Installation instructions Toyota Corolla Verso

128 8225 1.02

(Built from 07/2004)

GBEnglish

EGO TS

Table of contents

1 Introduction / Preface ................................................................... 3

2 Safety Instructions ...................................................................... 4

3 Conformity statement ................................................................. 5

4 Scope of Delivery / Package content ........................................... 6

5 Installation instructions .............................................................. 7

5.1 Preparation ............................................................................................ 7

5.2 Installation locations ............................................................................. 75.2.1 Checking cable lengths ................................................................................................ 7

5.2.2 Selection of the installation location for the electronics box ...................................... 7

5.2.3 Selection of the point of installation for the microphone ............................................ 8

5.3 Mounting Components ........................................................................... 95.3.1 Mounting the electronics box ....................................................................................... 9

5.3.2 Mounting the microphone ............................................................................................ 9

5.4 Connection Concept ............................................................................... 10

5.5 Installation of the components .............................................................. 10

5.6 Functional Test ...................................................................................... 14

5.7 Symbols ................................................................................................. 145.7.1 Key functions ................................................................................................................ 14

5.8 Getting started ....................................................................................... 155.8.1 On / Off function ........................................................................................................... 15

5.8.2 Coupling ........................................................................................................................ 15

5.8.3 Automatic coupling ....................................................................................................... 15

5.8.4 LED status .................................................................................................................... 15

6 Troubleshooting .......................................................................... 16

7 Spares and accessories .............................................................. 17

8 Technical specifications .............................................................. 18

9 Certification ................................................................................ 18

10 Hotline ......................................................................................... 19

Introduction / Preface1 Congratulations on your new EGO!

EGO TS is the intelligent entry-level solution for telephone use in your car: simple to operate, elegant and compact – with Bluetooth and audio enjoyment too.

The installation of your EGO TS in your car requires specialist knowledge and skills. We recom-mend that the installation be carried out in a qualified professional workshop.

Before installation in your car, please make sure that your mobile phone is fully compatible with EGO TS. If you are uncertain, please consult your dealer or a professional workshop. Our service team will also be happy to help you with any information you may require. You can find further information on compatibility between EGO TS and various mobile phones on our website.

2 | 3

EGO TS

Safety Instructions2

Incorrect installation1. – Incorrect installation may lead to damage to the units and/or your car! Special knowledge and skills are required for installing the system. We strongly recom-mend that the system be installed by a qualified professional workshop.

2. Risk of injury – Unsuitable installation locations may become a source of injury in an acci-dent situation, or may inhibit the correct functioning of essential safety equipment. Please read the notes in the „Installation“ chapter carefully!

3. Risk of injury/material damage – the removal of cladding within the vehicle with sharp or pointed tools may lead to injuries or material damage.

4. Road safety risk – Distracted attention can lead to dangerous situations in traffic. Even when using hands-free phone sy stems, your complete attention must be concentrated on your driving and other road users. It is always advisable to do without phone calls in difficult traffic situations!

5. Damage to airbags – The wrong choice of location for installation may cause damage to or inhibit the correct function of your airbags. Always install the components in a position where they will not hinder the correct operation of airbags!

6. Insulation damage – Damaged insulation can lead to equipment and wiring damage. The ca-bles and leads may not be under tension when installed. Install the cables and leads in such a way as to avoid pinching or abrasion.

7. Polarity and shorting damage – Cables connected with reversed polarity, or in such a way as to produce a short circuit, can lead to serious damage to your equipment. Before com-mencing installation, make sure that the car battery is disconnected.

8. Damage to essential vehicle components – Essential vehicle components or wiring can be damaged when drilling mounting holes or screwing in self-threading screws. Please make sure there is always sufficient space behind the screw holes and drilled holes!

9. Interference with on-board electronics – Despite the extreme protection against interfe-rence, incorrect installation can lead to interference with the vehicle electronic systems. Please read the vehicle manufacturer’s notes to this effect!

Appropriate use10. – This equipment is intended solely for use with mobile telephones in motor vehicles.

11. Damage caused by inappropriate replacement parts – Inappropriate spare or replacement parts may lead to malfunctions. Please use only the approved parts listed in the section „Spares and accessories“!

Road safety risk12. – For your own safety, never initiate the coupling procedure while your vehicle is in motion!

Conformity statement3 This equipment employs Bluetooth® wireless technology. In some countries, the use of this equipment may be restricted or forbidden. Please make sure you are familiar with such restric-tions and do not use your equipment if you are unsure whether its use is permitted in particular countries you may be visiting.

