
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
X Refer SP-000.4
SP-309
-- -- NA
SP-011-US
-- --NA
No fabric
TX-080
-- --NA
No seat cushion
SP-009
-- --NA
No carrying bag
SP-015
-- --NA
No leather
SP-005 -- --
NANo zipper
Lab Method
-- -- NR
* Zipper Must Comply with requirements
Must Comply with requirements
RSL
* Costco RSL Core testingrequirement
The sample should be reviewed againstthe requirements of the Costco RSL Coretesting requirement to determine ifadditional testing or labeling is required.
Note:- This supplemental testing will be done BYREQUEST ONLY.- When this supplemental is conducted,please DO NOT perform the sameAnalytical tests in the individual productprotocol.
Protocol
*Carrying Bag
* Strap testing - if applicable Must Comply With Requirements
Must Comply With Requirements
* Leather requirements
Must Comply With Requirements
* Indoor/OutdoorUpholstery/Non UpholsteryFabric
Must Comply with requirements
* Seat cushion
This is a Costco requirementLatest revision: 8 Nov 2013 Page 1 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
Lab Method
-- -- NR
Visual
* Certificate ofAcknowledgement andAgreement
Supplier must provide completedCertificate of Acknowledgement andAgreement (RSL CERTIFICATE OFACKNOWLEDGEMENT ANDAGREEMENT) as part of the RSL policy.
** Attach to end of the report.This is a Costco requirement
Item number verification Must be present and list UPC and item
Note: Additional cost, sample size & TAT may be required if testing to 1 or more supplemental protocol is necessary.Please refer to the above referenced supplemental protocol(s) for additional information.
B1. LABELING
(B) Common Test
Visual
XItem number: 468475UPC: 841101001509
Visual
X
Costco SilicaGel PackStatement
-- -- NA
Silica Gel Pack Statement The following statements in English,French, Spanish shall be printed on silicagel pack.
Desiccant drying packet. Discard with care.Paquet Dessicatif. En disposerprudemment.Saco con preparación descecante paraevitar humedad.Remover con cuidado.
Item number verification Must be present and list UPC and itemnumber per Costco Wholesale. Reportplacement and verify if placement meetsany specifications.
Warning Symbols on MasterCarton
ITEM./ART. ?????COSTCO P.O. #GW______kg, ______lbNW______kg, ______lb_________m3______cbfMADE IN ????? (CHINA)FABRIQUÉ EN ????? (CHINE)HECHO EN ?????? (CHINA)Report if present and the location orlocations of the Master CartonReport as DATA If no markings arepresent.FAIL If the master carton markings aresupplied but incorrect.
CWCCWC
Latest revision: 8 Nov 2013 Page 2 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
UKBS EN 581-2:2009Section 7.1
-- --NA
Ship to US
UKBS EN 581-2 NA
Instruction for use - General(Outdoor seating)
Instruction for use shall be provided in thelanguage(s) of the country where theseating are sold. These instructions shallbe headed "IMPORTANT, RETAIN FOR
FUTURE REFERENCE: READ
CAREFULLY" inletters no less than 5 mm high.These instructions shall include at least thefollowing:a) name and address of the producer(manufacturer or supplier);b) information regarding maintenance;c) conditions for use of the product(camping, domestic or contract).
Instruction for use - Markingfor mobile loungers
All mobile loungers not intended to be liftedand moved under the load specified inBS EN 581-2
:2009Section 7.2
-- --NA
Ship to US
H-10004
X
H-20001X
See ExecutiveSummary 1
for mobile loungers(Outdoor seating)
and moved under the load specified inTable B.1 shall be marked with a pictogramas an example is shown in Figure 1.
Design and features of the products shouldnot differ from color box pictures, enclosedinstructions, or approval sample in a waythat is misleading.
Overall Dimensions (L x W xH)
Report overall dimensions; shall meet labelclaims (-0%; +3%).
Design or featuresB2. PHYSICAL CHARACTERISTICS
Latest revision: 8 Nov 2013 Page 3 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
H-20001X
See ExecutiveSummary 1
H-20001X
Claim: 71.6in x 9inActual: 72in x 9in
H-20001X
Claim: 18.4inActual: 18-5/8in
H-20001 -- -- NA
H-20001 -- -- Non adjustment
Visual -- -- Non Tilt
Visual
Dimensions - seat (L x W)
Dimensions - height - seat Report overall weight; shall meet labelclaims (-0%; +3%).
Report overall weight; shall meet labelclaims (-0%; +3%).
Report overall weight; shall meet labelclaims (-0%; +3%).
Type of seat - rotating or Report actual. Shall comply with any
Report overall weight; shall meet labelclaims (-0%; +3%).
Total or Overall Weight (lbs)
Type of seat - tilt or non-tilt Report actual. Shall comply with anyclaims
Report overall weight; shall meet labelclaims (-0%; +3%).
Leg height adjustment
* Foam density
Visual -- -- Non rotating
Visual -- -- Without back
Visual -- -- Without arm
Visual -- -- Non caster
Visual
X Comply with parts list
Visual -- -- NA
Visual -- -- NA
Visual -- -- NA
Visual -- -- NA
Visual -- -- NA
Components - suspensiontype - frame - swings only
Arm - with or without arm Report actual. Shall comply with anyclaims
Wood Color Variation
Report actual. Shall comply with anyclaims.
Shroud over wheelMechanism - rockergliders only
All moving parts shall be protested withshroud to prevent finger entrapment.
Type of seat - rotating ornon-rotating
Report actual. Shall comply with anyclaims
Back - fixed or non-fixed
Base - caster or non-caster
Report actual. Shall comply with anyclaims.
All wood components should not have anymineral streaks/spot, water marks, no liveknots, no dead knots on front/top visiblesurfaces, or other color variations betweenindividual components or any consistentcolor variation as an entire piece such aswith “Tiger Wood”.
Safe lock
Report actual. Shall comply with anyclaims
Report actual. Shall comply with anyclaims
Report actual. Shall comply with anyclaims
Components - type ofsuspension - chain or rope -swing only
Accessories Report all submitted accessories, such asattachments or mounting hardware, etc..Shall comply with any claims.
Latest revision: 8 Nov 2013 Page 4 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
H-10004
X
H-10004
X
H-10004
B3. CONSTRUCTION QUALITIES
Defects Shall have no discernible surfacedegradation, including crazing, shivering,denting, bubbles, cracks, stains,deformations, chips, fractures, heavy lines,waves, shear marks, scratches, scuffmarks, indentations, or blisters.
Workmanship Shall have no components missing,malformed, and/or fractured. Shall notwobbling when place on the flat surface.
Wobbling in use/Level No wobbling in use when place on the flatglass surface.
Note: On multi-Position items, report dimensions when in minimum, Midpoint and maximum positions.
X
Visual
X
H-10004
X
Visual -- -- Metal, Plastic
Visual -- -- Surface Coating
CostcoWholesale
XSee ExecutiveSummary 2
Type of Finishing Report actual, Shall meet Specific claimed
Product Specifications All applicable physical characteristics (i.eLength, Width, height, weight, threadcount) are to be reported in the physicalcharacteristics section of this protocol. Ifproduct spec are supplied, then theinformation on the specifications for eachof these physical characteristics only mustbe reported here and indicated asconforming to the actual sample. If there isa difference between the actual sampleand the specification then this differencemust be reported.
Fit of Components All structural elements shall fit togetherproperly and be capable of secureassembly per included instruction.
Type of Material
glass surface.
Quality of Welds After visual evaluation of all metal-metalwelds that are visible after assembly, reportsubjective scale the weld quality. (0 Isworst possible, 5 is best possible)
Report actual, Shall meet Specific claimed
Latest revision: 8 Nov 2013 Page 5 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
BS EN 581-1: 2006clause 5.1modified
X
BS EN 581-1: 2006clause 5.2
Tubular components - holesand gaps accessible duringuse
Edges and corners The edges and corners which are directlyin contact with the user shall be rounded orchamfered.
All other edges and corners accessibleduring use shall be free from burrs or/andsharp edges.
Modification = expanded scope to otherregions and both indoor / outdoor products
Tubular components, holes and gapsaccessible during use shall be covered if a7 mm or 12 mm test probe (Clause 4) canclause 5.2
modified
X
BS EN 581-1: 2006clause 5.3.1modified
X
BS EN 581-1: 2006clause 5.3.2modified -- -- NA
use
Shear and squeeze pointsunder the influence ofpowered mechanisms
There shall be no accessible shear andsqueeze points created by parts of thefurniture operated by poweredmechanisms, e.g. mechanical springs, gaslifts.
Modification = expanded scope to other
Shear and squeeze pointswhen setting up and folding
Unless 5.3.2 or 5.3.3 are applicable, shearand squeeze points that are created onlyduring setting up or folding are acceptableproviding the user can be assumed to be incontrol of his/her movements and to beable to cease applying the forceimmediately on experiencing pain.
The edges of parts moving relative to eachother and creating shear and squeezepoints shall be as specified in 5.1.
Modification = expanded scope to otherregions and both indoor / outdoor products
7 mm or 12 mm test probe (Clause 4) canbe pushed into them in any direction with amaximum force of 30 N (6.6lbs) to a depthof more than 10 mm and cannot be pulledout again in the reverse direction by amaximum force of 30 N (6.6lbs).Bottom of tubular legs shall be capped orplugged.
Modification = expanded scope to otherregions and both indoor / outdoor products
Modification = expanded scope to otherregions and both indoor / outdoor productsLatest revision: 8 Nov 2013 Page 6 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
BS EN 581-1: 2006clause 5.3.3modified All
X
Shear and squeeze pointsduring use
There shall be no accessible shear andsqueeze points created by loads appliedduring normal use.
For seating, the loads applied duringnormal use can be found in ENV 581-2,and for tables in EN 581-3.
Shear and squeeze points are notacceptable if a hazard is created by theweight of the user during normalmovements and actions, e.g. attempting tomove the seating by lifting the seat or byadjusting the backrest.
Modification = expanded scope to otherregions and both indoor / outdoor products
H-10004X
H-41012
X Test for all components
ASTM B117-07 modified /CostcoWholesaleRequirement
XOutdoor use
Test for all metalcomponents
Effects of Extremetemperature
Resistance to Corrosion -Metal Products orComponents
TEST LAB: Before proceeding, refer toCostco “Test and Inspection Request Form” (TRF) – Page 1 “Product Use” section. If “INDOOR USE” selected on the TRF,perform corrosion testing as below:-Shall withstand 24 hours in 1% salt spray(fog) with no corrosion or visual changeModification = 1% salt fog spray. If “OUTDOOR, GARAGE, BATHROOMUSE” selected on TRF, or when there is aclaim or picture of outdoor, garage orbathroom use made on the product,packaging, specifications or otherdocuments performas below:-Shall withstand 48 hours in 1% salt spray(fog) with no corrosion or visual changeModification = 1% salt fog spray. NOTE ON 48 HOURS SALT SPRAYTESTING: Costco requires reporting at 2stages as follows. Report shall documentresults at 24 hours AND 48 hours.
B4. PERFORMANCE
Functionality (If Appropriate) Shall function as intended as received
regions and both indoor / outdoor products
24 Hours at -32° F and 140° F - No failureor visual change (Report piece/section/whole unit placed in Chamber) Note:When pieces/Section were tested, to be
sure the tested part should be properly
cover/protected in cutting process.
results at 24 hours AND 48 hours.
Latest revision: 8 Nov 2013 Page 7 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
XOutdoor use
Test for all metal
Resistance to Corrosion -Metal Products orComponents (Continued)
CUTTING OF TEST SAMPLES: CostcoDOES NOT permit cutting or dismantling ofsamples for corrosion testing. If cutting ordismantling is unavoidable due to producttype, size or shape, this must be recorded.If cut, sample shall be completely coveredto prevent metal shaving contamination. Ifpieces/sections were tested, list whichpieces/sections, indicate pass or fail foreach piece/section, and include before andafter pictures of each piece/section. Itemshall be placed in test chamber in amanner that most closely resemblesorientation during INTENDED USE. VISUAL CHANGES: Report whether theproduct shows tarnishing or rusting (and X Test for all metal
components
H-41007
X Test for all components
ASTMD3359B(Mod)
X
Actual use
No Change after 24 Hours at 95% RH and100 °F - Also. If pieces/sections weretested, list which piece/section, indicatepass or fail for each piece/section, andinclude before and after pictures of eachpiece/section. Note: Whenpieces/Section were tested, to be sure
the tested part should be properly
cover/protected in cutting process.
