copper supreme special blend plus -...

B E S T O L I F E . C O M

2777 N. Stemmons Fwy, Suite 1800 • Dallas, TX 75207 • (855) 243-9164

C O P P E R B A S E D

D R I L L I N G C O M P O U N D

5 Gallon Plastic Pail

*API RP 7A1: “Recommended Practice for Testing of Thread Compound for Rotary-Shouldered Connections” NOTE: Due to operation and equipment variables, this value may require adjustment based on field experience.

A safety data sheet is available from the manufacturer. Do not use on oxygen lines or in oxygen enriched atmosphere.

COPPER SUPREME SPECIAL BLEND® PLUS

PRODUCT NUMBER

CONTAINER SIZE

CONTAINER WEIGHT

635011 1 gallon 10 pounds plastic

635017 3 1/2 gallon 30 pounds plastic


DESCRIPTIONBESTOLIFE Copper Supreme Special Blend® Plus (CSSB PLUS) adds a proprietary corrosion inhibitor to the original CSSB formula, providing excellent storage protection in addition to its superior running capabilities. CSSB PLUS guards against corrosion, resists washout, and will not harden or bleed excessively in storage.

APPLICATIONSHigh temperature compound for drill collars and drill pipe with storage protection. Recommended for all drilling applications (rotary-shouldered connections), including high temperature environments. It is also effective for use on slides, jacking systems, cantilever type rigs and assemblies.

TECHNICAL DATACSSB PLUS contains copper flake combined with a proprietary blend of amorphous and synthetic graphite, oxidation, corrosion, and H2S inhibitors, in a high temperature base grease. API and IADC tables for drill collars and drill pipe are minimum torque values. BESTOLIFE recommends an additional 10-15% torque beyond the minimum torque specified by these tables be applied, to ensure maximum performance and protection when using BESTOLIFE copper compounds.

PRODUCT CHARACTERISTICSColor: Copper

Penetration:(ASTM D217) 310-330

NLGI Grade: 1

Weight/Gallon: 10.2 pounds/gallon

Thickener: Lithium Complex

Dropping Point: (ASTM D2265) ≥500°F (≥260°C)

Flash Point: 399°F (204°C)

Brushable To: 15°F (-9°C)

Service Rating: 600°F (316°C)

Friction Factor: 1.1*

Salt Spray Test:(ASTM B117) ≥2500 Hours

Contains: Copper flake, synthetic and amorphous graphite and other nonmetallic additives

PACKAGING

Note: All package sizes are not listed. Call your sales representative for a complete listing.

Rev.02 10/16





5 Gallon Metal Pail



COPR 99

CONTAINER SIZE

CONTAINER WEIGHT

PRODUCT NUMBER

1 gallon 10 pounds plastic655510



5 gallon 45 pounds metal655546

DESCRIPTIONBESTOLIFE Copr 99 is a lead-free, zinc-free thread compound for rotary-shouldered connections. It provides galling and seizing protection and support for high bearing stress. It applies easily in a wide range of temperatures and conditions, resists washout, and will not harden or bleed excessively in storage.

APPLICATIONSEconomical copper/PTFE compound for rotary-shouldered connections. Recommended for all drilling applications (rotary-shouldered connections). It is also effective for use on slides, jacking systems, cantilever type rigs, and assemblies.

TECHNICAL DATACopr 99 meets or exceeds environmental restrictions and exposure concerns associated with the use of lead and zinc drill collar/tool joint thread compounds. It contains copper flake combined with a proprietary blend of graphite and other solids in a high-quality lubricating base grease. API and IADC tables for drill collars and drill pipe are minimum torque values. BESTOLIFE recommends an additional 10-15% torque beyond the minimum torque specified by these tables be applied, to ensure maximum performance and protection when using BESTOLIFE copper

compounds.



NLGI Grade: 1Weight/Gallon: 9.9 pounds/gallonThickener: LithiumFluid Type: PetroleumDropping Point: (ASTM D2265) ≥350°F (≥177°C)

Flash Point: ≥392°F (≥200°C)Brushable To: 10°F (-12°C) Service Rating: 500°F (260°C)Friction Factor: 1.0*Contains: Copper, graphite and other nonmetallic additives

PACKAGING

Note: All package sizes are not listed. Call your sales represen-tative for a complete listing.

Rev.02 10/16






**NSF Registration No. 141560 Category Code: H2

A safety data sheet is available from the manufacturer. Do not use on oxygen lines or in oxygen enriched atmospheres.


CAL BRONZE LEAD FREE

PRODUCT NUMBER

CONTAINER SIZE

CONTAINER WEIGHT


655025 3 1/2 gallon 25 pounds metal


DESCRIPTIONBESTOLIFE Cal Bronze Lead Free is a multipurpose thread compound for drill pipe and drill collars in light to medium duty drilling. CBLF can also be used in water well drill pipe, casing or line pipe. NSF Registered.**

APPLICATIONSLead free copper compound for use on drill collars and drill pipe.