Bluetooth® is a registered brand name of Bluetooth SIG, Inc.

The firm of Funkwerk Dabendorf GmbH Märkische Straße D-15806 Dabendorf

herewith declares that the hands-free system „EGO TS“

in accordance with the essential requirements and other relevant provisions of the Directive 1999/5/EC.

0681

4 | 5

EGO TS

Scope of Delivery / Package content4

À Electronics boxÁ Control unit Microphoneà Extension cableÄ Quick Guide

À

Á

Â

ÃÄ

Installation instructions5

Improper InstallationImproper installation may cause damages to the unit or to the vehicle! The installation of the hands-free car kit requires special knowledge and special abilities. Short circuits or cables connected in reverse polarity can cause severe damage to the unit. Ensure the vehicle’s battery is disconnected before you start the installation procedure. We therefo-re recommend to have the installation done by a professional.

Preparation5.1 Test audio system -Place protective covers on seats etc. -Turn Off ignition -

Installation locations5.2

RISK OF INJURY!Unsuitable installation locations may become a source of injury in an accident situation, or may inhibit the correct functioning of essential safety equipment!

Checking cable lengths5.2.1 Before you fix the components securely, check that the installation locations have been selected in such a way that the length of the cables is sufficient to connect the individual components.

Selection of the installation location for the electronics box5.2.2 The Bluetooth® antenna for the connec-tion to the mobile phone is installed in the electronics box. The antenna trans-mits directionally towards the front. For this reason, during installation, ensure that the antenna faces into the passen-ger cell (see Fig.). Vertical mounting is ideal. Metallic screening between the front panel and the passenger cell, such as metal or metallised plastic panels, are unsuitable and may interfere with the Bluetooth® connection. Locations behind the dashboard or in a metal-lined glove compartment are also unsuitable.

A covering in plastic, fabric or wood presents no problems whatsoever

6 | 7

EGO TS

Suitable locations for the electronics box:

- Passenger side, next to the centre column under the panelling, model-specific installation console (dealer)- Our suggested installation locations are shown in the illustration on the right

Further unsuitable locations are:

Leg and knee height, potential head impact zone, airbag inflation space, engine compartment

Selection of the point of installation for the microphone5.2.3 Suitable for the microphone:

- where voice can reach the microphone unhindered (distance between the spea-ker and the microphone should be ap-prox. 35 cm), on the A-column (between windscreen and side window), next to the driver‘s sun visor, on the dashboard

The illustration shows one of the po-tential microphone mounting locations. Alternatively, the microphone may be attached to the sun visor with the clip provided.

Unsuitable for the microphone:

-Close to the speakers (less than 80 cm), under the dashboard, in the air stream from open windows or ventilator outlets

Mounting Components5.3

DAMAGE TO ESSENTIAL VEHICLE COMPONENTS!Essential vehicle components or wiring can be damaged when drilling mounting holes or screwing in self-threading screws. Please make sure there is always sufficient space behind the screw holes and drilled holes!

Mounting the electronics box5.3.1

Define the mounting points

Making sure that there is at least 70 mm space for the plug and socket connectors. Mark the posi-tions for the fixing screws.

Mounting the electronics box

For mounting the electronics box, use four self-threading screws and appropriate washers. We recommend size “ST 2,9x25 DIN 7981”self-threading screws. These are ideal for the fixing of the electronics box. Pre-drill the holes with a 2 mm drill.

Mounting the microphone5.3.2 Define the mounting location

The microphone holder has a self-adhesive strip on the back. The mounting location should have the same form and area as the self-adhesive strip on the microphone holder. The location selected must allow the microphone cable to reach the electronics box! Locate the microphone with its head in the direction of speech.

Cleaning and degreasing the mounting location

The mounting location must be clean and free from grease and dirt/dust. Clean the proposed area with a cleansing product such as methylated spirits. Only use cleansing products that do not damage plastics or varnished wood finishes and are themselves free of oils or grease. Unsuitable cleansers are, for example,: lighter fluid, acetone, turpentine, trichloroethylene and similar products.

Attaching the microphone holder

Peel off the protective backing from the self-adhesive strip. Hold the microphone holder at a distance of several millimetres above the desired mounting location. Recheck the positioning. Repositioning after mounting is no longer possible. Place the microphone holder on the moun-ting location and fix by applying short and light pressure.