* Durability - swivel - when No structural breakage or loss of
Effect of Humidity
* Cross Cut Adhesion [NOT APPLICABLE TO WOOD]
All the surface finish/coating must stayaffixed- Cut a grid of 16 squares by usingutility knife and apply the 3M masking tape(#202) to the grid. The surfacefinish/plating must remain intact after thetape were removed.
product shows tarnishing or rusting (andthe color) as defined:Tarnishing = Discoloration of the finish overthe metal (usually on copper, brass, silverand aluminum)Oxidization/Rust = Usually a powderysubstance that can be easily flaked off ( Fe= red, Cu = green, Al = white) REPORTING OF FAILURES: Only REDRUSTING shall be reported as a failure.(photograph ALL visual changes in report) DISPOSABLE ASSEMBLY TOOLS: One-Time-Use tools provided by manufacturersfor assembly (such as hex or open endedwrench) shall not be tested.
Actual use
-- -- NA
* Durability - swivel - whenapplicable
No structural breakage or loss ofserviceability - 15,000 cycles of rotationunder a 225 lbs load on the seat with aforce of 60mm from the front edge.Latest revision: 8 Nov 2013 Page 8 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
H-43015
-- -- NA
H-41055
X
* Rocking Durability - Glider,Rocker and Swings
Tie 173 lbs weight to the seat. Cycle theseating back and forth (full extension andretraction) 15000 cycles, and report ifmovement remains smooth.After test examine the chair if anysqueaking occurs
Surface scratching - woodpanel
No scratching or marring of surface (3cycles of 6 in back and forth.) Conduct withand without levelers. Note if levelersbecome bent or come off. Note anydamage / defects(bent/broken levelers).
H-41063-- -- NA
H-41063-- -- NA
H-41063-- -- NA
H-41063-- -- NA
Actual use
X
FederalSpecificationAA-H-001895B-80modified / H-43039
X
Actual use
X #409
Resistance to Hot Water
Shall result in no adverse change tosurface. Spray "409" solvent onto surface.Leave for 15 seconds. Wipe withnonmarring pad. 3 cycles.
Effects of cleaning solvent -applicable for hard materialsonly
Moisture content - seatbottom
Pour 25 mL. of boiling water and allowcooling. Dry surface, Shall be no graying orspotting
Moisture content - leg
8% - 12%
Moisture content - solidwood only
8% - 12%
Cycle test - movingcomponents
100 times / cycles use of movingcomponents – no failure and allcomponents must have and maintain asmooth uniformmovement throughout each cycle. (Allfunctional parts must be evenly aligned atthe start of the test and remain evenlyaligned.)
At equilibrium Point of 8% - 12% (Do nottest on MDF)
Moisture content - seat back 8% - 12%
Latest revision: 8 Nov 2013 Page 9 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
Visual
-- -- See Exhibit 2
Tensile
[All Materials]Cut each structural support only. This mayrequire all connecting members of theproduct to be cut for analysis.Provide labeled exhibit photos of the crosssections for each support. Review and ratethe cross section for conformance toproduct specifications. If no specificationsare supplied, then the pictures are to besupplied as documentation of the testedsample.
Note: If non-compliant with first cut, thencut failing support a total of 3 times toensure reinforcement meets claims.
Shall not separate minimum holding forceAttachment Strength-Cap
Support or reinforcementcross sectional review
TensileForce
X
Actual use-- -- NA
Actual use
-- -- NA
Actual use
-- -- NA
Actual use-- -- NA
16 CFR1500.44 /CostcoWholesale
X
Must meet requirements ( < 0.1 inch /second). Costco Wholesale requires allcomponents to be ignited that are incontact with the upper & lower perimeter ofthe major axis.
No failure with 25 lbs static load in eachpocket
Max. 5lbs horizontal force is applied tomove the sample (with 200 lbs placed onthe seat) on smooth vinyl surface for amaximum of 10 s. No measurement istaken for the first 5s of the test. The castershall be oriented in a running directionthroughout the test.
Shall not separate minimum holding force@ 5.0 lbs
Flammability
Caster or roller performance- if applicable
Attachment Strength-Capremoval strength - caps onend of tube or cap covers onscrew ends
Cup Holder Should fit standard 12 oz bottle & can & 16oz plastic cup.
Pocket Strength
Leg Rail Stop Strength(Rocking Chair Only)
Apply a horizontal force to leg rail stop.Shall withstand 25 lbs force for 1 minute.No failure/permanent deformation.
Recliner
Latest revision: 8 Nov 2013 Page 10 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
Measurement
-- -- NA
Lateral static stability factor(SSF)
The lateral SSF is evaluated by dividingdimension "G" by dimension "F".
G = the distance from the outer surface ofthe recliner mechanism support foot to theouter edge of the chairF = the distance from the center of thechairor its approximate center-of-gravity to theouter edge of the recliner mechanismsupport foot.(See figure 1)
The lateral SSF shall not be greater than0.85.Recliners with a SSF of 0.65 or less shouldbe preferred.
Measurement
-- -- NA
Compressiveforce / Forceguage
-- -- NA
Compressiveforce / Forcegauge
-- -- NA
Longitudinal static stabilityfactor (SSF)
Force of partially close offoot rest
A downward compressive force is appliedon the intersection point of centerline of therecliner and 6 inches from the front edge offoot rest.
Record the average peak force when thefoot rest had moved downward throughapproximately half of its travel distance or45°.
The average peak force shall be 25 lbf orless.
The longitudinal SSF is evaluated bydividing dimension "A" by dimension "B".
A = the length of the reline mechanismsupport feetB = the overall length of the chair(See figure 1)
The longitudinal SSF shall not be less than0.85.
Force of fully close of footrest
A downward compressive force is appliedon the intersection point of centerline of therecliner and 6 inches from the front edge offoot rest.
Record the average peak force when thefoot rest is fully closed.
be preferred.Report as DATA in summary if the lateralSSF is in between 0.65 to 0.85
foot rest is fully closed.
The average peak force shall be 30 lbf orless. Latest revision: 8 Nov 2013 Page 11 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
BS EN 581-1: 2006 5.1
X
Note: If the type of product Category is not applicable to the one of the following test requirement, write dowm the NA on
each head title only and delete the rest of test table in test report.
All Countries
Outdoor Seating
BS EN 581-1:2006 & EN581-2:2009 - Outdoor furniture — Seating
and tables for camping, domestic and contract use
Edges and corners For seating, the edges and corners of theseat, back rest and arm rests which aredirectly in contact with the user whensitting, lying or reclining shall be rounded orchamfered.
All other edges and corners of seating and
BS EN 581-1:2006 5.2
X
BS EN 581-1:2006 5.3
X
-- -- NA
5.3.1 Shear and squeeze points when
setting up and folding
Unless 5.3.2 or 5.3.3 are applicable, shearand squeeze points that are created onlyduring setting up or folding are acceptableproviding the user can be assumed to be incontrol of his/her movements and to beable to cease applying the forceimmediately on experiencing pain.The edges of parts moving relative to eachother and creating shear and squeezepoints shall be as specified in 5.1.
5.3.2 Shear and squeeze points under
the influence of powered mechanisms
There shall be no accessible shear andsqueeze points created by parts of thefurniture operated by poweredmechanisms, e.g. mechanical springs, gaslifts.
Shear and squeeze points
All other edges and corners of seating andtables, accessible during use shall be freefrom burrs or/and sharp edges.
Tubular components, holesand gaps accessible duringuse
Tubular components, holes and gapsaccessible during use shall be covered if a7 mm or 12 mm test probe (Clause 4) canbe pushed into them in any direction with amaximum force of 30 N (6.6lbs) to a depthof more than 10 mm and cannot be pulledout again in the reverse direction by amaximum force of 30 N (6.6lbs).Bottom of tubular legs shall be capped orplugged.
Latest revision: 8 Nov 2013 Page 12 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
X
5.3.3 Shear and squeeze points during
use
There shall be no accessible shear and
squeeze points created by loads applied
during normal use.
For seating, the loads applied duringnormal use can be found in ENV 581-2.Shear and squeeze points are notacceptable if a hazard is created by theweight of the user during normalmovements and actions, e.g. attempting tomove the seating by lifting the seat or byadjusting the backrest.
BS EN 581-2:2009 6.1.1& 6.2.2
X
BS EN 581-2:2009 6.2.3
X
EN1728:2000,6.2.1
X
Mechanical safetyrequirements
The requirements are fulfilled during andafter testing in accordance with Table 1when:a) there are no fractures of any joint, member or component;b) there is no loosening of joints intended to be rigid;c) the seating fulfils its function after removal of the test loads.
Seat and back static loadtest[If seat and back are of onepiece of flexible material(e.g. textile), only the testson seat shall be carried out.]
Seat forceCamping: 1100 N (242lbs)Domestic: 1600 N (352lbs)
Contract: 2000 N (440lbs)10x10 s (±2s) + 1x30 min (±10 s)
Back forceCamping: /Domestic: 410 N (90.2lbs)
Contract: 560 N (123.2lbs) max.10x10 s (±2s) + 1x30 min (±10 s)
Stability The stability requirements specified in EN1022 shall be fulfilled.Carry out the applicable tests according toEN 1022 (see Table 1).
Note: Do NOT test on US/MX "Beach
Chair" and MTS to auto remove this
special instruction on 1/1/2014.
Table 1 — Test sequence
and test parameters
Latest revision: 8 Nov 2013 Page 13 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
EN1728:2000,6.2.2
X
EN1728:2000,6.7
X
Seat front edge static loadtest
ForceCamping: 1100 N (242lbs)Domestic: 1300 N (286lbs)
Contract: 1300 N (286lbs)10x10 s (±2) + 1x30 min (±10 s)
Seat and back fatigue testforseating[If seat and back are of onepiece of flexible material(e.g. textile), only the testson seat shall be carried out.]
CyclesCamping: 12500Domestic: 25000
Contract: 50000
Seat forceCamping: 1000 N (220lbs)Domestic: 1000 N (220lbs)
Contract: 1000 N (220lbs) X
See Annex A
-- -- NA
EN1728:2000,6.6 -- -- NA
Fatigue test on back restmechanism
CyclesCamping: 5000Domestic: 10000Contract: 20000
Seat loadCamping: 100 kg (220lbs)Domestic: 100 kg (220lbs)Contract: 100 kg (220lbs)
ForceCamping: 190 N (41.8lbs)Domestic: 250 N (55lbs)Contract: 250 N (55lbs)
Back: bending moment,Camping: 75 N.m (663.75lb.in)Domestic: 100 N.m (885lb.in)Contract: 100 N.m (885lb.in)
Arm downwards static loadtest
Vertical force,Camping: /Domestic: 700 N (154lbs)Contract: 900 N (198lbs)
Contract: 1000 N (220lbs)
Back: bending moment,Camping: 75 N.m (663.75lb.in) maxDomestic: 100 N.m (885lb.in) max
Contract: 100 N.m (885lb.in) max
Latest revision: 8 Nov 2013 Page 14 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
EN1728:2000,6.10
-- -- NA
EN1728:2000,6.12
X
Leg forward static load test Seat load,Camping: 75 kg (165lbs)Domestic: 75 kg (165lbs)Contract: 100 kg (220lbs)
Horizontal force,
Arm fatigue test CyclesCamping: 5000Domestic: 10000Contract: 30000
ForceCamping: 400 N (88lbs)Domestic: 400 N (88lbs)Contract: 400 N (88lbs)
X
EN1728:2000,6.13
X
EN1728:2000,6.15
X
EN1728:2000,6.4
-- -- NA
Seat impact test[The application point shallbe at least 100 mm from thefront edge. This test shall notbe carried out on seatingwith a seat height > 600mm.]
weight of impactor: 25kg(55lbs)Drop height,Camping: 140mm(5.51in)Domestic: 180(7.09in)Contract: 180(7.09in)10 times
Foot rail static test for highseating
Vertical force,Camping: /Domestic: 1000 N (220lbs)Contract: 1200 N (264lbs)
Horizontal force,Camping: 250 N (55lbs)Domestic: 300 N (66lbs)Contract: 400 N (88lbs)
Leg sideways static load test Seat loadCamping: 75 kg (165lbs)Domestic: 75 kg (165lbs)Contract: 100 kg (220lbs)
Horizontal forceCamping: 200 N (44lbs)Domestic: 300 N (66lbs)Contract: 400 N (88lbs)
Latest revision: 8 Nov 2013 Page 15 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
EN 1022
X
EN 1022
Forward stability Shall comply EN1022[In the case of seating which might not fulfilthe stability requirements before carryingout any tests, the applicable stability testsmay be carried out before starting thesequence of tests specified in this table.][This test is not applicable for seating witha seat height < 200 mm and a mass < 5 kg(11lbs). The height shall be determined bymeasuring from the floor to the upperseating area on the geometrical centre ofthe unloaded seat.]