TECHNICAL DATACal Bronze Lead Free provides the excellent sealing properties of lead and zinc. The copper flake and graphite provide the resistance to galling and seizing necessary for rotary-shouldered connections. Contains oxidation and H2S inhibitors. Cal Bronze Lead Free has registration from NSF, National Sanitation Foundation.** API and IADC tables for drill collars and drill pipe are minimum torque values. BESTOLIFE recommends an additional 10-15% torque beyond the minimum torque specified by these tables be applied, to ensure maximum performance and protection when using BESTOLIFE copper compounds. Conforms to API RP 5A3 evaporation, oil separation, and copper corrosion requirements.




Flash Point: ≥392°F (≥200°C)Brushable To: 10°F (-12°C) Service Rating: 500°F (260°C)Friction Factor: 1.1*Contains: Copper, graphite, and other nonmetallic additives PACKAGING


Rev.02 10/16






PRODUCT NUMBER

CONTAINER SIZE

CONTAINER WEIGHT



650025 3 1/2 gallon 25 pounds metal


CAL BRONZEDESCRIPTIONBESTOLIFE Cal Bronze (CB) is an all purpose compound for rotary-shouldered connections, casing, and tubing. A copper/lead/zinc based compound, Cal Bronze is recommended for drill collars in light to medium duty drilling, drill pipes, and casing and tubing connections that require a thread compound for high temperature/high pressure conditions.

APPLICATIONSEconomical copper compound for use on drill collars and drill pipe.

TECHNICAL DATABESTOLIFE Cal Bronze is an economical all-purpose drill pipe and drill collar compound developed for hot, rugged, corrosive drilling conditions. Finely powdered lead, copper, zinc and special nonmetallic additives absorb stresses and enhance high-temperature properties. Contains H2S and corrosion inhibitors. API and IADC tables for drill collars and drill pipe are minimum torque values. BESTOLIFE recommends an additional 10-15% torque beyond the minimum torque specified by these tables be applied, to ensure maximum performance and protection when using BESTOLIFE copper compounds.

**The proper field torque for all API casing and tubing con-nections should be determined by following the procedures outlined in API RP 5C1: “Recommended Practice for Care and Use of Casing and Tubing”.





Flash Point: ≥392°F (≥200°C)Brushable To: 10°F (-12°C) Service Rating: 500°F (260°C)Friction Factor: 1.0*, 1.1**Contains: Lead, copper, zinc, graphite and other nonmetallic additives

PACKAGING


Rev.02 10/16








COPPER JOINT LEAD FREE

CONTAINER SIZE

CONTAINER WEIGHT

PRODUCT NUMBER


3 1/2 gallon 25 pounds metal635025


DESCRIPTIONBESTOLIFE Copper Joint Lead Free (CJLF) is a non-lead, non-zinc thread compound for rotary-shouldered connections. Its high copper content allows it to bear high-pressure stress. CJLF applies easily in a wide range of temperatures and conditions, and is resistant to washout. It will not harden or bleed excessively in storage.

APPLICATIONSLead-free answer for drill collars and drill pipe. Recommended for all drilling applications (rotary-shouldered connections). It also is effective for use on open gear jack-up legs.

TECHNICAL DATACopper Joint Lead Free has been developed as an answer to the environmental restrictions and exposure concerns associated with the use of lead and zinc drill collar/tool joint thread compounds. Copper Joint Lead Free has a torque correction factor of 1.1 (10% additional torque required) which will provide additional resistance to down-hole make-up as compared to lead or zinc compounds.It applies easily in a wide range of temperatures and conditions, is resistant to washout and will not harden or bleed excessively in storage. Conforms to API RP 5A3 evaporation, oil separation, and copper corrosion requirements.




Flash Point: ≥392°F (≥200°C)

Brushable To: 10°F (-12°C) Service Rating: 500°F (260°C)Friction Factor: 1.1*Contains: Copper, graphite and other nonmetallic additives PACKAGING


Rev.02 10/16






*API RP 7A 1: “Recommended Practice for Testing of Thread Compound for Rotary-Shouldered Connections” NOTE: Due to operation and equipment variables, this value may require adjustment based on field experience.

COPPER JOINT

CONTAINER SIZE

CONTAINER WEIGHT

PRODUCT NUMBER


3 1/2 gallon 25 pounds plastic630025


DESCRIPTIONBESTOLIFE Copper Joint (CJ) is a copper/lead-based compound for use on rotary-shouldered connections.

APPLICATIONSPremium drill collar and tool joint compound. Recommended for drill collars, tool joints, tubing, fishing tools, line pipe connections, flange connections, gaskets and seals.

TECHNICAL DATABESTOLIFE Copper Joint is a copper, lead, and graphite based compound that seals and protects threaded connections in both high temperatures and high pressures. It can be used on casing and tubing connections as well as drill pipe and collars. Contains H2S inhibitors.

NOTESA safety data sheet is available from the manufacturer. Do not use on oxygen lines or in oxygen enriched atmospheres.