Attaching the microphone

Attach the microphone by sliding it into the holder and orientate the microphone head in the direction of speech.

130 mm

45 m

m70

mm

8 | 9

EGO TS

Connection Concept5.4

Installation of the components5.5

In order not to cause any damage while dismantling the interior panelling it is advisable to use the so-called dismantling wedges! These leave no marks on the plastic parts!

Carefully dismantle the panelling 1. on the left and right next to the radio/navigator.

Loosen the mounting screws and 2. remove the control unit.

Microphone Mounted charger

(optional)

Control unit Connection cable

Loosen the screws of the navigation system panelling below the control unit.3.

Now remove the panelling of the radio/navigation system. Loosen the screws of the radio 4. on the left and right and carefully pull the radio out of the slot. Then remove the connectors from the radio.

Loosen the screws of the speedometer unit panelling and the steering column to dismantle 5. the speedometer unit.

10 | 11

EGO TS

Now remove the panelling.6.

Loosen the screws of the speedometer unit and remove it carefully.7.

Position the electronic box and lay the connection cable. Please pay attention to our explana-8. tory notes on the point of installation of the electronic box in Chapter 5.2.2.

Choose a free installation slot for the EGO TS control unit. Carefully remove the covering and 9. replace it by the control unit.

* Control panel element on the left next to the steering wheel.

Lay the microphone at a convenient spot, pay attention to our explanatory notes in 10. Chapter 5.2.3.

Connect the adapter cables specific for the car to the radio.11.

NOTE: To prevent rattling sounds that may possibly occur we recommend that the cables be fastened with cable straps and to position the electronic box tightly in the car.

12 | 13

EGO TS

Functional Test5.6 An operational test is only possible after coupling the system with a Bluetooth®- compatible device. The procedure is explained in the sections „5.8. Getting started“.

Symbols5.7 The control console of the EGO TS has a total of 4 keys. The illustration on the right shows an overview of the key locations. The functions of the individual keys are explained in the following section.

Key functions5.7.1

→ The -key (green) is for accepting calls. It also controls the redial function, private mode and connect manually.

→ The -key (red) is used for rejecting incoming calls and ending completed calls (hang-up). It also controls the starts the phone‘s voice dialling function.

→ The -key increases the volume in phone.

→ The -key decreases the volume in phone.

Getting started5.8 Take enough time to familiarise yourself with the use of the system in combination with your phone. First of all, make a few calls to determine the ideal volume and the best voice pick-up di-rection before using the system in traffic. The best way of optimising conditions of use is to park your car in a quiet place especially for this purpose. It is also helpful if another phone user can take some time to assist you when making test calls.

On / Off function5.8.1 Turning the ignition key simultaneously activates the hands-free system. Immediately after the system is activated, the two LEDs blink 4 times. This indicates that the system is in standby mode and ready to make a connection. In order to use the system for phone calls, a Bluetooth® compatible phone must be coupled to the EGO TS system. How this is done is explained in detail in the following sections. When the ignition is turned off, the hands-free system also shuts down. If the ignition is turned off during a call, phone ability is maintained and the system is shut down only after the call has been completed.

Coupling5.8.2 As long as no device is connected, the system is visible for all Bluetooth - ® devices.The device to be used (mobile phone, PDA, etc.) must be logged in to the system. -

The Bluetooth® search and coupling are carried out by the device. The name of the system is EGO TS.

The PIN has a default setting of 0000. -Bei erfolgreicher Verbindung/Kopplung leuchten beide LED‘s dauerhaft. -It can be 8 Bluetooth - ® phones be connected.

Automatic coupling5.8.3 If a phone is already connected with the system, the EGO TS tries to couple to this phone. When a connection has been successfully made, the two LEDs are permanently on. The connection is always made to the most recently coupled phone. If this phone is out of range, the system will search for other phones registered in the system. When the search is successful, the connection to this phone is completed automatically. If the search process was unsuccessful, the system reverts to the coupling mode. This enables manual connection from the phone.