Rearward stability Shall comply EN1022[In the case of seating which might not fulfilthe stability requirements before carryingout any tests, the applicable stability tests
-- -- NA
EN 1022
X
BS EN 581-1: 2006 5.1
-- --NA
Not loungers
For seating, the edges and corners of theseat, back rest and arm rests which aredirectly in contact with the user whensitting, lying or reclining shall be rounded orchamfered.
All other edges and corners of seating andtables, accessible during use shall be freefrom burrs or/and sharpedges.
Sideways stability Shall comply EN1022[In the case of seating which might not fulfilthe stability requirements before carryingout any tests, the applicable stability testsmay be carried out before starting thesequence of tests specified in this table.][This test is not applicable for seating witha seat height < 200 mm and a mass < 5 kg(11lbs). The height shall be determined bymeasuring from the floor to the upperseating area on the geometrical centre ofthe unloaded seat.]
Outdoor Seating
EN581-2:2009 - Outdoor furniture-Specific Test Method and
Requirements for Loungers ( ANNEX B)
Edges and corners
out any tests, the applicable stability testsmay be carried out before starting thesequence of tests specified in this table.]
Latest revision: 8 Nov 2013 Page 16 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
BS EN 581-1:2006 5.2
-- --NA
Not loungers
BS EN 581-1:2006 5.3
Tubular components, holesand gaps accessible duringuse
Tubular components, holes and gapsaccessible during use shall be covered if a7 mm or 12 mm test probe (Clause 4) canbe pushed into them in any direction with amaximum force of 30 N (6.6lbs) to a depthof more than 10 mm and cannot be pulledout again in the reverse direction by amaximum force of 30 N (6.6lbs).Bottom of tubular legs shall be capped orplugged.
Shear and squeeze points 5.3.1 Shear and squeeze points when
setting up and folding
Unless 5.3.2 or 5.3.3 are applicable, shearand squeeze points that are created onlyduring setting up or folding are acceptableproviding the user can be assumed to be in
-- --NA
Not loungers
-- --NA
Not loungers
-- --NA
Not loungers
BS EN 581-2:2009 B5.2
-- --NA
Not loungers
Stability For sideways and forward stability, whenloaded, the lounger shall not overturn.
providing the user can be assumed to be incontrol of his/her movements and to beable to cease applying the forceimmediately on experiencing pain.The edges of parts moving relative to eachother and creating shear and squeezepoints shall be as specified in 5.1.
5.3.2 Shear and squeeze points under
the influence of powered mechanisms
There shall be no accessible shear andsqueeze points created by parts of thefurniture operated by poweredmechanisms, e.g. mechanical springs, gaslifts.
5.3.3 Shear and squeeze points during
use
There shall be no accessible shear and
squeeze points created by loads applied
during normal use.
For seating, the loads applied duringnormal use can be found in ENV 581-2.Shear and squeeze points are notacceptable if a hazard is created by theweight of the user during normalmovements and actions, e.g. attempting tomove the seating by lifting the seat or byadjusting the backrest.
-- --Not loungersLatest revision: 8 Nov 2013 Page 17 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
BS EN 581-2:2009 B5.3
-- --NA
Not loungers
B.2.1.1 andEN
Seat and back static loadtest
Seat force,Camping: 1100 N (242lbs)Domestic: 1600 N (352lbs)
The requirements are fulfilled during andafter testing in accordance with Table B1when:a) there are no fractures of any joint, member or component;b) there is no loosening of joints intended to be rigid;c) the seating fulfils its function after removal of the test loads.
Table B1 — Test sequence
and test parameters
Mechanical safetyrequirements
1728:2000,6.2.1
-- --NA
Not loungers
B.2.1.2 andEN1728:2000,6.7
-- --NA
Not loungers
Seat and back fatigue testforseating
Domestic: 1600 N (352lbs)Contract: 2000 N (440lbs)10x10 s (±2s) + 1x30 min (±10 s)
Back: force,Camping: /Domestic: 410 N (90.2lbs)Contract: 560 N (123.2lbs) max10x10 s (±2s) + 1x30 min (±10 s)
CyclesCamping: 12500Domestic: 25000Contract: 50000
Seat: forceCamping: 750 N (165lbs)Domestic: 1000 N (220lbs)Contract: 1000 N (220lbs)
Back: bending moment,Camping: 75 N.m (663.75lb.in) maxDomestic: 100 N.m (885lb.in) maxContract: 100 N.m (885lb.in) max
Latest revision: 8 Nov 2013 Page 18 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
B.2.1.3 andAnnex A
-- --NA
Not loungers
Fatigue test on back restmechanism
CyclesCamping: 12500Domestic: 25000Contract: 50000
Seat loadCamping: 100 kg (220lbs)Domestic: 100 kg (220lbs)Contract: 100 kg (220lbs)
ForceCamping: 190 N (41.8lbs)Domestic: 250 N (55lbs)Contract: 250 N (55lbs)
Back: bending moment,Camping: 75 N.m (663.75lb.in)
B.2.1.3 andAnnex A
-- --NA
Not loungers
EN1728:2000,6.10
-- --NA
Not loungers
B.2.1.6 andEN1728:2000,6.15 -- --
NANot loungers
B.2.1.7
-- --NA
Not loungers
Lifting test
Drop height, mmCamping: 140Domestic: 180Contract: 18010 times
Arm fatigue test CyclesCamping: 5000Domestic: 10000Contract: 30000
Force,Camping: 400 N (88lbs)Domestic: 400 N (88lbs)Contract: 400 N (88lbs)
Arm downwards static loadtest
Vertical force,Camping: /Domestic: 700 N (154lbs)Contract: 900 N (198lbs)
Seat impact test
Camping: 75 N.m (663.75lb.in)Domestic: 100 N.m (885lb.in)Contract: 100 N.m (885lb.in)
MassCamping: 100 kg (220lbs)Domestic: 100 kg (220lbs)Contract: 100 kg (220lbs)
CyclesCamping: 500Domestic: 1000Contract: 2000
Latest revision: 8 Nov 2013 Page 19 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
B.3.1.1
-- --NA
Not loungers
B.3.1.2
-- --NA
Not loungers
Force (B6)Camping: 600 N (132lbs)Domestic: 600 N (132lbs)Contract: 600 N (132lbs)
Forward stability
Force (B4)Camping: 600 N (132lbs)Domestic: 600 N (132lbs)Contract: 600 N (132lbs)
CyclesCamping: 250Domestic: 250Contract: 250
Sideways stability
Not loungers
EN1728:2000,6.2.1/CostcoWholesaleclaimed loadcapacityverification
-- -- NA
Claim verification for outdoor seating (if the claimed capacity over 110kg/242lbs)
* Seat and back static loadtest[If seat and back are of onepiece of flexible material(e.g. textile), only the testson seat shall be carried out.]
Seat forceCamping: Test the claimed package/specLoad Capacity. If the claim is ≤ 242 lb, donot complete additional verification testing.Refer to standard EN 1728:2000, 6.2.1 testresults
Domestic: Test the claimed package/specLoad Capacity. If the claim is ≤ 352 lb, donot complete additional verification testing.Refer to standard EN 1728:2000, 6.2.1 testresults
Contract: Test the claimed package/specLoad Capacity. If the claim is ≤ 440 lb, donot complete additional verification testing.Refer to standard EN 1728:2000, 6.2.1 testresultsNOTE: If capacity claim is not present inthe supplied spec or on the retail package,contact the supplier and Costco forclarification.10x10 s (±2s) + 1x30 min (±10 s)
Back forceCamping: /Domestic: 410 N (90.2lbs) x(Claimed loadin kg/110)Contract: 560 N (123.2lbs) x(claimed loadin kg/110)10x10 s (±2s) + 1x30 min (±10 s)
Latest revision: 8 Nov 2013 Page 20 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
EN1728:2000,6.2.2
-- -- NA
* Seat front edge static loadtest
ForceCamping: Test the claimed package/specLoad Capacity. If the claim is ≤ 242 lb, donot complete additional verification testing.Refer to standard EN 1728:2000, 6.2.1 testresultsDomestic: Test the claimed package/specLoad Capacity. If the claim is ≤ 286 lb, donot complete additional verification testing.Refer to standard EN 1728:2000, 6.2.1 testresultsContract: Test the claimed package/specLoad Capacity. If the claim is ≤ 286 lb, donot complete additional verification testing.Refer to standard EN 1728:2000, 6.2.1 testresults
EN1728:2000,6.15
-- -- NA
AppropriateAnalyticalMethod
-- -- NR
AATCC 30-04Part 3 -- -- NR
AATCC 8
-- -- NA
AATCC 116
XDry: 4.5
* Seat impact test[The application point shallbe at least 100 mm from thefront edge. This test shall notbe carried out on seatingwith a seat height > 600mm.]
weight of impactor: 25kg(55lbs)Drop height,Camping: 140mm (5.51in) x (Claimed loadin kg/110)Domestic: 180 (7.09in) x (Claimed load inkg/110)Contract: 180 (7.09in) x (Claimed load inkg/110)10 times
B5. ANALYTICAL
Colorfastness to crockingB6. COLORFASTNESS
Min. Class 4.0 (Dry); Class 3.0 (Wet) forcrocking
* Material Identification(By requested only)
* Antifungal activity,assessment on textilematerials(By requested only)
No growth on 6 x 6 inch swatch
Min. Class 4.0 (Dry); Class 3.0 (Wet) forcrocking
Colorfastness to rotarycrocking
Report Actual, Shall comply with anyclaims.
Note: "If the number of seating is not obvious, divide the total seat length (in mm) by 600 and round to the nearest whole number todetermine the number of seating. Divide the total seat length by the number of seating to determine the length of each seating."
Note: To test six-position folding seating units, see addendum at end of protocol.
XWet: 4.5Latest revision: 8 Nov 2013 Page 21 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
AATCC 107
-- -- NA
AATCC 16 * Colorfastness to light(Outdoor use, hard materialonly)
CS. Class 3.0 min at the base/mainsurface area/up to 2 materials.
Colorfastness to water
Class 4.0 @ 20 AFU & Class 3.0 @ 100AFU. Test up to 5 major / maincomponents (not minor or smallcomponents such as plastic foot caps) of
X20AFU: All 4.5
100AFU: All 4.5
Key:
IMPORTANT NOTICE: Please review the Actual Products against the updated Requirements/Regulation. Prior to testing and
communicate with clients if additional test required. This protocol is the basic guidelines to follow and does not replace the
content of the standard. (For Silverware additional test should be included)
**Mandatory Requirement
Note: It is the Vendor's responsibility to ensure that the products comply with all United States Federal, States,
and local laws, regulations, and ordinances. A Pass Lab test result does not constitute a certification that a
vendor's products meet all legal requirements. It is the vendor's responsibility to manufacture their items to
comply with all applicable laws and in conformance with the purchase order terms and conditions.
*Additional Charge For This Test# By requested only
components such as plastic foot caps) ofthe item regardless of material (do not testplain non-painted metal or plain non-painted / non-stained wood such as mostteak). List each component (By Materialand/or Color) that is tested and the finalrating for each tested components.
Latest revision: 8 Nov 2013 Page 22 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Global General Outdoor Seating Protocol
(This protocol should be used for these item types: Chair, Ottoman, Stool, Sofa, Rocker Glider, Swing, Lounge. )
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
FN - 058 - Costco
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
Figure 1Figure 1Figure 1Figure 1 Dimension measurement for SSFDimension measurement for SSFDimension measurement for SSFDimension measurement for SSF
Latest revision: 8 Nov 2013 Page 23 of 23
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
US
SP-572 -- --NA
See test result 4
US
TPCHX Refer TPCH protocol
UK
94/62-EC -- --
NA
(Ship to US)
US
SP-584-US-
Costco -- --NA
MTS Report Number:
13-Dec-13 Result Reviewed by:
* Cal Prop 65 (For US only)
CARB formaldehyde
documentation and label
review (For US only)
* UK Toxics in Packaging
Materials Directive
(For UK only)
Supplemental Protocol
* US Toxics in Packaging
Clearing House (TPCH)
(For US only)
Must Comply With Requirements of TPCH
Protocol.