PRODUCT CHARACTERISTICSColor: Dark Copper


NLGI Grade: 1


Thickener: Lithium

Fluid Type: Petroleum






Contains: Copper, lead, graphite and other nonmetallic additives

PACKAGING


Rev.02 10/16




PRODUCT CHARACTERISTICSColor: Copper Penetration: 320-340 (ASTM D 217) NLGI Grade: 1 Weight/Gallon: 11 pounds/gallon Thickener: Complex Fluid Type: Petroleum Dropping Point: ≥500°F/260°C (typ) Flash Point: ≥392°F/200°C (min) Brushable To: 0°F/-18°C Service Rating: 600°F (316°C) Friction Factor: 1.2* Contains: Copper, graphite, and other nonmetallic additives


API and IADC tables for drill collars and drill pipe are minimum torque values. BESTOLIFE recommends an additional 10-15% torque beyond the minimum torque specified by these tables to be applied to ensure maximum performance and protection when using BESTOLIFE copper compounds.

HONEY KOTE™

DESCRIPTIONHONEY KOTE™ from BESTOLIFE is the superior choice when maximum protection against seizing, galling, and load-bearing stress is critical. Specially formulated to resist washout and corrosion while providing ultimate efficiency in higher temperature environments. Also provides long-term storage protection for threaded surfaces in a variety of conditions!

APPLICATIONSHigh temperature compound for drill collars and drill pipe. HONEY KOTE™ is also effective for use as long-term storage protection for threaded surfaces.

TECHNICAL DATA• Grease base with excellent water resistance and

inherent extreme pressure protection

• Superb protection against seizing and galling at more than 54k ft/lbs on NC50 tool joints

• Average break out torque ratio: 89% of makeup

• Successfully pressure tested up to 25,000 psi

• Contains inhibitors to protect against rust and corrosion

• Salt Spray: 2,500 hrs (ASTM B117)

• BESTOLIFE HONEY KOTE™ meets or exceeds the listed performance objectives in API RP 5A3/ISO 13678.



PACKAGING

CONTAINER SIZE

CONTAINER WEIGHT

PRODUCT NUMBER


5 gallon 50 pounds metal659001

Rev.02 6/17



BEARING STRESSBearing stress is the contact pressure between the pin and box at the make-up shoulder. As the tool joint is tightened, the bearing stress at the make-shoulder increases. The maximum bearing stress is the function of the maximum torque and the total area of make-up shoulder.

BESTOLIFE HONEY KOTE™ protected the NC50 tool joint from galling caused by high bearing stresses. The 54,500 ft-lbs. created calculated bearing stress on the make-up shoulder to 143,500 psi.

PRESSURE TESTThe pressure test objective is to show the ability of BESTOLIFE HONEY KOTE™ to seal very high pressure at the make-up shoulder. The test was conducted by increasing pressure incrementally up to 25,000 psi, about 10,000 psi higher than pressure used in fracking operations.



00

2,5005,0007,500

10,00012,50015,00017,50020,00022,50025,00027,50030,000

10 20 30 40 50 60 70 80 90 100

Inte

rnal

Pre

ssur

e (p

si)

Elapsed Time (minutes)

Max Pressure – 25,098 psi

0

10000

20000

30000

40000

5000055000

0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0

0

1

2

3 Turns

Shoulder

RPM

Torq

ue F

t-Lbs

.

HONEY KOTE™





5 Gallon Metal Pail



COPPER SUPREME SPECIAL BLEND®

CONTAINER SIZE

CONTAINER WEIGHT

PRODUCT NUMBER


3 1/2 gallon 30 pounds plastic635034


DESCRIPTIONBESTOLIFE Copper Supreme Special Blend® (CSSB) is a non-

lead, non-zinc compound that applies easily in a wide range

of temperatures and conditions. CSSB is washout resistant

and will not harden or bleed excessively in storage.

APPLICATIONSHigh temperature compound for drill collars and drill pipe.

Recommended for all drilling applications (rotary-shouldered

connections), including high temperature environments. It is

also effective for use on open gear jack-up legs.

TECHNICAL DATACSSB has been developed as an answer to the environmental

restrictions and exposure concerns associated with the use

of lead and zinc drill collar/tool joint thread compounds. In addition to the galling and seizing protection provided

by the solids, it also contains a soluble extreme pressure

package that is surface active and helps to provide the load

carrying capability required by the high bearing stresses

present in rotary-shouldered connections.

NOTESAPI and IADC tables for drill collars and drill pipe are

minimum torque values. BESTOLIFE recommends an

additional 10-15% torque beyond the minimum torque

specified by these tables be applied, to ensure maximum

performance and protection when using BESTOLIFE copper

compounds.

PACKAGING




NLGI Grade: 1


Thickener: Lithium Complex

Fluid Type: Petroleum




Oil Separation: <3.0%

Copper Corrosion: 1A



Contains: Copper flake, synthetic and amorphous graphite and other nonmetallic additives

Rev.02 10/16

copper supreme special blend plus -...

Documents