LED status5.8.4 Green blinks in short intervals → no device connected -Both permanently on → device is connected -Red on and green blinks periodically → active call -

14 | 15

EGO TS

Troubleshooting6

Problem Cause Correction

EGO TS doesn‘tswitch on

Power supply disabled If necessary, replace fuse and check all leads and connections

Ignition not on Switch ignition on

Ignitions circuit disabled Check cable and 1 A fuse

Your call-partner can-not hear you Microphone not plugged in

Connect microphone to electronics box, defective cables require replace-

ment

Your call partner com-plains about interfe-

rence

Microphone in air stream Mount microphone elsewhere or reduce ventilation

Phone too close to EGO TScomponents or car radio

Increase the distance between your phone and

the EGO TS or radio

Your call partner hears feedback

Distance between micro-phone and speakers too

small

Increase distance or decrease volu-me

Volume too high Decrease volume

Your phone cannot findEGO TS during coupling

EGO TS already connected to another device Disconnect existing connection

Sound is unclear, dis-torted

Poor Bluetooth® connec-tion

Reduce the distance between your phone and the EGO TS or remove any

(metallic) obstructions

No connection to coupled phone when ignition switched on

Phone is out of range. Make sure your phone is within the range of the EGO TS.

Phone Bluetooth® inter-face is deactivated.

Switch phone Bluetooth® function to ”ON“ (Option ”Automatic“ is not suffi-

cient)

Phone requires confirmati-on of connection set-up.

Confirm connection on your phone. Deactivate security function (see

your phone manual)

One of the two devices no longer has a valid connec-

tion code.Repeat the coupling procedure.

Spares and accessories7 Spares

À Electronics boxÁ Control unit Microphoneà Extension cable

Accessories

Specific vehicle connection cable

À

Á

 Ã

Variant Vehicle Equipment Connecting cable

ACorolla E12 Standard MY2001>2004 Toyota

DENGS-00982-07FWD 1284-01000

Land Cruiser J12 StandardHilux KUN 15/25 Option Wide2DIN (TNS310)

B

Avensis T25Standard

Toyota DENGS-00983-07FWD 1284-02000

Full Map NavigationYaris XP9 Standard

Corolla Verso R10Standard MY2004>Full Map Navigation

Corolla E12StandardFull Map Navigation

Prius

RAV4 A3StandardFull Map Navigation

Hilux KUN 15/25 Standard SOL (MP3)

AurisStandardFull Map Navigation

HIACEAvensis T27 StandardVerso Standard

C Land Cruiser J12 Full Map NavigationToyota

DENGS-00984-07FWD 1284-03000

E IQ StandardToyota

DENGS-01410-07FWD 1284-05000

16 | 17

EGO TS

Technical specifications8

External dimensions: Electronics box (L x B x H) 130 mm x 45 mm x 23 mm

External dimensions: Control unit (L x B x H) TS 1 33,7 mm x 22,9 mm x 26,6 mm

TS 2 42,2 mm x 24,2 mm x 20,8 mm

TS 3 39,3 mm x 20,8 mm x 24,2 mm

Cable length: Control unit 230 mm

Operating voltage 11 V to 15 V

Quiescent current (ignition off) max. 0,1 mA

Fuse: Permanent positive 2 A

Fuse: Ignition 1 A

Temperature range -10 °C bis +55 °C

Supported Bluetooth® Profiles: Handsfree

Certification9

0681Fully compliant with the EU R&TTE Directive 1999/5/EC

Model certification according to EU Directive 72/245/EWG (2006/28/EC) “Electromagnetic com-patibility in motor vehicles”

Bluetooth® is a registered brand name of Bluetooth SIG, Inc.

Hotline10 Any questions or suggestions? Would you like some more detailed information? Do you need an adviser or service in your area? Just give us a call!

Our Hotline Team is there to help you at the following times:

Monday–Thursday from 7.00 a.m. to 5.00 p.m. Friday from 7.00 a.m. to 4.00 p.m.

Before you call us with your problem, please check first with the following steps:

→ Check whether you can solve your problem with the „Troubleshooting“ checklist in chapter.→ Try to explain your problem as precisely as possible.

You can contact our Hotline Team at the following numbers:

From Germany: Phone: 0800 - 0 393 393

From outside Germany: Phone: +49 (0) 3377 - 316 233 +49 (0) 3377 - 316 234 Fax: +49 (0) 3377 - 316 244

18 | 19

EGO TS

Funkwerk Dabendorf GmbH

Märkische Straße

D-15806 Dabendorf

Germany

Phone +49 (0) 3377 316 - 0

Fax +49 (0) 3377 316 - 300

Email info@fwd-online.de service@fwd-online.de

Internet www.fwd-online.de A Funkwerk AG company.

Funkwerk Dabendorf reserves the right to modifications in the course of technological progress and deviations from the delivery scope! All rights reserved! Reproduction, in whole or in part, is only permitted with the prior written consent of Funkwerk Daben-dorf GmbH!