Must Comply With Requirements of 94/62-
EC Protocol.
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
Shall be reviewed against the requirements
of California proposition 65 to determined if
additional testing or labeling is required.
The sample shall be reviewed against the
requirements of Title 17, CA Code of
Regulations, Section 93120.7(d) FabricatorCostco -- --(No composit wood)
US
SP-014-US-
Costco X Refer SP-014
US & CN
EL-900-NA
-- --
NA
(Not electronic
product)
US & CN
SP - 301 -
US -- -- NA
review (For US only)
* CPSIA requirement for
Lead In surface coating,
Lead in Substrate material;
Phthalate
(For US only)
Regulations, Section 93120.7(d) Fabricator
Label Requirements
* Flammability for Filling
Material (CAL Bureau of
Home Furnishing) TB
116,117
Must Comply with requirements (Use
Protocol SP-301-US)
The sample shall be reviewed against the
requirements of CPSIA of 2008.
* ** Federal Communications
Commission - FCC - Part 15/
industry Canada Document
management. (For US & CN
only)
Electronic Products shall have complied
with FCC/industry Canada document
regulations appropriate for the country of
destination as shown by evaluation to the
cited protocol. Products under FCC
verification or declaration of Conformity
must be submitted with complete and
correct test reports. Designs claimed to be
exempt from FCC/IC equipment
authorization due to an un-obvious feature
(like electronic frequency), must be
submitted with acceptable supporting
technical documents.
Latest revision: 29 Mar, 2013 Page 1 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
UK
SP- 301-UK
(Doc
Review for
Patio
Furniture
ONLY)
-- --NA
(Ship to US)
* Flammability for Filling
Material and Fabric (UK
Furniture and Furnishings
Fire Safety Regulation)
Must Comply with requirements (Use
Protocol SP-301) [For Patio Furniture
The vendor will submit their
flammability reports (dated within 1
year) and MTS will review them to
make sure they are the correct
submitted fabric and were tested to the
correct UK Furniture and Furnishings
Fire Safety Regulation. if the vendor
does not submit their flammability
reports with the initial submission, the
lab must place the item ON HOLD,
contact the vendor by email requesting
flammability reports to be sent to the lab
for review. the vendor must supply the
report within 48 hours. If MTS engineers
find the submitted reports are
acceptable, the lab would pass this
US
TX-990-US -- -- NA
CN
TX-990-CN -- --
NA
(Ship to US)
US, MX,
ASIA
SP-004-US -- --
NA
(Not child appealing
feature)
CN
SP-004-CN -- --
NA
(Ship to US)
UK
SP-004-UK -- --
NA
(Ship to US)
*Law Label - Bedding Tag
(For Upholstery & Stuffed
Article) (For CN only)
Must Comply With Requirements -
"If item product classification is Décor Play
Value"
* Child Appealing Feature
Must Comply With Requirements
Must Comply With Requirements
*Law Label - Bedding Tag
and California Flammability
Tag (For upholstery furniture
and bedding item) (For US
only)
acceptable, the lab would pass this
portion of the test. MTS MUST copy the
Costco Non-Food QA project person on
all flammability related emails. If no
acceptable documents can be provided
by the factory, MTS shall perform the
test.]
NOTE: Mandatory UK Flammability label
review must be performed even if
document review is being performed.
Latest revision: 29 Mar, 2013 Page 2 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
All apart
from UK
EL-910-NA -- --
NA
(Not battery powered
product)
UK
EL-910-UK -- --
NA
(Ship to US)
SP-020-KR -- --
NA
(Ship to US)
X
X
LABELING
* Korean Packaging
Standard
* Primary Battery Powered
Product
Must Comply with Requirement
Product Identification
** Labeling - Packaging
F.P.&L. & L., Act
(16 CFR 500) OR All other
Products: NIST Uniform
Distributor's Name & Address (City, State
& Zip) (See Minimum Labeling
Requirements)
US, MX,
ASIA
16 CFR 500
and Uniform
Must Comply With Requirements
X
X
Product Identification
Net Quantity of Contents Shall Be
Expressed In Terms Of Weight Or Mass,
Measure, Numeric Count or combination
so as o give accurate information to
Facilitate consumer comparison (US &
Metric).
Products: NIST Uniform
Laws and Regular Handbook
130
and Uniform
Laws and
Regular
handbook
130
Latest revision: 29 Mar, 2013 Page 3 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
-- --NA
(Ship to US)
Manufacturer or Distributor's Name &
Address (City, State & Zip). Minimum 1.6
mm type size.( Both in English and French)
Placed anywhere except bottom
Where a prepackaged product is wholly
manufactured or produced in a country
other than Canada, the marking shall
consist of one of the following:
-The name and address of a Canadian
dealer preceded by the words “imported by
” (“importé par”) or “imported for” (“importé
pour”); or
-The statement of geographic origin
located immediately adjacent to the name
and address of a Canadian dealer; or
-The name and address of the dealer
** Labeling - Packaging
(package "Copy" or Artwork
Request Form may be
Submitted)
CN
Consumer
package &
Labeling Act
Regulations
-- --NA
(Ship to US)
-- --NA
(Ship to US)
CN
Consumer
package &
Labeling Act
Regulations,
c 417,
Section 6
-- --NA
(Ship to US)
CN
Quebec,
R.S.Q., c. C-
11
-- --NA
(Ship to US)
All mandatory labeling information must be
in both French and English languages. The
type of mandatory labeling that is required
includes, but is not limited to, any warning
written statement or warning, product
identity, net content and ingredient
declarations. The names and address of
the manufacturer and country or origin
labeling requirements may be presented in
either French or English.
-The name and address of the dealer
outside Canada
Product Net Quantity
English and French (Metric) PDP, Bold,
Type Size Based on PDP Size.
Principle Display Panel Minimum
Type
< 32 cm² 1.6 mm
> 32 cm² ; < 258 cm² 3.2 mm
> 258 cm² ; < 645 cm² 6.4 mm
> 645 cm² ; < 25.8 dm² 9.5 mm
> 25.8 dm² 12.7 mm
Product Identification (English and French),
PDP in bold with 1.6mm Minimum Type.
Every inscription on a product container,
wrapping, leaflet, brochure or card supplied
with the product, including the directions for
use and warranty certificates, must be
drafted in French. No inscription in another
language may be given greater prominence
than that in French.Latest revision: 29 Mar, 2013 Page 4 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
-- --NA
(Ship to US)
-- --NA
(Ship to US)
All
Costco
Requirement
Specific or Supplemental Net
Quantity Requirements -
Retail Package Clear
Product / Manufacture
Marking
Net quantity of contents shall be expressed
in terms of weight or mass, measure,
numerical count or combination so as to
Distributor's Name & Address (City, State
& Zip) (See Minimum Labeling
Requirements)
Fail if missing UK distributors / UK
responsible party name and address on
the package.
Lab need to take photograph and
indicate in the test report executive
summary the actual name and address
that was supplied on the package.(if
any).Product Identification
General
Product
safety
directive
2001/95/EC
Requirement
X
UK
Trade
Description
Order 1988 -- --
NA
(Ship to US)
Retail Package Clear
Presentation of Selling Unit
Contents or Piece Count
numerical count or combination so as to
give accurate information to facilitate
consumer comparison (U.S. and metric
units).
Retail package shall clearly indicate carton
contents and deemed NON-COMPLIANT
when ALL THREE of the following are met:
1. There is No clear written indication of net
quantity expressed on retail package
2. There is No visible way to assess
product without removing from retail
package.
3. It is NOT obvious to assume that there is
only 1 article in the retail package.
Note: Clear photos of the package of the
above discrepancy should be attached in
the report when available."
Labeling of Product &
Packaging
All labeling information must be truthful.
Latest revision: 29 Mar, 2013 Page 5 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
X Made in China
X Made in China
CN
Canada
Customs
Tariff,
Marking of
Imported
Goods
a) Imported goods shall indicate country of
origin.
b) Must be legible and sufficiently
permanent to remain on the goods until it
reaches the purchaser.
c) For goods from NAFTA countries, the
language may be English, French or
Spanish.
** Country of Origin Marking Shall indicate country of origin legibly, and
in comparable size and visible to purchase.US
19 CFR 134
(Master Carton)
Shall indicate country of origin legibly, and
in comparable size and visible to purchase.
Goods
Regulations,
SOR-94-10 /
Marking of
Imported
Goods
Memorandu
m D11-3-1
-- --NA
(Ship to US)
UK, MX,
ASIA
Costco
Requirement
-- --NA
(Ship to US)
Shall indicate country of origin legibly, and
in comparable size and visible to purchase.
Spanish.
d) For goods from non-NAFTA countries,
language may be English or French and
marking should appear on individual
articles.
e) If the packaging conceals the Country of
Origin mark, then the packaging must also
be marked.
f) There is a provision to mark only the
container if the goods are imported from
NAFTA countries, providing that certain
conditions are met, such that the ultimate
purchaser will see the marked container.
Labeling evaluation shall be performed.
Vendor shall be responsible for the
accuracy of the information contained.
Latest revision: 29 Mar, 2013 Page 6 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
US, MX,
ASIA
16 CFR 300
/ 303 -- -- NA
CN
Textile
Labeling Act
and Textile
Labeling and
Advertising
Regulations,
C.R.C., c.
1551
-- --NA
(Ship to US)
Fiber label review
(If applicable)
Note: Do not conduct Fiber
ID testing during
Production, if the vendor
can provide previous CV
results for Fiber ID.
Previous results need to be
conducted within the last 6
months. If they are found
to be greater than 6
months old, then new Fiber
ID testing will take place.
If the vendor cannot
provide previous CV
testing results, lab is to
conduct Fiber ID testing.
Must conform to regulations
Shall comply FTC requirement
UK
Directive
96/74/EC &
UK SI 1986
No.26
-- --NA
(Ship to US)
US
16 CFR
1632
-- -- NA
All
Visual
X
conduct Fiber ID testing.
Must conform to regulations
Accuracy or adequacy of
instructions
Each mattress set subject to the Standard
shall bear a permanent, conspicuous, and
legible label(s) containing the information
specified per section and be of the
appropriate design provided in Figures12
through 17.
Note: This requirement becomes effective
July 1, 2007.
* Mattress Flammability
Labeling (if they contain
upholstery material between
the ticking and the mattress
core)
Shall be included if necessary. Shall
include assembly, use, maintenance, and
safety information as required in the
language (s) applicable to the destination
country (s) with no errors or spelling
mistakes. Shall be easy to follow and
accurate.
Latest revision: 29 Mar, 2013 Page 7 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
ACL
-- --NA
(Ship to US)
Warranty Statement 1) If a warranty claim is presented on the
package, instructions or hangtag, the
statement in red must also be present. If
multiple warranty claims are made, this
statement will need to be present next to
each of those claims.
Our goods come with guarantees that
cannot be excluded under the
Australian Consumer Law. You are
entitled to a replacement or refund for a
major failure and for compensation for
any other reasonably foreseeable loss
or damage. You are also entitled to have
the goods repaired or replaced if the
goods fail to be of acceptable quality
and the failure does not amount to a
major failure.
ACL
-- --NA
(Ship to US)
Warranty Statement
(Continued)
2) A document which evidences a warranty
against defects must state:
- what you as the business (giving the
warranty) must do if goods are faulty or
defective – e.g. repair or replace the goods
- what the consumer must do to claim
under the warranty—e.g. not misuse the
goods
- the following information about the
business giving the warranty:
1. name
2. business address
3. telephone number
4. email address (if any)
- the warranty period—i.e. how long the
warranty lasts for
- what a consumer must do to claim under
the warranty—i.e. how to contact you and
where to send the claim
- whether you or the consumer are
responsible for expenses associated with a
warranty claim and how the consumer can
claim back any expenses incurred
- that the benefits provided to the
consumer by the warranty are in addition to
other rights and remedies available to the
consumer under the law.
3) If there is no warranty claim, nothing is
needed.
Latest revision: 29 Mar, 2013 Page 8 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
All
Label
Review
X
Examine the retail packaging (or submitted
artwork).
Record each objective (factual) claim which
can be substantiated by the testing within
this protocol and rate accordingly.
Any net quantity/ dimensional claims
evaluated in other sections of this protocol
need not be recorded.
Record all other objective (factual) and
subjective (opinion) claims as "NT" for Not
Tested and report as data (also include in
the remarks section of the Executive
Summary).
Modification = claim(s) not verified/ tested
Claim verification
BS EN
12520: 2010
Section 6
-- --NA
(Ship to US)
BS EN 581-2
:2009
Section 7.1
-- --NA
(Ship to US)
Modification = claim(s) not verified/ tested
report as data.
Information for use
(Indoor seating)
Information for use shall be available in the
language of the country in which it will be
delivered to the end user.
It shall contain at least the following details:
a) assembly instructions, where applicable;
b) instructions for the care and
maintenance of the seating;
c) if the seating is fitted with seat height
adjustments with energy accumulators, an
additional note is required pointing out that
only trained personnel may replace or
repair seat height adjustment components
with energy accumulators.
Instruction for use shall be provided in the
language(s) of the country where the
seating are sold. These instructions shall
be headed "IMPORTANT, RETAIN FOR
FUTURE REFERENCE: READ
CAREFULLY" in
letters no less than 5 mm high.
These instructions shall include at least the
following:
a) name and address of the producer
(manufacturer or supplier);
b) information regarding maintenance;
c) conditions for use of the product
(camping, domestic or contract).
UK and AU Furniture
Instruction for use - General
(Outdoor seating)
Latest revision: 29 Mar, 2013 Page 9 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
BS EN 581-2
:2009
Section 7.2
-- --NA
(Ship to US)
California,
New York,
Chicago,
and
Massachuse
tts State and
City Laws
Costco plastic bag warning
statement
All mobile loungers not intended to be lifted
and moved under the load specified in
Table B.1 shall be marked with a pictogram
as an example is shown in Figure 1.
COSTCO REQUIREMENTSPlastic bags with a thickness of less than 1 mil, in
which the diameter is 5.64 (referencing to 2005
California Business and Professions Code
Sections 22200-22205 CHAPTER 13.
POLYETHYLENE PLASTIC MATERIALS) inches
or greater used as packaging or packaging article
for domestic/household use (e.g. laundry bag,
garbage bag) shall contain a warning statement
Instruction for use - Marking
for mobile loungers
(Outdoor seating)
City Laws
modified
-- -- NA
garbage bag) shall contain a warning statement
similar to below on both sides of each bag in
English, French and Spanish:
WARNING: To avoid danger of suffocation, keep
this bag away from babies and children. Do not
use in cribs, beds, carriages or playpens. This
bag is not a toy. Discard bag and any other
packing materials immediately after removing
product. Do not re-use this bag.
MISE EN GARDE: Pour éviter tout risque de
suffocation, tenir ce sac hors de la portée des béb
és et des enfants. Ne pas utiliser dans les
berceaux, les lits, les carrosses ou les parcs. Ce
sac n’est pas un jouet. Jeter ce sac ou tout autre
matériau d’emballage immédiatement après avoir
enlevé les produits. Ne pas ré-utiliser ce sac.
ADVERTENCIA: Para evitar riesgo de sofocación,
mantenga esta bolsa alejada de bebes y niños.
No use en cunas, camas, carriolas o corralitos.
Esta bolsa no es un juguete. Tire la bolsa y los
otros materiales de empaque inmediatamente.
No re-use esta bolsa.
Latest revision: 29 Mar, 2013 Page 10 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
-- -- NA
This must be printed on all plastic bags regardless
of the Costco destination country for the item.
All 3 languages must be in the same font size,
with equal presentation.
The warnings shall be printed in an appropriate
font size such that they are clearly visible and
legible (per 105 CMR 630.000 and various
city/state laws). The size of the print of such
statement shall be as follows:
Total length and width of bag : Size of Print
60 inches or more : At least 24 point
40 inches to, but not including 60 inches : At least
18 point
25 inches to, but not including 40 inches: At least
14 point
Less than 25 inches: At least 10 point
If the total length and width of the bag is more than
40 inches, the warning shall be repeated at 20
Costco plastic bag warning
statement (Continued)
-- -- NA
16 CFR
1632
-- -- NA
* Flammability of mattress
and mattress pad - lighted
cigarette - documentation
review - 1 year
40 inches, the warning shall be repeated at 20
inch intervals.
The lab will only verify the English version and
confirm that two other warnings presented in
French and Spanish are present.
Note:
-A warning statement isn't required on heavy
gauge material typically constructed with
zippers and stitched seams. The actual
presence of zippers and seams are not
required to meet this exemption.
Don’t fail if :
1) The exact verbiage does not need to be
present as long as general message is
conveyed on the provided warning.
2) Spanish and French warnings are not
present.
3) Incorrect font size(s) are used but the
warning is still legible.
4) Not repeated as required.
5) Only on one side of the bag
A mattress shall not show a char length of
more than 2 inches (5.1 cm) in any
direction, when tested using lighted
cigarette as specified in the test method.
In lieu of testing, test report can be
submitted if dated within one year. If
testing is required additional charges apply.
FLAMMABILITY
Costco plastic bag warning
statement (Continued)
Latest revision: 29 Mar, 2013 Page 11 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
16 CFR
1633
-- -- NA
CN
CHPA H-3
Schedule 1
Section 4
/ ASTM
D1230-61
-- --NA
(Ship to US)
* Flammability of mattress
set - open flame -
documentation review - 1
year
* Textile Flammability Must Comply With Requirements
(Schedule 1,Part 1 Section 4 Hazardous
Product Act H-3)
All Mattress sets manufactured, imported,
or renovated on or after July 1st 2007 shall
not show the total heat release of more
than 15 mega-joules in the first 10 minutes
of the test or the peak rate of heat release
of more than 200 kilowatts.
In lieu of testing, test report can be
submitted if dated within one year. If
testing is required additional charges apply.
D1230-61
Latest revision: 29 Mar, 2013 Page 12 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
US
Consumer
Product
Safety
Improveme
nt
Act of 2008
/ 16
CFR 1303 /
AOAC
974.02
(mod)
X See Test Result 1
(CPSIA item)
All accessible surface coatings shall not
contain lead in excess of 0.009% (90ppm)
of the weight of the total content of paint or
surface coating.
Report actual results or include data table
within report
Note: In case of insufficient coating for
testing found on number of samples
specified in the protocol, vendor needs to
provide additional up to 12 pieces of
samples.
Issue a third party test report
Compositing is not allowed
Documentation of component testing is not
allowed
ANALYTICAL
* Lead In Surface Coating
US, MX,
ASIA, UK
Consumer
Product
Safety
Improveme
nt
Act of 2008
/ 16
CFR 1303 /
AOAC
974.02
(mod)
-- -- NA
(Non CPSIA item)
All accessible surface coatings shall not
contain lead in excess of 0.009% (90ppm)
of the weight of the total content of paint or
surface coating.
Report actual results or include data table
within report
Note: Component part testing (including
raw materials) is allowed.
In case of insufficient coating for testing
found on number of samples specified in
the protocol, vendor needs to provide
additional samples or component parts
(including raw materials) for testing.
allowed
Latest revision: 29 Mar, 2013 Page 13 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
Canada
Surface
Coating
Materials
Regulations
(SOR/2005
-109)
section 4
-- --NA
(Ship to US)
* Total lead content in
surface coating materials
The concentration of total lead present in a
surface coating material must not be more
than 90 mg/kg when a dried sample of it is
tested or the container (of a product used
in the note below) is labeled with the
appropriate warning (refer to labeling
section for details).
Report actual results or include data table
within report. Composite up to 3 colors is
allowed. If any color in the composite
exceeds 80% of the limit (72 mg/kg), based
on the lowest weight component, individual
colors will be analyzed.
Note:
- Applicable to a paint or other similar
material that is in its own container andmaterial that is in its own container and
dries to a solid film when a layer of it is
applied to a surface. Not applicable to
materials that become part of the
substrate.
- If lead content exceeds the limit, warning
label is allowed for paint or other similar
material that:
-is used as a touch-up coating on metal
surfaces;
-is used as material, for use by adult, for
the purposes of arts, crafts or hobbies.
Latest revision: 29 Mar, 2013 Page 14 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
Canada
Surface
Coating
Materials
Regulations
(SOR/2005
-109)
section 5
-- --NA
(Ship to US)
Total lead content in surface
coating materials - Lead
content information
If the concentration of total lead present in
a surface coating material that is used for a
purpose described in subsection 4(2) is
more than 90 mg/kg, the display panel
must contain the following information or its
equivalent:
DANGER
CONTAINS LEAD / CONTIENT DU
PLOMB
DO NOT APPLY TO SURFACES
ACCESSIBLE TO CHILDREN OR
PREGNANT WOMEN.
NE PAS APPLIQUER SUR UNE
SURFACE
ACCESSIBLE AUX ENFANTS OU AUX
FEMMES ENCEINTES.
Must be used exclusively [Insert the(Ship to US)
Must be used exclusively [Insert the
appropriate use or uses described in
subsection 4(2)]. / Utiliser uniquement
aux fins suivantes : [insérer les fins
mentionnées au paragraphe 4(2) qui s’
appliquent].
Note: Applicable clause in subsection 4(2):
(c) as a touch-up coating for metal
surfaces;
(g) as material for the purposes of arts,
crafts or hobbies, other than material for
use by children.
Latest revision: 29 Mar, 2013 Page 15 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
-- --NA
(Ship to US)
The expressions “Must be used exclusively
” and “Utiliser uniquement aux fins
suivantes :” must not be displayed in
capital letters, and the italicized
instructions must be replaced by the
appropriate use or uses.
In the case of a display panel area that is
less than 35 cm2, only the signal word “
DANGER” and the specific hazard
statements “CONTAINS LEAD” and “
CONTIENT DU PLOMB” need be
displayed.
If the information required is displayed in
separate English and French display
panels, the signal word “DANGER” must
be displayed in each display panel, but if
(Continued)
Total lead content in surface
coating materials - Lead
content information
Canada
Surface
Coating
Materials
Regulations
(SOR/2005
-109)
section 7
-- --NA
(Ship to US)
* Total mercury content in
surface coating materials
be displayed in each display panel, but if
the information is displayed in one bilingual
display panel, the signal word “DANGER”
need only be displayed once.
Children’s products shall not contain a
warning labeling.
The concentration of total mercury present
in a surface coating material must not be
more than 10 mg/kg when a dried sample
of it is tested.
Report actual results or include data table
within report. Composite up to 3 colors is
allowed. If any color in the composite
exceeds 80% of the limit based on the
lowest weight component, individual colors
will be analyzed.
Note:
- Applicable to a paint or other similar
material that is in its own container and
dries to a solid film when a layer of it is
applied to a surface. Not applicable to
materials that become part of the
substrate.
Latest revision: 29 Mar, 2013 Page 16 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
US, MX,
ASIA
AATCC 20A
-- -- NA
CN
AATCC
20/20A or
CAN/CGSB- NA
* Fiber analysis: quantitative
(If applicable)
Note: Do not conduct Fiber
ID testing during
Production, if the vendor
can provide previous CV
results for Fiber ID.
Previous results need to be
conducted within the last 6
months. If they are found
to be greater than 6
months old, then new Fiber
ID testing will take place.
If the vendor cannot
provide previous CV
testing results, lab is to
conduct Fiber ID testing.
‘+,- 0% Single Fiber (Claimed Single Fiber:
Test 1 Color)
+,- 5% Blends As Per Canadian Textile
Labeling And Advertising Regulations,
Blends must be within 3% tolerance as
required by FTC; 0% tolerance – Single
Fiber
CAN/CGSB-
4.2, No. 14
(14.1 –
14.18)
-- --NA
(Ship to US)
UK
Directive
96/74/EC &
UK SI 1986
No.26
BS 4407
ISO 1833
ISO 5088
-- --NA
(Ship to US)
CN
CHPA
Schedule I,
Part II, Item
11,
Consumer
products
containing
lead -
contact with
mouth
proposed
regulation
-- --NA
(Ship to US)
+/- 3 % of the claimed composition
conduct Fiber ID testing.Labeling And Advertising Regulations,
C.R.C., c. 1551, Section 30 (Claimed
Blends: Test all colors any variance found
exceeding 5% from claim, or between
colors, test full protocol for each color).
All accessible substrate materials in the as
received state shall not contain lead or lead
components in which the lead content is in
excess of 90mg/kg (ppm) of the weight of
the total content on items which:
- during normal use would require the
product be brought to the mouth, or
- are intended for children under 3 years of
age for use in learning or play
In case of insufficient substrate materials
for testing found on number of samples
specified in the protocol, vendor needs to
provide additional samples for testing.
Report actual results or include data table
within report
*Total lead content in
substrate
Compositing up to 3 colors is allowed
Latest revision: 29 Mar, 2013 Page 17 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
UK
Polymeric
Materials:
EN 1122
Method B
Metal Parts
Acid
digestion /
AAS
-- --NA
(Ship to US)
** Cadmium Content
(Applicable to Plastic, Paints
on painted articles, Paint,
Paint with zinc content
exceeding 10% by weight of
paint and Metal Parts of
Jewelry)
Regulation (EU) 494/2011
ANNEX XVII, REACH∙ Plastic: ≤ 0.01%∙ Paint on painted articles: ≤ 0.1%(on or after Dec 10, 2011, products place
on the market)
≤ 0.01% (before Dec 10, 2011;follows Regulation (EC) 552/2009 ANNEX
XVII, REACH)∙ Paint: Prohibited∙ Paint with zinc content exceeding10% by weight of paint: ≤ 0.1%∙ Metal parts of Jewelry: ≤ 0.01%
UK
ISO 14184-
1 -- --
NA
(Ship to US)
UK
MTS In
house
method -- --
NA
(Ship to US)
UK
MTS In
house
method
(Document
Review)
-- --NA
(Ship to US)
Babies: less than 20mg/kg (not
detectable),
Adults : 75 ppm maximum
* Dimethyl Furmarate (DMF)
* Any fabric, leather, wood
and desiccant (silica gel)
packets.
* When product comes in
contact with skin, test up to 3
like materials of the largest
surface area.
NOTE:
Vendor to provide
PKGDesiccant document
and testing should only be
completed if vendor can
not provide signed
document.
* Formaldehyde (free &
hydrolysed)
* Pentachlorophenol PCP
content (For Wood Item
Only)
Document review is
accepted.
If no document can be
provided, testing shall be
conducted.
Shall not exceed 5 mg/kg. (According to
ChemG)
Products placed or made available on the
market shall comply with the requirements
of Directive 2009/251/EC.
Max limit: 0.1 mg DMF per kg of the
product or part of product.
Effective date: 01 May 2009.
NOTE:
- If the form is not filled out and
attached in the TRF, please ask the
vendor to return this form and copy
Costco QA.
- If the form is not returned within 5
days of sending the vendor the
document, please proceed with testing
and advise Costco QA.
- If the vendor cannot or will not return
the form, please proceed with testingLatest revision: 29 Mar, 2013 Page 18 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
UK
Textiles/lea
ther:
Methanol/A
CN
extraction
followed by
LC-MS
Plastics/pri
nts:
THF/ACN
extraction
followed by
LC-MS
-- --NA
(Ship to US)
1000 mg/kg
APEO
Alkylphenolethoxylates
Directive 2003/53/EC
(For Product Made in UK
Only)
UK
DIN 53314
1/1/1996
German
Food and
Commoditi
es Law
Section 30
-- --NA
(Ship to US)
UK
BS 5666-
6:1983 NF
B51-
97:2004
-- --NA
(Ship to US)
* Chromium VI
(for leather items)
* Pentachlorophenol PCP
content
(Textiles and Leather)
<3mg/kg
<5mg/kg.
Latest revision: 29 Mar, 2013 Page 19 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
EN 14362-
1 (for
Natural
fibers) &
EN 14362-
2 (for
Synthetic
fibers / ISO
DIS
17234:2003
(for
Leathers)
/ UK SI No.
3310 of
2003 -
-- --NA
(Ship to US)
* AZO Colorants Allowable Limit: 30 ppm for Azo Dyes
Note:
1. Applicable to carrying handle and
carrying straps or other areas in prolonged
skin contact - textile and leather straps or
handles only.
2. Maximum 3 Colors of like materials of
the same fiber tested @ Once; If Positive,
Each Will Be Tested Separately, and Each
Color Charged Separately.
2003 -
Control of
Azo Dyes
and Blue
Colorant
Regulations
UK SI No.
3310 of
2003 -
Control of
Azo Dyes
and Blue
Colourant
Regulations
-- --NA
(Ship to US)
UK
As required
Directive
83/264/EC
&
2003/11/EC
h
amendmen
ts to the
Council
Directive
76/769/EE
C
-- --NA
(Ship to US)
* Flame retardants
(if applicable)
* Blue colorant in textile
83/264/EEC:
tris(2,3 dibromopropyl)- phosphate: Usage
Banned
tris- (aziridinyl)- phosphinoxide (TEPA):
Usage Banned
polybrominatedbiphenyls (PBB): Usage
Banned
For 2003/11/EC
PentaBDE Limit: 0.1%
OctaBDE Limit: 0.1%
Applicable to carrying handle and carrying
straps or other areas in prolonged skin
contact - textile and leather straps or
handles only.
Blue Colourant Restricted to 0.1% by Mass
Latest revision: 29 Mar, 2013 Page 20 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
UK
Solvent
Extraction/G
CMS
-- --NA
(Ship to US)
Regulation(EU)276/2010
Annex XVII,REACH≤0.1%(Tri-substituted OrganostannicCompounds)
( Effective date: 1 July 2010)≤0.1%(Dibutyltin(DBT) Compounds)(Effective date:1 January 2012)≤0.1%(Di-octyltin(DOT)Compounds)(Effective date:1 January 2012)
In lieu of testing, approved letter of
guarantee can be submitted
*Organotin (express as tin)
(Suggested materials to test
are plastic, paint, coating)
Tri-substituted Organostannic
Compounds
Dibutyltin (DBT)
(except food contact
materials)
Di-octyltin(DOT)
Scope:
1. Textile articles intended to
come into contact with the
skin
2. Gloves
3.Footware or part of
UK
EC / 1907 /
2006
GC/MS;
LC/MS; ICP;
UV-Vis; XRF
-- --NA
(Ship to US)
* REACH SVHC
- Products
Shall not contain SVHC greater than 0.1%
per article according to the most updated
SVHC list.
In lieu of testing, a DoC or test report
dated within one year can be submitted
for document review.
Note:
1. If no DoC or test reports are given
before testing is complete or within 10
working days from advising the DoC is
required, fail in the test report and no DoC
was accepted.
2. For retest, only proceed with the core
testing requirements as outlined in the RSL
program.
3.Footware or part of
footware intended to come
into contact with the skin
4. Childcare articles
Latest revision: 29 Mar, 2013 Page 21 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
UK
EC / 1907 /
2006
GC/MS;
LC/MS; ICP;
UV-Vis; XRF
-- --NA
(Ship to US)
* REACH SVHC
- Packaging
Shall not contain SVHC greater than 0.1%
per article according to the most updated
SVHC list.
In lieu of testing, a DoC or test report
dated within one year can be submitted
for document review.
Note:
1. If no DoC or test reports are given
before testing is complete or within 10
working days from advising the DoC is
required, fail in the test report and no DoC
was accepted.
2. For retest, only proceed with the core
testing requirements as outlined in the RSL
program.
KR
Korea Safety
Quality
Labeling
Annex 10 /
KS M 1998
(2009)
-- --NA
(Ship to US)
KR
Korea Safety
Quality
Labeling
Annex 3 /
KS K ISO
3071, KS M
ISO 17226 -- --
NA
(Ship to US)
* Formaldehyde content in
wood
Document review is
accepted.
If no document can be
provided, testing shall be
conducted.
All (accessible and inaccessible) wood
components in furniture (for all ages) shall
have formaldehyde content comply with
one of the following limits:
a. Shall be less than 1.5mg/L using
desiccator method,
Or.
b. Shall be less than 0.12 mg/m2.h using
small chamber method.
Note: Applicable to composite wood
products including but not limited to
particleboard, mediumdensity fibreboard or
plywood, etc.
*Formaldehyde
(Leather products: Products
having surface covered with
more than 60 % of genuine
leather, synthetic leather, and
genuine fur)
Document review is
accepted.
If no document can be
provided, testing shall be
conducted.
Genuine Leather: Less than 300 (mg/kg)
Synthetic Leather: Less than 300 (mg/kg)
Genuine Fur: Less than 300 (mg/kg)
Note: The formaldehyde content of leather
products contacting with skin directly
(gloves, pants, etc.) shall be less than 75
mg/kg.
Latest revision: 29 Mar, 2013 Page 22 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
KR
Korea Safety
Quality
Labeling
Annex 3 /
KS K 0733 -- --
NA
(Ship to US)
KR
Korea Safety
Quality
Labeling
Annex 3 /
*Chromium (VI)
(Leather products: Products
having surface covered with
more than 60 % of genuine
leather, synthetic leather, and
Genuine Leather: Less than 3 (mg/kg)
Synthetic Leather: Less than 0.5 (mg/kg)
Genuine Fur: Less than 3 (mg/kg)
Genuine Leather: Less than 5 (mg/kg)
Synthetic Leather: Less than 0.5 (mg/kg)
Genuine Fur: Less than 5 (mg/kg)
*PCP
(Leather products: Products
having surface covered with
more than 60 % of genuine
leather, synthetic leather, and
genuine fur)
Document review is
accepted.
If no document can be
provided, testing shall be
conducted.
Annex 3 /
KS M 6902,
KS M ISO
17025
-- --NA
(Ship to US)
KR
Korea Safety
Quality
Labeling
Annex 3 / /
Dimethyl
fumarate test
method in
Selfregulator
y
Safety
Confirmation
- Annex 4
(Textile
products for
infant)
-- --NA
(Ship to US)
US
Solvent
extraction /
GC-MS or
HPLC-MS
analysis /
Costco
Requirement
-- --NA
(No foam)
* Flame retardants content -
TDCPP
Foam in furniture shall not contain any
detectable level of Tris(1,3-dichloro-2-
propyl) phosphate (TDCPP) (CAS no.
13674-87-8). (MTS reporting limits are 5
mg/kg)
Report actual results or include data table
within report
Client requirement
leather, synthetic leather, and
genuine fur)
Document review is
accepted.
If no document can be
provided, testing shall be
conducted.
* Dimethyl fumarate
(Leather products: Products
having surface covered with
more than 60 % of genuine
leather, synthetic leather, and
genuine fur)
Document review is
accepted.
If no document can be
provided, testing shall be
conducted.
Genuine Leather: Less than 0.1 (mg/kg)
Synthetic Leather: Less than 0.1 (mg/kg)
Genuine Fur: Less than 0.1 (mg/kg)
Client requirementLatest revision: 29 Mar, 2013 Page 23 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MTS Report Number:
13-Dec-13 Result Reviewed by:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 000.4 - Costco
Regulatory Furniture Protocol
63113-09010ZTS
LL
TESTED PROPERTY REQUIREMENT RESULTS
Key:
**Mandatory Requirement
Note: It is the Vendor's responsibility to ensure that the products comply with all United States Federal,
States, and local laws, regulations, and ordinances. A Pass Lab test result does not constitute a
certification that a vendor's products meet all legal requirements. It is the vendor's responsibility to
manufacture their items to comply with all applicable laws and in conformance with the purchase order
terms and conditions.
IMPORTANT NOTICE: Please review the Actual Products against the updated Requirements/Regulation. Prior to testing
and communicate with clients if additional test required. This protocol is the basic guidelines to follow and does not
replace the content of the standard. (For Silverware additional test should be included)
*Additional Charge For This Test
Latest revision: 29 Mar, 2013 Page 24 of 24
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
Packaging/
Materials/
Component
s
Submitted by
Vendor?
(Yes/No)
LEAD CADMIUM MERCURYHexaval
ent
CHROMI
UM
TOTAL HEAVY
METALS FOR EACH
PACKAGING
COMPONENT
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
PK - 94/62 - EC - UK / TPCH-US - Costco
63113-09010
LL13-Dec-13 Result Reviewed by:
All packaging materials and components used on an item sold in the U.K. (US) will be tested to 94/62 EC (US TPCH).
This law sets limits for the amount of toxic heavy metals that are present in outer and inner packaging materials and
components such as color box or color label, master carton, stickers, tape, banding materials, wrapping papers,
banding straps and inks. This regulation applies to everything tested for Costco Wholesale- apparel, home textiles and
hard goods.
UK Toxics in Packaging Materials Directive / US Toxics in Packaging Clearing House (TPCH)
ZTS MTS Report Number:
Costco Wholesale requires that the lab test all materials and/or components. The lab can use up to 5 like components
in one composite test. No more than a total of 5 composite test should be conducted (Like materials to be composited
and each composite containing an equal weight of the 5 components).
If result exceeds 100ppm, testing to be performed on each individual component within the composite and results will
be reported per each individual component.
ANALYTICAL METHOD: A weighted portion of the dried substrate material is digested with nitric acid for total metals
content. After digestion, the sample is filtered and brought to a known volume, and then analyzed for the four metals
using AA or ICP analysis.
Selects Randomly Chosen
Components, and indicate with
an "X" which ones were tested.
s COMPONENT
(SHOULD NOT
EXCEED 100 PPM)
Master CartonYes <10 <10 <10 <10 <40
Ink used for
printing of
Master Carton
- All Colors
Yes <10 <10 <10 <10 <40
Polybag Yes <10 <10 <10 <10 <40
Ink used for
printing of Poly
bag - All
Colors
Yes <10 <10 <10 <10 <40
Blister
(Clamshell) No -- -- -- -- --
Blister Card -
All designs or
stylesNo -- -- -- -- --
Instruction
Sheet Yes <10 <10 <10 <10 <40
Printed label
for different
designs or
styles
Yes <10 <10 <10 <10 <40
Adhesive tape
for different
styles and
sizes
Yes <10 <10 <10 <10 <40
Insert card for
different
designs or No -- -- -- -- --
X
--
X
X
X
X
X
--
X
--
styles
Latest revision: 15 Mar 2011 Page 1 of 3
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
PK - 94/62 - EC - UK / TPCH-US - Costco
63113-09010
LL13-Dec-13 Result Reviewed by:
UK Toxics in Packaging Materials Directive / US Toxics in Packaging Clearing House (TPCH)
ZTS MTS Report Number:
Tissue paper -
All Colors No -- -- -- -- --
Window box
with window
sheet for
different
designs or
styles
No -- -- -- -- --
Plastic screw
holder for
different colorNo -- -- -- -- --
Hang tagNo -- -- -- -- --
Cable Tie No -- -- -- -- --
Plastic wire or
metal wire
(twist ties)No -- -- -- -- ----
--
--
--
--
--
Plastic
(Banding
Strap)Yes <10 <10 <10 <10 <40
Plastic
Fastener used
to tighen
banding strapNo -- -- -- -- --
FoamYes <10 <10 <10 <10 <40
Staple Yes <10 <10 <10 <10 <40
Khaki paperYes <10 <10 <10 <10 <40
This is a list of the types of packaging components and the number of samples to be sent to MTS. To avoid
delays, please be sure ALL packaging-related components are submitted, even if they are not on the list.
Contact MTS for the required number of samples if the component is not on the list.
IMPORTANT NOTICE: Please review the Actual Products against the updated Requirements/Regulation. Prior to testing
and communicate with clients if additional test required. This protocol is the basic guidelines to follow and does not
replace the content of the standard. (For Silverware additional test should be included)
X
X
Note: It is the Vendor's responsibility to ensure that the products comply with all EU (US), and local laws,
regulations, and ordinances. A Pass Lab test result does not constitute a certification that a vendor's
products meet all legal requirements. It is the vendor's responsibility to manufacture their items to comply
with all applicable laws and in conformance with the purchase order terms and conditions.
--
X
X
Contact MTS for the required number of samples if the component is not on the list.
Latest revision: 15 Mar 2011 Page 2 of 3
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
PK - 94/62 - EC - UK / TPCH-US - Costco
63113-09010
LL13-Dec-13 Result Reviewed by:
UK Toxics in Packaging Materials Directive / US Toxics in Packaging Clearing House (TPCH)
ZTS MTS Report Number:
Plastic wire or Metal wire (Twist ties)
1 Pc
Blister (Clamshell) 10 pcs
Blister Card - All designs or styles 5 pcs each
Ink used for printing of Master Carton - all colors
50 gm
1 roll each
50 mL per color
Master Carton
Polybag 10 pcs
Ink used for printing of Polybag - all colors 50 mL per color
Cable Tie 10 pcs (Approximate 20 cm length for one piece)
Insert card for different designs or styles 16 pcs each
3 pcs per color
Window Box w/Sheet for different designs or styles 2 pcs each
Plastic screw holder for different color 10 pcs each
Tissue paper - All Colors
Hang Tag 5 pcs
Instruction Sheet 3 pcs
Printed label for different designs or styles 5 pcs each
Adhesive Tape for different styles and sizes
Plastic Fastener used to tighen banding straps. 12 pcs
Plastic wire or Metal wire (Twist ties)
Plastic Plastie (Banding Strap) 5 feet
50 gm
Latest revision: 15 Mar 2011 Page 3 of 3
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Consumer
Product
Safety
Improvement
Act of 2008
X
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 014 - US - Costco
CPSIA New Requirements
ZTS
Every manufacturer of a product subject to
a consumer product safety rule under this
Act or similar rule, ban, standard, or
regulation under any other Act enforced by
the Commission and which is imported for
consumption or warehousing or distributed
in commerce shall issue a certificate which:
• is in English
• identifies the manufacturer or private
labeler issuing the certificate and any third
party
conformity assessment body on whose
testing the certificate depends
• includes, at a minimum, the date and
place of manufacture, the date and place
where the product was tested, each party’s
name, full mailing address, telephone
LABELINGGeneral conformity certificate
(Doc Review)
MTS Report Number: 63113-09010
TESTED PROPERTY REQUIREMENT
LL
RESULTS
13-Dec-13 Result Reviewed by:
X
Consumer
Product
Safety
Improvement
Act of 2008
-- --NA
Not children's product
Tracking labels for children's
products
A permanent and distinguishing mark or
code on the product and its packaging, to
the extent practicable, allows the
manufacturer and purchaser to ascertain
the name of the manufacturer or private
labeler, location and date of production of
the product.
Verified the Presence only. The accuracy
of tracking label will not be verified.
Effective Aug. 14, 2009
Until Aug. 14, 2009, this is a client
requirement
name, full mailing address, telephone
number, and contact information for the
individual responsible for maintaining
records of test results
• specifies each rule, ban, standard, or
regulation applicable to the product
Products without the required certificate
cannot be imported or distributed in
commerce in the United States. The
certificate must accompany the product
or product shipment and must be
available to CPSC and Customs and
Border Patrol upon request.
Effective November 12, 2008
ANALYTICAL
Latest revision: 28 Mar 2013 Page 1 of 5
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 014 - US - Costco
CPSIA New Requirements
ZTS MTS Report Number: 63113-09010
TESTED PROPERTY REQUIREMENT
LL
RESULTS
13-Dec-13 Result Reviewed by:
Consumer
Product
Safety
Improvement
Act of 2008
X See test result 1
Consumer
All accessible surface coatings shall not
contain lead in excess of 0.009% (90ppm)
of the weight of the total content of paint or
surface coating.
Report actual results or include data table
within report
Note: In case of insufficient coating for
testing found on number of samples
specified in the protocol, vendor needs to
provide additional up to 14 pieces of
samples.
Issue a third party test report
Documentation of component testing is not
allowed
* 16 CFR 1303 Lead content
(Costco Requirement - the
sample of Mexico
submission shall also
comply with this
requirement)
* CPSC Total lead content in All accessible substrates on items intended forConsumer
Product
Safety
Improvement
Act of 2008
-- --NA
Not children's product
* CPSC Total lead content in
substrate material
(Costco Requirement - the
sample of Mexico
submission shall also
comply with this
requirement)
All accessible substrates on items intended for
children ages 14 and under shall not contain lead
in excess of 0.01% (100ppm) of the weight of the
total content.
Note: The following materials will be exempted
from testing; it is the vendors responsibility to
ensure compliance to the applicable requirements:
a. Accessible electronics:
- Lead blended into the glass of cathode ray tubes,
electronic components and fluorescent tubes.
- Lead used as an alloying element in steel. (Max.
amount of lead < 0.35% by weight)
- Lead used in the manufacture of aluminum.
(Max. amount of lead < 0.4% by weight)
- Lead used in copper-based alloys. (Max. amount
of lead < 4% by weight)
- Lead used in lead-bronze bearing shells and
bushings.
- Lead used in compliant pin connector systems.
- Lead used in optical and filter glass.
- Lead oxide in plasma display panels (PDP) and
surface conduction electron emitter displays
(SED) used in structural elements; notably in the
front and rear glass dielectric layer, the bus
electrode, the black stripe, the address electrode,
the barrier ribs, the seal frit and frit ring as well as
in print pastes.
- Lead oxide in the glass envelope of Black Light
Blue (BLB) lamps
b. Spare parts or other removable components
(such as battery packs and light bulbs) shall be
considered inaccessible provided that lead
containing component is inaccessible when the
product is assembled in functional form or in the
criteria for exemption.
Latest revision: 28 Mar 2013 Page 2 of 5
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 014 - US - Costco
CPSIA New Requirements
ZTS MTS Report Number: 63113-09010
TESTED PROPERTY REQUIREMENT
LL
RESULTS
13-Dec-13 Result Reviewed by:
Consumer
Product
Safety
Improvement
Act of 2008
* CPSC Total lead content in
substrate material
(Costco Requirement - the
sample of Mexico
submission shall also
comply with this
requirement)
[Continued from above]
c. Ordinary children's books printed after 1985.
Ordinary is defined as one that is published on
cardboard or paper printed by conventional
methods and intended to be read. This excludes
children's books that have plastic, metal or
electronic parts.
d. Dyed or undyed natural or synthetic textiles (not
including leather, vinyl or PVC)
e. Precious gemstones: diamond, ruby, sapphire,
emerald
f. Certain semiprecious gemstones provided that
the mineral or material is not based on lead or
lead compounds, this does not include materials
such as, aragonite, bayldonite, boledite, cerussite,
crocoite, linarite, mimetite, phosgenite, vanadinite
and wulfenite as these are known to contain lead.
g. Natural or cultured pearls
h. Wood
-- --NA
Not children's product
Consumer
Product
Safety
Improvement
Act of 2008
-- --NA
Not children's product
* CPSC Total lead content in
substrate material
(Costco Requirement - the
sample of Mexico
submission shall also
comply with this
requirement)
[Continued from above]
In case of insufficient material for testing
found on number of samples specified in
the protocol, vendor needs to provide
additional samples for testing.
Report actual results or include data table
within report
Issue a program audit report (until
February 2010) Component testing is not
allowed,
.
h. Wood
i. Natural fibers such as cotton, silk, wool, hemp,
flax, linen
j. Other natural materials including coral, amber,
feathers, fur, untreated leather
k. Certain metals and alloys contains no lead or
lead-containing metals is intentionally added like
Surgical steel, Precious metals like gold, sterling
silver, platinum, palladium, rhodium, osmium,
iridium, ruthenium which do not extend to the non-
steel or non-precious metal components of a
product such as solder or base materials in
electroplate, clad or fill applications
l. Until May 1, 2011, a SOE shall apply to the
following parts for Youth Motorized Recreational
Vehicles:
- battery terminals containing up to 100 percent
lead
- components made with metal alloys, including
- steel containing up to 0.35 percent lead, -
aluminum with up to 0.4 percent lead,
- copper with up to 4.0 percent lead
Latest revision: 28 Mar 2013 Page 3 of 5
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 014 - US - Costco
CPSIA New Requirements
ZTS MTS Report Number: 63113-09010
TESTED PROPERTY REQUIREMENT
LL
RESULTS
13-Dec-13 Result Reviewed by:
Consumer
Product
Safety
Improvement
Act of 2008
-- --
NA
Not children's metal
jewelry
Any accessible metal component of items
intended for children ages 14 and under
shall not contain lead in excess of 0.01%
(100ppm) of the weight of the total content.
Note: The lead limit will be reduced, if
technologically feasible, to 0.01%
(100ppm) on Aug. 14, 2011.
Components composed of surgical steel,
gold (at least 10 karat), sterling silver (at
least 925/1000), platinum, palladium,
rhodium, osmium, iridium, and ruthenium
are exempt. Any non-precious metal
components such as solder, base metal in
electroplate and fill are not included in
these exemptions and must comply.
Report actual results or include data table
within report
* CPSIA Total lead in
children's metal jewelry
within report
Issue a third party test report
Component testing is not allowed
Documentation of component testing is not
allowed
Effective Aug. 14, 2009, the CPSIA limit of
600 ppm, will be reduced to 300 ppm.
Until Aug. 14, 2009, the 300 ppm is a client
requirement.
Latest revision: 28 Mar 2013 Page 4 of 5
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 014 - US - Costco
CPSIA New Requirements
ZTS MTS Report Number: 63113-09010
TESTED PROPERTY REQUIREMENT
LL
RESULTS
13-Dec-13 Result Reviewed by:
CPSIA, Title
I, Section 108
/ Costco
Requirement
-- -- NA
* CPSIA Phthalates Ban
(Costco Requirement - the
sample of Mexico
submission shall also
comply with this
requirement)
Actual testing would be conducted on all
accessible plastics materials (including natural
and synthetic rubber), plasticizer print, scrapable
surface coatings, decals, polymeric coated
materials (unscrapable), adhesives and sealants
(exclude adhesive for stickers), toy nail polish,
reusable packaging, electrical plug and cables.
Vendor shall be responsible for the compliance of
all other accessible materials.
Children's toys and childcare articles, before and
after use and abuse testing, shall not contain
concentrations of more than 0.1% BBP, DBP or
DEHP, individually.
Children's toys that can be placed in the mouth or
childcare articles, before and after use and abuse
testing, shall not contain concentrations of more
than 0.1% DINP, DIDP or DnOP, individually.
NOTE:
1. The lead limit shall not apply to an off-highway vehicle.
2. For metal component part of bicyles and related products, the lead limit shall not be more than 300 ppm.
3. The lead limit shall not apply to a used children’s product which was obtained by the seller for use and not for the
purpose of resale and also children’s product which was donated to the seller for charitable distribution or resale to
support charitable purposes. The term “used children product” does not include: 1) children’s metal jewelry, 2) any
children’s product for which the donating party or the seller has actual knowledge that the product is in violation of the
lead limits in this section, 3) any other children’s product or product category that the Commission determines, after
notice and a hearing
4. Exclusion of 3rd party testing requirement of lead content on ordinary books or ordinary paper-based printed
materials. The term “ordinary book” does not include books with inherent play value, books designed or intended for a
child 3 years of age or younger, and does not include any toy or other article that is not a book that is sold or packaged
with an ordinary book.
5. Exclusion of 3rd party testing requirement of lead content on metal component parts of bicycles.
Note: It is the Vendor's responsibility to ensure that the products comply with all United States Federal,
States, and local laws, regulations, and ordinances. A Pass Lab test result does not constitute a certification
that a vendor's products meet all legal requirements. It is the vendor's responsibility to manufacture their
items to comply with all applicable laws and in conformance with the purchase order terms and conditions.
than 0.1% DINP, DIDP or DnOP, individually.
In case of insufficient material for testing found on
number of samples specified in the protocol,
vendor needs to provide components/parts for
testing.
Report actual results or include data table within
report.
Issue a third party test report.
Component testing is allowed.
Compositing up to 3 like materials is allowed.
IMPORTANT NOTICE: Please review the Actual Products against the updated Requirements/Regulation. Prior to testing and
communicate with clients if additional test required. This protocol is the basic guidelines to follow and does not replace the content of
the standard.
Key:
*Additional Charge For This Test **Mandatory RequirementLatest revision: 28 Mar 2013 Page 5 of 5
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Visual -- --
On 2 side panels andbottom
Visual
-- -- On bottom
Master Carton Markings Report Actual, The master cartonMarkings on 4 side panels or on bottomone panel.
Warning Symbols
ITEM./ART. ?????COSTCO P.O. #GW______kg, ______lbNW______kg, ______lb_________m3______cbfMADE IN ????? (CHINA)FABRIQUÉ EN ????? (CHINE)HECHO EN ?????? (CHINA)Report if present and the location or
LABELING
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
Verify Master Carton Markings
ZTS MTS Report Number: 63113-09010
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
SP - 100 - US / CN / UK
CWC
Visual
-- -- No print
Visual
-- -- No print
Visual
-- -- On 2 side panels
Visual -- -- In black ink
Warning Symbols
SYMBOL – HEAVYIf symbol is used it should appear on all 4side panels of the master carton. Ifmaster carton is the sell unit carton,symbol should not be on front panel.Report Actual
Ink Color Report Actual, Should be in Black Ink
Warning Symbols SYMBOL – DIRECTION
If symbol is used it should appear on all 4side panels of the master carton. If mastercarton is the sell unit carton, symbol shouldnot be on front panel. Report actual
Warning Symbols
SYMBOL – FRAGILEIf symbol is used it should appear on all 4side panels of the master carton. If mastercarton is the sell unit carton, symbol shouldnot be on front panel. Report actual
locations of the Master Carton
Latest revision: 24 Sep, 2012
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass FailPK-900
X
PK-907
-- -- Not Requested
PK-066
-- -- Not Requested
Note: It is the Vendor's responsibility to ensure that the products comply with all United States Federal,
States, and local laws, regulations, and ordinances. A Pass Lab test result does not constitute a
IMPORTANT NOTICE: Please review the Actual Products against the updated Requirements/Regulation. Prior to testing
and communicate with clients if additional test required. This protocol is the basic guidelines to follow and does not
replace the content of the standard. (For Silverware additional test should be included)
Transit Test - ISTA 1A / 1B
Transit Test - ISTA 3A
Master Carton Compression
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
PK - 001 - Costco
Packaging Performance Test
LXG MTS Report Number: 63113-09010
LL
TESTED PROPERTY REQUIREMENT RESULTS
13-Dec-13 Result Reviewed by:
Key:
States, and local laws, regulations, and ordinances. A Pass Lab test result does not constitute a
certification that a vendor's products meet all legal requirements. It is the vendor's responsibility to
manufacture their items to comply with all applicable laws and in conformance with the purchase order
*Additional Charge For This Test **Mandatory Requirement
Page 1 of 1
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
Visual Over packaging Report if over packaging is provided.
Over Packaging
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
Special Rating Instruction:
Drop Test only for glass, ceramics or any breakable Houseware items (D32), and rating as below:
1A drop test:
1-3 drops with breakage noted = Unsatisfactory rating
4-10 drops with breakage noted = DATA only
1 - 10 drops with no breakage noted = Satisfactory rating
1B drop test:
1-3 drops with breakage noted = Unsatisfactory rating
4-6 drops with breakage noted = DATA only
1 - 6 drops with no breakage noted = Satisfactory rating
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
PK - 900 - US - Costco
Packaged Product Transit Testing ISTA 1A/1B
LXG MTS Report Number: 63113-09010
Visual
-- -- With overpackaging
H-20001 /
Std.
Measure-- -- 73-1/4''
H-20001 /
Std.
Measure-- -- 30-1/2''
H-20001 /
Std.
Measure-- -- 7-3/4''
H-20001 /
Std.
Measure-- -- 95.7 lbs
Visual -- -- Double wall corrugated
Visual -- -- Brown with color label
H-20001 /
Std.
Measure-- -- 4.45 mm
Dimension - Thickness of
master carton board (mm)
[Package Product]
[Material Qualities]
Inspection/Identification.
Material Type - Composition [Package Product]
[Material Qualities]
Inspection/Identification.
Width (inch) [Package Product]
[Physical Dimension]
Standard Measure.
Depth (inch) [Package Product]
[Physical Dimension]
Standard Measure.
Material Face Color [Material Quality]
Inspection/Identification.
CONSTRUCTION QUALITIES
Over packaging Report if over packaging is provided.
PHYSICAL CHARACTERISTICS
Weight (lbs) [Package Product]
[Physical Dimension]
Standard Measure.
[Package Product]
[Physical Dimension]
Standard Measure.
Length (inch)
Latest revision: 19 Jun 2013 Page 1 of 3
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
PK - 900 - US - Costco
Packaged Product Transit Testing ISTA 1A/1B
LXG MTS Report Number: 63113-09010
Visual
X
Visual
X
Visual Inspection
Visual Inspection [Packaged Product]
No Major Defects/ No Breaks in or crushing
of the packaging - The package product
shall not be opened prior to testing unless
there is a sign of damage such as rattling.
In this case, the package can be opened
and the items inspected for damage.
Damaged product will not be tested. Inner
packaging must not be disturbed in a
manner to compromise test results after
resealing the package.
[Over Packaging]
No major defects/ No breaks in or crushing
of the over-packaging.
Visual
X
ISTA 1A
2010
Sequence 1
X
ISTA 1A
2010
Sequence 2
X
PERFORMANCE
Shock - drop [Applicable for Packaged-Products
weighing 150 lb (68 kg) or Less]
[Test Procedure]
[Impact]
No major damage after 10 drops from a
specific height in a specific sequence as
described in ISTA 2001 Procedure 1A
If Possible Report On Which Drop Damage
Occurred (By Sound)
(Rating guideline - see note 1)
Vibration - fixed
displacement
[Applicable for Packaged-Products
weighing 150 lb (68 kg) or Less]
[Test Procedure]
[Vibration]
No Major Defects after 14,200 vibration
impacts.
(Rating guideline - see note 1)
Staples are not permitted in the
construction of the carton except along the
bottom or along the manufacturer's edge
only. Steel strapping is not permitted.
Plastic strapping is permitted but the
securing device/method (i.e. Buckle) must
not contain or create a sharp point or
edges.
Hazards
Latest revision: 19 Jun 2013 Page 2 of 3
Client Code: -- Technician:
Start Date: 2-Dec-13 Finish Date:
TEST CODE COMMENTS
Pass Fail
13-Dec-13 Result Reviewed by: LL
TESTED PROPERTY REQUIREMENT RESULTS
MODERN TESTING SERVICES TEST PROTOCOL
SUMMARY OF TEST RESULTS FOR
PK - 900 - US - Costco
Packaged Product Transit Testing ISTA 1A/1B
LXG MTS Report Number: 63113-09010
ISTA 1B
2010
Sequence 1
-- --NA
Less than 150 lbs
ISTA 1B
2010
Sequence 2
-- --NA
Less than 150 lbs
[Applicable for Packaged-Products
weighing Over 150 lb (68 kg)]
[Test Procedure]
[Vibration]
No Major Defects after 11,800 vibration
impacts.
(Rating guideline - see note 1)
Vibration - fixed
displacement
Shock - drop [Applicable for Packaged-Products
weighing Over 150 lb (68 kg)]
[Test Procedure]
[Impact]
No major damage after 6 drops from a
specific height in a specific sequence as
described in ISTA 2001 Procedure 1B
Visual
-- --NA
Not electrical product
Key:
Note: It is the Vendor's responsibility to ensure that the products comply with all United States Federal,
States, and local laws, regulations, and ordinances. A Pass Lab test result does not constitute a certification
that a vendor's products meet all legal requirements. It is the vendor's responsibility to manufacture their
items to comply with all applicable laws and in conformance with the purchase order terms and conditions.
IMPORTANT NOTICE: Please review the Actual Products against the updated Requirements/Regulation. Prior to testing
and communicate with clients if additional test required. This protocol is the basic guidelines to follow and does not
replace the content of the standard. (For Silverware additional test should be included)
[Test Procedure]
No damage to electrical components. Must
functions as intended (ex. Battery
operated: Place batteries in switch to ON,
cord (Electrical) plug in sample, Switch to
ON).
Inspection of Electrical
Samples After Testing
*Additional Charge For This Test
If Possible Report On Which Drop Damage
Occurred (By Sound)
(Rating guideline - see note 1)
**Mandatory Requirement
Latest revision: 19 Jun 2013 Page 3 of 3
��������������
����������
��������������� ������� ���
�������� �����������������
�������
�������������
�������������������� �����!������"�"�� #���
����������$�"��� ��%��&����������&'��&���&� #���
��������%���"$$"�� ��������������������
(������������� %�!�����)%*� +,-+./ ����������$�"��� ��������������
��������
%�
������������������$�
������������������ %�� 0� ��$����� ��1����%����!����
%��� 0� ��$����� ��1����%����!���2��3����������
,4��54(���� � �� ���6��
� �7��7���88��97�-7���
���������1�"�� �"�����1�%������� ���"���)�,� 4(���* �,� 4(���
%��2�����$��2�"���
��):�*�;����!�����"�!��;����;��2��1���������"��1�:"�;"���;"$�$;"2��������2�"�$�:"�;������22�"����������$����$��������"��$���1
$���1��1$��������1��!��;�� % �
�;�������:"�������$����$�$���1��1$���1��������"��$��22�!������;"$�2��1����
���������������������������
����� !� ����������"�����������"
,��8�<���
��4������ ��%�� � (��' ������
#���74'=���>�����
�� 7��7���
#����� �������$� ���� �
���
������������ ����$������%����
���������������#�� ����
���>���'
�%� ��5#���%��� ��4������ ��%�� � (��' ������
<<<���?���(�9���%%�@'�#�5��<-��.
'%�
����/,-�%#��6����(�������&4'���5�
#�� ��&���%�(� ��>������4'=���� (�9�� �
#���
�8+�/8�8-��� -,8�/<�8,,,8-/<
���"�A�"���"������